SIMATIC Ruckwandhaube IP20 Produktinformation Gultigkeit Die Ruckwandhaube IP20 gewahrleistet die Schutzart IP20 fur SIMATIC Industrie-PCs und SIMATIC Bediengerate. Die Schutzart IP20 wird gewahrleistet, wenn die Ruckwandhaube IP20 an einem Gerat entsprechend vorliegendem Dokument angebaut ist. Das vorliegende Dokument gilt fur die Ruckwandhaube IP20, wenn diese kundenseitig angebaut wird. Hinweis Fur ein Gerat mit angebauter Ruckwandhaube gilt die Geratedokumentation und diese Produktinformation. Die Aussagen in dieser Produktinformation sind den Aussagen in der Geratedokumentation ubergeordnet. Ruckwandhauben IP20, die kundenseitig angebaut werden konnen Ruckwandhauben IP20 sind fur folgende SIMATIC- und SIMATIC HMI-Gerate verfugbar: 15"-Gerat Artikelnummer der zugehorigen Ruckwandhaube IP20 IPC277D 15", IPC277E 15" 6AV7675-1RB00-0AA0 IPC477D 15"; ohne DVD-/PCIe-Erweiterung 6AV7675-2RB00-0AA0 IFP1500 6AV7675-4RB00-0AA0 TP1500 Comfort 1 Mabild (Seite 9) 6AV7675-8RB00-0AA0 ITC1500 6AV7675-8RB00-0AA0 IPC477E 15" ST; ohne DVD-/PCIe-Erweiterung 6AV7675-2RB01-0AA0 15"-Multitouch-Gerat Artikelnummer der zugehorigen Ruckwandhaube IP20 IPC477D 15" MT; ohne DVD-/PCIe-Erweiterung 6AV7675-2RH00-0AA0 Mabild (Seite 9) IFP1500 MT 6AV7675-4RH00-0AA0 Mabild (Seite 10) 19"-Gerat Artikelnummer der zugehorigen Ruckwandhaube IP20 IPC277D 19" 6AV7675-1RD00-0AA0 IPC477D 19", IPC477D 19" MT; ohne DVD-/PCIe-Erweiterung 6AV7675-2RD00-0AA0 Mabild (Seite 10) Mabild (Seite 11) IPC 477E 19" ST; ohne DVD-/PCIe-Erweiterung IFP1900, IFP1900 MT 6AV7675-4RD00-0AA0 (schwarz) 6AV7675-4RD00-0AA1 (grau) TP1900 Comfort 1 6AV7675-8RD00-0AA0 ITC1900 6AV7675-8RD00-0AA0 22"-Gerat Artikelnummer der zugehorigen Ruckwandhaube IP20 IPC477D 22", IPC477D 22" MT; ohne DVD-/PCIe-Erweiterung 6AV7675-2RE00-0AA0 Mabild (Seite 11) IPC477E 22" ST; ohne DVD-/PCIe-Erweiterung 1 2 IFP2200, IFP2200 MT 2 6AV7675-4RE00-0AA0 TP2200 Comfort 1 6AV7675-8RE00-0AA0 ITC2200 6AV7675-8RE00-0AA0 Nur Comfort V1-Gerate, siehe Betriebsanleitung SIMATIC HMI Comfort Panels (A5E36770602) Nur Gerate mit Artikelnummern 6AV7863-4....-.... Die Geratedokumentation zu den in obigen Tabellen aufgefuhrten Geraten finden Sie unter: Dokumentation SIMATIC IPC (http://www.siemens.de/simatic-ipc-doku-portal) Dokumentation SIMATIC HMI Comfort Panels (http://support.automation.siemens.com/WW/view/de/47182890/133300) (c) Siemens AG 2019. Alle Rechte vorbehalten A5E34382870-AG, 03/2019 1 Aktuelle Informationen, welche Gerate auerdem mit der Ruckwandhaube IP20 ausgestattet werden konnen, finden Sie im Internet (http://support.automation.siemens.com/WW/view/de/92558323/133200). Gerate, die mit angebauter Ruckwandhaube IP20 bestellbar sind Die Ruckwandhaube IP20 ist am Gerat angebaut. Gilt fur: IPC277D 15" und IPC277D 19" IPC477D 15", IPC477D 19" und IPC477D 22" IPC477E 15" ST, IPC477E 19" ST und IPC477E 22" ST Hinweis Beachten Sie folgende Punkte: * Das vorliegende Dokument wird auch bei wiederholten Inbetriebnahmen benotigt. Bewahren Sie mitgelieferte und erganzende Dokumente wahrend der gesamten Lebensdauer des Gerats auf. * Stellen Sie sicher, dass Personen, die diese Dokumente benotigen, Zugriff darauf haben. * Geben Sie alle zugehorigen Dokumente an den nachfolgenden Eigentumer des Gerats weiter. Aufbau der Ruckwandhaube IP20 Ruck- und Seitenansicht Die folgenden Abbildungen zeigen beispielhaft die Ruckwandhaube IP20 fur ein 19"-Gerat. Wolbung, nur bei Ruckwandhauben fur 19"- und 22"-Gerate Die Wolbungen decken nach der Montage die im Gerat verbleibenden Schrauben ab. Abdeckung fur die Speicherkartensteckplatze bei Comfort Panel und Industrial Thin Client Verschlussschraube Schnittstellenabdeckung Sicherungsschraube Lieferumfang 1 x Ruckwandhaube IP20 Die Ruckwandhaube IP20 ist passend zu den Geraten in den verschiedenen Displaygroen ausgelegt und mit einer fur die Geratefamilie geeigneten Schnittstellenadaption versehen. 1 x Produktinformation "Ruckwandhaube IP20" 1 x Beipack Der Beipack enthalt Schrauben fur die Montage. Der Beipack enthalt ein Schild fur die Schnittstellenbeschriftung. Dieses Schild wird nur fur SIMATIC Industrial Thin Clients benotigt. 