BAT400D
Document number: DS30182 Rev. 15 - 2 1 of 3
www.diodes.com June 2008
© Diodes Incorporated
BAT400D
0.5A SURFACE MOUNT SCHO TTKY BARRIER RECTIFIER
Features
• Low Forward Voltage Drop
• High Conductance
• Lead, Halogen and Antimony Free, RoHS Compliant
"Green" Device (Notes 3 and 4)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: SOT-23
• Case Material: Molded Plastic. UL Flammability Classification
Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
• Terminals: Solderable per MIL-STD-202, Method 208
• Lead Free Plating (Matte Tin Finish annealed over Alloy 42
leadframe).
• Polarity: See Diagram
• Marking Information: See Page 2
• Ordering Information: See Page 2
• Weight: 0.008 grams (approximate)
TOP VIEW
Top View Device Schematic
Maximum Ratings @TA = 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 40 V
RMS Reverse Voltage VR(RMS) 28 V
Average Rectified Current (Note 2) IO 0.5 A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load IFSM 3 A
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (see Figure 1) (Note 2) PD 480 mW
Typical Thermal Resistance, Junction to Ambient Air (Note 2) RθJA 286 °C/W
Operating and Storage Temperature Range TJ, TSTG -40 to +125 °C
Electrical Characteristics @TA = 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 1) V(BR)R 40 ⎯ ⎯ V IR = 1mA
Forward Voltage
VF ⎯ 285
480 300
550 mV IF = 10mA
IF = 500mA
Reverse Current (Note 1) IR ⎯
⎯ 1.0
2.0 30
50 μA
μA VR = 10V
VR = 30V
Total Capacitance CT ⎯
⎯ 125
20 ⎯
⎯ pF
pF VR = 0V, f = 1.0MHz
VR = 10V, f = 1.0MHz
Notes: 1. Short duration pulse test used to minimize self-heating effect.
2. Part mounted on FR-4 board with recommended pad layout, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf.
3. No purposefully added lead. Halogen and Antimony Free.
4. Product manufactured with Data Code V9 (week 33, 2008) and newer are built with Green Molding Compound. Product manufactured prior to Date
Code V9 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants.