450-043 Qwik-Ty Strain Relief - Connector Designator H 45 (R) Rotatable Coupling (Straight, 45 and 90 Elbows) for MIL-DTL-38999 Series III& IV Connectors 450 H S 043 M 16 G CONNECTOR DESIGNATOR H Product Series Ground Lug (Omit for none) Connector Designator Shell Size (Table I) Angle and Profile A = 90 B = 45 S = Straight Finish ( Table II) Anti-Decoupling Device A Thread Typ Basic Part Number .140 (3.6) Dia (Typ.) C D Ground Lug (Optional) B Typ .690 (17.5) Max F E Knurl Style Mfr. Option F SYMBOL S - STRAIGHT ROTATABLE COUPLING SYMBOL B - 45 ROTATABLE COUPLING Use MS3367-1 Tie Strap or F Equivalent (Typical) SYMBOL A - 90 ROTATABLE COUPLING See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: CONNECTOR SHELL SIZE AND DIMENSIONS Shell Size 09 11 13 15 17 19 21 23 25 A Thread I.S.O. Metric M12 X 1.90 - 6H M15 X 1.90 - 6H M18 X 1.90 - 6H M22 X 1.90 - 6H M25 X 1.90 - 6H M28 X 1.90 - 6H M31 X 1.90 - 6H M34 X 1.90 - 6H M37 X 1.90 - 6H B Max .940 (24.8) 1.060 (26.9) 1.170 (29.7) 1.290 (32.7) 1.420 (36.0) 1.540 (39.1) 1.670 (42.4) 2.010 (51.1) 2.120 (53.8) C Max .950 (24.1) 1.000 (25.4) 1.020 (25.9) 1.190 (30.2) 1.190 (30.2) 1.300 (33.0) 1.430 (36.3) 1.520 (38.9) 1.635 (41.5) D Max 1.190 (30.2) 1.190 (30.2) 1.190 (30.2) 1.320 (33.5) 1.320 (33.5) 1.320 (33.5) 1.320 (33.5) 1.320 (33.5) 1.320 (33.5) E Max .890 (22.6) .950 (24.1) 1.010 (25.7) 1.330 (33.8) 1.390 (35.3) 1.460 (37.1) 1.510 (38.4) 1.570 (39.9) 1.640 (41.7) F Cable Entry (See Note 1) .250 (6.4) .382 (9.7) .500 (12.7) .630 (16.0) .750 (19.1) .838 (21.3) .968 (24.6) 1.090 (27.7) 1.220 (31.0) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. (c) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 45 - Page 11 A C* D 08 E 08 F 08 [9] G H J K 08 L 08 S 08 08 [A] 10 11 10 10 A THREAD* REFERENCE 7/16 - 28 UNEF M12 x 1 - 6H 1/2 - 20 UNF 1/2 - 28 UNEF 9/16 - 24 UNEF M15 x 1 - 6H 5/8 - 24 UNEF 5/8 - 28 UN 11/16 - 24 UNEF M18 x 1 - 6H 3/4 - 20 UNEF 13/16 - 20 UNEF M22 x 1 - 6H 7/8 - 20 UNEF 7/8 - 28 UN 15/16 - 20 UNEF M25 x 1 - 6H 1 - 20 UNEF 1 - 28 UN 1 1/16 - 18 UNEF M28 x 1 - 6H 1 1/8 - 18 UNEF 1 1/8 - 28 UN 1 3/16 - 18 UNEF M31 x 1 - 6H 1 1/4 - 18 UNEF 1 1.4 - 28 UN 1 5/16 - 18 UNEF M34 x 1 - 6H 1 3/8 - 18 UNEF 1 3/8 - 28 UN 1 7/16 - 18 UNEF M37 x 1 - 6H 1 1/2 - 18 UNEF 1 1/2 - 28 UN 1 9/16 - UNEF 1 5/8 - UNEF 1 3/4 - 18 UNS 1 7/8 - 16 UN 2 - 18 UNS 2 1/16 - 16 UNS 2 1/8 - 16 UN 2 1/4 - 16 UN 2 5/16 - 16 UNS 2 3/8 - 16 UN 2 1/2 - 16 UN 2 5/8 - 16 UN 2 3/4 - 16 UN 2 7/8 - 16 UN 3 - 16 UN 3 1/16 - 16 UN 09 [A] 08 03 10 10 10 [11] 11 [B] 10 12 [13] 10 [B] 12 12 [13] 12 12 14 14 13 [C] 12 [7] 12 14 12 14 14 [15] 11 [A] 14 [15] 15 [D] 14 [12] 14 16 [17] 13 [B] 14 [D] 16 16 16 16 [17] 16 17 [E] 16 [19] 16 18 15 [C] 16 [E] 18 [27] 18 18 18 18 [19] 18 19 [F] 18 20 17 [D] 18 [F] 20 [37] 20 20 20 20 [21] 20 21 [G] 20 22 19 [E] 20 [G] 22 22 22 22 22 [23] 22 23 [H] 24 22 22 [H] 24 24 24 24 24 [25] 23 [F] 24 25 [J] 61 24 [J] 25 [G] 28 24 28 28 29 [H] 32 33 [J] 32 32 36 36 36 40 40 40 44 44 48 48 B DIA MAX .590 (15.) .650 (16.5) .650 (16.5) .650 (16.5) .720 (18.3) .770 (19.6) .770 (19.6) .770 (19.6) .840 (21.3) .890 (22.6) .970 (24.6) .970 (24.6) 1.030 (26.2) 1.090 (27.7) 1.030 (26.2) 1.090 (27.7) 1.150 (29.2) 1.220 (29.2) 1.150 (29.2) 1.220 (31.0) 1.280 (32.5) 1.340 (34.0) 1.280 (32.5) 1.340 (34.0) 1.410 (35.8) 1.470 (37.3) 1.410 (35.8) 1.470 (37.3 1.530 (38.9) 1.590 (40.4) 1.530 (38.9) 1.590 (40.4) 1.660 (42.2) 