1 x Verpackung 2 Ruckwandhaube IP20 A5E34382870-AG, 03/2019 Zubehor Zubehor ist nicht im Lieferumfang enthalten und im Internet unter folgender Adresse verfugbar: Industry Mall (https://mall.industry.siemens.com) Standfu Fur die Ruckwandhauben ist ein Standfu erhaltlich. Artikelnummer: 6AV7675-8RX10-0AA0 Details: Standfu fur Ruckwandhaube (https://mall.industry.siemens.com/mall/de/de/Catalog/Product/6AV7675-8RX10-0AA0) Allgemeine Sicherheitshinweise Die folgenden Informationen gelten, wenn die Ruckwandhaube IP20 kundenseitig angebaut wird. Hinweis Beachten Sie folgende Punkte: * Anbau und Anschluss des Gerats mit Ruckwandhaube IP20 liegen in Verantwortung des Anlagenbauers. * Der Anbau der Ruckwandhaube IP20 an einem Gerat ist nur entsprechend Kapitel "Ruckwandhaube IP20 anbauen (Seite 4)" des vorliegenden Dokuments erlaubt. Beachten Sie auch die "Sicherheitshinweise" in den Dokumenten, die zum betreffenden Gerat gehoren. Gewahrleistung Der storungsfreie und sichere Betrieb des Gerats, an dem eine Ruckwandhaube IP20 angebaut wird, setzt Folgendes voraus: Sachgemaer Transport und Lagerung Sachgerechter Anbau und Anschluss Bei Nichteinhaltung dieser Bestimmungen erlischt die Gewahrleistung fur das Gerat. EGB Ein Elektrostatisch Gefahrdetes Bauteil ist mit elektronischen Bauelementen bestuckt. Elektronische Bauelemente sind technisch bedingt empfindlich gegen Uberspannungen und damit auch gegen Entladung statischer Elektrizitat. Beachten Sie die entsprechenden Vorschriften im Umgang mit EGB. Ruckwandhaube IP20 A5E34382870-AG, 03/2019 3 Zulassige Einbaulagen WARNUNG Personen- und Sachschaden bei unzulassiger Einbaulage moglich Wenn Sie das Gerat mit Ruckwandhaube in einer unzulassigen Lage einbauen, kann Personen- und Sachschaden die Folge sein. Unzulassige Einbaulagen fur ein Gerat mit Ruckwandhaube IP20 sind, z. B. der Einbau im Hochformat oder der Einbau mit seitlicher Neigung. Bauen Sie das Gerat mit Ruckwandhaube IP20 nur in einer zulassigen Einbaulage ein. Zulassige Einbaulagen * Geratefront im Querformat senkrecht eingebaut * Geratefront im Querformat geneigt eingebaut Die Geratefront darf maximal 35 nach vorn oder hinten geneigt sein. Ruckwandhaube IP20 anbauen Die folgenden Informationen gelten, wenn die Ruckwandhaube IP20 kundenseitig angebaut wird. Die im Kapitel "Technische Daten" der zugehorigen Betriebsanleitung garantierten Daten werden nur dann gewahrleistet: Wenn die Ruckwandhaube IP20 von Fachpersonal angebaut wird Wenn der Anbau entsprechend folgendem Arbeitsgang erfolgt Wenn das Gerat an eine Ruckwandhaube IP20 angebaut ist Voraussetzung Ruckwandhaube IP20 Gerat, an dem eine Ruckwandhaube IP20 angebaut werden soll: Alle Anschlussleitungen sind vom Gerat getrennt. Das Gerat ist spannungsfrei. Schrauben, siehe Kapitel "Lieferumfang (Seite 2)" Schraubendreher T10 Geeignete Montageunterlage zum Schutz der Geratefront vor Beschadigung Vorgehensweise Dieser Abschnitt beschreibt den Anbau der Ruckwandhaube IP20 anhand von Abbildungen der Bediengerate TP1500 Comfort und des TP2200 Comfort. Die Vorgehensweise gilt analog fur alle entsprechend Kapitel "Gultigkeit (Seite 1)" aufgefuhrten Gerate. Anbau 1. Legen Sie das Gerat auf seiner Vorderseite ab. 2. Ubertragen Sie die Artikelnummer vom Typschild des Gerats auf das Typschild der Ruckwandhaube IP20. Einige Zeichen sind auf dem Typschild der Ruckwandhaube IP20 bereits aufgedruckt, die fehlenden Zeichen sind zu erganzen. 3. Entfernen Sie abhangig von Ihrem Gerat die in folgenden Abbildungen mit einem Quadrat gekennzeichneten Schrauben. 4 Ruckwandhaube IP20 A5E34382870-AG, 03/2019 15"-Gerat 19"- oder 22"-Gerat: ACHTUNG Bei 19"- und 22"-Geraten nicht alle Schrauben entfernen Aus Grunden der Funktionssicherheit des Gerats ist es nicht gestattet, alle Schrauben zu entfernen. Entfernen Sie nicht die mit einem Kreis gekennzeichneten Schrauben. Diese werden durch jeweils eine Wolbung in der Ruckwandhaube IP20 uberdeckt. 4. Bewahren Sie die herausgedrehten Schrauben fur den Fall auf, dass das Gerat zu einem spateren Zeitpunkt ohne Ruckwandhaube verwendet werden soll. 5. Legen Sie die Ruckwandhaube IP20 auf die Ruckseite des Bediengerats. 6. Entnehmen Sie dem Beipack die erforderliche Anzahl Schrauben, um die Ruckwandhaube IP20 zu befestigen. Hinweis Verwenden Sie fur den Anbau nur die Schrauben des Beipacks. 