Z-Power LED X10490 Technical Data Sheet Specification LT700D SSC Drawn Approval Customer Approval Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet Contents 1. Features 2. Absolute Maximum Ratings 3. Electric-Optical Characteristics 4. Reliability Tests 5. Characteristic Diagrams 6. Color & Binning 7. Outline Dimensions 8. Standard of Taping Empty Space 9. Packing 10. Soldering 11. Precaution for use Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet LT700D Description LT700D Features * Non-standoff leads * 5mm type package Lamp LEDs are effective in hot thermal and humid condition. This high brightness * Color Diffused epoxy lens * Viewing angle and weather-resistant packaging design makes these Lamp LEDs ideal for : 50/100 * Dominant Wavelength :525nm Outdoor applications such as traffic signals, variable message signs and backlighting for transparent sign panels. Applications * Electronic signs and signals * Specialty lighting * Small area illumination * Backlighting * Other outdoor displays Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 2. Absolute Maximum Ratings ( Ta = 25C ) Item Symbol Value Unit DC Forward Current IF 30 mA Forward Peak Pulse Current IFP [1] 100 mA Reverse Voltage VR 5 V Power Dissipation PD 125 mW Operating Temperature Topr -30 ~ 85 C Storage Temperature Tstg -40 ~ 100 C Solder Temperature Ts 260C for 10seconds [2] C Notes : [1] t 0.1ms, D = 1/10 [2] No lower than 3mm from the base of the epoxy bulb. 3. Electro-Optical Characteristics ( Ta = 25C, IF=20mA ) Value Item Symbol Unit Min. Typ. Max. Luminous Intensity [3] IV [4] 1000 2200 - mcd Dominant Wavelength[5] d 518 525 530 nm Forward Voltage [6] VF - 3.6 4.0 V View Angle 2 1/2 Reverse Current (at VR = 5V) IR 50 / 100 - - deg. 5 A Notes : [3] SSC maintains a tolerance of 10% on intensity and power measurements. [4] IV is the luminous intensity output as measured with a cylinder. [5] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of 0.5nm for dominant wavelength. [6] A tolerance of 0.05V on forward voltage measurements Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 4. Reliability Tests Item Condition Note Failures Life Test Ta = RT, IF = 30mA 1000hrs 0/22 High Temperature Operating Ta = 85C, IF = 8mA 1000hrs 0/22 Low Temperature Operating Ta = -30C, IF = 20mA 1000hrs 0/22 Thermal Shock Ta = -40C (30min) ~ 100 (30min) (Transfer time : 10sec, 1Cycle = 1hr) 100 cycles 0/40 Resistance to soldering Heat Ts = 255 5C, t = 10sec 1 time 0/22 ESD (Human Body Model) 1kV, 1.5k ; 100pF 1 time 0/22 High Temperature Storage Ta = 100C 1000hrs 0/22 Low Temperature Storage Ta = -40C 1000hrs 0/22 Temperature Humidity Storage Ta = 85C, RH = 85% 1000hrs 0/22 Temperature Humidity Operating Ta = 85C, RH = 85%, IF = 8mA 100hrs 0/22 < Judging Criteria For Reliability Tests > VF USL[1] X 1.2 IR USL X 2.0 V LSL [2] X 0.5 Notes : [1] USL : Upper Standard Level [2] LSL : Lower Standard Level. Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 5. Characteristic Diagrams 2.5 Relative Luminous Intensity Forward Current(mA) Ta= 25C Ta= 25C 50 40 30 20 10 0 1.0 2.0 1.5 1.0 0.5 0.0 1.5 2.0 2.5 3.0 3.5 0 4.0 10 20 30 40 50 Forward Current [mA] Forward Voltage [V] Forward Current vs. Relative Intensity Forward Voltage vs. Forward Current Ta= 25C, IF= 20mA 1.0 40 0.8 Relative Luminous Intensity Forward Current IF [mA] Y X 30 20 10 0 -40 -20 0 20 40 60 80 100 o Ambient Temperature Ta[ C] Ambient Temperature vs. Maximum Forward Current 0.6 0.4 0.2 0.0 -100 -80 -60 -40 -20 0 20 40 60 80 100 Off Axis Angle [deg.] Directivity Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 6. Color & Binning Bin Code Luminous Intensity Dominant Wavelength Forward Voltage U 1 4 Forward Voltage (V) @ IF = 20mA Luminous Intensity (mcd) @ IF = 20mA Dominant Wavelength (nm) @ IF = 20mA Bin Code Min. Max. Bin Code Min. Max. Bin Code Min. Max. S 1000 1500 1 518 522 4 3.0 3.2 T 1500 2000 2 522 526 5 3.2 3.4 U 2000 2600 3 526 530 6 3.4 3.6 V 2600 3600 7 3.6 3.8 8 3.8 4.0 Available ranks Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 7. Outline Dimensions Unit : mm -0.1 0.5 +0.2 1 .0 D E T A IL 2 .4 0 .2 y 5.25 0.2 1 .0 M A X 0 .5 0 .0 5 ANODE 2.5 0.05 x 1 .0 M IN 3 .7 5 0 .2 2 8 .0 M IN 7 .0 6 0 .2 Notes : Protruded epoxy is 1.0mm maximum. 