Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Specification
LT700D
SSC Customer
Drawn Approval Approval
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Contents
1. Features
2. Absolute Maximum Ratings
3. Electric-Optical Characteristics
5. Characteristic Diagrams
4. Reliability Tests
7. Outline Dimensions
10. Soldering
11. Precaution for use
6. Color & Binning
9. Packing
8. Standard of Taping Empty Space
Z-Power LED X10490
Technical Data Sheet
서식번호 : SSC-QP-7-07-24 (Rev.00)
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
LT700D
• Non-standoff leads
• 5mm type package
• Color Diffused
epoxy lens
• Viewing angle
: 50/100 º
• Dominant Wavelength
:525nm
Features
Applications
Description
LT700D
Lamp LEDs are effective in hot thermal
and humid condition. This high brightness
and weather-resistant packaging design
makes these Lamp LEDs ideal for
Outdoor applications such as traffic
signals, variable message signs and
backlighting for transparent sign panels. • Electronic signs
and signals
• Specialty lighting
• Small area illumination
• Backlighting
• Other outdoor displays
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
3. Electro-Optical Character istics ( Ta = 25ºC, IF
=20mA )
2. Absolute Maximum Ratings ( Ta = 25ºC )
Notes :
[1] t≤0.1ms, D = 1/10
[2] No lower than 3mm from the base of the epoxy bulb.
Notes :
[3] SSC maintains a tolerance of ±10% on intensity and power measurements.
[4] IV is the luminous intensity output as measured with a cylinder.
[5] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram.
A tolerance of ±0.5nm for dominant wavelength.
[6] A tolerance of ±0.05V on for ward voltag e measurements
Item Symbol Value Unit
DC Forward Current IF30 mA
Forward Peak Pulse Current IFP [1] 100 mA
Reverse Voltage VR5 V
Power Dissipation PD125 mW
Operating Temperature Topr -30 ~ 85 ºC
Storage Temperature Tstg -40 ~ 100 ºC
Solder Temperature Ts260ºC for 10seconds [2] ºC
Item Symbol Value Unit
Min. Typ. Max.
Luminous Intensity [3] IV [4] 1000 2200 -mcd
Dominant Wavelength[5]
λ
d518 525 530 nm
Forward Voltage [6] VF-3.6 4.0 V
View Angle 2
θ
½50 / 100 deg.
Reverse Current (at VR = 5V) IR- - 5
μ
A
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
4. Reliability Tests
< Judging Criteria For Reliability Tests >
VFUSL[1] X 1.2
IRUSL X 2.0
Ф
VLSL [2] X 0.5
Notes :
[1] USL : Upper Standard Level
[2] LSL : Lower Standard Level.
Item Condition Note Failures
Life Test Ta = RT, IF = 30mA 1000hrs 0/22
High Temperature Operating Ta = 85ºC, IF = 8 mA 1000hrs 0/22
Low Temperature Operating Ta = -30ºC, IF = 20mA 1000hrs 0/22
Thermal Shock Ta = -40ºC (30min) ~ 100º (30min)
(Transfer time : 10sec, 1Cycle = 1hr) 100
cycles 0/40
Resistance to soldering Heat Ts = 255 ±
5ºC, t = 10sec 1 time 0/22
ESD
(Human Body Model) 1kV, 1.5kΩ
; 100pF 1 time 0/22
High Temperature Storage Ta = 100ºC 1000hrs 0/22
Low Temperature Storage Ta = -40ºC 1000hrs 0/22
Temperature Humidity
Storage Ta = 85ºC, RH = 85% 1000hrs 0/22
Temperature Humidity
Operating Ta = 85ºC, RH = 85%, IF = 8mA 100hrs 0/22
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
5. Characteristic Diagrams
Forward Current vs. Relative Intensity
0 1020304050
0.0
0.5
1.0
1.5
2.0
2.5
Relative Luminous Intensity
Fo rw a rd C u rren t [m A ]
-40 -20 0 20 40 60 80 100
0
10
20
30
40
Forward Current IF [mA]
Ambient Temperature Ta[oC]
Ta
= 25ºC
Ambient Temperature
vs. Maximum Forward Current
Forward Voltage vs. Forward Current
Ta
= 25ºC
1.0 1.5 2.0 2.5 3.0 3.5 4.0
0
10
20
30
40
50
Forward Current(mA)
Forward Voltage [V]
Directivity
Ta
= 25ºC, IF
= 20mA
-100 -80 -60 -40 -20 0 20 40 60 80 100
0.0
0.2
0.4
0.6
0.8
1.0 Y
X
Relative Luminous Intensity
Off Axis Angle [deg.]
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Available ranks
6. Color & Binning
Bin Code
Luminous
Intensity Dominant
Wavelength Forward Voltage
U 1 4
Luminous Intensity (mcd)
@ IF = 20mA
Bin
Code Min. Max.