7. Drehen Sie die Schrauben ein. Das zulassige Drehmoment betragt 0,8 Nm. 8. Gilt fur SIMATIC Industrial Thin Client: Kleben Sie das im Beipack enthaltene Schild fur die Schnittstellenbeschriftung des SIMATIC Industrial Thin Client auf die Ruckwandhaube IP20, so dass das vorhandene Schild fur die Schnittstellenbeschriftung vollstandig uberdeckt wird. Damit ist der Anbau der Ruckwandhaube IP20 beendet. Ruckwandhaube IP20 A5E34382870-AG, 03/2019 5 Abbau Gehen Sie beim Abbau in umgekehrter Reihenfolge zum Anbau vor. Verwenden Sie beim Anbau die entsprechend Arbeitsschritt 3 aufbewahrten Schrauben. Gerat anbauen Der Anbau des Gerats mit angebauter Ruckwandhaube IP20 an eine Maschine oder Anlage liegt in Verantwortung des Anlagenbauers. Hinweis Beachten Sie folgende Punkte: * Die Befestigungsstelle fur das Gerat mit der Ruckwandhaube IP20 muss fur das 4-fache Gerategewicht ausgelegt sein. Beachten Sie die Angaben der Klassifizierung VESA MIS-D 100 des VESA-Standards. * Die Luftungsschlitze an der Ruckwandhaube IP20 durfen nach der Montage nicht verdeckt sein. Abdeckung fur die Speicherkartensteckplatze offnen und schlieen Das Kapitel gilt fur die Varianten der Comfort Panels entsprechend Kapitel "Gultigkeit (Seite 1)". Im Folgenden ist das Offnen und Schlieen der Abdeckung fur die Speicherkartensteckplatze beschrieben. Die im Kapitel "Technische Daten" des Dokuments entsprechend Kapitel "Gultigkeit (Seite 1)" garantierten Daten werden nur dann gewahrleistet, wenn die Abdeckung geschlossen ist. Voraussetzung Ruckwandhaube IP20 ist angebaut Schraubendreher T10 Vorgehensweise Die folgende Vorgehensweise zeigt die Ruckwandhaube IP20 fur das Bediengerat TP2200 Comfort und gilt analog fur alle Ruckwandhauben IP20, die eine Abdeckung fur Speicherkartensteckplatze besitzen. Offnen 1. Drehen Sie die Schraube heraus. 2. Greifen Sie den Steg und bewegen Sie die Abdeckung vom Gerat weg. 3. Legen Sie die Abdeckung ab. Der Steckplatz fur das Speichermedium ist zuganglich. Voraussetzung und Vorgehensweise fur das Stecken und Ziehen des Speichermediums ist im Dokument des zugehorigen Gerats beschrieben. 6 Ruckwandhaube IP20 A5E34382870-AG, 03/2019 Schlieen Gehen Sie beim Schlieen in umgekehrter Reihenfolge zum Offnen vor. Schnittstellenabdeckung offnen und schlieen Dieser Abschnitt gilt fur Ruckwandhauben IP20 mit Schnittstellenabdeckung. Hinweis Die Ruckwandhauben IP20 fur Multitouch-Gerate haben keine Schnittstellenabdeckung. Im Folgenden ist das Offnen und Schlieen der Schnittstellenabdeckung an der Ruckwandhaube IP20 beschrieben. Die im Kapitel "Technische Daten" des Dokuments entsprechend Kapitel "Gultigkeit (Seite 1)" garantierten Daten werden nur dann gewahrleistet, wenn die Schnittstellenabdeckung geschlossen ist. Voraussetzung Ruckwandhaube IP20 ist angebaut Vorgehensweise Die folgende Vorgehensweise ist ein Beispiel anhand des TP2200 Comfort. Die Vorgehensweise gilt analog fur alle entsprechend Kapitel "Gultigkeit (Seite 1)" aufgefuhrten Gerate. Offnen 1. Drehen Sie die Schrauben und heraus. Die Schrauben lassen sich per Hand drehen und sind unverlierbar an der Schnittstellenabdeckung befestigt. 2. Heben Sie die Schnittstellenabdeckung an, hangen Sie diese an den Positionen und aus und heben Sie die Schnittstellenabdeckung ab. 3. Legen Sie die Schnittstellenabdeckung ab. Die Schnittstellen am Gerat liegen frei. Schlieen Gehen Sie beim Schlieen in umgekehrter Reihenfolge zum Offnen vor. Drehen Sie die Randelschrauben bis zum Anschlag ein. Ruckwandhaube IP20 A5E34382870-AG, 03/2019 7 Gerat anschlieen und trennen Im Folgenden ist das Anschlieen der Leitungen an den Schnittstellen beschrieben. Voraussetzung Ruckwandhaube IP20 ist angebaut Schnittstellenabdeckung abgenommen Kabelbinder Seitenschneider Vorgehensweise Die folgende Vorgehensweise ist ein Beispiel anhand des TP2200 Comfort. Die Vorgehensweise gilt analog fur alle entsprechend Kapitel "Gultigkeit (Seite 1)" aufgefuhrten Gerate. Anschlieen 1. Schlieen Sie die Leitungen an. Das Anschlieen der Leitungen ist im zugehorigen Dokument des betreffenden Gerats beschrieben. Hinweis Beim TP1500 Comfort entweder X2 PROFIBUS oder X3 PROFINET (LAN) verwendbar Wenn die Ruckwandhaube IP20 an ein TP1500 Comfort angebaut ist, dann ist aus Platzgrunden fur den Anschluss an die Schnittstelle X2 PROFIBUS ein gewinkelter Stecker zu verwenden, z. B.: 6ES7972-0BA30-0XA0, 6ES7972-0BA42-0XA0, 6ES7972-0BB42-0XA0, 6ES7972-0BA60-0XA0 oder 6ES7972-0BB60-0XA0. Wenn ein gewinkelter PROFIBUS-Stecker mit der Schnittstelle X2 PROFIBUS verbunden ist, dann verdeckt der gewinkelte Stecker die Schnittstelle X3 PROFINET (LAN). Sie konnen entweder die Schnittstelle X2 PROFIBUS mit einem gewinkelten PROFIBUS-Stecker oder die Schnittstelle X3 PROFINET (LAN) verwenden. 