2
All specifications are subject to change without notice. SX 3.3V REV2009_JAN26_01.7
SaRonix-eCera™ is a Pericom® Semiconductor company • US: +1-408-435-0800 TW: +886-3-4518888 • www.saronix-ecera.com
3.3V CMOS Low-Jitter High-Frequency XO
3.3V CMOS Low-Jitter High-Frequency XO
SX Series Crystal Clock Oscillator (XO)
Legacy S1613XP Series | 7.0 x 5.0mm
SX
Output Enable / Disable Function
Parameter Min. Typ. Max. Units Notes
Input Voltage (pin 1), Output Enable 2.2 V or open
Input Voltage (pin 1), Output Disable (low power standby) 0.8 V Output is Hi-Z
Internal Pullup Resistance 50 kΩ
Output Disable Delay 100 ns
Output Enable Delay 1ms
Electrical Performance
Parameter Min. Typ. Max. Units Notes
Output Frequency 100 160 MHz As specifi ed, higher frequencies avail.
Supply Voltage 2.97 3.3 3.63 V
Supply Current, Output Enabled 30 mA 100 to 160 MHz
Supply Current, Output Disabled 10 μAOutput Hi-Z
Frequency Stability ±20 to ±50 ppm See Note 1 below
Operating Temperature Range -20 +70 °C Commercial (standard)
-40 +85 Industrial (standard)
Output Logic 0, VOL 10% VDD V
Output Logic 1, VOH 90% VDD V
Output Load 15 pF
Duty Cycle 45 55 % Measured 50% VDD
Rise and Fall Time 2 ns Measured 20/80% of waveform
Jitter, Phase 0.25 1 ps RMS (1-σ) 10kHz to 20 MHz frequency band
Jitter, Total 25 40 ps pk-pk 100.000 random periods
Subharmonic Level -40 dBc
Notes:
1. Stability includes all combinations of operating temperature, load changes, rated input (supply) voltage changes, initial calibration tolerance (25°C),
aging (1 year at 25°C average effective ambient temperature), shock and vibration.
2. For specifi cations othere than those listed, please contact sales.
Absolute Maximum Ratings
Parameter Min. Typ. Max. Units Notes
Storage Temperature -55 +125 °C