1.660 (42.2) 1.660 (42.2) 1.840 (46.7) 1.970 (50.0) 2.090 (53.1) 2.280 (57.9) 2.340 (59.4) 2.340 (59.4) 2.530 (64.3) 2.590 (65.8) 2.590 (65.8) 2.780 (70.6) 2.910 (73.9) 3.030 (77.0) 3.160 (80.3) 3.220 (81.8) 3.410 (86.6) C DIA MAX .650 (16.5) .770 (19.6) .650 (16.5) .770 (19.6) .770 (19.6) .820 (20.8) .770 (19.6) .890 (22.6) .890 (22.6) .940 (23.9) .940 (23.9) 1.020 (29.2) 1.070 (26.2) 1.020 (25.9) 1.150 (29.2) 1.150 (29.2) 1.210 (30.7) 1.210 (30.7) 1.360 (34.5) 1.230 (31.2) 1.360 (34.5) 1.360 (34.5) 1.480 (37.6) 1.360 (34.5 1.480 (37.6) 1.530 (38.9) 1.600 (40.6) 1.480 (37.6) 1.600 (40.6) D DIA MAX .770 (19.6) .770 (19.6) .890 (22.6) .890 (22.6) 1.020 (25.9) 1.020 (25.9) 1.150 (29.2) 1.150 (29.2) 1.260 (32.0) 1.230 (31.2) 1.400 (35.6) E DIA MAX .690 (17.5) .940 (24.8) .690 (17.5) .820 (20.8) 1.060 (26.9) .820 (20.8) .940 1.170 .940 1.060 1.290 1.060 (23.8) (29.7) (23.8) (26.9) (32.7) (26.9) 1.170 (29.7) 1.420 (36.1) 1.170 (29.7) 1.290 (32.7) 1.540 (39.1) 1.360 (34.5) 1.530 (38.9) 1.420 (36.0) 1.670 (42.4) 1.480 (37.6) 1.600 (40.6) 1.600 (43.9) (43.9) 1.940 (43.2) (42.4) (49.3) (46.2) 1.940 1.970 (50.0) 2.190 (55.6) 2.190 2.220 (56.4) 2.440 (62.0) 2.440 2.440 2.47 (62.7) 2.690 2.690 2.720 (69.1) 2.930 2.970 (75.4) 1.730 1.730 1.700 1.670 1.940 1.820 1.540 (39.1) 2.010 (51.1) (40.6) (49.3) 1.660 (42.2) 2.120 (53.8) (49.3) 2.010 (51.1) (55.6) 2.260 (57.4) (62.0) (62.0) 2.530 (64.3) (68.3) (68.3) 3.040 (77.2) (74.4) 3.220 (81.8) * Code C, MIL-C-22992, Left-Hand Thread. Connector designations depicted thus [ ] are for reference only and are not to be used in part number development. BACKSHELL INTERFACE STANDARDS (See pages 15-17 for more information) DESIG. SPEC. SERIES DESIG. SPEC. SERIES A MIL-DTL-5015 MS3400 A PATT 602 MIL-DTL-26482 2 B MIL-DTL-5015 MS3100 AS81703 3 C MIL-C-22992 MS173XX MIL-DTL-83723 I & III D MIL-DTL-26482 1 40M39569 E MIL-DTL-26500 Aluminum DEF 5326-3 F MIL-DTL-38999 I & II EN 2997, 3646 40M38277 ESC 10, 11 PAN 6433-1 LN 29504 PATT 614 NFC93422 HE302 PATT 616 PAN 6432-1, -2 NFC93422 HE308, 9 DESIG. SPEC. SERIES G MIL-C-28840 H MIL-DTL-38999 III & IV EN3645 J MIL-C-81511 1, 2, 3 & 4 VG95329 K MIL-DTL-83723 II 13 DESIG. SPEC. L EN3372 JN 1003 LN 29729 NFC93422 PAN 6433-2 PATT 615 VG 96912 S PATT 105 PATT 603 PATT 608 SERIES HE306 How to Order TABLE I - BACKSHELL INTERFACE DIMENSIONS CONNECTOR DESIGNATOR How to Order Reference Information Standard Materials and Finishes GLENAIR SYMBOL TABLE II - STANDARD FINISHES M85049 SYMBOL REFERENCE ONLY FINISH SPECIFICATION(S) A Cadmium Plate, Bright AMS-QQ-P-416, Type I, Class 2 B Cadmium Plate, Olive Drab AMS-QQ-P-416, Type II, Class 3 C* Anodize, Black AMS-A-8625, Type II, Class 2 Hard Coat, Anodic AMS-A-8625, Type III, Class 1 A G* J Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3 AMS-QQ-P-416, Type II, Electroless Nickel Class 3 over AMS-C-26074, Class 4, Grade B LF Cadmium Plate, Bright Over Electroless Nickel 1000 Hour Corrosion Resistance Electroless Nickel AMS-C-26074, Class 4, Grade B Cadmium Plate, Olive Drab Over Electroless Nickel AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel AMS-C-26074 M N N Zinc Cobalt, Dark Olive Drab 96 Hour Corrosion Resistance Cadmium Plate, Olive Drab Over Electroless Nickel 1000 Hour Corrosion Resistance T Cadmium Plate, Bright Over Electroless Nickel AMS-QQ-P-416, Type I, Class 3 ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074*** U Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 ZU** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 Zinc-Nickel Alloy, Olive Drab ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt Spray NC NF W ZN * ** Anodize finish; not suitable for EMI Shielding or grounding applications. Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. The following standard materials are used for the majority of Glenair backshells and connector accessories. However, backshell components are not limited to those items listed, but are representative of the elements used in Glenair's general accessory products. Contact Glenair for applicable specifications on items not listed below. STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES COMPONENT Machined components: such as backshell bodies, fabricated elbows, protective covers, rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings, EMI ground rings, grommet followers, etc. Die cast components: such as angular backshells, strain relief backshells, strain relief bodies, strain relief saddles, special EMI ground rings, etc. Backshells or strain reliefs: available in optional corrosion resisting steel; and hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc. Anti-friction and thrust washers Anti-rotation device QQ-A-591 ASTMB85, 26 Corrosion Resisting Steel ASTMA582 (300 Series) AMS-QQ-S-763 Silicone A-A-59588 Fluorosilicone MIL-DTL-25988 Fluoropolymer TFE Corrosion Resistant N/A Material Aluminum On all length callouts, tolerance is .060 unless otherwise specified. Unless otherwise specified, the following other dimensional tolerances will apply: .xx = .03 (0.8) .xxx = .015 (0.4) Lengths = .060 (1.52) Angles = 5 Metric dimensions (mm) are indicated in parentheses NOTE: For your convenience these tables have been reproduced inside the back cover fold-out. (c) 2005 Glenair, Inc. SPECIFICATION AMS-QQ-A-200 ASTMB221, 209 NOTES BODY STRAP Glenair offers an optional stainless steel body strap for attaching protective covers as illustrated. To specify body strap, add suffix letter C to the end of the part number. For example 360AS001M1610M6C. 2-56 Screw and Nut MATERIAL Aluminum CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com 14 Glenair Backshell and Accessory Material and Finish Options Code A AB AL B C E G J JF LF M MT N NC NF P T TP2 U UC UCR UF XAL XB XM XMT XO XW XZN Z1 Z2 ZC ZCR ZL ZM ZMT ZN ZNU ZR ZU ZW Material Finish Aluminum Marine Bronze Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Aluminum Stainless Steel Aluminum Titanium Aluminum Aluminum Aluminum Aluminum Composite Composite Composite Composite Composite Composite Composite Stainless Steel Aluminum Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel Aluminum Aluminum Aluminum Stainless Steel Stainless Steel Cadmium, No Chromate Unplated AlumiPlate, Clear Chromate Cadmium, Olive Drab Anodize, Black Chem Film Anodize, Hardcoat Cadmium, Gold Cadmium, Gold Cadmium, Clear Electroless Nickel Nickel-PTFE Cadmium, Olive Drab Zinc-Cobalt, Olive Drab Cadmium, Olive Drab Electrodeposited Nickel Cadmium, No Chromate Electrodeposited Nickel Cadmium, Black Zinc-Cobalt, Black Zinc-Cobalt, Black Cadmium, Black AlumiPlate Unplated Black Electroless Nickel Nickel-PTFE Unplated Light Brown Cadmium, Olive Drab Zinc-Nickel, Black Passivate Gold Zinc-Cobalt, Black Zinc-Cobalt, Black Electrodeposited Nickel Electroless Nickel Nickel-PTFE Zinc-Nickel, Olive Drab