2. Sichern Sie die angeschlossenen Leitungen mit Kabelbindern an den Befestigungselementen der Ruckwandhaube IP20. Die folgende Abbildung zeigt ein Beispiel. 3. Schlieen Sie die Schnittstellenabdeckung entsprechend Kapitel "Schnittstellenabdeckung offnen und schlieen (Seite 7)". Trennen Gehen Sie beim Trennen in umgekehrter Reihenfolge zum Anschlieen vor. Schlieen Sie die Schnittstellenabdeckung. 8 Ruckwandhaube IP20 A5E34382870-AG, 03/2019 Mabild der Ruckwandhaube IP20 fur ein 15"-Gerat Die folgende Abbildung zeigt die Auenmae der Ruckwandhauben mit Artikelnummer 6AV7675-_RB00-0AA0. Das Zeichen "_" steht fur Varianten der Artikelnummer. Mabild der Ruckwandhaube IP20 fur einen IPC477D 15" MT Die folgende Abbildung zeigt die Auenmae der Ruckwandhaube mit Artikelnummer 6AV7675-2RH00-0AA0. Ruckwandhaube IP20 A5E34382870-AG, 03/2019 9 Mabild der Ruckwandhaube IP20 fur einen IPC477E 15" ST Die folgende Abbildung zeigt die Auenmae der Ruckwandhaube mit Artikelnummer 6AV7675-2RB01-0AA0. Mabild der Ruckwandhaube IP20 fur ein IFP1500 MT Die folgende Abbildung zeigt die Auenmae der Ruckwandhaube mit Artikelnummer 6AV7675-4RH00-0AA0. 10 Ruckwandhaube IP20 A5E34382870-AG, 03/2019 Mabild der Ruckwandhaube IP20 fur ein 19"-Gerat Die folgende Abbildung zeigt die Auenmae der Ruckwandhauben mit Artikelnummer 6AV7675-_RD00-0AA_. Das Zeichen "_" steht fur Varianten der Artikelnummer. Mabild der Ruckwandhaube IP20 fur ein 22"-Gerat Die folgende Abbildung zeigt die Auenmae der Ruckwandhauben mit Artikelnummer 6AV7675-_RE00-0AA_. Das Zeichen "_" steht fur Varianten der Artikelnummer. Ruckwandhaube IP20 A5E34382870-AG, 03/2019 11 Technische Daten Kenngroe Gultig fur Groenwert Gewicht ohne Verpackung Ruckwandhaube fur ein 15"-Gerat Ca. 1,6 kg Ruckwandhaube fur ein 19"-Gerat Ca. 1,9 kg Ruckwandhaube fur ein 22"-Gerat Ca. 2,2 kg Zulassige Einbaulage Alle Gerate mit Ruckwandhaube Nur Querformat, maximal 35 nach vorn oder hinten geneigt. Temperatur, wahrend Betrieb Ruckwandhauben fur alle Gerate auer IPC477E ST-Gerate, im angebauten Zustand 0 ... 40 C Ruckwandhauben fur IPC477E STGerate, im angebauten Zustand 0 ... 35 C Schutzart Ruckwandhauben fur alle Gerate, im angebauten Zustand IP20 Schwingen (Vibration), wahrend Betrieb, gepruft nach IEC 60068-2-6 Ruckwandhauben fur SIMATIC IPC277D, SIMATIC IPC477D, SIMATIC IPC477E ST mit SSD: 58 ... 200 Hz: 4,9 m/s2 mit HDD: keine mechanische Anregung Zertifikate und Zulassungen Fur das Gesamtgerat mit angebauter Ruckwandhaube IP20 gelten ausschlielich die auf der Ruckseite der Ruckwandhaube IP20 angegebenen Zulassungen. Alle Ruckwandhauben sind mit dem CE-Kennzeichen versehen. Hinweis Das CE-Kennzeichen auf der Ruckwandhaube IP20 ist gultig, wenn die Ruckwandhaube IP20 vorschriftsgema an das entsprechende Gerat angebaut ist. Fur eine Ruckwandhaube IP20, die nicht an ein Gerat angebaut ist, gilt das CE-Kennzeichen nicht. Gesamtgerate, deren Ruckwandhaube mit dem Kennzeichen "UL listed" versehen ist, besitzen eine Zulassung gema UL 60950-1, File-Nummer E115352. Fur das ursprungliche Gerat, an das in die Ruckwandhaube IP20 angebaut wurde, gilt: Die Angaben zu Zertifikaten und Zulassungen in der Betriebsanleitung des Gerats und auf der Gerateruckseite sind nicht gultig. EG-Konformitatserklarung Die EG-Konformitatserklarung wird fur die zustandigen Behorden zur Verfugung gehalten bei: Siemens AG Digital Factory Factory Automation DF FA SE R&D Breslauer Str. 5 DE-90766 Furth Germany 12 Ruckwandhaube IP20 A5E34382870-AG, 03/2019 Service und Support Weiterfuhrende Informationen und Unterstutzung zu den beschriebenen Produkten finden Sie im Internet unter folgenden Adressen: Technical Support (https://support.industry.siemens.com) Formular fur einen Support-Request (http://www.siemens.de/automation/support-request) After Sales Information System SIMATIC IPC/PG (http://www.siemens.de/asis) Gesamtdokumentation SIMATIC (http://www.siemens.de/simatic-tech-doku-portal) Ihr Ansprechpartner vor Ort (http://www.automation.siemens.com/mcms/aspa-db/de/Seiten/default.aspx) Trainingscenter (http://sitrain.automation.siemens.com/sitrainworld/?AppLang=de) Industry Mall (https://mall.industry.siemens.com) Wenn Sie