ERL Industrial www.vishay.com Vishay Dale Metal Film Resistors, Industrial / High Reliability FEATURES * Same materials and construction as the MIL-PRF-39017 resistors * 100 % stabilization and screening tests. Undergoes group A testing to MIL-PRF-39017 (power conditioning, short time overload, DC resistance) prior to shipping. * Epoxy coated construction provides superior moisture protection * Traceability of materials and processing * Very low noise (-40 dB) * Vishay Dale has complete capability to develop specific reliability programs designed to customer requirements * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS POWER RATING P70 C W MAXIMUM WORKING VOLTAGE (1) V ERL05..500 0.125 200 ERL07..500 0.25 250 GLOBAL MODEL ERL20..500 ERL32..500 ERL62..500 0.5 350 1.0 500 2.0 500 Note (1) Continuous working voltage shall be RESISTANCE RANGE TOLERANCE % TEMPERATURE COEFFICIENT ppm/C 4.7 to 1M 1, 2 100 1.1M to 22M 2, 5, 10 200 1 to 10M 1, 2 100 11M to 22M 2, 5, 10 200 4.3 to 3.01M 1, 2 100 3.3M to 22M 2, 5, 10 200 1 to 2.7M 1, 2 100 3M to 22M 2, 5, 10 200 10 to 2.7M 1, 2, 5, 10 100 3M to 22M 1, 2, 5, 10 200 P x R or maximum working voltage, whichever is less. TECHNICAL SPECIFICATIONS PARAMETER UNIT CONDITION Voltage Coefficient, max. ppm/V 5/V when measured between 10 % and full rated voltage VAC ERL05-500 = 300; ERL07-500 and ERL20-500 = 500; ERL32-500 = 1000; ERL62-500 = 900 Insulations Resistance Dielectric Strength 109 min. dry; 1011 min. after moisture test Operating Temperature Range C -65 to +150 Terminal Strength lb Solderability Weight Revision: 15-Mar-16 2 lb pull test on ERL05-500; 5 lb pull test on all other sizes Continuous satisfactory coverage when tested in accordance with MIL-STD-202, method 208 g ERL05-500 = 0.11; ERL07-500 = 0.35; ERL20-500 = 0.75; ERL32-500 = 1.05; ERL62-500 = 1.30 Document Number: 31105 1 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ERL Industrial www.vishay.com Vishay Dale GLOBAL PART NUMBER INFORMATION New Global Part Numbering: ERL0721K500FKEA500 (preferred part numbering format) E R L 0 7 2 1 K 5 0 0 F GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMPERATURE COEFFICIENT ERL05 ERL07 ERL20 ERL32 ERL62 R= K = k M = M 1R0000 = 1 33K000 = 33 k 10M000 = 10 M F=1% G=2% J=5% K = 10 % K = 100 ppm N = 200 ppm K E A 5 0 0 PACKAGING SPECIAL EK = lead (Pb)-free, bulk EA = lead (Pb)-free, T/R (full) EB = lead (Pb)-free, T/R (1000 pieces) (dash number) 500 = industrial Note * For additional information on packaging, refer to the Through Hole Resistor Packaging document (www.vishay.com/doc?31544). DIMENSIONS in inches (millimeters) E (1) A C (Max.) D B Note (1) Lead length for product in bulk pack. For product supplied in tape and reel, the actual lead length would be based on the body size, tape spacing and lead trim. VISHAY DALE MODEL A B C (Max.) D E ERL05-500 0.150 0.020 (3.81 0.51) 0.066 0.008 (1.68 0.21) 0.187 (4.75) 0.016 0.002 (0.41 0.05) 1.25 0.266 (31.75 6.76) ERL07-500 0.250 + 0.031 - 0.046 (6.35 + 0.79 - 1.17) 0.090 0.008 (2.29 0.21) 0.300 (7.62) 0.025 0.002 (0.64 0.05) 1.50 0.125 (38.10 3.18) ERL20-500 0.375 0.041 (9.53 1.04) 0.138 0.023 (3.51 0.58) 0.450 (11.43) 0.032 0.002 (0.81 0.05) 1.50 0.125 (38.10 3.18) ERL32-500 0.562 0.031 (14.27 0.79) 0.190 0.015 (4.83 0.38) 0.625 (15.87) 0.032 + 0.002 - 0.001 (0.81 + 0.05 - 0.03) 1.50 0.125 (38.10 3.18) ERL62-500 0.562 + 0.031 - 0.042 (14.27 + 0.79 - 1.07) 0.230 0.015 (5.84 0.38) 0.650 (16.51) 0.032 + 0.002 - 0.001 (0.81 + 0.05 - 0.03) 1.50 0.125 (38.10 3.18) MATERIAL SPECIFICATIONS Element Vacuum-deposited nickel-chrome alloy Core Fire-cleaned high purity ceramic Encapsulation Specially formulated epoxy compound Termination Standard lead material is solder-coated copper. Solderable and weldable per MIL-STD-1276, Type C. Revision: 15-Mar-16 POWER RATING Power ratings are based on the following two conditions: 1. 2.0 % maximum R in 2000 h load life 2. +150 C maximum operating temperature APPLICABLE MIL-SPECIFICATIONS MIL-PRF-39017: With the exception of the MIL spec's 3 % lead (Pb) requirement, the industrial ERL series would meet the electrical, environmental and dimensional requirements of MIL-PRF-39017. Document Number: 31105 2 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ERL Industrial 120 Vishay Dale ERL05-500 ERL07-500 100 ERL20-500 80 ERL32-500, ERL62-500 60 RATED POWER IN % HEAT RISE (C ABOVE AMBIENT) www.vishay.com 120 100 80 60 40 40 20 20 0 0 0.125 0.25 0.375 0.5 0.625 THERMAL RESISTANCE 0.75 0.875 1 1.125 APPLIED POWER IN W 0 - 65 - 50 - 25 0 25 50 75 100 125 150 175 200 70 AMBIENT TEMPERATURE IN C DERATING MARKING Partial model (for 05 size): L = ERL Tolerance (for 05 size): F = 1 %, G = 2 %, J = 5 %, K = 10 % Temperature coefficient: T00 = 200 ppm, T1 = 100 ppm ERL05-500: (4 lines) L500 49R9 FT1 1540 Partial model and dash number Value Tolerance and TC 4-digit date code Revision: 15-Mar-16 ERL07-500: (4 lines) 07-500 51.0 2 % T1 1534 Size and dash number Value Tolerance and TC 4-digit date code ERL20-500, ERL32-500, ERL62-500: (5 lines) ERL20 -500 3.01K 1 % T1 1521 Full model and size Dash number Value Tolerance and TC 4-digit date code Document Number: 31105 3 For technical questions, contact: ff2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2019 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 01-Jan-2019 1 Document Number: 91000