Zinc-Nickel, Black Zinc-Nickel, Black Cadmium, Black Cadmium, Olive Drab Hrs. Salt Spray SAE-AMS-QQ-P-416 Type I Class 3 MIL-DTL-83488, Class 2, Type II over electroless nickel SAE-AMS-QQ-P-416 Type II Class 3 AMS-A-8625 Type II Class 2 MIL-DTL-5541 Type 1 Class 3 AMS-A-8625 Type III, Class 1, .001" thick SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV AMS2454 SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel ASTM B 840 Grade 6 Type D over electroless nickel SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel SAE-AMS-QQ-N-290 Class 1 Grade F SAE-AMS-QQ-P-416 Type I Class 3 SAE-AMS-QQ-N-290 Class 1 Grade F SAE-AMS-QQ-P-416 Type I Class 3 ASTM B 840 Grade 6 Type D over electroless nickel ASTM B 840 Grade 6 Type D over electroless nickel SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel MIL-DTL-86448, Class 2, Type II over electroless nickel AMS-C-26074 GMS-002 Class 2 Type II SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel ASTM B841 Grade 5 over electroless nickel SAE-AMS-SAE-AMS-QQ-P-35 Type VI MIL-DTL-45204 Class 1 over electroless nickel ASTM-B840, Grade 6 ASTM-B840, Grade 6 SAE-AMS-QQ-N-290 Class 1 Grade F AMS-C-26074 Class 1 Grade A GMF-002 Type II Class 3 ASTM B841 Grade 5 over electroless nickel ASTM B841 Grade 5 over electroless nickel ASTM B841 Grade 5 over electroless nickel SAE-AMS-QQ-P-416 Type II Class 3 SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel 48 1000 1000 96 336 168 336 500 1000 1000 48 1000 500 350 1000 500 48 96 48 350 350 1000 2000 2000 2000 2000 2000 2000 2000 1000 48 1000 1000 1000 1000 500 1000 2000 Electrical Conductivity Conductive Conductive Conductive Conductive Non-Conductive Conductive Non-Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Non-Conductive Conductive Conductive Non-Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Conductive Operating Temp. Range -65 to +175C -65 to +200C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +200C -65 to +175C -65 to +175C -65 to +175C -65 to +200C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +200C -65 to +175C -65 to +200C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +200C -65 to +200C -65 to +175C -65 to +175C -65 to +200C -65 to +200C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C -65 to +175C Notes Not recommended for new projects. LF is preferred. Marine and geophysical applications. Approved for MIL-DTL-38999L and MIL-DTL-83513G. Not recommended for new projects. NF is preferred. Not recommended for new projects. JF is preferred. Approved for MIL-DTL-38999L and MIL-DTL-83513G. Not recommended for new projects. NF is preferred. Use ZM for electroless nickel alternative. Not recommended for new projects. LF is preferred. Not recommended for new projects. UF is preferred. RoHS version of UC. Approved for MIL-DTL-38999L. Glenair's standard unplated composite. Glenair's standard passivated stainless steel. Glenair's standard gold plating for space programs. Glenair's standard zinc-cobalt over stainless steel. RoHS version of ZC. Used on hermetic connectors. Use ZM for other applications. Glenair's preferred nickel-plated stainless steel. Glenair's new 1000 Hour Grey over stainless steel. Approved for MIL-DTL-38999L. Not recommended for new projects. Use XB. Glenair's RoHs compliant black zinc-nickel. Glenair's standard black cadmium over stainless steel. Glenair's standard olive drab cadmium over stainless steel.