sich mit Ihrem Ansprechpartner vor Ort oder mit dem Technical Support in Verbindung setzen, halten Sie bitte folgende Informationen bereit: Artikelnummer des Gerats BIOS-Version fur Industrie-PC bzw. Image-Version fur Bediengerat Zusatzlich installierte Hardware Zusatzlich installierte Software Siemens AG Division Digital Factory Postfach 48 48 90026 NURNBERG DEUTSCHLAND Ruckwandhaube IP20 A5E34382870-AG, 03/2019 A5E34382870-AG, 03/2019 13 SIMATIC Back cover IP20 Product Information Validity The backplane cover IP20 ensures degree of protection IP20 for SIMATIC Industrial PCs and SIMATIC HMI devices. The degree of protection IP20 is ensured when the backplane cover IP20 is installed on a device according to this document. This document is valid for the back cover IP20, when this is installed by the customer. Note The device documentation and this Product Information are valid for devices with a back cover installed. The statements in this Product Information take precedence over statements in the device documentation. Back covers IP20 which can be installed by customers Back covers IP20 are available for the following SIMATIC and HMI devices: 15" device Article number of the associated backplane cover IP20 IPC277D 15", IPC277E 15" 6AV7675-1RB00-0AA0 IPC477D 15"; without DVD/PCIe expansion 6AV7675-2RB00-0AA0 IFP1500 6AV7675-4RB00-0AA0 TP1500 Comfort 1 Dimension drawing (Page 22) 6AV7675-8RB00-0AA0 ITC1500 6AV7675-8RB00-0AA0 IPC477E 15" ST; without DVD/PCIe expansion 6AV7675-2RB01-0AA0 15" Multitouch device Article number of the associated backplane cover IP20 IPC477D 15" MT; without DVD/PCIe expansion 6AV7675-2RH00-0AA0 Dimension drawing (Page 22) IFP1500 MT 6AV7675-4RH00-0AA0 Dimension drawing (Page 23) Dimension drawing (Page 23) 19" device Article number of the associated backplane cover IP20 IPC277D 19" 6AV7675-1RD00-0AA0 IPC477D 19"IPC477D 19" MT; without DVD/PCIe expansion 6AV7675-2RD00-0AA0 Dimension drawing (Page 24) IPC 477E 19" ST; without DVD/PCIe expansion IFP1900, IFP1900 MT 6AV7675-4RD00-0AA0 (black) 6AV7675-4RD00-0AA1 (gray) TP1900 Comfort 1 6AV7675-8RD00-0AA0 ITC1900 6AV7675-8RD00-0AA0 22" device Article number of the associated backplane cover IP20 IPC477D 22"IPC477D 22" MT; without DVD/PCIe expansion 6AV7675-2RE00-0AA0 IPC477E 22" ST; without DVD/PCIe expansion IFP2200, IFP2200 MT 2 6AV7675-4RE00-0AA0 TP2200 Comfort 6AV7675-8RE00-0AA0 ITC2200 1 2 1 Dimension drawing (Page 24) 6AV7675-8RE00-0AA0 Comfort V1 devices only, see SIMATIC HMI Comfort Panels operating instructions (A5E36770602) Only devices with article numbers 6AV7863-4....-.... The device documentation for the devices listed in the tables above can be found at: SIMATIC IPC documentation (http://www.siemens.com/simatic-ipc-doku-portal) SIMATIC HMI Comfort Panels documentation (http://support.automation.siemens.com/WW/view/en/47182890/133300) 14 (c) Siemens AG 2019. All rights reserved A5E34382870-AG, 03/2019 Current information about which devices can also be equipped with the back cover IP20, is available on the Internet (http://support.automation.siemens.com/WW/view/en/92558323/133200). Devices that can be ordered with mounted back cover IP20 The back cover IP20 is mounted on the device. Applies to: IPC277D 15" and IPC277D 19" IPC477D 15", IPC477D 19" and IPC477D 22" IPC477E 15" ST, IPC477E 19" ST and IPC477E 22" ST Note Observe the following points: * You are also going to need this document whenever the system is recommissioned. Keep all supplied and supplementary documentation for the entire service life of the device. * Make sure that the persons who require these documents have access to them. * Submit all of these documents to a future owner of the device. Structure of the back cover IP20 Rear view and side view The figures below show the back cover IP20 for a 19" device as an example. Curvature only for back covers for 19" and 22" devices After mounting the curvatures cover the screws remaining in the device. Cover for the memory card slots for Comfort Panel and Industrial Thin Client Locking screw Interface cover Locking screw Scope of delivery 1 x back cover IP20 The back cover IP20 is designed to fit the devices in the various display sizes and is equipped with an interface adapter suitable for the device family. 