1
Relays and Optos
Australia & New Zealand Core Assortment Catalogue 2012
www.weidmuller.com.au
2
The new TERMSERIES is the NEXT generation of slimline relays from
Weidmuller and incorporates a number of new innovations from its already
highly proven MICROSERIES slimline relay family.
Not only have Weidmuller’s R&D team managed to design the product in a
lower profile space saving housing but they have also managed to increase
the structural strength of the product and most importantly also improve its
performance. If this doesn’t make the new TERMSERIES your number 1 choice
in slimline relays then we don’t know what will!
CONSTANT COMMITMENT
TO INNOVATION...
NEW TERMSERIES SLIMLINE HIGH PERFORMANCE
PLUG-IN RELAYS
Smaller
The new design reduces
the overall height of the
relay. This reduction also
increases the structural
strength of the relay.
Timesaving
The ability to cross connect
each input and output will
reduce wiring time.
Visible
With the LED integrated
into the Holddown Clip/
Ejecting lever, Light is
diffused thus indication is
brighter and visible in high
light levels.
www.weidmuller.com.au
3
Page 8
Page 61
Page 30
Page 69
Page 40
Page 48
Page 16
Page 72
Page 53
Contents
Termseries Relays
Termseries Optos
D Series Relays
Termopto and Microopto
Riderseries Relays
MC5O
MC5R
1 CO CONTACT
1 CHANNEL
DRM
TERMOPTO
DRH
BASE
1 CO & 2 CO
SOLENOID DRIVE 10A
NEO
2 CO CONTACT
2 CHANNEL
DRL
MICROOPTO
DRW
BASE
2 CO CONTACT
SOLENOID DRIVER 1A
CHANGE-OVER
ACCESSORIES
ACCESSORIES
DRR
ACCESSORIES
PWR
PCB PINS
ACCESSORIES
DUAL VOLTAGE
LOGIC
Relays
Optos
Page 4
Page 55
Page 22
Page 64
Page 34
Page 44
Page 10
Page 70
Page 50
Page 6
Page 57
Page 26
Page 67
Page 38
Page 46
Page 12
Page 71
Page 51
Slimline Interface Relays
Space Saving Power Relays
Specialty Terminal Relays
Industrial Multipole Relays
Slimline Interface Optocouplers
Specialty Terminal Optocouplers
Slimline Functional Optocouplers
4
Termseries
1 CO contact
TERMSERIES - Relay modules
TERMSERIES - Relay modules
AC-Input + RC-Filter
=~
=
==
~
AC/DC-Input
DC-Input
A2
TRS
A1
A2
A1
14 11 12
14 NO
COM
11
12 NC
Output
Type of contact / Number of contacts
Contact material
Max. switching voltage / current
Min. switching voltage / current
Min. mechanical lifetime
Min. electrical lifetime
Max. switch-on / switch-off delay
General data
Status indicator / Free-wheel (Input)
Reverse polarity protection (Input)
Ambient temperature (operational)
Storage temperature
Humidity
Reference temperature technical data
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse voltage
Overvoltage category
Pollution degree
Clearage and creepage distance input / output
Total circuit to rail
Dimensions
Clamping range mm²
Height x length x width mm
Note
1 CO
1 CO contact
Silver/Nickel (AgNi)
250 V / 6A (1)
5 V / 100 mA (2)
5x106 (1)
NO: 5x104; NC: 3x104 (1)
8 / 4 ms
LED green / yes
yes
-40 °C to 60 °C
-40 °C to 85 °C
5 %...95 %, Tu=40 °C, no condensation
20 °C
300 V
6 kV (1.2 / 50 µs)
III
2
>= 5.5 mm
4 k Veff / 1 min
0.14…1.5 mm²
90 x 88 x 6.4
1) At resistive load 2) 10 V / 10 mA; 24 V / 1 mA
3) Au- plate operate up to 0.25 W
Control side
Rated control voltage
Input current
Inuit power
Making threshold
Dropout threshold
Ordering data
Silver/Nickel (AgNi) AgNi 5uAu (Gold Plated)
Screw connection
Tension clamp connection
*Gold (Au)
24 V…230 V UC (AC/DC) +-10 %
23 mA @ 24 V DC / 4 mA @ 230 V AC (+/- 10 %)
530 mW @ 24 V DC / 930 mW @ 230 V AC
11 V / 20 mA
5 V / 6 mA
24 V - 230 V UC (AC/DC)
1122850000 1123090000
TRS 24-230VUC (AC/DC) 1CO TRS 24-230VUC (AC/DC) 1CO Au*
1122970000 1123210000
TRZ 24-230VUC (AC/DC) 1CO TRZ 24-230VUC (AC/DC) 1CO Au*
Note Spare relay type RSS…024
• Space-saving6.4mmwidth
• Silver/Nickel(AgNi)contactwithorwithoutgoldplating
• 5crossconnectionlevel
• Screwandtensionconnection
• Multivoltageinput:24…230VUC(AC/DC)inoneunit
5
TERMSERIES - Relay modules
Ordering data
Control side
Rated control voltage
Input current AC/DC
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Tension clamp connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Note
5 V DC +-20 %
- / 39 mA
200 mW
3.8 V DC @ 21 mA
1.6 V DC @ 8 mA
5 V DC
TRS 5VDC 1CO
1122740000
TRS 5VDC 1CO Au*
1122980000
TRZ 5VDC 1CO
1122860000
TRZ 5VDC 1CO Au*
1123100000
*Gold (Au)
Spare relay type RSS…005
12 V DC +-20 %
- / 18 mA
210 mW
8 V DC @ 9 mA
2 V DC @ 3 mA
12 V DC
TRS 12VDC 1CO
1122750000
TRS 12VDC 1CO Au*
1122990000
TRZ 12VDC 1CO
1122870000
TRZ 12VDC 1CO Au*
1123110000
*Gold (Au)
Spare relay type RSS…0012
24 V DC +- 20 %
- / 11 mA
240 mW
15 V DC @ 7 mA
5 V DC @ 2 mA
24 V DC
TRS 24VDC 1CO
1122770000
TRS 24VDC 1CO Au*
1123000000
TRZ 24VDC 1CO
1122880000
TRZ 24VDC 1CO Au*
1123120000
*Gold (Au)
Spare relay type RSS…024
24 V UC (AC/DC) +-10 %
11 mA / 6.4 mA
264 mVA / 154 mW
15.8 V @ 4 mA
7 V @ 1 mA
24 V UC (AC/DC)
TRS 24VUC* 1CO
1122780000
TRS 24VUC* 1CO Au*
1123010000
TRZ 24VUC* 1CO
1122890000
TRZ 24VUC* 1CO Au*
1123130000
*AC/DC (UC) / *Gold (Au)
Spare relay type RSS…024
48 V UC (AC/DC) +-10 %
5 mA / 4 mA
240 mVA / 192 mW
29 V @ 4 mA
10 V @ 1 mA
48 V UC (AC/DC)
TRS 48VUC* 1CO
1122790000
TRS 48VUC* 1CO Au*
1123020000
TRZ 48VUC* 1CO
112290000
TRZ 48VUC* 1CO Au*
1123140000
*AC/DC (UC) / *Gold (Au)
Spare relay type RSS…024
Ordering data
Control side
Rated control voltage
Input current AC/DC
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Tension clamp connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Note
60 V UC (AC/DC) +-10 %
6 mA / 3.3 mA
360 mVA / 198 mW
35 V AC / 40 V DC
13 V AC / 13 V DC
60 V UC (AC/DC)
TRS 60VUC* 1CO
1122800000
TRS 60VUC* 1CO Au*
1123030000
TRZ 60VUC* 1CO
1122910000
TRZ 60VUC* 1CO Au*
1123150000
*AC/DC (UC) / *Gold (Au)
Spare relay type RSS…060
120 V UC (AC/DC) +-10 %
4 mA / 3.5 mA
480 mVA / 420 mW
79 V @ 1.5 mA
65 V @ 0.5 mA
120 V UC (AC/DC)
TRS 120VUC* 1CO
1122810000
TRZ 120VUC* 1CO Au*
1123170000
TRZ 120VUC* 1CO
1122920000
TRS 120VUC* 1CO Au*
1123040000
*AC/DC (UC) / *Gold (Au)
Spare relay type RSS…060
230 V UC (AC/DC) +-10 %
3.5 mA / 2.9 mA
805 mVA / 670 mW
159 V @ 2.2 mA
99 V @ 1.2 mA
230 V UC (AC/DC)
TRS 230VUC* 1CO
1122820000
TRS 230VUC* 1CO Au*
1123050000
TRZ 230VUC* 1CO
1122930000
TRZ 230VUC* 1CO Au*
1123180000
*AC/DC (UC) / *Gold (Au)
Spare relay type RSS…060
120 V AC +- 10 %
7 mA / -
840 mVA
79 V @ 4 mA
65 V @ 2.5 mA
120 V AC RC
TRS 120VACRC 1CO
1122830000
TRS 120VACRC 1CO Au*
1123070000
TRZ 120VACRC 1CO
1122940000
TRZ 120VACRC 1CO Au*
1123190000
*Gold (Au)
Spare relay type RSS…060
230 V AC +-10 %
10 mA / -
2.3 VA
130 V / 9 mA
94 V / 4 mA
230 V AC RC
TRS 230VACRC 1CO
1122840000
TRS 230VACRC 1CO Au*
1123080000
TRZ 230VACRC 1CO
1122950000
TRZ 230VACRC 1CO Au*
1123200000
*Gold (Au)
Spare relay type RSS…060
TERMSERIES - Relay modules
6
Termseries
2 CO contact
• Space-saving12.8mmwidth
• Silver/Nickel(AgNi)contactwithorwithoutgoldplating
• 5crossconnectionlevel
• Screwandtensionconnection
• Multivoltageinput:24…230VUC(AC/DC)inoneunit
TERMSERIES - Relay modules
TERMSERIES - Relay modules
AC-Input + RC-Filter
=~
=
==
~
AC/DC-Input
DC-Input
A2
TRS
A1
A2A114 11 12
24 21 22
12
22
11
21
NC
NO
14
24
COM
Output
Type of contact / Number of contacts
Contact material
Max. switching voltage / current
Min. switching voltage / current
Min. mechanical lifetime
Min. mechanical lifetime
Max. switch-on / switch-off delay
General data
Status indicator / Free-wheel (Input)
Reverse polarity protection (Input)
Ambient temperature (operational)
Storage temperature
Humidity
Reference temperature technical data
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse voltage
Overvoltage category
Pollution degree
Clearage and creepage distance input / output
Total circuit to rail
Dimensions
Clamping range mm²
Height x length x width mm
Note
2 CO 2 CO Au (Gold)
2 CO contact 2 CO contact
AgNi AgNi 5uAu (3)
250 V / 8A; 15A @ 4s (1) 250 V / 8A; 15A @ 4s (1)
10 V / 100 mA (2) 1 V / 1 mA
30x106 (1) 30x106 (1)
NO: 5x104; NC: 3x104 (1) NO: 5x104; NC: 3x104 (1)
8 / 4 ms 8 / 4 ms
LED green / yes
yes
-40 °C to 60 °C
-40 °C to 85 °C
5 %...95 %, Tu=40 °C, no condensation
20 °C
300 V
6 kV (1.2 / 50 µs)
III
2
>= 5.5 mm
4kVeff / 1 min
0.14…1.5 mm²
90 x 88 x 12.8
1) At resistive load 2) 10 V / 10 mA; 24 V / 1 mA
3) Au- plate operate up to 0.25 W
Control side
Rated control voltage
Input current
Input power
Making threshold
Dropout threshold
Ordering data
Silver/Nickel (AgNi) AgNi 5uAu (Gold Plated)
Screw connection
Tension clamp connection
24 V…230 V UC (AC/DC) +-10 %
22 mA @ 24 V DC / 6 mA @ 230 V AC (+/- 10 %)
530 mW @ 24 V DC / 930 mW @ 230 V AC
11 V / 20 mA
5 V / 6 mA
24 V - 230 V UC (AC/DC)
1123580000 1123820000
TRS 24-230VUC (AC/DC) 2CO TRS 24-230VUC* 2CO Au*
1123700000 1123940000
TRZ 24-230VUC (AC/DC) 2CO TRZ 24-230VUC* 2CO Au*
*AC/DC (UC) / *Gold (Au)
Note Spare relay type RCL…024
7
TERMSERIES - Relay modules
Ordering data
Control side
Rated control voltage
Input current AC/DC
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Tension clamp connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Note
5 V DC +-20 %
- / 39 mA
200 mW
3.8 V DC @ 21 mA
1.6 V DC @ 8 mA
5 V DC
TRS 5VDC 2CO
1123470000
TRS 5VDC 2CO Au*
1123710000
TRZ 5VDC 2CO
1123590000
TRZ 5VDC 2CO Au*
1123830000
*Gold (Au)
Spare relay type RCL…005
12 V DC +-20 %
- / 34 mA
408 mW
8 V DC @ 21 mA
3 V DC @ 5 mA
12 V DC
TRS 12VDC 2CO
1123480000
TRS 12VDC 2CO Au*
1123720000
TRZ 12VDC 2CO
1123600000
TRZ 12VDC 2CO Au*
1123840000
*Gold (Au)
Spare relay type RCL…0012
24 V DC +- 20 %
- / 16 mA
384 mW
16.6 V DC @ 10 mA
3.5 V DC @ 3 mA
24 V DC
TRS 24VDC 2CO
1123490000
TRS 24VDC 2CO Au*
1123730000
TRZ 24VDC 2CO
1123610000
TRZ 24VDC 2CO Au*
1123850000
*Gold (Au)
Spare relay type RCL…024
24 V UC (AC/DC) +-10 %
16 mA / 14 mA
384 mVA / 336 mW
16 V @ 10 mA
8 V @ 3 mA
24 V UC (AC/DC)
TRS 24VUC* 2CO
1123500000
TRS 24VUC* 2CO Au*
1123740000
TRZ 24VUC* 2CO
1123620000
TRZ 24VUC* 2CO Au*
1123870000
*AC/DC (UC) / *Gold (Au)
Spare relay type RCL…024
48 V UC (AC/DC)+-10 %
9 mA / 7 mA
432 mVA / 336 mW
29 V @ 5 mA
12 V @ 2 mA
48 V UC (AC/DC)
TRS 48VUC* 2CO
1123510000
TRS 48VUC* 2CO Au*
1123750000
TRZ 48VUC* 2CO
1123630000
TRZ 48VUC* 2CO Au*
1123880000
*AC/DC (UC) / *Gold (Au)
