MC10216 High Speed Triple Line Receiver The MC10216 is a high speed triple differential amplifier designed for use in sensing differential signals over long lines. The base bias supply (VBB) is made available at pin 11 to make the device useful as a Schmitt trigger, or in other applications where a stable reference voltage is necessary. Active current sources provide the MC10216 with excellent common mode noise rejection. If any amplifier in a package is not used, one input of that amplifier must be connected to VBB (pin 11) to prevent upsetting the current source bias network. Complementary outputs are provided to allow driving twisted pair lines, to enable cascading of several amplifiers in a chain, or simply to provide complement outputs of the input logic function. * PD = 100 mW typ/pkg (No Load) * tpd = 1.8 ns typ (Single ended) * = 1.5 ns typ (Differential) * tr, tf = 1.5 ns typ (20%-80%) http://onsemi.com MARKING DIAGRAMS 16 CDIP-16 L SUFFIX CASE 620 MC10216L AWLYYWW 1 16 PDIP-16 P SUFFIX CASE 648 MC10216P AWLYYWW 1 1 LOGIC DIAGRAM VCC1 = PIN 1 VCC2 = PIN 16 VEE = PIN 8 4 2 5 3 9 6 10 7 12 14 13 15 11 VBB PLCC-20 FN SUFFIX CASE 775 A WL YY WW *VBB to be used to supply bias to the MC10216 only and bypassed (when used) with 0.01 F to 0.1 F capacitor. 10216 AWLYYWW = Assembly Location = Wafer Lot = Year = Work Week ORDERING INFORMATION When the input pin with bubble goes positive, it's respective output pin with bubble goes positive. Device DIP PIN ASSIGNMENT Package Shipping MC10216L CDIP-16 25 Units / Rail VCC1 1 16 VCC2 MC10216P PDIP-16 25 Units / Rail AOUT 2 15 COUT MC10216FN PLCC-20 46 Units / Rail AOUT 3 14 COUT AIN 4 13 CIN AIN 5 12 CIN BOUT 6 11 VBB BOUT 7 10 BIN VEE 8 9 BIN Pin assignment is for Dual-in-Line Package. For PLCC pin assignment, see the Pin Conversion Tables on page 18 of the ON Semiconductor MECL Data Book (DL122/D). Semiconductor Components Industries, LLC, 2002 January, 2002 - Rev. 7 1 Publication Order Number: MC10216/D MC10216 ELECTRICAL CHARACTERISTICS Test Limits Characteristic Symbol Pin Under Test Power Supply Drain Current IE 8 27 IinH 4 ICBO 4 9 Input Current -30C Min +25C Max Min +85C Typ Max Max Unit 20 25 Min 27 mAdc 180 115 115 Adc 1.5 1.5 1.0 1.0 1.0 1.0 Adc Output Voltage Logic 1 VOH 2 3 -1.060 -1.060 -0.890 -0.890 -0.960 -0.960 -0.810 -0.810 -0.890 -0.890 -0.700 -0.700 Vdc Output Voltage Logic 0 VOL 2 3 -1.890 -1.890 -1.675 -1.675 -1.850 -1.850 -1.650 -1.650 -1.825 -1.825 -1.615 -1.615 Vdc Threshold Voltage Logic 1 VOHA 2 3 -1.080 -1.080 Threshold Voltage Logic 0 VOLA 2 3 VBB 11 Reference Voltage -0.980 -0.980 -0.910 -0.910 -1.655 -1.655 -1.420 -1.280 -1.630 -1.630 -1.350 -1.230 -1.295 Vdc -1.595 -1.595 Vdc -1.150 Vdc Switching Times (50 Load) Propagation Delay ns t4+2+ t4-2- t4+3- t4-3+ 2 2 3 3 1.0 1.0 1.0 1.0 2.6 2.6 2.6 2.6 1.0 1.0 1.0 1.0 1.8* 1.8* 1.8* 1.8* 2.5 2.5 2.5 2.5 1.0 1.0 1.0 1.0 2.8 2.8 2.8 2.8 Rise Time (20 to 80%) t2+ t3+ 2 3 1.0 1.0 2.6 2.6 1.0 1.0 1.5 1.5 2.5 2.5 1.0 1.0 2.8 2.8 Fall Time (20 to 80%) t2- t3- 2 3 1.0 1.0 2.6 2.6 1.0 1.0 1.5 1.5 2.5 2.5 1.0 1.0 2.8 2.8 * Delay is 1.5ns when inputs are driven differentially. Delay is 1.8ns when inputs are driven single ended. http://onsemi.com 2 MC10216 ELECTRICAL CHARACTERISTICS (continued) TEST VOLTAGE VALUES (Volts) Characteristic Power Supply