1 x Product Information "Back cover IP20" 1 x accessory kit The accessory kit contains screws for mounting. The accessory kit contains a label for interface labeling. This label is required only for SIMATIC Industrial Thin Clients. 1 x packaging Back cover IP20 A5E34382870-AG, 03/2019 15 Accessories Accessories are not included in the scope of delivery but are available at the following address: Industry Mall (https://mall.industry.siemens.com) Stand A stand is available for the backplane cover. Article number: 6AV7675-8RX10-0AA0 Details: Stand for the backplane cover (https://mall.industry.siemens.com/mall/en/de/Catalog/Product/6AV7675-8RX10-0AA0) General safety instructions The information below applies when the back cover IP20 is mounted by the customer. Note Observe the following points: * Mounting and connection of the device with back cover IP20 is the responsibility of the plant constructor. * The mounting of the back cover IP20 on a device is only permitted according to section "Mounting back cover IP20 (Page 17)" of this document. Observe also the "Safety instructions" in the documents related to the respective device. Warranty Prerequisites for trouble-free and safe operation of the device on which back cover IP20 is to be mounted: Proper transportation and storage Proper mounting and wiring Non-compliance with these regulations shall render the device warranty void. ESD An ESD (Electrostatically Sensitive Device) is equipped with electronic components. Due to their design, electronic components are highly sensitive to overvoltage and electrostatic discharge. Observe the regulations governing the handling of ESD components. 16 Back cover IP20 A5E34382870-AG, 03/2019 Permitted mounting positions WARNING Personal injury and material damage possible as a result of impermissible mounting position If you install the device with back cover in an impermissible position, personal injury and material damage may occur. Impermissible mounting positions for a device with back cover IP20 are, for example, installation in portrait format or with a lateral incline. Install the device with back cover IP20 only in a permissible mounting position. Permitted mounting positions * Device front in landscape format installed vertically * Device front in landscape format installed at an angle The device front must not incline forward or backward more than 35. Mounting back cover IP20 The information below applies when the backplane cover IP20 is mounted by the customer. The data listed in the section "Technical Specifications" of the associated operating instructions are only guaranteed: If the backplane cover IP20 is mounted by qualified personnel If mounting takes place according to the following workflow If the device is mounted on a backplane cover IP20 Requirement Backplane cover IP20 Device on which a backplane cover IP20 is to be installed: All connection cables are removed from the device. The device is voltage-free. Screws, see section "Scope of delivery (Page 15)" T10 screwdriver Suitable installation pad to protect the device front against damage Procedure This section describes the mounting of the backplane cover IP20 based on figures of HMI devices TP1500 Comfort and TP2200 Comfort. The procedure applies accordingly to all corresponding devices listed in section "Validity (Page 14)". Installation 1. Place down the HMI device on its front side. 2. Transfer the article number from the nameplate of the device to the nameplate of the backplane cover IP20. Some characters are already printed on the nameplate of the backplane cover IP20, the missing characters are to be added. 3. Depending on your device, remove the screws marked with a square in the figures below. Back cover IP20 A5E34382870-AG, 03/2019 17 15" device 19" or 22" device: NOTICE For 19" and 22" devices do not remove all screws For reasons concerning the operational safety of the device, it is not permitted to remove all screws. Do not remove the screws marked with a circle. Each of these is covered by a curvature in the backplane cover IP20. 4. Store the removed screws aside in case you want to use the device later without backplane cover. 5. Place the backplane cover IP20 on the rear of the HMI device. 6. Remove from the accessory kit the required number of screws to fasten the back cover IP20. Note Use only the screws supplied in the accessory kit for mounting. 