Spare relay type RCL…048
Ordering data
Control side
Rated control voltage
Input current AC/DC
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
Silver/Nickel (AgNi)
AgNi 5uAu (Gold Plated)
Tension clamp connection
Silver/Nickel AgNi
AgNi 5uAu (Gold Plated)
Note
60 V UC (AC/DC) +-10 %
6 mA / 3.3 mA
360 mVA / 198 mW
35 V AC / 40 V DC
13 V AC / 13 V DC
60 V UC (AC/DC)
TRS 60VUC* 2CO
1123520000
TRS 60VUC* 2CO Au*
1123770000
TRZ 60VUC* 2CO
1123640000
TRZ 60VUC* 2CO Au*
1123890000
*AC/DC (UC) / *Gold (Au)
Spare relay type RCL…060
120 V UC (AC/DC) +-10 %
4 mA / 3.5 mA
480 mVA / 420 mW
79 V @ 1.5 mA
65 V @ 0.5 mA
120 V UC (AC/DC)
TRS 120VUC* 2CO
1123530000
TRS 120VUC* 2CO Au*
1123780000
TRZ 120VUC* 2CO
1123650000
TRZ 120VUC* 2CO Au*
1123900000
*AC/DC (UC) / *Gold (Au)
Spare relay type RCL…110
230 V UC (AC/DC) +-10 %
3.5 mA / 2.9 mA
805 mVA / 670 mW
159 V @ 2.2 mA
99 V @ 1.2 mA
230 V UC (AC/DC)
TRS 230VUC* 2CO
1123540000
TRS 230VUC* 2CO Au*
1123790000
TRZ 230VUC* 2CO
1123670000
TRZ 230VUC* 2CO Au*
1123910000
*AC/DC (UC) / *Gold (Au)
Spare relay type RCL…110
120 V AC +- 10 %
7 mA / -
840 mVA
79 V @ 4 mA
65 V @ 2.5 mA
120 V AC RC
TRS 120VACRC 2CO
1123550000
TRS 120VACRC 2CO Au*
1123800000
TRZ 120VACRC 2CO
1123680000
TRZ 120VACRC 2CO Au*
1123920000
*Gold (Au)
Spare relay type RCL…110
230 V AC +-10 %
10 mA / -
2.3 VA
130 V / 9 mA
94 V / 4 mA
230 V AC RC
TRS 230VACRC 2CO
1123570000
TRS 230VACRC 2CO Au*
1123810000
TRZ 230VACRC 2CO
1123690000
TRZ 230VACRC 2CO Au*
1123930000
*Gold (Au)
Spare relay type RCL…110
TERMSERIES - Relay modules
8
TERMSERIES - Accessories
TERMSERIES - Accessories
Technical data
Conductor Screw connection Tension clamp connection
1 conductor
Solid H07V-U mm² 0.14…2.5 0.14…1.5
Stranded H07V-K mm² 0.14…1.5 0.14…1.5
… with wire end ferrule mm² 0.25…1.5 0.14…1.5
… with wire end ferrule with plastic collar mm² 0.25…1.5 0.14…1.5
2 conductor with same size
Solid H07V-U mm² 0.5…1.0 0.5…1.0
Stranded H07V-K mm² 0.5…1.0 0.5…1.0
… with twin wire end ferrule H…D ZH mm² 0.5…1.5 0.5…1.0
Clamping range AWG…/1 AWG 26…14 26…16
Clamping range AWG…/7 AWG 26…16 26…16
Clamping range AWG…/19 AWG 26…16 26…16
Plug gauge to IEC 60947-1 Size A1 / B1 A1 / B1
General data
Nominal torque Nm 0.4
Stripping length mm 8 8
Continuous current ZQV 1.5N/R6.4 A 17.5; UL: 10 17.5; UL: 10
No. Contact durability relay / ZQV 10 10
Note
Dimensions
Tension clamp connection Screw connection
Pluggable cross connection
Type No. of poles / pitch Order No.
ZQV 1.5N/R6.4/2 GE 2 / 6.4 1193670000
ZQV 1.5N/R6.4/10 GE 10 / 6.4 1193680000
ZQV 1.5N/R6.4/19 GE 19 / 6.4 1193690000
ZQV 1.5N/R12.8/10 GE 10 / 12.8 1193700000
Supply terminal
Type Connection technology Order No.
TXS SUPPLY Screw connection 1240780000
TXZ SUPPLY Tension clamp connection 1240790000
Additional accessory
Type / Isolation plate Order No.
TW TXS/TXZ R3.2 Isolation plate 3.2 mm pitch 1240800000
Marker
WS 10/6 MC Middle 10x6 mm 1818400000
Screw driver
SDK PH0 Only Screw connection 9008470000
SD 0.6 x 3.5 x 100 9008330000
End bracket
WEW35/2 SW 1061210000
88 mm
90 mm
6.4 mm 12.8 mm
88 mm
90 mm
6.4 mm 12.8 mm
9
www.weidmuller.com.au
Weidmuller’s Industrial Relays provide users with excellent reliability and installation
convenience. Whether you require space saving, high power or frequency, our wide range
of relay modules provide the proper solution for all your industrial application needs.
POWER WITH
PRECISION
WEIDMÜLLER’S QUALITY RANGE IN
ELECTROMECHANICAL RELAYS
10
RIDERSERIES - Relay modules
RCI KIT with screw connection
1 CO
•Kit includes relay, base & hold down clip
•4.000VAswitchingcapacity
•Stableplug-inconnections
•LED(ACred/DCgreen)integratedinrelaymodule
•ProtectivesuppressorcircuitforDCcoil
•Optionaltestbuttonwithlatchingfunctionandinspection
window
•Identicationofcoils(ACred/DCblue)
DC-Version
A2
A1
A2
A1
AC-Version
12/22 14/24
11/21
12/22 14/24
11/21
Output
Switching voltage AC, max.
Continuous current
Contact material
Mechanical service life
Sparkover time / Drop-out time
Rated data
Status indicator / Free-wheel diode
Ambient temperature (operational)
Flammability class UL 94
Humidity
Approvals
Insulation coordination (EN 50 178)
Rated voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Protective separation acc. to VDE 0106 part 101
Dimensions
Clamping range (nominal / min. / max.) mm²
Length x width x height mm
Note
250 V
16 A
AgNi 90/10
AC coil 5x105 switching operations, DC coil 10x105
switching operations
7 ms / 3 ms
Green LED = DC coil; red LED = AC coil / Yes
-40 °C...+70 °C
V-0
40°C / 93% rel. humidity, no condensation
GL*; CE; cURus
250 V
> 8 mm
III
3
Yes
Screw connection
2.5 / 0.5 / 2.5
70 / 15.5 / 77
* Valid only for RCI kits with test button
Ordering data
Input
Rated control voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
Coil resistance
Ordering data
Relay module with socket
with test button Type
Order No.
without test button Type
Order No.
Note
24 V DC
16.7 mA
400 mW
16.8 V / 2.4 V
1440 Ω ±10%
24 V DC 1CO
RCIKIT 24VDC 1CO LD/PB
8881580000
RCIKIT 24VDC 1CO LED
8871000000
Ordering data
Type
Order No.
w. test button w.o. test button
RCI374AC4 RCI314AC4
8870250000 8870100000
24 V AC
31.6 mA
0.75 VA
18 V / 3.6 V
350 Ω ±10%
24 V AC 1CO
RCIKIT 24VAC 1CO LD/PB
8881590000
RCIKIT 24VAC 1CO LED
8871010000
RCI374R24 RCI314R24
8870280000 8870130000
w. test button w.o. test button
115 V AC
6.6 mA
0.75 VA
86.3 V / 17.3 V
8100 Ω ±15%
115 V AC 1CO
RCIKIT 115VAC 1CO LD/PB
8897060000
RCIKIT 115VAC 1CO LD
8897090000
RCI374S15 RCI314S15
8870290000 8870140000
w. test button w.o. test button
230 V AC
3.2 mA
0.75 VA
172.5 V / 34.5 V
32500 Ω ±15%
230 V AC 1CO
RCIKIT 230VAC 1CO LD/PB
8881600000
RCIKIT 230VAC 1CO LED
8871020000
RCI374T30 RCI314T30
8870300000 8870150000
w. test button w.o. test button
RIDERSERIES - Relay modules
11
RIDERSERIES - Relay modules
RCI KIT with screw connection
2 CO
•Kit includes relay, base & hold down clip
•4.000VAswitchingcapacity
•Stableplug-inconnections
•LED(ACred/DCgreen)integratedinrelaymodule
•ProtectivesuppressorcircuitforDCcoil
•Optionaltestbuttonwithlatchingfunctionandinspection
window
•Identicationofcoils(ACred/DCblue)
D
C
-Versio
n
A
C
-Versio
n
A2
A
1
12
21
22
14
11
24
A2
A
1
12
21
22
14
11
24
Output
Switching voltage AC, max.
Continuous current
Contact material
Mechanical service life
Sparkover time / Drop-out time
Rated data
Status indicator / Free-wheel diode
Ambient temperature (operational)
Flammability class UL 94
Humidity
Approvals
Insulation coordination (EN 50 178)
Rated voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Protective separation acc. to VDE 0106 part 101
Dimensions
Clamping range (nominal / min. / max.) mm²
Length x width x height mm
Note
250 V
8 A / 1 contact
AgNi 90/10
AC coil 5x105 switching operations, DC coil 10x105
switching operations
7 ms / 2 ms
Green LED = DC coil; red LED = AC coil / Yes
-40 °C...+70 °C
V-0
40°C / 93% rel. humidity, no condensation
GL*; CE; cURus
250 V
> 8 mm
III
3
Yes
Screw connection
2.5 / 0.5 / 2.5
70 / 15.5 / 77
* Valid only for RCI kits with test button
Ordering data
Input
Rated control voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
Coil resistance
Ordering data
Relay module with socket
with test button Type
Order No.
without test button Type
Order No.
Note
24 V DC
16.7 mA
400 mW
16.8 V / 2.4 V
1440 Ω ±10%
24 V DC 2CO
RCIKIT 24VDC 2CO LD/PB
8881610000
RCIKIT 24VDC 2CO LED
8871030000
Ordering data
Type
Order No.
w. test button w.o. test button
RCI484AC4 RCI424AC4
8870320000 8870180000
24 V AC
31.6 mA
0.75 VA
18 V / 3.6 V
350 Ω ±10%
24 V AC 2CO
RCIKIT 24VAC 2CO LD/PB
8881620000
RCIKIT 24VAC 2CO LED
8871040000
RCI484R24 RCI424R24
8870350000 8870210000
w. test button w.o. test button
115 V AC
6.6 mA
0.75 VA
86.3 V / 17.3 V
8100 Ω ±15%
115 V AC 2CO
RCIKIT 115VAC 2CO LD/PB
8897080000
RCIKIT 115VAC 2CO LD
8897100000
RCI484S15 RCI424S15
8870360000 8870220000
w. test button w.o. test button
230 V AC
3.2 mA
0.75 VA
172.5 V / 34.5 V
32500 Ω ±15%
230 V AC 2CO
RCIKIT 230VAC 2CO LD/PB
8881630000
RCIKIT 230VAC 2CO LED
8871050000
RCI484T30 RCI424T30
8870370000 8870230000
w. test button w.o. test button
RIDERSERIES - Relay modules
12
RIDERSERIES - Relay
RCI relay module
1 CO AC/DC coil
•4.000VAswitchingcapacity
•Stableplug-inconnections
•Optionaltestbuttonwithlatchingfunctionandinspection
window
•Optionalstatusindicator(ACred/DCgreen)
•Optionalprotectivesuppressorcircuit
•Identicationofcoils(ACred/DCblue)
Circuit diagram
View on solder pins
dimensions in mm
1 C/O changeover contacts
Output
Switching voltage AC, max.
Continuous current
Contact material
Mechanical service life
Sparkover time / Drop-out time
Rated data
Ambient temperature (operational)
Flammability class UL 94
Humidity
Approvals
Insulation coordination (EN 50 178)
Rated voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution severity
Protective separation acc. to VDE 0106 part 101
Dimensions
Length x width x height mm
Note
250 V
16 A
AgNi 90/10
AC coil 5x105 switching operations, DC coil 10x105
switching operations
7 ms / 3 ms
-40 °C...+70 °C
V-0
40°C / 93% rel. humidity, no condensation
cURus; VDE
250 V
> 8 mm
III
3
Yes
Plug-in connection
29 / 13.7 / x
x = 25.5 without test button / 26.7 with test button
Switching voltage [V DC]
Switching current [A]
DC load breaking capacity
Switching current [A]
Switching operations
Electrical endurance
Load current [A]
Derating curve
Ambient temperature [°C]
1 CO 16 A
0246810121416
250 V AC Resistive load
16 A
2 x 8 A
2 contacts
in series
1 contact
1-pole 16 A
Resistive load
...
16
12
10
14
8
6
4
Coil voltage [U/Un]
Operating voltage range DC
Ambient temperature [°C]
0 A
16 A
Un Rated coil voltage
Operating voltage range AC
Ambient temperature [°C]
Un Rated coil voltage
Coil voltage [U/Un]
0 A
16 A
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
version without LED
2 CO 2 x 8 A
Applications
RIDERSERIES - Relay modules
13
RIDERSERIES - Relay
Ordering data
Input
Rated control voltage
DC Response/dropout Voltage
Power rating
Rated current DC
Coil resistance
Ordering data
Relay module
Standard Type
Order No.
with test button Type
Order No.
with LED + freewheel diode Type
Order No.