S1000 1500
T1500 2000
U2000 2600
V2600 3600
Dominant Wavelength (nm)
@ IF = 20mA
Bin
Code Min. Max.
1518 522
2522 526
3526 530
Forward Voltage (V)
@ IF = 20mA
Bin
Code Min. Max.
43.0 3.2
53.2 3.4
63.4 3.6
73.6 3.8
83.8 4.0
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
7. Outline Dimensions
Notes : Protruded epoxy is 1.0mm maximum.
Unit : mm
1.0 MIN
2.5 ± 0.05
2 8 .0 M IN 7.06 ± 0.2
1.0
DETAIL
ANODE 0.5 ± 0.05
0.5 -0.1
+0.2
1.0 M AX
2.4 ± 0.2
3.75 ± 0.2
5.25 ± 0.2
x
y
8. Standard of Taping Empty Space
Before After
Available Empty Space : 2ea
＊Purpose : Prevention of being Mixed & Reverse mounting
※Before : Insert the right PKG after removing defective product
※After : Attaching the right PKG on the backside after removing defective
product
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
9. Packing
480
325
270
(1bag max/box)
* Inner box
Unit : mm
95
170
50
* Antistatic poly bag
(35000pcs max/box)
(70boxes max/box)
* Cardboard box
(500pcs max/bag)
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
10. Soldering Profile
1) Wave Soldering Conditions / Profile
• Preliminary heating to be at 85ºC(120 ºC max) for 20 seconds(60 seconds max).
• Soldering heat to be at 255 ºC (260ºC max) for 10 seconds
• Soak time above 200 ºC is 5 seconds
2) Hand Soldering conditions
• Not more than 3 seconds at max. 350ºC, under Soldering iron.
3) Caution
• Lead frames are silver plated copper alloy. This substance has a low thermal coefficient
(easily conducts heat)
• The LEDs must not be repositioned after soldering.
• Do not apply any stress to the lead particularly when heat.
0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36
0
50
100
150
200
250
300
Temperature [OC]
Time[s]
PREHEAT
20s (60s Max)
85 ºC(120 ºC max)
PEAK
10s
255 ºC (260 ºC max)
Note : In case the soldered products are reused in soldering process, we don’t guarantee the products.
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
11. Precaution for Use
1) Storage
• Before opening the package
Avoid the absorption of moisture, we recommended to store Lamp LEDs in a dry
box(or desiccators) with a desiccant . Otherwise, store them in the following environment:
Temperature : 5 ℃~30 ℃
Humidity : 50% max.
• After opening the package
a. Soldering should be done right after opening the package(within 24Hrs).
b. Keeping of a fraction
- Sealing
- Temperature : 5 ~ 40 ℃, Humidity : less than 30%
c. If the package has been opened more than 1week or the color of desiccant changes,
Components should be dried for 10-12hr at 60 ±5 ℃
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
• Avoid quick cooling
• Leadframes are silver plated SPCC. The silver plate surface may be affected by
environments which contains corrosive substances. Please avoid conditions which may cause
the LEDs to corrode, tarnish or discolor.
2) Lead Forming
• When the lead forming is required before soldering , care must be taken to avoid any bending
and mechanical stress. The stress to the base may damage the LEDs.
• When mounting the LEDs onto a PCB, the holes on the circuit board should be exactly
aligned with the leads of the LEDs.
• It is recommended that tooling made to precisely form and cut the leads to length rather than
rely on hand operating.
Z-Power LED X10490Z-Power LED X10490
Technical Data Sheet
Rev. 03
Rev. 03
December 2010
December 2010
www.seoulsemicon.com
www.seoulsemicon.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
3) Static Electricity
• Static Electricity and surge voltage damage the LEDs. So it is recommended that a wrist
band or an anti-electrostatic glove be used when handling the LEDs.
• All devices, equipment and machinery must be properly grounded.
It is recommended precautions be taken against surge voltage to the equipment that mounts
the LEDs.
4) Heat Generation
• Thermal is one of the important parameter to design the end product. Please consider the heat
generation of the LEDs.
• The operating current should be decided after considering the ambient maximum temperature
of LEDs.
5) Others
• The color of the LEDs is changed a little by an operating current and thermal.
• Anti radioactive ray design is not considered for the products listed here in.
• Gallium arsenide is used in some of the products listed in this publication. These products
are dangerous if they are burned or smashed in the process of disposal. It is also dangerous
to drink the liquid or inhale the gas generated by such products when chemically disposed.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA(Isopropyl Alcohol) should be used.
• When the LEDs are illuminating, operating current should be decided after considering the
junction temperature.
Cf.) Please refer Ambient temperature vs. For ward Current graph on page 5
• The appearance and specifications of the product may be modified for improvement without
notice.
SEOUL SEMICONDUCTOR CO., LTD.
148-29, Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL : +82-2- 3281-6269 FAX :+82-2-857-5430
www.seoulsemicon.com www.zled.com