7. Tighten the screws. The permitted torque is 0.8 Nm. 8. Applies to SIMATIC Industrial Thin Client: Glue the label (contained in the accessory kit) for interface labeling of the SIMATIC Industrial Thin Client onto the backplane cover IP20 so that the existing label for interface labeling is completely covered. Mounting of the backplane cover IP20 is now complete. Removal For removal, follow the mounting steps in reverse order. For re-mounting, use the screws stored according to work step 3. 18 Back cover IP20 A5E34382870-AG, 03/2019 Mounting the device The mounting of the device with mounted back cover IP20 on a machine or plant is the responsibility of the plant constructor. Note Observe the following points: * The fastening point for the device with back cover IP20 must be designed for four times the weight of the device. Note the information about the VESA MIS-D 100 classification of the VESA standard. * The ventilation slots on the back cover IP20 must not be covered after mounting. Opening and closing of the cover for memory card slots The section applies to the versions of the Comfort Panels according to section "Validity (Page 14)". The following section describes the opening and closing of the cover for the memory card slots. The data listed in the section "Technical Specifications" of the associated section "Validity (Page 14)" are only guaranteed if the cover is closed. Requirement Back cover IP20 is mounted T10 screwdriver Procedure The following procedure shows the back cover IP20 for the HMI device TP2200 Comfort and also applies to all back covers IP20 that have a cover for memory card slots. Opening 1. Remove the screw . 2. Grab the rod and move the cover away from the device. 3. Put down the cover. The slot for the storage medium is accessible. Requirement and procedure for inserting and removing the storage medium are described in the document of the relevant device. Close For closing, follow the steps for opening in reverse order. Back cover IP20 A5E34382870-AG, 03/2019 19 Opening and closing the interface cover This section is valid for backplane covers IP20 with interface cover. Note The backplane covers IP20 for Multitouch devices do not have an interface cover. The following section describes the opening and closing of the interface cover on the back cover IP20. The data listed in the section "Technical Specifications" of the associated section "Validity (Page 14)" are only guaranteed if the interface cover is closed. Requirement Backplane cover IP20 is mounted Procedure The following procedure is an example using the TP2200 Comfort. The procedure applies accordingly to all corresponding devices listed in section "Validity (Page 14)". Opening 1. Remove the screws and . The screws can be turned by hand and are fastened captive to the interface cover. 2. Lift the interface cover, detach it at the positions and and remove it. 3. Put down the interface cover. The interfaces on the device are exposed. Close For closing, follow the steps for opening in reverse order. Tighten the knurled screws in as far as they will go. 20 Back cover IP20 A5E34382870-AG, 03/2019 Connecting and disconnecting the device The following section describes the connection of the cables to the interfaces. Requirement Back cover IP20 is mounted Interface cover has been removed Cable ties Wire cutter Procedure The following procedure is an example using the TP2200 Comfort. The procedure applies accordingly to all corresponding devices listed in section "Validity (Page 14)". Wiring 1. Connect the cables. The connection of the cables is described in the relevant document of the particular device. Note You can use either X2 PROFIBUS or X3 PROFINET (LAN) with the TP1500 Comfort If the back cover IP20 is mounted to a TP1500 Comfort, an angled connector must be used for connection to the X2 PROFIBUS interface, for example: 6ES7972-0BA30-0XA0, 6ES7972-0BA42-0XA0, 6ES7972-0BB42-0XA0, 6ES7972-0BA60-0XA0 or 6ES7972-0BB60-0XA0. If an angled PROFIBUS connector is connected with the X2 PROFIBUS interface, the angled connector covers up the X3 PROFINET (LAN) interface. You can either use the X2 PROFIBUS interface with an angled PROFIBUS connector or the X3 PROFINET (LAN) interface. 2. Secure the connected cables with cable ties to he fastening elements of the back cover IP20. The figure below shows an example. 