+ freewheel diode Order No.
Note
12 V DC
8.4 V / 1.2 V
400 mW
33.3 mA
360 Ω ±10%
12 V DC 1CO
RCI314012
8869800000
RCI374012
8869950000
RCI314AB2
8870090000
RCI374AB2
8870240000
with test button + LED Type
24 V DC
16.8 V / 2.4 V
400 mW
16.7 mA
1440 Ω ±10%
24 V DC 1CO
RCI314024
8869810000
RCI374024
8869960000
RCI314AC4
8870100000
RCI374AC4
8870250000
48 V DC
33.6 V / 4.8 V
400 mW
8.7 mA
5520 Ω ±10%
48 V DC 1CO
RCI314048
8869820000
RCI374048
8869970000
RCI314AE8
8870110000
RCI374AE8
8870260000
110 V DC
77 V / 11 V
400 mW
4.1 mA
26600 Ω ±12%
110 V DC 1CO
RCI314110
8869830000
RCI374110
8869980000
RCI314BB0
8870120000
RCI374BB0
8870270000
Ordering data
Input
Rated control voltage
AC Response/dropout Voltage
Power rating
Rated current AC
Coil resistance
Ordering data
Relay module
Standard Type
Order No.
with test button Type
Order No.
with LED Type
Order No.
Order No.
Note
24 V AC
18 V / 3.6 V
0.75 VA
31.6 mA
350 Ω ±10%
24 V AC 1CO
RCI314524
8869840000
RCI374524
8869990000
RCI314R24
8870130000
RCI374R24
8870280000
with test button + LED Type
115 V AC
86.3 V / 17.3 V
0.75 VA
6.6 mA
8100 Ω ±15%
115 V AC 1CO
RCI314615
8869850000
RCI374615
8870000000
RCI314S15
8870140000
RCI374S15
8870290000
230 V AC
172.5 V / 34.5 V
0.75 VA
3.2 mA
32500 Ω ±15%
230 V AC 1CO
RCI314730
8869860000
RCI374730
8870010000
RCI314T30
8870150000
RCI374T30
8870300000
RCI relay module
1 CO AC/DC coil
Type code
Type of construction
Type
RCI
RIDER Control Industrial Coil
012 12 V DC
024 24 V DC
048 48 V DC
110 110 V DC
524 24 V AC
615 115 V AC
730 230 V AC
AB2 12 V DC+LED+diode
AC4 24 V DC+LED+diode
AE8 48 V DC+LED+diode
BB0 110 V DC+LED+diode
R24 24 V AC+LED
S15 115 V AC+LED
T30 230 V AC+LED
3 1-pole, 16 A
4 2-pole, 8 A
Type of contact
1 1 CO contact without test button
2 2 CO contacts without test button
7 1 CO contact with test button
8 2 CO contacts with test button
Contact material
4 AgNi 90/10
RIDERSERIES - Relay modules
14
RIDERSERIES - Relay
RCI relay module
2 CO AC/DC coil
•2.000VAswitchingcapacity
•Stableplug-inconnections
•Optionaltestbuttonwithlatchingfunctionandinspection
window
•Optionalstatusindicator(ACred/DCgreen)
•Optionalprotectivesuppressorcircuit
•Identicationofcoils(ACred/DCblue)
2 C/O changeover contacts
Circuit diagram
View on solder pins
dimensions in mm
Output
Switching voltage AC, max.
Continuous current
Contact material
Mechanical service life
Sparkover time / Drop-out time
Rated data
Ambient temperature (operational)
Flammability class UL 94
Humidity
Approvals
Insulation coordination (EN 50 178)
Rated voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Protective separation acc. to VDE 0106 part 101
Dimensions
Length x width x height mm
Note
250 V
8 A / 1 contact
AgNi 90/10
AC coil 5x105 switching operations, DC coil 10x105
switching operations
7 ms / 2 ms
-40 °C...+70 °C
V-0
40°C / 93% rel. humidity, no condensation
cURus; VDE
250 V
> 8 mm
III
3
Yes
Plug-in connection
29 / 13.7 / x
x = 25.5 without test button / 26.7 with test button
Coil voltage [U/Un]
Operating voltage range DC
Ambient temperature [°C]
Un Rated coil voltage
Operating voltage range AC
Ambient temperature [°C]
Un Rated coil voltage
Coil voltage [U/Un]
Switching voltage [V DC]
Switching current [A]
DC load breaking capacity
Switching current [A]
Switching operations
Electrical endurance
0246810121416
250 V AC Resistive load
16 A
2 x 8 A
2 contacts
in series
1 contact
2-pole 8 A
Resistive load
...
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Load current [A]
Derating curve
Ambient temperature [°C]
1 CO 16 A
16
12
10
14
8
6
4
2 CO 2 x 8 A
Applications
RIDERSERIES - Relay modules
15
RIDERSERIES - Relay modules
Ordering data
Input
Rated control voltage
DC Response/dropout Voltage
Power rating
Rated current DC
Coil resistance
Ordering data
Relay module
Standard Type
Order No.
with test button Type
Order No.
with LED + freewheel diode Type
Order No.
+ freewheel diode Order No.
Note
12 V DC
8.4 V / 1.2 V
400 mW
33.3 mA
360 Ω ±10%
12 V DC 2CO
RCI424012
8869870000
RCI484012
8870020000
RCI424AB2
8870170000
RCI484AB2
8870310000
with test button + LED Type
24 V DC
16.8 V / 2.4 V
400 mW
16.7 mA
1440 Ω ±10%
24 V DC 2CO
RCI424024
8869890000
RCI484024
8870030000
RCI424AC4
8870180000
RCI484AC4
8870320000
48 V DC
33.6 V / 4.8 V
400 mW
8.7 mA
5520 Ω ±10%
48 V DC 2CO
RCI424048
8869900000
RCI484048
8870040000
RCI424AE8
8870190000
RCI484AE8
8870330000
110 V DC
77 V / 11 V
400 mW
4.1 mA
26600 Ω ±12%
110 V DC 2CO
RCI424110
8869910000
RCI484110
8870050000
RCI424BB0
8870200000
RCI484BB0
8870340000
Ordering data
Input
Rated control voltage
AC Response/dropout Voltage
Power rating
Rated current AC
Coil resistance
Ordering data
Relay module
Standard Type
Order No.
with test button Type
Order No.
with LED Type
Order No.
Order No.
Note
24 V AC
18 V / 3.6 V
0.75 VA
31.6 mA
350 Ω ±10%
24 V AC 2CO
RCI424524
8869920000
RCI484524
8870060000
RCI424R24
8870210000
RCI484R24
8870350000
with test button + LED Type
115 V AC
86.3 V / 17.3 V
0.75 VA
6.6 mA
8100 Ω ±15%
115 V AC 2CO
RCI424615
8869930000
RCI484615
8870070000
RCI424S15
8870220000
RCI484S15
8870360000
230 V AC
172.5 V / 34.5 V
0.75 VA
3.2 mA
32500 Ω ±15%
230 V AC 2CO
RCI424730
8869940000
RCI484730
8870080000
RCI424T30
8870230000
RCI484T30
8870370000
RCI relay module
2 CO AC/DC coil
Type code
Type of construction
Type
RCI
RIDER Control Industrial Coil
012 12 V DC
024 24 V DC
048 48 V DC
110 110 V DC
524 24 V AC
615 115 V AC
730 230 V AC
AB2 12 V DC+LED+diode
AC4 24 V DC+LED+diode
AE8 48 V DC+LED+diode
BB0 110 V DC+LED+diode
R24 24 V AC+LED
S15 115 V AC+LED
T30 230 V AC+LED
3 1-pole, 16 A
4 2-pole, 8 A
Type of contact
1 1 CO contact without test button
2 2 CO contacts without test button
7 1 CO contact with test button
8 2 CO contacts with test button
Contact material
4 AgNi 90/10
RIDERSERIES - Relay modules
16
RIDERSERIES - Relay Accessories
Accessories for RCI relay
modules, 1 CO
Technical data
Rated current
Rated voltage
Dielectric strength of coil contacts
Ambient temperature (operational)
Protection class (IEC 61810)
Connection cross-section
- Solid-core wire
- Stranded wire
- with ferrule
Rated torque acc. to IEC 61984 for screw connection
Ordering data
Description
Plug-in module,
snaps onto TS35 DIN mounting rail, 2-pole
Accessories
Description
Plastic retaining clip
Metal retaining clip
Label
MultiCard 6x15 mm
Cross-connector for
PUSH IN base,
2-pole, 12 A
Cross-connector for
screw base,
8-pole
Dimensions in mm
2 x 12 A*
240 V AC
4000 Veff
-25 °C…+85 °C
IP20
2 x 1.5 mm2
2 x 1.5 mm2
2 x 1.0 mm2
* For 1-pole relay modules (16 A), the following terminals
must be connected: 11 with 21, 12 with 22, and 14 with 24.
Type Order No.
SRC-I 2CO P 8869500000
Type Order No.
SRC-I CLIP HP 8869510000
SRC-I CLIP HM RCI 1132090000
SRC-I MARK 8869530000
ESG 6/15 K MC NEUTR. WS 1880100000
SRC-I QV 8870840000
Dimensions
48 (Clip = 70)
15.5
98
SRC-I 2 CO P
Plug-in module with PUSH IN connection
Plug-in module with screw connection
2 x 12 A*
240 V AC
> 3000 Veff
-25 °C…+85 °C
IP20
2 x 2.5 mm2
2 x 2.5 mm2
2 x 1.5 mm2
0.5 Nm / max. 0.7 Nm
* For 1-pole relay modules (16 A), the following terminals
must be connected: 11 with 21, 12 with 22, and 14 with 24.
Type Order No.
SRC-I 2CO 8869490000
Type Order No.
SRC-I CLIP HP 8869510000
SRC-I CLIP HM RCI 1132090000
SRC-I MARK 8869530000
ESG 6/15 K MC NEUTR. WS 1880100000
SRC-I QV S 1132070000
Dimensions
61 (Clip = 70)
15.5
77
SRC-I 2 CO
RIDERSERIES - Relay Accessories
17
RIDERSERIES - Relay Accessories
Ordering data
Description
Free Wheel diode 1N4007
Resistor 100 kΩ 1 Watt
RC element 6 ... 60 V AC; 470 Ω / 220 nF
RC element 110 ... 230 V AC; 4,7 Ω / 10 nF
Varistor protection 24 V; S07K30
Varistor protection 110 V; S07K130
Varistor protection 230 V; S07K275
LED
LED 6 ... 24 V DC with free wheel diode
LED 24 ... 60 V DC with free wheel diode
LED 110 ... 230 V DC with free wheel diode
LED 6 ... 24 V DC / V AC
LED 24 ... 60 V DC / V AC
LED 110 ... 230 V DC / V AC
Type Order No. Order No.
RIM-I 1 6/230V 8869580000
RIM-I 1 R 110/230V
8870830000
RIM-I 3 6/60VAC 8869770000
RIM-I 3 110/230VAC
8869790000
RIM-I 4 24VUC* 8869710000
RIM-I 4 110VUC* 8869730000
RIM-I 4 230VUC* 8869750000
red green
RIM-I 2 6/24VDC 8869590000 8869600000
RIM-I 2 24/60VDC 8869670000 8869680000
RIM-I 2 110/230VDC
8869690000 8869700000
RIM-I 3 6/24VUC* 8869630000 8869640000
RIM-I 3 24/60VUC* 8869610000 8869620000
RIM-I 3 110/230VUC*
8869650000 8869660000
LED and protective modules for the SRC-I plug-in frame
Plug simply into the base module; reverse-connect protection. Connect parallel to coil.
Technical data
Nominal current 1-pole
Nominal current 2-pole
Nominal voltage
Ambient temperature (operational)
Approvals
Ordering data
Description
Plug-in base with PCB connections, pinning 3.5 mm
Plug-in base with PCB connections, pinning 5 mm
Accessory: metal retaining clip, 15.7 mm high
Accessory: metal retaining clip, 25.5 mm high
12 A
2 x 12 A
300 V AC
–40 °C ... +80 °C
Type Order No.
SRC 1CO PCB 8690860000
SRC 2CO PCB 8690850000
SRC CLIP LM 8693810000
SRC CLIP HM 8692620000
Plug-in base with PCB connections
for RCL relay modules SRC 1CO PCB
SRC 2CO PCB
Warnings and notes on usage
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 1
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 1 R
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 3 RC
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 3 LED
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 4
If more than two poles need to be connected with stacked cross-connector
ridges, then the lower ridge must be stripped and shortened to the proper
length so it will fit.
Cross-connector mounting for PUSH IN base
Ø 3.5
Release openings
Wire-connection opening A
A
Screwdriver
SD 0.6 x 3.5 x 100
9008330000
Handling the PUSH IN connection
Cross-connector mounting for screw base
RIDERSERIES - Relay Accessories
*UC (AC/DC)
18
RIDERSERIES - Relay Accessories
Accessories for
RCI relay modules,
2 CO
Technical data
Rated current
Rated voltage
Dielectric strength of coil contacts
Ambient temperature (operational)
Protection class (IEC 61810)
Stripping length
Connection cross-section
- Solid-core wire
- Stranded wire
- with ferrule
Rated torque acc. to IEC 61984
for screw connection
Ordering data
Description
Plug-in module,
snaps onto TS35 DIN mounting rail, 2-pole
Accessories
Description
Plastic retaining clip
Metal retaining clip
Label
MultiCard 6x15 mm
Cross-connector for
PUSH IN base,
2-pole, 12 A
Cross-connector for
screw base,
8-pole
Dimensions in mm
2 x 12 A
240 V AC
4000 Veff
-25 °C…+85 °C
IP20
12 mm
1 x 1.5 mm2 / 2 x 1.0 mm²
1 x 1.5 mm2 / 2 x 1.0 mm²
1 x 1.0 mm2 / 2 x 0.75 mm²
Type Order No.
