SX Series Crystal Clock Oscillator (XO) Legacy S1613XP Series 7.0 x 5.0mm SX 3.3V CMOS Low-Jitter High-Frequency XO Package: Recommended Land Pattern: 2 8 2 7.0 x 5.0mm Ceramic SMD 8 Product Features * 100 to 160 Frequency Range * <1 ps RMS jitter with advanced non-PLL, patented clock circuit Pin Functions: Pin Function * 50ppM accuracy standard for commercial or industrial operating conditions 1 OE Function 2 Ground * RoHS compliant 3 Clock Output 4 V DD Product Description This is an enhanced high-frequency 3.3V crystal clock oscillator with superb jitter and stability over a broad range of operating conditions and frequencies. The output clock signal, generated internally with a patented oscillator design, is compatible with LVCMOS/ LVTTL logic levels. Part Ordering Information: SX XXX YYYY Applications The SX Series is an ideal reference clock for high-speed applications requiring low jitter, including: Following the above format, Saronix-eCera part numbers will be assigned upon confirmation of exact customer requirements. * 1/10 Gigabit Ethernet Legacy Ordering Information - For Reference Only: * Fibre Channel * Serial Attached SCSI (SAS) SaRonix * Server & Storage platforms S 1613 B P - 156.2500 (T) Product Series * SONET/SDH linecards Frequency Stability AA = 20 ppm (-10 to +70 C) A = 25 ppm (-10 to +70 C) B = 50 ppm (-10 to +70 C) E = 50 ppm (-40 to +85C) * Passive Optical Network (PON) devices SaRonix-eCeraTM is a Pericom(R) Semiconductor company A: ProductFamily B: XXX = FrequencyCode C: YYYY = SpecificationCode * Packaging (T) = Tape & Reel full reel increments Blank = Bulk packaged Output Frequency (MHz) Series Version Code US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com SX 3.3V REV2009_JAN26_01.7 1 3.3V CMOS Low-Jitter High-Frequency XO SX SX Series Crystal Clock Oscillator (XO) Legacy S1613XP Series | 7.0 x 5.0mm Electrical Performance Parameter Min. Typ. Max. Units Notes 160 MHz As specified, higher frequencies avail. 3.3 3.63 V Supply Current, Output Enabled 30 mA 100 to 160 MHz Supply Current, Output Disabled 10 A Output Hi-Z 20 to 50 ppm Output Frequency 100 Supply Voltage 2.97 Frequency Stability Operating Temperature Range -20 +70 -40 +85 Output Logic 0, VOL Output Logic 1, VOH C 10% V DD V 15 pF 90% V DD Industrial (standard) V Output Load Duty Cycle See Note 1 below Commercial (standard) 45 Rise and Fall Time 55 % Measured 50% V DD 2 ns Measured 20/80% of waveform Jitter, Phase 0.25 1 ps RMS (1-) Jitter, Total 25 40 ps pk-pk -40 dBc Subharmonic Level 10kHz to 20 MHz frequency band 100.000 random periods Notes: 1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25C), aging (1 year at 25C average effective ambient temperature), shock and vibration. 2. For specifications othere than those listed, please contact sales. Output Enable / Disable Function Parameter Min. Input Voltage (pin 1), Output Enable Typ. Max. Units V or open 0.8 V Output is Hi-Z 2.2 Input Voltage (pin 1), Output Disable (low power standby) Internal Pullup Resistance 50 Notes k Output Disable Delay 100 ns Output Enable Delay 1 ms Absolute Maximum Ratings Parameter Storage Temperature Min. Typ. -55 SaRonix-eCeraTM is a Pericom(R) Semiconductor company * Max. Units +125 C US: +1-408-435-0800 TW: +886-3-4518888 Notes * All specifications are subject to change without notice. www.saronix-ecera.com SX 3.3V REV2009_JAN26_01.7 2 3.3V CMOS Low-Jitter High-Frequency XO SX SX Series Crystal Clock Oscillator (XO) Legacy S1613XP Series | 7.0 x 5.0mm Test Circuit Test Point Power Supply 4 0.1F or 0.01F 3 1 15 pF (Including probe and fixture capacitance) 2 Output Enable / Disable Function Reflow Soldering Profile As per IPC/JEDEC J-STD-020C Temperature - C 1 to 3C/sec max 260 Peak 260C for 10 sec max 1 to 3C/sec 217 60 to 90 sec Time 4 to 6 minutes max Reliability Test Ratings This product is rated to meet the following test conditions: Type Parameter Test Condition Mechanical Shock MIL-STD-883, Method 2002, Condition B Mechanical Solderability JESD22-B102-D Method 2 (Preconditioning E) Mechanical Terminal strength MIL-STD-883, Method 2004, Condition D Mechanical Gross leak MIL-STD-883, Method 1014, Condition C Mechanical Fine leak MIL-STD-883, Method 1014, Condition A2 (R1 = 2x10 -8 atm cc/s) Mechanical Solvent resistance MIL-STD-202, Method 215 Environmental Thermal shock MIL-STD-883, Method 1011, Condition A Environmental Moisture resistance MIL-STD-883, Method 1004 Environmental Vibration MIL-STD-883, Method 2007, Condition A Environmental Resistance to soldering heat J-STD-020C Table 5-2 Pb-free devices (2 cycles max) SaRonix-eCeraTM is a Pericom(R) Semiconductor company * US: +1-408-435-0800 TW: +886-3-4518888 * All specifications are subject to change without notice. www.saronix-ecera.com SX 3.3V REV2009_JAN26_01.7 3 3.3V CMOS Low-Jitter High-Frequency XO SX SX Series Crystal Clock Oscillator (XO) Legacy S1613XP Series | 7.0 x 5.0mm Typical Phase Noise -50 -60 -70 -80 -90 -100 -110 -120 -130 -140 -150 -160 100 1k SaRonix-eCeraTM is a Pericom(R) Semiconductor company 10k * 100k 1M 10M US: +1-408-435-0800 TW: +886-3-4518888 100M * All specifications are subject to change without notice. www.saronix-ecera.com SX 3.3V REV2009_JAN26_01.7 4