8. Standard of Taping Empty Space Available Empty Space : 2ea Before After Purpose : Prevention of being Mixed & Reverse mounting Before : Insert the right PKG after removing defective product After : Attaching the right PKG on the backside after removing defective product Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 9. Packing Unit : mm * Antistatic poly bag 50 (500pcs max/bag) 95 325 170 * Inner box (1bag max/box) 0 27 * Cardboard box (35000pcs max/box) (70boxes max/box) 480 Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 10. Soldering Profile 1) Wave Soldering Conditions / Profile * Preliminary heating to be at 85C(120 C max) for 20 seconds(60 seconds max). * Soldering heat to be at 255 C (260C max) for 10 seconds * Soak time above 200 C is 5 seconds 300 PEAK 250 200 255 C (260 C max) O Temperature [ C] 10s 150 PREHEAT 20s (60s Max) 100 85 C(120 C max) 50 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 T im e [s ] 2) Hand Soldering conditions * Not more than 3 seconds at max. 350C, under Soldering iron. 3) Caution * Lead frames are silver plated copper alloy. This substance has a low thermal coefficient (easily conducts heat) * The LEDs must not be repositioned after soldering. * Do not apply any stress to the lead particularly when heat. Note : In case the soldered products are reused in soldering process, we don't guarantee the products. Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 11. Precaution for Use 1) Storage * Before opening the package Avoid the absorption of moisture, we recommended to store Lamp LEDs in a dry box(or desiccators) with a desiccant . Otherwise, store them in the following environment: Temperature : 5~30 Humidity : 50% max. * After opening the package a. Soldering should be done right after opening the package(within 24Hrs). b. Keeping of a fraction - Sealing - Temperature : 5 ~ 40, Humidity : less than 30% c. If the package has been opened more than 1week or the color of desiccant changes, Components should be dried for 10-12hr at 605 * Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. * Avoid quick cooling * Leadframes are silver plated SPCC. The silver plate surface may be affected by environments which contains corrosive substances. Please avoid conditions which may cause the LEDs to corrode, tarnish or discolor. 2) Lead Forming * When the lead forming is required before soldering , care must be taken to avoid any bending and mechanical stress. The stress to the base may damage the LEDs. * When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly aligned with the leads of the LEDs. * It is recommended that tooling made to precisely form and cut the leads to length rather than rely on hand operating. Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Z-Power LED X10490 Technical Data Sheet 3) Static Electricity * Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist band or an anti-electrostatic glove be used when handling the LEDs. * All devices, equipment and machinery must be properly grounded. It is recommended precautions be taken against surge voltage to the equipment that mounts the LEDs. 4) Heat Generation * Thermal is one of the important parameter to design the end product. Please consider the heat generation of the LEDs. * The operating current should be decided after considering the ambient maximum temperature of LEDs. 5) Others * The color of the LEDs is changed a little by an operating current and thermal. * Anti radioactive ray design is not considered for the products listed here in. * Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. * This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA(Isopropyl Alcohol) should be used. * When the LEDs are illuminating, operating current should be decided after considering the junction temperature. Cf.) Please refer Ambient temperature vs. Forward Current graph on page 5 * The appearance and specifications of the product may be modified for improvement without notice. SEOUL SEMICONDUCTOR CO., LTD. 148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea TEL : +82-2-3281-6269 FAX :+82-2-857-5430 www.seoulsemicon.com www.zled.com Rev. 03 December 2010 www.seoulsemicon.com : SSC-QP-7-07-24 (Rev.00) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Seoul Semiconductor: LR700D LT700D