SRC-I 2CO P 8869500000
Type Order No.
SRC-I CLIP HP 8869510000
SRC-I CLIP HM RCI
1132090000
SRC-I MARK 8869530000
ESG 6/15 K MC
NEUTR. WS
1880100000
SRC-I QV P 8870840000
Dimensions
48 (Clip = 70)
15.5
98
SRC-I 2 CO P
Plug-in module with
PUSH IN connection
Plug-in module with
screw connection
Standard height
2 x 12 A
240 V AC
> 3000 Veff
-25 °C…+85 °C
IP20
8 mm
2 x 2.5 mm2
2 x 2.5 mm2
2 x 1.5 mm2
0.5 Nm / max. 0.7 Nm
Type Order No.
SRC-I 2CO 8869490000
Type Order No.
SRC-I CLIP HP 8869510000
SRC-I CLIP HM RCI
1132090000
SRC-I MARK 8869530000
ESG 6/15 K MC
NEUTR. WS
1880100000
SRC-I QV S 1132070000
Dimensions
61 (Clip = 70)
15.5
77
SRC-I 2 CO
Plug-in module with
screw connection
Low height
2 x 12 A
240 V AC
> 3000 Veff
-25 °C…+85 °C
IP20
8 mm
2 x 2.5 mm2
2 x 2.5 mm2
2 x 1.5 mm2
0.5 Nm / max. 0.7 Nm
Type Order No.
SRC-I 2CO N 8869480000
Type Order No.
SRC-I CLIP HP 8869510000
SRC-I CLIP HM RCI
1132090000
SRC-I MARK 8869530000
ESG 6/15 K MC
NEUTR. WS
1880100000
SRC-I QV S 1132070000
Dimensions
42 (Clip = 70)
15.5
77
SRC-I 2 CO N
RIDERSERIES - Relay Accessories
19
RIDERSERIES - Relay Accessories
Ordering data
Description
Free Wheel diode 1N4007
Resistor 100 kΩ 1 Watt
RC element 6 ... 60 V AC; 470 Ω / 220 nF
RC element 110 ... 230 V AC; 4,7 Ω / 10 nF
Varistor protection 24 V; S07K30
Varistor protection 110 V; S07K130
Varistor protection 230 V; S07K275
LED
LED 6 ... 24 V DC with free wheel diode
LED 24 ... 60 V DC with free wheel diode
LED 110 ... 230 V DC with free wheel diode
LED 6 ... 24 V DC / V AC
LED 24 ... 60 V DC / V AC
LED 110 ... 230 V DC / V AC
Type Order No. Order No.
RIM-I 1 6/230V 8869580000
RIM-I 1 R 110/230V
8870830000
RIM-I 3 6/60VAC 8869770000
RIM-I 3 110/230VAC
8869790000
RIM-I 4 24VUC* 8869710000
RIM-I 4 110VUC* 8869730000
RIM-I 4 230VUC* 8869750000
red green
RIM-I 2 6/24VDC 8869590000 8869600000
RIM-I 2 24/60VDC 8869670000 8869680000
RIM-I 2 110/230VDC
8869690000 8869700000
RIM-I 3 6/24VUC* 8869630000 8869640000
RIM-I 3 24/60VUC* 8869610000 8869620000
RIM-I 3 110/230VUC*
8869650000 8869660000
LED and protective modules for the SRC-I plug-in frame
Plug simply into the base module; reverse-connect protection. Connect parallel to coil.
Technical data
Nominal current 1-pole
Nominal current 2-pole
Nominal voltage
Ambient temperature (operational)
Approvals
Ordering data
Description
Plug-in base with PCB connections, pinning 3.5 mm
Plug-in base with PCB connections, pinning 5 mm
Accessory: metal retaining clip, 15.7 mm high
Accessory: metal retaining clip, 25.5 mm high
12 A
2 x 12 A
300 V AC
–40 °C ... +80 °C
Type Order No.
SRC 1CO PCB 8690860000
SRC 2CO PCB 8690850000
SRC CLIP LM 8693810000
SRC CLIP HM 8692620000
Plug-in base with PCB connections
for RCL relay modules SRC 1CO PCB
SRC 2CO PCB
Warnings and notes on usage
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 1
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 1 R
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 3 RC
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 3 LED
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
+ A1
- A2
~
~
+ A1
- A2
~
~
RIM 4
If more than two poles need to be connected with stacked cross-connector
ridges, then the lower ridge must be stripped and shortened to the proper
length so it will fit.
Cross-connector mounting for PUSH IN base
Ø 3.5
Release openings
Wire-connection opening A
A
Screwdriver
SD 0.6 x 3.5 x 100
9008330000
Handling the PUSH IN connection
Cross-connector mounting for screw base
RIDERSERIES - Relay Accessories
*UC (AC/DC)
20
www.weidmuller.com.au
Weidmullers industrial relays provide users with excellent reliability and installation convenience. Whether you
require space saving, High power or frequency — Our wide range of relay modules provides the proper solution
for all your Industrial application needs.
SWITCHING POWER
WITH PRECISION
DRM ELECTROMECHANICAL RELAYS
Prevents bending of pins during
insertion and extraction
Hardened Extra Thick Pins
For increased switching range,
durability and reliability
For easily identified status
indication
270um Silver Alloy Contacts
LED & Mechanical Indication
Integrated Test Lever
Simplifies fault finding and
commissioning
• PLUG IN 2 Pole (DPDT) or 4 Pole (4PDT)
• Available with test button
• Free-wheel Diode for back EMF suppression
• Up to 10A rated carry current
• Large range of coil voltages
• Gold and silver contacts
21
www.weidmuller.com.au
Weidmullers addition of the DRL plug-in relay range, ensures users will be able to find a relay suitable for any application
within the Weidmuller range. With the comfort of proven quality, reliability & installation convenience.
PLUG-IN POWER
DRL ELECTROMECHANICAL RELAYS
• Plug in 2 Pole (DPDT) or 4 Pole (4PDT)
• Led Indication & Mechanical Flag
• Strong Industrial Pinning (In commonly found arrangements)
• 10A Contact Rating (DPDT & 4PDT)
• Large Range of coil voltages
• Plug –in Expansion Modules Available
LED & Mechanical Indication
10A Contact Rating
For easy identified status
indication.
10A Contact rating in both 2
pole and 4 pole relays.
Industrial Pinning
Robust industrial pins, in
commonly found layouts.
22
Application
DRM 270 Relay
2 change over contacts AC/DC coil
• Small size with high sensitivity
• Reasonable structure with wide usage
• Various types available
• Approvals with UL/CSA TUV
Circuit diagram
PIN top view
Dimensions are in mm
DRM270 electrical life Max. DC load break capacity Temperature derating curve
Operating cycles (x104)
Switching voltage (VDC)
Load current (A)
0 1 2 3 4 5 6 7 8 9 10
0
Operating current (A) Switching current (A) Ambient temperature (˚C)
DRM270 DRM270
250VAC resistive load
250VAC COSø=0.4 inductive load
DC24V(L/R=7ms) inductive load
10
10 0.1 0.2 0.5 1 2 5 10 20 5010
0
2
4
6
8
10
12
55 60 65 70 75 80 85 90
20
30
40
50
100
200
300
100
1000
Output
Load (resistive)
Switching power (resistive)
Contact resistance (initial)
Min. load voltage / current
Contact material
Electrical endurance / Mechanical endurance
Response / dropout delay at rated voltage
Initial voltage between homopolar contacts /
heteropolar contacts / contact and coil
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Insulation resistance
Coil power consumption
General
Ambient temperature
Storage temperature
Humidity
Atmospheric pressure
Shock resistance
Vibration resistance
Mounting
Weight
Min. in package
10 A / 250 Vac
2500 VA, 300W
≤ 50 mΩ
12 V / 10 mA or 5 V / 1 mA (gold plated contact)
Silver alloy or silver alloy with gold plating
> 25×104 (1800 Ops/h) / > 2×107 (18000 Ops/h)
≤ 20 ms / ≤ 20 ms
1000VAC/1min / 1000VAC/1min / 1800VAC/1min (leakage
current: 1mA)
DC: ≥ 75% of raged voltage, AC: ≥ 80% of raged voltage
DC: ≥ 10% of raged voltage, AC: ≥ 30% of raged voltage
110% of raged voltage
≥ 1000 MΩ
DC: ≤ 0.9 W, AC: 1.2 VA
DC: -40 °C...+60°C, AC: -40 °C...+55°C
-40 °C...+70°C
35%~85% RH
86-106KPa
10G (half wave of sine pulse: 11ms)
10~55Hz dual amplitude: 1.0mm 10~55Hz
Push-in connection or PCB welding
35 g
20 pcs
DRM270LD
Reverse polarity
DRM Auxiliary / Signal Relay
*For bases & other accessories please go to page 44
DRM Auxiliary / Signal Relay
23
Note
Relay
Ordering information
Ordering information
Ordering information
Ordering information
DRM
006 6Vdc / 012 12Vdc
024 24Vdc /048 48Vdc
110 110Vdc / 220 220Vdc
524 24Vac / 548 48Vac
615 115Vac / 730 230Vac
24 V AC 2CO
12 V DC 2CO
24 V AC
62.4mA/52.2mA
160Ω ±10%
19.2V / 7.2V
26.4V
1.0~1.2VA(60Hz)
12 V DC
75mA
160Ω ±10%
9V / 1.2V
13.2V
0.9W
DRM270012
7760056050
DRM270012L
7760056059
DRM270012LT
7760056068
DRM270524
7760056055
DRM270524L
7760056064
DRM270524LT
7760056073
48 V AC 2CO
24 V DC 2CO
48 V AC
33.3mA/27.8mA
600Ω ±10%
38.4V / 14.4V
52.8V
1.0~1.2VA(60Hz)
24 V DC
36.9mA
650Ω ±10%
18V / 2.4V
26.4V
0.9W
DRM270024
7760056051
DRM270024L
7760056060
DRM270024LT
7760056069
DRM270024LD
7760056077
DRM270548
7760056056
DRM270548L
7760056065
DRM270548LT
7760056074
115 V AC 2CO
48 V DC 2CO
115 V AC
12.6mA/10.8mA
3.750Ω ±10%
92V / 34.5V
126.5V
1.0~1.2VA(60Hz)
48 V DC
18.5mA
2,600Ω ±10%
36V / 4.8V
52.8V
0.9W
DRM270048
7760056052
DRM270048L
7760056061
DRM270048LT
7760056070
DRM270615
7760056057
DRM270615L
7760056066
DRM270615LT
7760056075
230 V AC 2CO
110 V DC 2CO
230 V AC
6.1mA/5.2mA
16.000Ω ±10%
184V / 69V
253V
1.0~1.2VA(60Hz)
110V DC
10mA
11,000Ω ±10%
82.5V / 11V
121.0V
0.9W
DRM270110
7760056053
DRM270110L
7760056062
DRM270110LT
7760056071
DRM270730
7760056058
DRM270730L
7760056067
DRM270730LT
7760056076
DRM270730L Au
7760056184
DRM270730LT Au
7760056186
220 V DC 2CO
220V DC
5.2mA
44,000Ω ±10%
165V / 22V
242V
0.9W
DRM270220
7760056054
DRM270220L
7760056063
DRM270220LT
7760056072
DRM270024L Au
7760056183
DRM270024LT Au
7760056185
Type code
Type DRM
Type of construction
2 change over contact
Coil voltage
LED L (Red for AC coil; green for DC coil)
Test lever T (Red for AC coil; green for DC coil)
Suppressor diode D
DRM 270 Relay
2 change over contacts AC/DC coil
Input
Rated voltage
Rated current (50Hz / 60Hz)
Coil resistance
Response / dropout voltage
Max. voltage
Power consumption
Input
Rated voltage
Rated current
Coil resistance
Response / dropout voltage
Max. voltage
Power consumption
Standard
With LED
With LED and test lever
With LED, gold plated
contact
With LED and test lever,
gold plated contact
Standard
With LED
With LED and test lever
With LED and suppressor
diode
With LED, gold plated
contact
With LED and test lever,
gold plated contact
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
DRM Auxiliary / Signal Relay
*For bases & other accessories please go to page 44
DRM Auxiliary / Signal Relay
24
Application
Circuit diagram
PIN top view
Dimensions are in mm
DRM 570 Relay
4 change over contacts AC/DC coil
• Small size with high sensitivity
• Reasonable structure with wide usage
• Various types available
• Approvals with UL/CSA TUV
DRM570 electrical life Max. DC load break capacity Temperature derating curve
Operating cycles (x104)
Switching voltage (VDC)
Load current (A)
Switching current (A)
DRM570
DRM570
250VAC resistive load
250VAC COSø=0.4 inductive load
DC24V(L/R=7ms) inductive load
0.1 0.2 0.5 1 2 5 10 20 0
2
4
6
8
10
12
0
10
100
1000
0 1 2 3 4 5 6 7 8 9 10
Operating current (A)
10
20
30
40
50
100
200
300
Ambient temperature (˚C)
5010 55 60 65 70 75 80 85 90
Output
Load (resistive)
Switching power (resistive)
Contact resistance (initial)
Min. load voltage / current
Contact material
Electrical endurance / Mechanical endurance
Response / dropout delay at rated voltage
Initial voltage between homopolar contacts /
heteropolar contacts / contact and coil
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Insulation resistance
Coil power consumption
General
Ambient temperature
Storage temperature
Humidity
Atmospheric pressure
Shock resistance
Vibration resistance
Mounting
Weight
Min. in package
10 A / 250 Vac
2500 VA, 300W
≤ 50 mΩ
12 V / 10 mA or 5 V / 1 mA (gold plated contact)
Silver alloy or silver alloy with gold plating
> 25×104 (1800 Ops/h) / > 2×107 (18000 Ops/h)
≤ 20 ms / ≤ 20 ms
2000VAC/1min / 1000VAC/1min / 2000VAC/1min (leakage
current: 1mA)
DC: ≥ 75% of raged voltage, AC: ≥ 80% of raged voltage
DC: ≥ 10% of raged voltage, AC: ≥ 30% of raged voltage
110% of raged voltage
≥ 1000 MΩ
DC: ≤ 0.9 W, AC: 1.2 VA
DC: -40 °C...+60°C, AC: -40 °C...+55°C
-40°C...+70°C
35%~85% RH
86-106KPa
10G (half wave of sine pulse: 11ms)
10~55Hz dual amplitude: 1.0mm 10~55Hz
Push-in connection or PCB welding
35 g
20 pcs
DRM570LD
Reverse polarity
DRM Auxiliary / Signal Relay
*For bases & other accessories please go to page 44
DRM Auxiliary / Signal Relay
25
DRM 570 Relay
4 change over contacts AC/DC coil
DRM
006 6Vdc / 012 12Vdc
024 24Vdc /048 48Vdc
110 110Vdc / 220 220Vdc
524 24Vac / 548 48Vac
615 115Vav / 730 230Vac
24 V AC 4CO
12 V DC 4CO
24 V AC
62.4mA/52.2mA
160Ω ±10%
19.2V / 7.2V
26.4V
1.0~1.2VA(60Hz)
12 V DC
75mA
160Ω ±10%
9V / 1.2V
13.2V
0.9W
DRM570012
7760056078
DRM570012L
7760056087
DRM570012LT
7760056096
DRM570524
7760056083
DRM570524L
7760056092
DRM570524LT
7760056101
48 V AC 4CO
24 V DC 4CO
48 V AC
33.3mA/27.8mA
615Ω ±10%
38.4V / 14.4V
52.8V
1.0~1.2VA(60Hz)
24 V DC
36.9mA
630Ω ±10%
18V / 2.4V
26.4V
0.9W
DRM570024
7760056079
DRM570024L
7760056088
DRM570024LT
7760056097
DRM570024LD
7760056105
DRM570548
7760056084
DRM570548L
7760056093
DRM570548LT
7760056102
115 V AC 4CO
48 V DC 4CO
115 V AC
12.6mA/10.8mA
4,340Ω ±10%
92V / 34.5V
126.5V
1.0~1.2VA(60Hz)
48 V DC
18.5mA
2,600Ω ±10%
36V / 4.8V
52.8V
0.9W
DRM570048
7760056080
DRM570048L
7760056089
DRM570048LT
7760056098
DRM570615
7760056085
DRM570615L
7760056094
DRM570615LT
7760056103
230 V AC 4CO
110 V DC 4CO
230 V AC
6.1mA/5.2mA
15,000Ω ±10%
184V / 69V
253V
1.0~1.2VA(60Hz)
110V DC
10mA
11,000Ω ±10%
82.5V / 11V
121.0V
0.9W
DRM570110
7760056081
DRM570110L
7760056090
DRM570110LT
7760056099
DRM570730
7760056086
DRM570730L
7760056095
DRM570730LT
7760056104
220 V DC 4CO
220V DC
5.2mA
42,000Ω ±10%
165V / 22V
242V
0.9W
DRM570220
7760056082
DRM570220L
7760056091
DRM570220LT
7760056100
DRM570730L Au
7760056188
DRM570730LT Au
7760056190
DRM570024L Au
7760056187
DRM570024LT Au
7760056189
Type code
Type DRM
Type of construction
4 change over contact
Coil voltage
LED L (Red for AC coil; green for DC coil)
Test lever T (Red for AC coil; green for DC coil)
Suppressor diode D
Ordering information
Ordering information
Input
Rated voltage
Rated current (50Hz / 60Hz)
Coil resistance
Response / dropout voltage
Max. voltage
Power consumption
Standard
With LED
With LED and test lever
With LED, gold plated
contact
With LED and test lever,
gold plated contact
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Note
Ordering information
Ordering information
Input
Rated voltage
Rated current
Coil resistance
Response / dropout voltage
Max. voltage
Power consumption
Standard
With LED
With LED and test lever
With LED and suppressor
diode
With LED, gold plated
contact
With LED and test lever,
gold plated contact
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
Type
Order No.
