2N5457, 2N5458 Preferred Device JFETs - General Purpose N- Channel - Depletion N-Channel Junction Field Effect Transistors, depletion mode (Type A) designed for audio and switching applications. * * * * * * * http://onsemi.com N-Channel for Higher Gain Drain and Source Interchangeable High AC Input Impedance High DC Input Resistance Low Transfer and Input Capacitance Low Cross-Modulation and Intermodulation Distortion Unibloc Plastic Encapsulated Package 1 DRAIN 3 GATE 2 SOURCE TO-92 CASE 29 STYLE 5 MAXIMUM RATINGS Symbol Value Unit Drain -Source Voltage Rating VDS 25 Vdc Drain - Gate Voltage VDG 25 Vdc Reverse Gate - Source Voltage VGSR -25 Vdc IG 10 mAdc 310 2.82 mW mW/C Gate Current Total Device Dissipation 1 2 3 MARKING DIAGRAMS 2N 5457 YWW PD @ TA = 25C Derate above 25C Operating Junction Temperature TJ 135 C Storage Temperature Range Tstg - 65 to +150 C Y WW 2N 5458 YWW = Year = Work Week ORDERING INFORMATION Device Package Shipping 2N5457 TO-92 5000 Units/Box 2N5458 TO-92 5000 Units/Box Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2003 February, 2003 - Rev. 4 1 Publication Order Number: 2N5457/D 2N5457, 2N5458 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Typ Max Unit V(BR)GSS -25 - - Vdc IGSS - - - 1.0 -200 nAdc VGS(off) -0.5 -1.0 - -6.0 -7.0 Vdc VGS - -2.5 -3.5 - OFF CHARACTERISTICS Gate - Source Breakdown Voltage Gate Reverse Current (IG = -10 Adc, VDS = 0) (VGS = -15 Vdc, VDS = 0) (VGS = -15 Vdc, VDS = 0, TA = 100C) Gate-Source Cutoff Voltage (VDS = 15 Vdc, iD = 10 nAdc) 2N5457 2N5458 Gate-Source Voltage (VDS = 15 Vdc, iD = 100 Adc) (VDS = 15 Vdc, iD = 200 Adc) 2N5457 2N5458 Vdc ON CHARACTERISTICS Zero-Gate-V oltage Drain Current (Note 1) (VDS = 15 Vdc, VGS = 0) 2N5457 2N5458 IDSS 1.0 2.0 3.0 6.0 5.0 9.0 mAdc 2N5457 2N5458 |Yfs| 1000 1500 3000 4000 5000 5500 mhos Output Admittance Common Source (Note 1) (VDS = 15 Vdc, VGS = 0, f = 1 kHz) |Yos| - 10 50 mhos Input Capacitance (VDS = 15 Vdc, VGS = 0, f = 1 kHz) Ciss - 4.5 7.0 pF Reverse Transfer Capacitance (VDS = 15 Vdc, VGS = 0, f = 1 kHz) Crss - 1.5 3.0 pF DYNAMIC CHARACTERISTICS Forward Transfer Admittance (Note 1) (VDS = 15 Vdc, VGS = 0, f = 1 kHz) 1. Pulse Width 630 ms, Duty Cycle 10%. http://onsemi.com 2 2N5457, 2N5458 TYPICAL CHARACTERISTICS For 2N5457 Only 14 VDS = 15 V VGS = 0 f = 1 kHz NF, NOISE FIGURE (dB) 12 10 8 6 4 2 0 0.001 10 0.01 0.1 1.0 RS, SOURCE RESISTANCE (Megohms) Figure 1. Noise Figure versus Source Resistance 1.2 VGS(off) -1.2 V 1.2 VGS = 0 V 1.0 I D , DRAIN CURRENT (mA) I D , DRAIN CURRENT (mA) 1.0 -0.2 V 0.8 0.6 -0.4 V 0.4 -0.6 V 0 VDS = 15 V 0.6 0.4 0 -1.2 25 5 10 15 20 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 0.8 0.2 -0.8 V -1.0 V 0.2 0 VGS(off) -1.2 V Figure 2. Typical Drain Characteristics -0.8 -0.4 VGS, GATE-SOURCE VOLTAGE (VOLTS) 0 Figure 3. Common Source Transfer Characteristics http://onsemi.com 3 2N5457, 2N5458 TYPICAL CHARACTERISTICS For 2N5457 Only 5 5 VGS(off) -3.5 V 4 I D , DRAIN CURRENT (mA) I D , DRAIN CURRENT (mA) VGS = 0 V VGS(off) -3.5 V 3 -1 V 2 -2 V 1 4 3 VDS = 15 V 2 1 -3 V 0 0 5 10 15 20 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 0 -5 25 Figure 4. Typical Drain Characteristics 10 VGS(off) -5.8 V I D , DRAIN CURRENT (mA) I D , DRAIN CURRENT (mA) VGS = 0 V -1 V 6 -2 V 4 -3 V 2 0 Figure 5. Common Source Transfer Characteristics 10 8 -3 -2 -1 -4 VGS, GATE-SOURCE VOLTAGE (VOLTS) -4 V VGS(off) -5.8 V 8 6 VDS = 15 V 4 2 -5 V 0 0 5 10 15 20 VDS, DRAIN-SOURCE VOLTAGE (VOLTS) 0 -7 25 Figure 6. Typical Drain Characteristics NOTE: -6 -5 -4 -3 -2 -1 VGS, GATE - SOURCE VOLTAGE (VOLTS) Figure 7. Common Source Transfer Characteristics Note: Graphical data is presented for dc conditions. Tabular data is given for pulsed conditions (Pulse Width = 630 ms, Duty Cycle = 10%). Under dc conditions, self heating in higher IDSS units reduces IDSS. http://onsemi.com 4 0 2N5457, 2N5458 PACKAGE DIMENSIONS TO-92 (TO-226) CASE 29-11 ISSUE AL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L SEATING PLANE K DIM A B C D G H J K L N P R V D X X G J H V C SECTION X-X 1 N N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 --- 0.250 --- 0.080 0.105 --- 0.100 0.115 --- 0.135 --- TYLE 5: PIN 1. DRAIN 2. SOURCE 3. GATE http://onsemi.com 5 MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 --- 6.35 --- 2.04 2.66 --- 2.54 2.93 --- 3.43 --- 2N5457, 2N5458 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. American Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 6 2N5457/D