Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 1 of 8
Technical Specification
of
1. 27µm~1.61µm MQW-DFB Laser Diode
with Aspherical Lens Cap
for CWDM
SLT1430-xnnnx Series
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 2 of 8
1. General
SLT1430-xnnnx Series are 1.27µm~1.61µm InGaAsP/InP MQW-DFB laser diodes fabricated by
OMVPE entirely. These diodes have low threshold current and high performance at high temperature.
A laser diode is mounted into a coaxial package integrated with an lnGaAs monitor PD and an
aspherical lens cap.
2. Package dimension and pin assignment
(See attached appendix.)
3. Absolute maximum ratings
Parameter Symbol
Ratings Unit
Storage temperature Tstg -40~+100
°C
Operating case temperature Top 0~+70 °C
Peak optical output power Po 20 mW
Forward current (LD) IfL 150 mA
Reverse voltage (LD) VrL 2 V
Reverse voltage (PD) VrP 15 V
Reverse current (PD) IrP 2 mA
Soldering temperature (<10s) Stemp
260 °C
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 3 of 8
4. Electrical and optical characteristics (Po=5mW, Tc=+25°C, unless otherwise noted.)
Parameter Symbol
Condition Min. Typ.
Max.
Unit
CW — 10 15 Threshold current Ith
CW, Tc=0~+70°C 50
mA
CW, If=Ith+20mA 3.0 4.0 Optical output power Po
CW, If=Ith+20mA, Tc=0~+70°C 2.0
mW
Operating voltage Vf CW, Tc=0~+70°C 1.6 V
CW 0.15
0.2 — Slope efficiency Se
CW, Tc=0~+70°C 0.1
mW/mA
Peak wavelength λp CW (*1) nm
Wavelength Temperature
Coefficiency
— CW, Tc=0~+70°C 0.07
0.1 0.12
nm/°C
Side-mode suppression ratio
SSR
CW, Tc=0~+70°C 30 dB
Spectral width ∆λ CW, 20dB down, Tc=0~+70°C 1 nm
Rise time tr lb=lth, 20-80%, Tc=0~+70°C 0.10
ns
Fall time tf Ib=Ith, 80-20%, Tc=0~+70°C 0.15
ns
Monitor current Im CW, VrP=5V, Tc=0~+70°C 80 500 µA
VrP=5V — 10 Monitor dark current ld
VrP=5V, Tc=0~+70°C 100
nA
Monitor capacitance C VrP=5V, f=1MHz 10 pF
Note: *1. Detail of peak wavelength specification
Rank A Rank B
Channel No.
Min. Typ.
Max.
Unit Channel No.
Min. Typ.
Max.
Unit
-K605A 1268
1270
1272
-K605B 1267
1270
1273
-K240A 1288
1290
1292
-K240B 1287
1290
1293
-J885A 1308
1310
1312
-J885B 1307
1310
1313
-J540A 1328
1330
1332
-J540B 1327
1330
1333
-J205A 1348
1350
1352
-J205B 1347
1350
1353
-H885A 1368
1370
1372
-H885B 1367
1370
1373
-H570A 1388
1390
1392
-H570B 1387
1390
1393
-H260A 1408
1410
1412
-H260B 1407
1410
1413
-G965A 1428
1430
1432
-G965B 1427
1430
1433
-G675A 1448
1450
1452
-G675B 1447
1450
1453
-G390A 1468
1470
1472
-G390B 1467
1470
1473
-G120A 1488
1490
1492
-G120B 1487
1490
1493
-F850A 1508
1510
1512
-F850B 1507
1510
1513
-F590A 1528
1530
1532
-F590B 1527
1530
1533
-F340A 1548
1550
1552
-F340B 1547
1550
1553
-F095A 1568
1570
1572
-F095B 1567
1570
1573
-E855A 1588
1590
1592
-E855B 1587
1590
1593
-E620A 1608
1610
1612
nm
-E620B 1607
1610
1613
nm
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 4 of 8
5. Ordering information
Part number Pin assignment Number of pin Pin length
SLT1430-xnnnx Type A 4 13.5±0.5mm
SLT1436-xnnnx Type C 4 13.5±0.5mm
Channel (-xnnnx)
λp@25°C Range Status
-K605A ±2nm
-K605B
1270nm
±3nm
-K240A ±2nm
-K240B
1290nm
±3nm
-J885A ±2nm
-J885B
1310nm
±3nm
-J540A ±2nm
-J540B
1330nm
±3nm
-J205A ±2nm
-J205B
1350nm
±3nm
-H885A ±2nm
-H885B
1370nm
±3nm
-H570A ±2nm
-H570B
1390nm
±3nm
-H260A ±2nm
-H260B
1410nm
±3nm
-G965A ±2nm
-G965B
1430nm
±3nm
-G675A ±2nm
-G675B
1450nm
±3nm
Preliminary
-G390A ±2nm
-G390B
1470nm
±3nm
-G120A ±2nm
-G120B
1490nm
±3nm
-F850A ±2nm
-F850B
1510nm
±3nm
-F590A ±2nm
-F590B
1530nm
±3nm
-F340A ±2nm
-F340B
1550nm
±3nm
-F095A ±2nm
-F095B
1570nm
±3nm
-E855A ±2nm
-E855B
1590nm
±3nm
-E620A ±2nm
-E620B
1610nm
±3nm
In production
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 5 of 8
6. Precaution
(1) Radiation emitted by laser devices can be dangerous to the eyes. Avoid eye or skin exposure to
direct or scattered radiation.