DRM Auxiliary / Signal Relay
*For bases & other accessories please go to page 44
DRM Auxiliary / Signal Relay
26
2CO
36max7
0 . 5
4 . 8
2 8 ma x 21 . 5 ma x
2 1 . 5m a x
36max
2 8 ma x
7
0 . 5
4 . 8
7 8
5 6
3 4
1 2
DC current [A]
Switching cycles [times]
AC coil operation range
DC coil operation range
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Min. in package
Dimensions
Length x Width x Height
250 V AC
16 A @ 1CO / 10A @ 2CO
AgCdO
12 V / 100 mA
< 50 mΩ
> 10 × 104 cycles (1,800 cycles / hour)
< 20 ms / < 20 ms
AC: ≤ 80% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 10% of rated voltage
110% of raged voltage
1.2 VA / 0.9 W
- 25 … 55˚C
- 25 … 55˚C
35 … 85 %
2,000V AC / 1 min
1,000V AC / 1 min
2,00V AC / 1 min
1.5 mm / 4 mm
250 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
35 g
20 pcs
28 x 21.5 x 43 mm
DRL Power Relay
2 change over contacts, AC/DC coil
Circuit diagram
PIN top view
Dimensions are in mm
Ambient temperature[˚C]
Ambient temperature[˚C]
Switching current [A]
Electrical life
DC voltage [V]
Max. DC load contact on-off curve
1CO Inductive load
24VDC(L/R=7ms)
1CO Inductive load
250VAC COSØ0.4
1CO Resistive load
1CO＼3CO＼4CO Resistive load
2CO＼3CO＼4CO Inductive load
2CO＼3CO＼4CO Inductive load
24VDC (L/R=7ms)
250VAC COSØ0.4
1x106
0.1 0.3 1 3 7 10 16
5x105
3x105
1x105
• Arc shield
• High dielectric strength: 2,000 V
• Approvals with UL/CSA TUV
DRL Power Relay
*For bases & other accessories please go to page 44
DRL Power Relay
27
DRL Power Relay
2 change over contacts, AC/DC coil
12 V DC 48 V DC 110 V DC 220 V DC
12 V DC
9 V / 1.2 V
0.9 W
75 mA
160Ω ±10%
24 V DC
24 V DC
18 V / 2.4 V
0.9 W
36.9 mA
650Ω ±10%
48 V DC 110 V DC 220 V DC
36 V / 4.8 V 82.5 V / 11 V 165 V / 22 V
0.9 W 0.9 W 0.9 W
18.5 mA 10 mA 5.2 mA
2,600Ω ±10% 11,000Ω ±10% 42,000Ω ±10%
1133510000 1133520000 1133530000 1133540000 1133550000
DRL270012L DRL270024L DRL270048L DRL270110L DRL270220L
24 V AC 230 V AC
24 V AC
19.2 V / 7.2 V
1.2 VA
54 mA
160Ω ±10%
115 V AC
115 V AC
92 V / 34.5 V
1.2 VA
12.9 mA
3,750Ω ±10%
230 V AC
184 V / 69 V
1.2 VA
6.8 mA
13,000Ω ±10%
DRL270524L DRL270615L DRL270730L
1133870000 1133880000 1133890000
DRL
Type code
Type code
Type DRL
Type of construction
170 1 change over contact
270 2 change over contacts
Coil voltage
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
615 115Vac / 730 230Vac
LED indicator
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current
Coil resistance
Type
Order No.
2 change over contact 2CO
Ordering information
Ordering information
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current (50 Hz)
Coil resistance
Type
Order No.
2 change over contact 2CO
DRL Power Relay
*For bases & other accessories please go to page 44
DRL Power Relay
28
4CO
13 14
1 2 3 4
5 6 7 8
9 10 11 12
4 1 . 5m a x
2 8 ma x
0 . 5
4 . 8
36max7
DRL Power Relay
4 change over contacts, AC/DC coil
Circuit diagram
PIN top view
Dimensions are in mm
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Min. in package
Dimensions
Length x Width x Height
250 V AC
10A
AgCdO
12 V / 100 mA
< 50 mΩ
> 10 × 104 cycles (1,800 cycles / hour)
< 20 ms / < 20 ms
AC: ≤ 80% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 10% of rated voltage
110% of raged voltage
3CO:2 VA / 1.4 W; 4CO:2.5 VA / 1.5 W
- 25 … 55˚C
- 25 … 55˚C
35 … 85 %
2,000V AC / 1 min
1,000V AC / 1 min
2,000V AC / 1 min
1.5 mm / 4 mm
250 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
3CO: 50g; 4CO: 65g
10
28 x 21.5 x 43 mm
DC current [A]
Switching cycles [times]
AC coil operation range
DC coil operation range
Ambient temperature[˚C]
Ambient temperature[˚C]
Switching current [A]
Electrical life
DC voltage [V]
Max. DC load contact on-off curve
1CO Inductive load
24VDC(L/R=7ms)
1CO Inductive load
250VAC COSØ0.4
1CO Resistive load
1CO＼3CO＼4CO Resistive load
2CO＼3CO＼4CO Inductive load
2CO＼3CO＼4CO Inductive load
24VDC (L/R=7ms)
250VAC COSØ0.4
1x106
0.1 0.3 1 3 7 10 16
5x105
3x105
1x105
• Arc shield
• High dielectric strength: 2,000 V
• Approvals with UL/CSA TUV
DRL Power Relay
*For bases & other accessories please go to page 44
DRL Power Relay
29
220 V DC
220 V DC
165 V / 22 V
3CO 4CO
1.4 W 1.5 W
6.7 mA 7.6 mA
33,000Ω ±10% 29,000Ω ±10%
12 V DC 48 V DC 110 V DC
12 V DC
9 V / 1.2 V
3CO 4CO
1.4 W 1.5 W
120 mA 125 mA
100Ω ±10% 96Ω ±10%
24 V DC
24 V DC
18 V / 2.4 V
3CO 4CO
1.4 W 1.5 W
60 mA 66.7 mA
400Ω ±10% 360Ω ±10%
48 V DC
36 V / 4.8 V
3CO 4CO
1.4 W 1.5 W
30 mA 31.2 mA
1,600Ω ±10% 1,540Ω ±10%
24 V AC
19.2 V / 7.2 V
3CO 4CO
2 VA 2.5 VA
80 mA 93.5 mA
102Ω ±10% 80Ω ±10%
115 V AC
92 V / 34.5 V
3CO 4CO
2 VA 2.5 VA
16 mA 25.5 mA
2,300Ω ±10% 1,680Ω ±10%
230 V AC
184 V / 69 V
3CO 4CO
2 VA 2.5 VA
10 mA 13.1mA
8,600Ω ±10% 6700Ω ±10%
110 V DC
82.5 V / 11 V
3CO 4CO
1.4 W 1.5 W
13.1 mA 16.2 mA
8,400Ω ±10% 6,800Ω ±10%
24 V AC 230 V AC115 V AC
DRL
DRL570012L DRL570024L DRL570048L DRL570110L DRL570220L
1133620000 1133630000 1133640000 1133650000 1133660000
DRL570524L DRL570615L DRL570730L
1133940000 1133950000 1133960000
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current
Coil resistance
Type
Order No.
4 change over contact 4CO
Ordering information
Ordering information
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current (50 Hz)
Coil resistance
Type
Order No.
4 change over contact 4CO
Type code
Type code
Type DRL
Type of construction
370 3 change over contact
570 4 change over contacts
Coil voltage
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
615 115Vac / 730 230Vac
LED indicator
DRL Power Relay
4 change over contacts, AC/DC coil
DRL Power Relay
*For bases & other accessories please go to page 44
DRL Power Relay
30
DC
1
2
3
45
6
7
8
AC
1
2
3
45
6
7
8
34.5(max)
34.5(max)
9.5(max) 52.5(max)
66
1x106
5x105
3x105
1x105
DRR Power Relay
2 change over contacts, AC/DC coil
• 2500 VA switchover capacity
• 8-pin octical plug in DIN rail installation
• International approval CE TÜV
Circuit diagram
PIN top view
Dimensions are in mm
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Min. in package
Dimensions
Length x Width x Height
250 V AC
10A
AgCdO
12 V / 100 mA
< 50 mΩ
> 10 × 104 cycles (1,800 cycles / hour)
< 30 ms / < 20 ms
AC: ≤ 80% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 15% of rated voltage
110% of raged voltage
2.7 VA / 1.5 W
- 25 … 55˚C
- 25 … 55˚C
5 … 85 %
2,000V AC / 1 min
1,200V AC / 1 min
1,800V AC / 1 min
1.5 mm / 4 mm
250 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
75g
10
34.5 x 34.5 x 66 mm
DC current [A]
DC coil operation range
AC coil operation range
Ambient temperature[˚C]
Ambient temperature[˚C]
Switching current [A]
Electrical life
DC voltage [V]
Max. DC load contact on-off curve
Resistive load
Inductive load
Inductive load
Switching cycles [times]
DRR Octal Power Relay
*For bases & other accessories please go to page 44
DRR Octical Power Relay
31
12 V DC 2CO 48 V DC 2CO 110 V DC 2CO 220 V DC 2CO
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current
Coil resistance
24 V DC 2CO
24 V AC 2CO 230 V AC 2CO
24 V AC
19.2 V / 7.2 V
2.7 VA
130 mA/116 mA
62.5Ω ±10%
115 V AC 2CO
115 V AC
92 V / 34.5 V
2.7 VA
29.8 mA/25.4 mA
1250Ω ±10%
230 V AC
184 V / 69 V
2.7 VA
14.9 mA/12.7 mA
6500Ω ±10%
DRR270524L DRR270615L DRR270730L
DRR
12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
9 V / 1.8 V 18 V / 3.6 V 36 V / 7.2 V 82.5 V / 16.5 V 165 V / 33 V
1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
125 mA 55.8 mA 29.3 mA 14.9 mA 7.5 mA
96Ω ±10% 430Ω ±10% 1640Ω ±10% 7360Ω ±10% 29500Ω ±10%
DRR270012L DRR270024L DRR270048L DRR270110L DRR270220L
1133360000 1133370000 1133380000 1133390000 1133400000
1133760000 1133780000 1133800000
Type
Order No.