Drain Current Input Current @ Test Temperature VIHmax VILmin VIHAmin VILAmax -30C -0.890 -1.890 -1.205 -1.500 +25C -0.810 -1.850 -1.105 -1.475 +85C -0.700 -1.825 -1.035 -1.440 Symbol Pin Under Test VIHmax VBB From Pin 11 VEE -5.2 -5.2 -5.2 TEST VOLTAGE APPLIED TO PINS LISTED BELOW IE 8 4, 9, 12 IinH 4 4 ICBO 4 9 VILmin VIHAmin VILAmax VBB VEE (VCC) Gnd 5, 10, 13 8 1, 16 9, 12 5, 10, 13 8 1, 16 9, 12 4, 12 5, 10, 13 5, 10, 13 8, 4 8, 9 1, 16 Output Voltage Logic 1 VOH 2 3 4 9, 12 9, 12 4 5, 10, 13 5, 10, 13 8 8 1, 16 1, 16 Output Voltage Logic 0 VOL 2 3 9, 12 4 4 9, 12 5, 10, 13 5, 10, 13 8 8 1, 16 1, 16 Threshold Voltage Logic 1 VOHA 2 3 9, 12 5, 10, 13 5, 10, 13 8 8 1, 16 1, 16 2 3 9, 12 5, 10, 13 5, 10, 13 8 8 1, 16 1, 16 5, 10, 13 8 1, 16 Threshold Voltage Logic 0 Reference Voltage Switching Times VOLA VBB 9, 12 4 9, 12 4 4 11 Pulse In Pulse Out -3.2 V +2.0 V t4+2+ t4-2- t4+3- t4-3+ 2 2 3 3 4 4 4 4 2 2 3 3 5, 10, 13 5, 10, 13 5, 10, 13 5, 10, 13 8 8 8 8 1, 16 1, 16 1, 16 1, 16 (50 Load) Propagation Delay 4 Rise Time (20 to 80%) t2+ t3+ 2 3 4 4 2 3 5, 10, 13 5, 10, 13 8 8 1, 16 1, 16 Fall Time (20 to 80%) t2- t3- 2 3 4 4 2 3 5, 10, 13 5, 10, 13 8 8 1, 16 1, 16 Each MECL 10,000 series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is maintained. Outputs are terminated through a 50-ohm resistor to -2.0 volts. Test procedures are shown for only one gate. The other gates are tested in the same manner. http://onsemi.com 3 MC10216 PACKAGE DIMENSIONS PLCC-20 FN SUFFIX PLASTIC PLCC PACKAGE CASE 775-02 ISSUE C 0.007 (0.180) B Y BRK -N- M T L-M 0.007 (0.180) U M N S T L-M S G1 0.010 (0.250) S N S D -L- -M- Z W 20 D 1 X V S T L-M S N S VIEW D-D A 0.007 (0.180) M T L-M S N S R 0.007 (0.180) M T L-M S N S Z 0.007 (0.180) H M T L-M S N S K1 K C E F 0.004 (0.100) G J -T- VIEW S G1 0.010 (0.250) S T L-M S N S 0.007 (0.180) M T L-M S VIEW S SEATING PLANE NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635). http://onsemi.com 4 DIM A B C E F G H J K R U V W X Y Z G1 K1 INCHES MIN MAX 0.385 0.395 0.385 0.395 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --0.025 --0.350 0.356 0.350 0.356 0.042 0.048 0.042 0.048 0.042 0.056 --0.020 2 10 0.310 0.330 0.040 --- MILLIMETERS MIN MAX 9.78 10.03 9.78 10.03 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --0.64 --8.89 9.04 8.89 9.04 1.07 1.21 1.07 1.21 1.07 1.42 --0.50 2 10 7.88 8.38 1.02 --- N S MC10216 PACKAGE DIMENSIONS -A- 16 9 1 8 -B- CDIP-16 L SUFFIX CERAMIC DIP PACKAGE CASE 620-10 ISSUE T C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. L DIM A B C D E F G H K L M N -T- K N SEATING PLANE M E F J G D 16 PL 0.25 (0.010) 16 PL 0.25 (0.010) M T A T B M S PDIP-16 P SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R -A- 16 9 1 8 B F C L S -T- SEATING PLANE K H G D M J 16 PL 0.25 (0.010) M S T A M http://onsemi.com 5 INCHES MIN MAX 0.750 0.785 0.240 0.295 --0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0 15 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 --5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0 15 0.51 1.01 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0 10 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0 10 0.51 1.01 MC10216 Notes http://onsemi.com 6 MC10216 Notes http://onsemi.com 7 MC10216 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 MC10216/D