P4SMA220 ... P4SMA550CA P4SMA220 ... P4SMA550CA Surface mount unidirectional and bidirectional Transient Voltage Suppressor Diodes Unidirektionale und bidirektionale Spannungs-Begrenzer-Dioden fur die Oberflachenmontage Version 2010-03-31 2.2 0.2 2.1 0.1 5 0.2 4.6 1.5 2.7 0.1 Type Typ 400 W Nominal breakdown voltage Nominale Abbruch-Spannung 220...550 V Plastic case Kunststoffgehause 0.15 1 Peak pulse power dissipation Impuls-Verlustleistung 0.2 Dimensions - Mae [mm] ~ SMA ~ DO-214AC Weight approx. - Gewicht ca. 0.07 g Plastic material has UL classification 94V-0 Gehausematerial UL94V-0 klassifiziert Standard packaging taped and reeled Standard Lieferform gegurtet auf Rollen For bidirectional types (add suffix "C" or "CA"), electrical characteristics apply in both directions. Fur bidirektionale Dioden (erganze Suffix "C" oder "CA") gelten die elektrischen Werte in beiden Richtungen. Maximum ratings and Characteristics Grenz- und Kennwerte Peak pulse power dissipation (10/1000 s waveform) Impuls-Verlustleistung (Strom-Impuls 10/1000 s) TA = 25C PPPM Steady state power dissipation Verlustleistung im Dauerbetrieb TT = 75C PM(AV) Peak forward surge current, 60 Hz half sine-wave Stostrom fur eine 60 Hz Sinus-Halbwelle TA = 25C IFSM 40 A 2) Max. instantaneous forward voltage Augenblickswert der Durchlass-Spannung IF = 25 A VF < 3.5 V 2) Operating junction temperature - Sperrschichttemperatur Storage temperature - Lagerungstemperatur Tj TS -50...+150C -50...+150C Thermal resistance junction to ambient air Warmewiderstand Sperrschicht - umgebende Luft RthA < 70 K/W 3) Thermal resistance junction to terminal Warmewiderstand Sperrschicht - Anschluss RthT < 30 K/W 1 2 3 400 W 1) 1W Non-repetitive pulse see curve IPP = f (t) / PPP = f (t) Hochstzulassiger Spitzenwert eines einmaligen Impulses, siehe Kurve IPP = f (t) / PPP = f (t) Unidirectional diodes only - Nur fur unidirektionale Dioden Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 1 P4SMA220 ... P4SMA550CA Maximum ratings Type Typ Grenzwerte Breakdown voltage at IT = 1 mA Abbruch-Spannung bei IT = 1 mA Stand-off voltage Sperrspannung Max. rev. current Max. Sperrstrom at / bei VWM Max. clamping voltage Max. Begrenzer-Spannung at / bei IPPM (10/1000 s) VBR [V] VWM [V] ID [A] VC [V] IPPM [A] P4SMA220 220 10% 198...242 175 5 344 1.2 P4SMA220A 220 5% 209...231 185 5 328 1.2 P4SMA250 250 10% 225...275 202 5 360 1.1 P4SMA250A 250 5% 237...263 214 5 344 1.2 P4SMA300 300 10% 270...330 243 5 430 0.93 P4SMA300A 300 5% 285...315 256 5 414 0.97 P4SMA350 350 10% 315...385 284 5 504 0.79 P4SMA350A 350 5% 332...368 300 5 482 0.83 P4SMA400 400 10% 360...440 324 5 574 0.70 P4SMA400A 400 5% 380...420 342 5 548 0.73 P4SMA440 440 10% 396...484 356 5 631 0.63 P4SMA440A 440 5% 418...462 376 5 602 0.66 P4SMA480 480 10% 432...528 388 5 686 0.58 P4SMA480A 480 5% 456...504 408 5 658 0.61 P4SMA530 530 10% 477...583 429 5 764 0.52 P4SMA530A 530 5% 503...556 477 5 729 0.55 P4SMA550 550 10% 495...605 445 5 793 0.50 P4SMA550A 550 5% 522...577 495 5 760 0.53 TVS diodes having stand-off voltage VWM = 5.0 ... 170 V: please refer to datasheet P4SMAJ65 TVS-Dioden mit Sperrspannung VWM = 5.0 ... 170 V: siehe Datenblatt P4SMAJ65 2 http://www.diotec.com/ (c) Diotec Semiconductor AG P4SMA220 ... P4SMA550CA 120 [%] tr = 10 s 100 100 [%] 80 80 60 60 40 40 IPP IPP 20 20 PPP PPP 0 0 0 TA 100 50 150 [C] IPPM/2 PPPM/2 tP 0 1 t 1 2 3 [ms] 4 10/1000s - pulse waveform 10/1000s - Impulsform 1 Peak pulse power/current vs. ambient temperature ) Impuls-Spitzenleistung/Strom vs. Umgebungstemp.1) 2 10 [kW] 10 1 PPP 0.1 0.1s tP 1s 10s 100s 1ms 10ms Non repetitive peak pulse power versus pulse width (10/1000 wave form) Einzel-Impuls-Spitzenleistung in Abh. von der Pulsdauer (10/1000-Impuls) TVS diodes having stand-off voltage VWM = 5.0 ... 170 V: please refer to datasheet P4SMAJ65 TVS-Dioden mit Sperrspannung VWM = 5.0 ... 170 V: siehe Datenblatt P4SMAJ65 1 Mounted on P.C. board with 25 mm2 copper pads at each terminal Montage auf Leiterplatte mit 25 mm2 Kupferbelag (Lotpad) an jedem Anschluss (c) Diotec Semiconductor AG http://www.diotec.com/ 3