Ordering information
DRR Power Relay
2 change over contacts, AC/DC coil
Type code
Type code
Type DRR
Type of construction
270 2 change over contacts
Coil voltage
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
615 115Vac / 730 230Vac
LED indicator
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current (50 Hz/60Hz)
Coil resistance
Type
Order No.
Ordering information
DRR Octal Power Relay
*For bases & other accessories please go to page 44
DRR Octical Power Relay
32
DRR Power Relay
3 change over contacts, AC/DC coil
Circuit diagram
PIN top view
Dimensions are in mm
34.5(max)
34.5(max)
9.5(max) 52.5(max)
66
1x106
5x105
3x105
1x105
• 2500 VA switchover capacity
• 11-pin plug in DIN rail installation
• International approval CE TÜV
DC current [A]
AC coil operation range
DC coil operation range
Ambient temperature[˚C]
Ambient temperature[˚C]
Switching current [A]
Electrical life
DC voltage [V]
Max. DC load contact on-off curve
Resistive load
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Min. in package
Dimensions
Length x Width x Height
250 V AC
10A
AgNi 90/10
12 V / 100 mA
< 50 mΩ
> 10 × 104 cycles (1,800 cycles / hour)
< 30 ms / < 20 ms
AC: ≤ 80% of rated voltage
DC: ≤ 80% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 15% of rated voltage
110% of raged voltage
2.7 VA / 1.5 W
- 25 … 55˚C
- 25 … 55˚C
5 … 85 %
2,500V AC / 1 min
2,500V AC / 1 min
1,800V AC / 1 min
1.5 mm / 4 mm
250 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
75g
10
34.5 x 34.5 x 66 mm
Inductive load
Inductive load
Switching cycles [times]
1
2
3
4
567
8
9
10
11
1
2
3
4
567
8
9
10
11 1
2
3
4
567
8
9
10
11
1
2
3
4
567
8
9
10
11
DC
AC DRR310DRR310A
3CO AC
3CO DC
DRR Octal Power Relay
*For bases & other accessories please go to page 44
DRR Octical Power Relay
33
DRR Octal Power Relay
*For bases & other accessories please go to page 44
DRR Octical Power Relay
12 V DC 3CO 48 V DC 3CO 110 V DC 3CO 220 V DC 3CO24 V DC 3CO
24 V AC 3CO 230 V AC 3CO
24 V AC
19.2 V / 7.2 V
2.7 VA
130 mA/116 mA
62.5Ω ±10%
115 V AC 3CO
115 V AC
92 V / 34.5 V
2.7 VA
29.8 mA/25.4 mA
1250Ω ±10%
230 V AC
184 V / 69 V
2.7 VA
14.9 mA/12.7 mA
6500Ω ±10%
DRR370524L DRR370615L DRR370730L
DRR
1133810000 1133820000 1133830000
DRR370012L DRR370024L DRR370048L DRR370110L DRR370220L
1133410000 1133420000 1133430000 1133440000 1133560000
12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
9 V / 1.8 V 18 V / 3.6 V 36 V / 7.2 V 82.5 V / 16.5 V 165 V / 33 V
1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
125 mA 55.8 mA 29.3 mA 14.9 mA 7.5 mA
96Ω ±10% 430Ω ±10% 1640Ω ±10% 7360Ω ±10% 29500Ω ±10%
DRL Power Relay
3 change over contacts, AC/DC coil
Type code
Type DRR
Type of construction
370 3 change over contacts
Coil voltage
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
615 115Vac / 730 230Vac
LED indicator
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current
Coil resistance
Type
Order No.
DRR370012L-A DRR370024L-A DRR370048L-A DRR370110L-A DRR370220L-A
7760056250 7760056251 7760056252 7760056253 7760056254
Type
Order No.
Ordering information
Ordering information
Input
Rated voltage
Response / dropout voltage
Power consumption
Rated coil current (50 Hz/60Hz)
Coil resistance
Type
Order No.
DRR370524L-A DRR370615L-A DRR370730L-A
7760056255 7760056256 7760056257
Type
Order No.
Ordering information
34
1NO
1NC
Coil voltage [U/Un]
Switching cycles [times]
Coil voltage [U/Un]
Max 36mm
4.7mm
Max 36mm
Max 48mm
Max 8.5mm
DC AC
DC AC
22.2
A B
1 3
36
36
21.58.5
22.2
A B
4 6
36
(4)14
(6)34
(A)A1 (B)A2
(1)12
(3)32
(A)A1 (B)A2
(1)12
(3)32
(A)A1 (B)A2
(4)14
(6)34
(A)A1 (B)A2
36
16
8.5
DRH DC Relay
1 N.O. contact and 1 N.C. contact AC / DC coil
• Suitable to switch heavy DC loads
• Arc shield
• With LED and test lever
• Approval with CE, UL, TÜV
Switching current[A]Switching current[A]
Circuit diagram
PIN top view
Dimensions are in mm
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Max. switching frequency at rated load
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Dimensions
Length x Width x Height
AC: 500 V; DC: 220 V
16 A@ 500 VAC; 10 A@ 220 VDC
AgSnO2
12 VDC / 100 mA
< 50 mΩ
> 10 × 104 cycles
< 20 ms / < 20 ms
1 Hz
AC: ≤ 80% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 10% of rated voltage
110% of raged voltage
2.5 VA / 1.5 W
- 40˚C … 60˚C
- 40˚C … 60˚C
35 … 85 %
4,000V AC / 1 min
2,500V AC / 1 min
4,000V AC / 1 min
1.5 mm / 4 mm
400 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
48 g
36 x 36 x 48 mm
Ambient temperature[˚C]
Ambient temperature[˚C]
AC coil operation range
Electrical life Max. DC load contact on-off curveDC coil operation range
Switching voltage (VDC)
Max. voltage
Normal voltage
Max. voltage
Normal voltage
DRH DC Power Relay
*For bases & other accessories please go to page 44
DRH DC Power Relay
35
12 V DC 48 V DC 110 V DC
12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
9 V / 1.2 V 18 V / 2.4 V 36 V / 4.8 V 82.5 V / 11 V 165 V / 22 V
1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
120 mA 60 mA 30 mA 13.03 mA 6.7 mA
100Ω ±10% 400Ω ±10% 1,600Ω ±10% 8,400Ω ±10% 33,000Ω ±10%
24 V DC 220 V DC
24 V AC2CO 48 V AC 2CO 115 V AC 2CO 230 V AC 2CO
DRH
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
548 48Vac / 615 115Vac
730 230Vac
DRH173012LT DRH173024LT DRH173048LT DRH173110LT DRH173220LT
DRH174012LT DRH174024LT DRH174048LT DRH174110LT DRH174220LT
1219840000 1219850000 1219860000 1219870000 1219880000
1219940000 1219950000 1219960000 1219970000 1219980000
DRH173524LT DRH173548LT DRH173615LT DRH173730LT
DRH174012LT DRH174024LT DRH174048LT DRH174110LT
1219890000 1219910000 1219920000 1219930000
1219990000 1220010000 1220020000 1220030000
24 V AC 48 V AC 115 V AC 230 V AC
19.2V / 7.2 V 38.4 V / 14.4 V 92 V / 34.5 V 184 V / 69 V
2.5 VA 2.5 VA 2.5 VA 2.5 VA
101.7 mA 51.04 mA 21.2 mA 10.61 mA
100Ω ±10% 350Ω ±10% 2,200Ω ±10% 8,000Ω ±10%
Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW
7760056249 7760056249 7760056249 7760056249 7760056249
7760056249 7760056249 7760056249 7760056249
Ordering information
Ordering information
DRH DC Relay
1 N.O. contact and 1 N.C. contact AC / DC coil
Ordering information
Type code
Type DRH
Type of construction
173 1NO
174 1NC
Coil voltage
With LED or test lever
LT
Input
Rated voltage
DC response / dropout voltage
Power consumption
DC rated current
Coil resistance
Type
Order No.
Type
Order No.
Type
Order No.
Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW
1 N.O. contact
1 N.C. contact
With test lever locking clip
Ordering information
Input
Rated voltage
AC response / dropout voltage
Power consumption
AC rated current
Coil resistance
Type
Order No.
Type
Order No.
Type
Order No.
1 N.O. contact
1 N.C. contact
With test lever locking clip
DRH DC Power Relay
*For bases & other accessories please go to page 44
DRH DC Power Relay
36
2NO
1NO/1NC
Electrical life
Max 36mm
4.7mm
Max 36mm
Max 48mm
Max 8.5mm
(6)34
(4)14
(A)A1
(9)31
(7)11
(B)A2
(6)34
(4)14
(A)A1
(9)31
(7)11
(B)A2
DC AC
DC AC
22.2
A B
7 9
4
3
36
36
5.57.7
16
8.5
(4)14
(3)32
(9)31
(7)11
(A)A1 (B)A2
(4)14
(3)32
(9)31
(7)11
(A)A1 (B)A2
22.2
A B
4 6
7 9
36
36
16
8.5 7.7
Switching current[A]Switching current[A]
Ambient temperature[˚C]
Ambient temperature[˚C]
AC coil operation range
Max. DC load contact on-off curveDC coil operation range
DRH DC Relay
2 N.O. contact and 1 N.C. contact AC / DC coil
• Suitable to switch heavy DC loads
• Arc shield
• With LED and test lever
• Approval with CE, UL, TÜV
Output
Max. switching voltage
Continuous current 2NO
1NO/1NC
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Max. switching frequency at rated load
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Electrical strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Dimensions
Length x Width x Height
AC: 250 V; DC: 220 V
16 A@ 250 VAC; 3 A@ 220 VDC
16 A@ 250 VAC; 5 A@ 220 VDC
AgSnO2
12 VDC / 100 mA
< 50 mΩ
> 10 × 104 cycles
< 20 ms / < 20 ms
1 Hz
AC: ≤ 80% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 10% of rated voltage
110% of raged voltage
2.5 VA / 1.5 W
- 40 … 60˚C
- 40 … 60˚C
35 … 85 %
4,000V AC / 1 min
2,500V AC / 1 min
4,000V AC / 1 min
1.5 mm / 4 mm
400 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
48 g
36 x 36 x 48 mm
Circuit diagram
PIN top view
Dimensions are in mm
Switching voltage (VDC)
Coil voltage [U/Un]
Switching cycles [times]
Coil voltage [U/Un]
Max. voltage
Normal voltage
Normal voltage
Max. voltage
DRH DC Power Relay
*For bases & other accessories please go to page 44
DRH DC Power Relay
37
12 V DC 48 V DC 110 V DC24 V DC 220 V DC
24 V AC2CO 48 V AC 2CO 115 V AC 2CO 230 V AC 2CO
DRH
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
548 48Vac / 615 115Vac
730 230Vac
Type code
Type DRH
Type of construction
275 1NO/1NC
276 2NO
Coil voltage
With LED or test lever
LT
DRH275012LT DRH275024LT DRH275048LT DRH275110LT DRH275220LT
DRH276012LT DRH276024LT DRH276048LT DRH276110LT DRH276220LT
1220040000 1220050000 1220060000 1220070000 1220080000
1220140000 1220150000 1220170000 1220180000 1220190000
DRH275524LT DRH275548LT DRH275615LT DRH275730LT
DRH276524LT DRH276548LT DRH276615LT DRH276730LT
1220090000 1220110000 1220120000 1220130000
1220200000 1220210000 1220220000 1220230000
12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
9 V / 1.2 V 18 V / 2.4 V 36 V / 4.8 V 82.5 V / 11 V 165 V / 22 V
1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
120 mA 60 mA 30 mA 13.03 mA 6.7 mA
100Ω ±10% 400Ω ±10% 1,600Ω ±10% 8,400Ω ±10% 33,000Ω ±10%
24 V AC 48 V AC 115 V AC 230 V AC
19.2V / 7.2 V 38.4 V / 14.4 V 92 V / 34.5 V 184 V / 69 V
2.5 VA 2.5 VA 2.5 VA 2.5 VA
101.7 mA 51.04 mA 21.2 mA 10.61 mA
100Ω ±10% 350Ω ±10% 2,200Ω ±10% 8,000Ω ±10%
Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW
Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW
7760056249 7760056249 7760056249 7760056249 7760056249
7760056249 7760056249 7760056249 7760056249
Type
Order No.
DRH DC Relay
2 N.O. contact and 1 N.C. contact AC / DC coil
Ordering information
Input
Rated voltage
DC response / dropout voltage
Power consumption
DC rated current
Coil resistance
Ordering information
Type
Order No.
Type
Order No.
1 N.O. contact/
1 N.C. contact
2 N.O. contact
With test lever locking clip
Ordering information
Input
Rated voltage
DC response / dropout voltage
Power consumption
DC rated current
Coil resistance
Type
Order No.
Ordering information
Type
Order No.
Type
Order No.