(2) The modules should be handled in the same manner as ordinary semiconductor devices to
prevent the electro-static damages. For safe keeping and carrying, the modules should be
packaged with ESD proof material. To assemble the modules on PCB, the workbench, the
soldering iron and the human body should be grounded.
(3) Please pay special attention to the atmosphere condition because the dew on the module may
cause some electrical damages.
(4) Under such a strong vibration environment as in automobile, the performance and reliability are
not guaranteed.
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 6 of 8
7.
φ
5.6±0.1
φ
4.3
φ
3.75±0.1
+0.7
-0.1
Appendix
Part No.: SLT143 / □□□-□□□□□
-E620
-E855
-F095
-F340
-F590
-F850
-G120
-G390
-G675
-G965
-H260
-H570
-H885
-J205
-J540
-J885
-K240
-K605
Channel
1610nm
1590nm
1570nm
1550nm
1530nm
1510nm
1490nm
1470nm
1450nm
1430nm
1410nm
1390nm
1370nm
1350nm
1330nm
1310nm
1290nm
1270nm
Wavelength
@25deg.C
(Customize code)
B
A
Code
±3nm
±2nm
Wavelength
range
Pin Assignment
4
3
2
1
Pin No.
4
3
2
1
Pin No.
PD anode/PD cathode
PD anode
LD cathode
(CASE)
Pin function
for typeC
PD anode
PD cathode
LD cathode
LD anode (CASE)
Pin function
for typeA
1
2
4
P.C.D.
φ
2.0±0.15
Unit:mm
Focal Point
10±1
(1.25)
1.2±0.1
4.0±0.1
(5.2)
1
3.5±0.5
4-
φ
0.45±0.03
3
6
0
Code
Type C
Type A
Pin assignment
13.5±0.5
13.5±0.5
Pin length
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 7 of 8
For More Information
U.S.A.
ExceLight Communications Inc.
4021 Stirrup Creek Drive, Suite 200, Durham NC, 27703
U.S.A.
Tel. (919) 361-1600
Fax. (919) 361-1619
E-mail: info@excelight.com
URL: http://www.excelight.com
Europe
Sumitomo Electric Europe Ltd.
220 Centennial Park, Centennial Avenne, Elstree, Herts, WD6 3SL
United Kingdom
Tel. (020) 8953-8118
Fax. (020) 8207-5950
URL: http://www.sumielectric.com
Japan
Sumitomo Electric Industries, Ltd. (Opto-electronic Products Sales Dept.)
3-12, Moto-Akasaka 1-chome, Minato-ku Tokyo, 107-8468
Japan
Tel. (03) 3423-5031
Fax. (03) 3423-5247
E-mail: product_info@ppd.sei.co.jp
URL: http://www.sei.co.jp/Electro-optic/index_e.html
Sumitomo Electric Industries, Ltd.
Part No.: SLT1430-xnnnx Series
Document No.: HUW0024094-01E
Data of issue: August 26, 2003
Page 8 of 8
Revision Record
Document No. Date of issue
Description Incorporated by
Checked by
Approved by
HUW0024094-01A
Dec./20/00
Initial issue. T. Nakanishi
M. Yoshimura
M. Yoshimura
HUW0024094-01B
Feb./12/02
Removed SSR, tr, tf, and Im on
condition of Tc=+25°C;
Added Id on condition of
Tc=0~+70°C;
Corrected the distance from the
top facet of chip to the surface of
PKG.
T. Nakanishi
Y. Yamasaki
M. Yoshimura
HUW0024094-01C
May/21/02
Added Se on condition of
Tc=+25°C and Tc=0~+70°C;
Revised the tolerance of Focal
Point from ±2mm to ±1mm.
Y. Yamasaki
T. Nakanishi
M. Yoshimura
HUW0024094-01D
Aug./01/02
Added the spec of ∆λ;
Revised tr from max.: 0.25ns to
max.: 0.10ns;
Revised tf from max.: 0.30ns to
max.: 0.15ns.
Y. Yamasaki
N. Kushida M. Yoshimura
HUW0024094-01E
Aug./26/03
Added channels of 1270nm,
1290nm, 1310nm, 1330nm,
1350nm, 1370nm, 1390nm,
1410nm, 1430nm and 1450nm;
Revised wavelength temperature
coeff. from min.: 0.08nm/°C to
min.: 0.07 nm/°C.
T. Kounosu F. Furumai
Y. Yamasaki
M. Yoshimura