3. Connect the interface cover according to section "Opening and closing the interface cover (Page 20)". Disconnecting For disconnecting, follow the steps for connecting in reverse order. Close the interface cover. Back cover IP20 A5E34382870-AG, 03/2019 21 Dimension drawing of back cover IP20 for a 15" device The figure below shows the outer dimensions of the backplane covers with article number 6AV7675-_RB00-0AA0. The character "_" stands for variants of the article number. Dimension drawing of back cover IP20 for an IPC477D 15" MT The figure below shows the outer dimensions of the backplane covers with article number 6AV7675-2RH00-0AA0. 22 Back cover IP20 A5E34382870-AG, 03/2019 Dimension drawing of back cover IP20 for an IPC477E 15" ST The figure below shows the outer dimensions of the backplane cover with article number 6AV7675-2RB01-0AA0. Dimension drawing of back cover IP20 for an IFP1500 MT The figure below shows the outer dimensions of the backplane covers with article number 6AV7675-4RH00-0AA0. Back cover IP20 A5E34382870-AG, 03/2019 23 Dimension drawing of back cover IP20 for a 19" device The figure below shows the outer dimensions of the backplane covers with article number 6AV7675-_RD00-0AA_. The character "_" stands for variants of the article number. Dimension drawing of back cover IP20 for a 22" device The figure below shows the outer dimensions of the backplane covers with article number 6AV7675-_RE00-0AA_. The character "_" stands for variants of the article number. 24 Back cover IP20 A5E34382870-AG, 03/2019 Technical specifications Parameter Valid for Value Weight without packaging Back cover for a 15" device Approx. 1.6 kg Back cover for a 19" device Approx. 1.9 kg Back cover for a 22" device Approx. 2.2 kg Permissible mounting position All devices with back cover Landscape format only, max. incline forward or backward 35. Temperature, during operation Back covers for all devices except IPC477E ST devices, in mounted state 0 to 40 C Back covers for IPC477E ST devices, in 0 ... 35 C mounted state Degree of protection Back covers for all devices, in mounted state IP20 Vibration, tested according to DIN IEC 60068-2-6 during operation Back covers for SIMATIC IPC277D, SIMATIC IPC477D, SIMATIC IPC477E ST With SSD: 58 ... 200 Hz: 4.9 m/s2 with HDD: No mechanical excitation Certificates and approvals The approvals specified on the rear of the back cover IP20 apply exclusively for the entire device with mounted back cover IP20. All back covers are carrying the CE marking. Note The CE marking on the back cover IP20 is valid when the back cover IP20 is properly mounted to the corresponding device. The CE marking is not valid for a back cover IP20 that is not mounted on a device. Entire devices whose back cover carries the "UL listed" marking are approved according to UL 60950-1, File E115352. For the original device on which the back cover IP20 was mounted: The information on certificates and approvals in the operating instructions of the device and on the rear of the device is not valid. EC Declaration of Conformity The EC Declarations of Conformity are made available to the responsible authorities at: Siemens AG Digital Factory Factory Automation DF FA SE R&D Breslauer Str. 5 DE-90766 Furth Germany Back cover IP20 A5E34382870-AG, 03/2019 25 Service and support You can find additional information and support for the products described on the Internet at the following addresses: Technical support (https://support.industry.siemens.com) Support request form (http://www.siemens.com/automation/support-request) After Sales Information System SIMATIC IPC/PG (http://www.siemens.com/asis) SIMATIC Documentation Collection (http://www.siemens.com/simatic-tech-doku-portal) Your local representative (http://www.automation.siemens.com/mcms/aspa-db/en/Pages/default.aspx) Training center (http://sitrain.automation.siemens.com/sitrainworld/?AppLang=en) Industry Mall (https://mall.industry.siemens.com) When contacting your local representative or Technical Support, please have the following information at hand: Article number of the device BIOS version for industrial PC or image version for HMI device Other installed hardware Other installed software Siemens AG Division Digital Factory Postfach 48 48 90026 NURNBERG GERMANY Back cover IP20 A5E34382870-AG, 03/2019 26 Back cover IP20 A5E34382870-AG, 03/2019