1 N.O. contact/
1 N.C. contact
2 N.O. contact
With test lever locking clip
DRH DC Power Relay
*For bases & other accessories please go to page 44
DRH DC Power Relay
38
DRW Power Relay
2CO / 3CO contacts
AC / DC coil
2CO
3CO
Max 36mm
4.7mm
Max 36mm
Max 48mm
Max 8.5mm
DC AC
22.2
11.1
A B
456
123
789
36
22.2
36
36
5.57.7
16
8.5
BA
4 6
1 3
7 9
36
5.57.7
16
8.5
(4)14
(1)12
(5)24
(2)22
(3)32
(6)34
(9)31
(7)11
(8)21
(10)A1 (11)A2
(4)14
(1)12
(5)24
(2)22
(3)32
(6)34
(9)31
(7)11
(8)21
(10)A1 (11)A2
DC AC
(4)14
(1)12
(3)32
(6)34
(9)31
(7)11
(A)A1 (B)A2
(4)14
(1)12
(3)32
(6)34
(9)31
(7)11
(A)A1 (B)A2
Electrical life
Switching current[A] Switching current[A]
Ambient temperature[˚C]
Ambient temperature[˚C]
AC coil operation range
Max. DC load contact on-off curveDC coil operation range
Switching voltage (VDC)
• Suitable to switch high voltage AC loads
• With LED and test lever
• Approval with CE, UL, TÜV
Circuit diagram
PIN top view
Dimensions are in mm
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Max. switching frequency at rated load
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Dimensions
Length x Width x Height
400 V AC
16 A@ 400 VAC; 16 A@ 30 VDC
AgCdO
12 VDC / 100 mA
< 50 mΩ
> 10 × 104 cycles
< 20 ms / < 10 ms
1 Hz
AC: ≤ 80% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 30% of rated voltage
DC: ≥ 10% of rated voltage
110% of raged voltage
2.5 VA / 1.5 W
2CO: - 40 ... 60˚C; 3CO: - 40 ... 50˚C;
- 40 … 60˚C
35 … 85 %
4,000V AC / 1 min
2,500V AC / 1 min
4,000V AC / 1 min
3.5 mm / 6 mm
400 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV; UL
51 g
36 x 36 x 48 mm
Coil voltage [U/Un]
Switching cycles [times]
Coil voltage [U/Un]
Max. voltage
Normal voltage
Max. voltage
Normal voltage
DRW AC Power Relay
*For bases & other accessories please go to page 44
DRW AC Power Relay
39
12 V DC 48 V DC 110 V DC
12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
9 V / 1.2 V 8 V / 2.4 V 36 V / 4.8 V 82.5 V / 11 V 115 V / 22 V
1.5 W 1.5 W 1.5 W 1.5 W 1.5 W
120 mA 60 mA 30 mA 13.03 mA 6.7 mA
100Ω ±10% 400Ω ±10% 1,600Ω ±10% 8,400Ω ±10% 33,000Ω ±10%
24 V DC 220 V DC
24V AC 48V AC 115V AC 230V AC 400V AC
DRW
012 12Vdc / 024 24Vdc
048 48Vdc / 110 110Vdc
220 220Vdc / 524 24Vac
548 48Vac / 615 115Vac
730 230Vac / 900 400Vac
DRW270012LT DRW270024LT DRW270048LT DRW270110LT DRW270220LT
DRW370012LT DRW370024LT DRW370048LT DRW370110LT DRW370220LT
1219730000 1219740000 1219750000 1219760000 1219770000
1219780000 1219790000 1219810000 1219820000 1219830000
DRW270524LT DRW270548LT DRW270615LT DRW2701730LT DRW270900LT
DRW370524LT DRW370548LT DRW370615LT DRW370730LT DRW370900LT
1219350000 1219360000 1219370000 1219380000 1219390000
1219410000 1219420000 1219430000 1219440000 1219450000
24 V AC 48 V AC 115 V AC 230 V AC 400 V AC
19.2V / 7.2 V 38.4 V / 14.4 V 92 V / 34.5 V 184 V / 69 V 320 V / 120 V
2.5 VA 2.5 VA 2.5 VA 2.5 VA 2.5 VA
101.7 mA 51.04 mA 21.2 mA 10.61 mA 6.1 mA
100Ω ±10% 350Ω ±10% 2,200Ω ±10% 8,000Ω ±10% 30,000Ω ±10%
DRW power relay
2CO / 3CO contacts
AC / DC coil
Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW
Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW Test lever block for DRH/DRW
7760056249 7760056249 7760056249 7760056249 7760056249
7760056249 7760056249 7760056249 7760056249 7760056249
Type code
Type DRW
Type of construction
270 2CO
174 1NC
Coil voltage
With LED or test lever
LT
Ordering information
Input
Rated voltage
DC response / dropout voltage
Power consumption
DC rated current
Coil resistance
Ordering information
Input
Rated voltage
AC response / dropout voltage
Power consumption
AC rated current
Coil resistance
Type
Order No.
Ordering information
Type
Order No.
Type
Order No.
2CO contact
3CO contact
With test lever locking clip
Type
Order No.
Ordering information
Type
Order No.
Type
Order No.
2CO contact
3CO contact
With test lever locking clip
DRW AC Power Relay
*For bases & other accessories please go to page 44
DRW AC Power Relay
40
•
•
•
1NO
34max50.5max
50.5max 34max
36.5max
55max
7.5
10
0 1
4 6
36.8
17.7
0 1
64
14.4
6- Ø3.2
PWR high power relay
1 N.O. contact
AC / DC coil
Switching current[A] Switching current[A]
Ambient temperature[˚C]
Ambient temperature[˚C]
AC coil operation range
Switching voltage (VDC)
• Max. load current: 30 A
• Various mounting methods available
• Approvals with CE, UL, TÜV
Circuit diagram
PIN top view
Dimensions are in mm
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Dimensions
Length x Width x Height
277 V AC
30 A
Ag alloy
12 VDC / 100 mA
< 50 mΩ
> 10 × 104 cycles
< 20 ms / < 10 ms
AC: ≤ 75% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 15% of rated voltage
DC: ≥ 15% of rated voltage
110% of raged voltage
2.5 VA / 1.9 W
- 25 … 55˚C
- 25 … 55˚C
35 … 85 %
2,000V AC / 1 min
2,000V AC / 1 min
4,000V AC / 1 min
3.5 mm / 6 mm
250 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV
Push-in connection/PCB welding: 90g; DIN-rail mounting: 120g
34 x 50.5 x 36.5 mm
Electrical life Max. DC load contact on-off curveDC coil operation range
Coil voltage [U/Un]
Switching cycles [times]
Coil voltage [U/Un]
Max. voltage
Normal voltage
Max. voltage
Normal voltage
PWR High Power Relay
*For bases & other accessories please go to page 44
PWR High Power Relay
41
6 V DC 12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
4.5 V / 0.9 V 9 V / 1.8 V 18 V / 3.6 V 36 V / 7.2 V 82.5 V / 16.5 V 165 V / 33 V
1.9 W 1.9 W 1.9 W 1.9 W 1.9 W 1.9 W
317 mA 160 mA 79.2 mA 39.3 mA 17.3 mA 8.6 mA
18.9Ω ±10% 75Ω ±10% 303Ω ±10% 1,220Ω ±10% 6,360Ω ±10% 25,474Ω ±10%
PWR
PWR153006LT PWR153012LT PWR153024LT PWR153048LT PWR153110LT PWR153220LT
PWR173006L PWR173012L PWR173024L PWR173048L PWR173110L PWR173220L
1219590000 1219610000 1219620000 1219630000 1219640000 1219650000
1219460000 1219470000 1219480000 1219490000 1219510000 1219520000
PWR153524LT PWR153548LT PWR153615LT PWR153730LT PWR153880LT
PWR173524L PWR173548L PWR173615L PWR173730L PWR173880L
1219230000 1219240000 1219250000 1219260000 1219270000
1219090000 1219120000 1219130000 1219140000 1219150000
006 6Vdc / 012 12Vdc
024 24Vdc / 048 48Vdc
110 110Vdc / 220 220Vdc
524 24Vac / 548 48Vac
615 115Vac / 730 230Vac
880 380Vac
PWR high power relay
1 N.O. contact
AC / DC coil
6 V DC 1NO 12 V DC 1NO 24 V DC 1NO 48 V DC 1NO 110 V DC 1NO 220 V DC 1NO
24 V AC 48 V AC 115 V AC 230 V AC 115 V AC
18V / 3.6 V 36 V / 7.2 V 86.3 V / 17.3 V 172.5 V / 34.5 V 285 V / 57 V
2.5 VA 2.5 VA 2.5 VA 2.5 VA 2.5 VA
87.3 mA 43.6 mA 22.1 mA 11.0 mA 6.1 mA
275Ω ±10% 1,100Ω ±10% 5,200Ω ±10% 21,000Ω ±10% 62,650Ω ±10%
24 V AC 1NO 48 V AC 1NO 115 V AC 1NO 230 V AC 1NO 380 V AC 1NO
Type code
Type PWR
Type of construction and mounting
153 1N.O. contact, push-in connection
173 1N.O. contact, DIN-rail mounting
Coil voltage
L with LED
T with test lever
P PCB welding
Ordering information
Input
Rated voltage
DC response / dropout voltage
Power consumption
DC rated current
Coil resistance
*Note: PCB Soldering connection available.
Type
Order No.
Ordering information
Type
Order No.
plug-in, need socket
Din rail installation, no
need socket
Ordering information
Input
Rated voltage
AC response / dropout voltage
Power consumption
AC rated current
Coil resistance
Type
Order No.
Ordering information
Type
Order No.
Din-rail mounting
without socket
Push-in connection with
socket
*Note: PCB Soldering connection available.
PWR High Power Relay
*For bases & other accessories please go to page 44
PWR High Power Relay
42
2NO
34max50.5max
50.5max 34max
36.5max
55max
7.5
10
36.8
17.7
0 1
6 842
14.4
6- Ø3.2
0 1
2 4 6 8
Switching current[A] Switching current[A]
Ambient temperature[˚C]
Ambient temperature[˚C]
AC coil operation range
PWR high power relay
2 N.O. contact
AC / DC coil
• Max. load current: 25 A
• Various mounting methods available
• Approvals with CE, UL, TÜV
Circuit diagram
PIN top view
Dimensions are in mm
Output
Max. switching voltage
Continuous current
Contact material
Min. load voltage / current
Contact resistance (initial)
Electrical endurance
Response / dropout delay
Input
Response voltage @ 25˚C
Dropout voltage @ 25˚C
Max. voltage @ 25˚C
Coil power consumption
General
Operation temperature
Storage temperature
Humidity
Dielectric strength Coil-contact
Between N.O. contacts
Between adjacent contacts
Clearance / creepage distance
Insulation IEC60664
Rated voltage
Pollution degree
Overvoltage category
Vibration resistance
Shock resistance
Approval
Weight
Dimensions
Length x Width x Height
277 V AC
25 A
Ag alloy
12 VDC / 100 mA
< 50 mΩ
> 10 × 104 cycles
< 30 ms / < 30 ms
AC: ≤ 75% of rated voltage
DC: ≤ 75% of rated voltage
AC: ≥ 15% of rated voltage
DC: ≥ 15% of rated voltage
110% of raged voltage
2.5 VA / 1.9 W
- 25 … 55˚C
- 25 … 55˚C
35 … 85 %
2,000V AC / 1 min
2,000V AC / 1 min
4,000V AC / 1 min
1.5 mm / 4 mm
250 V
3
III
10~55Hz dual amplitude: 1.0mm
10G (half wave of sine pulse: 11ms)
CE; TÜV
Push-in connection/PCB welding: 90g; DIN-rail mounting: 120g
34 x 50.5 x 36.5 mm
Electrical life Max. DC load contact on-off curveDC coil operation range
Switching voltage (VDC)
Coil voltage [U/Un]
Switching cycles [times]
Coil voltage [U/Un]
Max. voltage
Normal voltage
Max. voltage
Normal voltage
PWR High Power Relay
*For bases & other accessories please go to page 44
PWR High Power Relay
43
6 V DC 12 V DC 24 V DC 48 V DC 110 V DC 220 V DC
4.5 V / 0.9 V 9 V / 1.8 V 18 V / 3.6 V 36 V / 7.2 V 82.5 V / 16.5 V 165 V / 33 V
1.9 W 1.9 W 1.9 W 1.9 W 1.9 W 1.9 W
317 mA 160 mA 79.2 mA 39.3 mA 17.3 mA 8.6 mA
18.9Ω ±10% 75Ω ±10% 303Ω ±10% 1,220Ω ±10% 6,360Ω ±10% 25,474Ω ±10%
PWR
006 6Vdc / 012 12Vdc
024 24Vdc / 048 48Vdc
110 110Vdc / 220 220Vdc
524 24Vac / 548 48Vac
615 115Vac / 730 230Vac
880 380Vac
PWR256006LT PWR256012LT PWR256024LT PWR256048LT PWR256110LT PWR256220LT
PWR276006L PWR276012L PWR276024L PWR276048L PWR276110L PWR276220L
1219660000 1219670000 1219680000 1219690000 1219710000 1219720000
1219530000 1219540000 1219550000 1219560000 1219570000 1219580000
PWR256524LT PWR256548LT PWR256615LT PWR256730LT PWR256880LT
PWR276524L PWR276548L PWR276615L PWR276730L PWR276880L
1219280000 1219290000 1219320000 1219330000 1219340000
1219160000 1219170000 1219180000 1219190000 1219220000
6 V DC 2NO 12 V DC 2NO 24 V DC 2NO 48 V DC 2NO 110 V DC 2NO 220 V DC 2NO
24 V AC 48 V AC 115 V AC 230 V AC 115 V AC
18V / 3.6 V 36 V / 7.2 V 86.3 V / 17.3 V 172.5 V / 34.5 V 285 V / 57 V
2.5 VA 2.5 VA 2.5 VA 2.5 VA 2.5 VA
87.3 mA 43.6 mA 22.1 mA 11.0 mA 6.1 mA
275Ω ±10% 1,100Ω ±10% 5,200Ω ±10% 21,000Ω ±10% 62,650Ω ±10%
24 V AC 2NO 48 V AC 2NO 115 V AC 2NO 230 V AC 2NO 380 V AC 2NO
Type code
Type PWR
Type of construction and mounting
256 2N.O. contact, push-in connection
276 2N.O. contact, DIN-rail mounting
Coil voltage
L with LED
T with test lever
P PCB welding
Type
Order No.
Ordering information
Type
Order No.
plug-in , need socket
Din rail installation,no
need socket
PWR high power relay
2 N.O. contact AC / DC coil
Ordering information
Input
Rated voltage
DC response / dropout voltage
Power consumption
DC rated current
Coil resistance
Ordering information
Input
Rated voltage
AC response / dropout voltage
Power consumption
AC rated current
Coil resistance
Type
Order No.
Type
Order No.
Ordering information
plug-in , need socket
Din rail installation,no
need socket
*Note: PCB Soldering connection available.
*Note: PCB Soldering connection available.
PWR High Power Relay
*For bases & other accessories please go to page 44
PWR High Power Relay
44
4 x 6 A, 3 x 10 A, 2 x 12 A
300 Vac
>4000 Vrms
C / 250 Vac
-40...+70°C
IP 20
VBG 4
2 x 2.5 mm2 / 2 x 1.5 mm2
0.5 Nm / 0.8 Nm
10 pcs.
22.5
27
75
3.2
75
29
61
Base connected by screws, DIN-rail mounting
Ordering information
Separated base (for RCM and DRM relays)
Type Order No.
SCM 2CO 8690880000
SCM ECO 2CO* 7760056007
SCM 4CO 8690900000
SCM ECO 4CO* 7760056008
Technical data
Rated current
Rated voltage
Coil/contact electrical strength
Insulation (VDE 0110b)
Ambient temperature
Protection level
Electric shock prevention category
Wire cross section / with terminal
Wiring torque / max.
Packing unit
Description
Base connected by screws, DIN-rail mounting, 2CO
Base connected by screws, DIN-rail mounting, 4CO
* SRC ECO base already have plastic release clip and mark
Relay clips (plastic and metal)
Type Order No.
SCM CLIP P 8691110000
SCM CLIP M 7760056039
Mark SCM ECO 7760056179
Ordering information
For SCM 2CO, SCM 3CO and SCM 4CO
Description
Plastic clip for RCM of 29 mm
Metal clip for RCM of 29 mm
Accessories
Mark, for SRC ECO relay base
Dimensions are in mm
12A/10A
300Vac
2500Vrms
2500Vrms
0.5Nm/0.8Nm
0.5-2.5 mm2
-40°C...+70°C
35g/43g
20pcs
Dimensions are in mm
FS 2CO* 7760056106
FS 4CO 7760056107
Mark FS 7760056180
* Functional module is not suitable for this type of base.
31Max 29.5Max 25Max
25Max
29.5Max
22Max
66.5Max
66.5Max
71
Hybrid base (for RCM and DRM relay)
Technical data
Rated current 2CO/4CO
Rated voltage
Dielectric withstand voltage / coil-contacts
Dielectric withstand voltage / between contacts
Wiring torque / max.
Wire
Environments
Weight 2CO/4CO
Min. in package
Ordering information
Description
DIN-Rail mounting base 2CO
DIN-Rail mounting base 4CO
Accessories
Mark, for SRC ECO relay base
Note: FS base already have marks.
Type Order No.
Relay Base
Relay Base
45
Dimensions are in mm
7760056108
Metal clip set
7760056128
10A/5A
300V
2000V
2000V
0.5Nm/0.8Nm
0.5-2.5mm2
-40°C...+70°C
43g/56g
20pcs
Technical data
Suppressor diode 6...230Vdc
RC-combined protection110...230 Vac
RC-combined protection110...230Vac with LED *
Green LED 6...24 Vdc with suppressor diode
Green LED 24...60 Vdc with suppressor diode
Green LED 110...230 Vdc with suppressor diode
Green LED 6...24 Vdc / Vac
Green LED 24...60 Vdc / Vac
Green LED 110...230 Vdc / Vac
RIM 1 6/230VDC
RIM 3 110/230VAC
RIM 3 110/230VAC LED
RIM 2 6/24VDC
RIM 2 24/60VDC
RIM 2 110/230VDC
RIM 3 6/24VUC
RIM 3 24/60VUC
RIM 3 110/230VUC
7760056169
7760056014
7760056045
7760056015
7760056016
7760056017
7940018457
7760056018
7940018455
FS 2CO F ECO 1190740000
Order No.
Order No.
FS 4CO F ECO 1190750000
35.5
75Max
29Max
30Max
22Max
30Max
15
22
59
59
35.5
75Max
* For SCM/SRC base only, not for FS base.
Economic base (for RCM and DRM relay)
Technical data
Rated current 2CO/4CO
Rated voltage
Dielectric withstand voltage / coil-contacts
Dielectric withstand voltage / between contacts
Wiring torque / max.
Wire
Environments
Weight 2CO/4CO
Min. in package
Description
DIN-Rail mounting base with finger protection 2CO
DIN-Rail mounting base with finger protection 4CO
Note: functional module is not suitable for this type of base
Ordering information
Metal clip (recommended for vibration applications)
Type
DRM clip M (for DRM relay)
Metal clip set (for DRM relay, only with FS ECO base)
Type Order No.
Type
Functional modules
DRL relay base SLD
SLD F 2CO
SLD F 4CO
7760056225
7760056227
Metal clip
SLD clip 4CO
7760056108
7760056235
300 V
10 A
2,000 V
2,500 V
-40 … 85˚C
2
III
1.0 Nm
0.5 … 2.5 mm2
IP20
CE
Dimensions are in mm
SLD F 2CO
SLD F 4CO
30Max
83.3Max
83.3Max
24.1Max30Max
44.1Max
Ordering information
Ordering information
Technical data
Rated voltage
Rated current
Coil/contact electrical strength
Electrical strength between contacts
Operation temperature
Pollution class
Over voltage class
Wiring torque
Wire cross section
Protection level (IEC 61810)
Approvals
Description
DIN-rail mounted base, 2CO
DIN-rail mounted base, 4CO
Type Order No.
Type Order No.
Technical data
Metal clips SLD F 2CO
Metal clips SLD F 4CO
DRM clip M
Relay Base
Relay Base
46
SPW ECO 3CO 1220250000
Metal clip DRH/DRW 1220260000
400 V AC
16 A
4,000 V
4,000 V
-40 … 60˚C
2
II
1.2 Nm
0.5 … 4 mm2
IP20
64g
CE, UL
Dimensions are in mm
SPW ECO 3CO
22.2
39max
5.5 8.3
1
21.5
31.3Max
92Max
Technical data
Rated voltage
Rated current
Coil/contact electrical strength
Electrical strength between contacts
Operation temperature
Pollution class
Over voltage class
Wiring torque/max.
Wire cross section
Protection level (IEC 61810)
Weight
Approvals
Description
Relay base, for DRH and DRW relays
Metal clip
Ordering information
Type Order No.
DRH relay base
RIM5
6/230VAC
C R
A2 A1
SRD ECO 2CO
SRD ECO 3CO
DRR BASE METAL CLIP
SRD-I CLIP M
RIM 5 6/230Vac
RIM 5 6/230Vdc
1132810000
1132820000
1134160000
8869370000
1174670000
1174650000
Technical data
Rated voltage
Rated current
Coil/contact electrical strength
Electrical strength between contacts
Operating temperature
Pollution class
Over voltage class
Wiring torque
Wire cross section
Protection level (IEC 61810)
Weight
Approvals
Description
DIN-rail mounting rockets, 8-pin
DIN-rail mounting rockets, 11-pin
Metal clip for DRR relay base
Metal clip for RRD relay base
RC combined protection 6 … 230 Vac
Protective diode 6 … 230 Vdc
300 V
12 A
4,000 V
2,500 V
-40 … 85˚C
2
III
1.0 Nm
0.5 … 2.5 mm2
IP20
50 g
CE
SRD ECO 2CO
SRD ECO 3CO
6
22
24 12
5
14
34
A2 A2 21
8
11
1
A1
27 7
IEC:
NEMA:
72
12A 300V
1132810000
0928
73Max
27.2Max
35.5
38.2Max
4
A2
10
A2
10
31
11
21
6
11
1
A1
2
10 2
34
9
32
8
24
7
22
5
14
3
12
4
IEC:
NEMA:
12A 300V
1132820000
0924
73Max
27.2M a x
35.5
38.2Max
4
DRR/RRD relay base
Ordering information
Type Order No.
Dimensions are in mm
Relay Base
Relay Base
47
RIM5
6/230VAC
C R
A2 A1
SRD ECO 2CO
SRD ECO 3CO
DRR SOCKET METAL CLIP
SRD-I CLIP M
RIM 5 6/230Vac
RIM 5 6/230Vdc
10
10
1132810000
1132820000
1134160000
8869370000
1174670000
1174650000
Technical data
Rated voltage
Rated current
Coil/contact electrical strength
Electrical strength between contacts
Operating temperature
Pollution class
Over voltage class
Wiring torque
Wire cross section
Protection level (IEC 61810)
Weight
Approvals
Description
DIN-rail mounting rockets, 8-pin
DIN-rail mounting rockets, 11-pin
Metal clip for DRR relay sockets
Metal clip for RRD relay sockets
RC combined protection 6 … 230 Vac
Protective diode 6 … 230 Vdc
300 V
12 A
4,000 V
2,500 V
-40 … 85˚C
2
III
1.0 Nm
0.5 … 2.5 mm2
IP20
50 g
CE
SRD ECO 2CO
SRD ECO 3CO
6
22
24 12
5
14
34
A2 A2 21
8
11
1
A1
27 7
IEC:
NEMA:
72
12A 300V
1132810000
0928
73Max
27.2Max
35.5
38.2Max
4
A2
10
A2
10
31
11
21
6
11
1
A1
2
10 2
34
9
32
8
24
7
22
5
14
3
12
4
IEC:
NEMA:
12A 300V
1132820000
0924
73Max
27.2M a x
35.5
38.2Max
4
DRR/RRD relay sockets
Ordering information
Type Qty. Order No.
Dimensions are in mm
Relay Base
Relay Base
1220240000SWR
PWR relay base
Shape
Mounting
Product performance
PWR relay base
30 A
400 V AC
2500 V/S
1.0Nm
20-10/0.5-5.5AWG/mm2
-40~+85°C
56g
RELAY BASE SWR
30A 400V
1008
RoHS
COMPLIANT
1220240000
35.5
46Max
51.2Max
10
8 6 4 2
40±0.05
55.5Max
Technical data
Rated current
Rated voltage
Medium withstand voltage
Screw torque
External wire
Environments
Weight
Assembled relays and accessories
Product type Relay type Order No.
48
Relay Base
SRD 2CO PCB 8697750000
SRD 3CO PCB 8697730000
SRD 8-pin
SRD 11-pin
RRD base with PCB pins
10 A
250 VAC
– 40 °C ... +70 °C
SCM 08 PCB 7760056112
SCM 11 PCB 1132790000
SCM 14 PCB 7760056113
metal clip DRM PCB 1209690000
SCM 14 PCB
RCM/DRM base with PCB pins
°C
10 A
250 V AC
– 40 °C ... +80
SPW PCB 1132800000
SPW METAL CLIP 1238770000
SPW PCB
DRH with PCB pins
16 A
400 VAC
– 40 °C ... +70 °C
6A 300V
7760056113 0928
21.8
13.2
30
15.5
4.2
16.8
6.4
4.4
11328000000928
38.5
22.2
35
21.4
5.5 8.4 12
Type Order No.
Technical data
Rated current
Rated voltage
Ambient temperature
Approvals
Description
Base with PCB pins, 2CO
Base with PCB pins, 3CO
Base with PCB pins, 4CO
Metal clip DRM PCB
Ordering information
Technical data
Rated current
Rated voltage
Ambient temperature
Description
Base with PCB pins, 8-pin
Base with PCB pins, 11-pin
Ordering information
Technical data
Rated current
Rated voltage
Ambient temperature
Description
Base with PCB pins, 11-pin
Metal clip SPW PCB
Ordering information
Type Order No.
Type Order No.
Relay Base
49
www.weidmuller.com.au
Previously all standard relays suffered from high hysteresis. This is where there is a large difference
between turn on voltage and drop out voltage. With the MC5R-NEO this is no longer a problem! The
MC5R-NEO has high noise immunity which rejects industrial noise and interference in an ultra slim and
compact housing!
The MC5R-NEO ultra slim electromechanical relay is the first low hysteresis relay designed especially
for the electrically noisy process and control industry.
PREVENT PROBLEMS &
ENSURES OPERATION
LOW HYSTERESIS, NOISE REJECTING RELAY
LED Indication
SPDT Relay
Slimline Housing
Gives visual indication of
relay operation
Ultra Slim Housing, 6mm wide
ensuring maximised space
saving in installation panels
6A/240V Change-over contact
for installation adaptability
Narrow Hysteresis band of only
3.7V. Ensures maximum rejection of
industrial noise and interference
Low Hysteresis
6mm
50
MC5R-NEO
High noise immunity rejects industrial noise
•Rejects interference
•Ultra compact 6mm wide housing
•Change-over contact
•6A/240Vac rated
•Combifoot housing: TS32 & TS35
•4000Vrms isolation
•LED relay state indication
•Input diode protection
•Coil back-EMF diode protection
MC5R-NEO Low Hysteresis Noise Rejecting Relay
Technical Data
Input A (Nominal Voltage) 24Vdc
Nominal Operate current @ 20°C (typical) 7mA
Turn on voltage/current 16.3V / 4.14mA ±10%
Turn off voltage/current 14.1V / 1.38mA ±10%
Output
Type Change-over Contact
Contact material Standard Silver Alloy (Cadmium free)
Gold plated Gold plated silver alloy (for low current switching )
Nominal Switching Capacity 250Vac 6A, 30Vdc 6A (resistive) - Refer to load limit curve
Maximum Continuous Current 6A (at maximum voltage) resistive
Minimum Switching Capacity Standard 12Vdc, 500mA
Gold plated 100mVdc, 0.1mA
Maximum Switching Power 1500VA, 180W
Operate time/Release time (at nominal voltage) 10mS/5mS
Maximum Operating speed 6 operations per second
Contact Life (Resistive load) 60,000 @ 6A resistive 240Vac / 30Vdc
Mechanical life 10,000,000 operations
Isolation
Initial breakdown voltage Between open contacts 750Vac
Between contacts & coil 2000Vac
Surge Strength 4000V
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
Approvals
Certication C Tick
Installation
General
Warning: to be installed/maintained by qualified personnel as per
instructions, or module safety may be compromised.
Designed for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Ordering Information
MC5R Ordering
Nom. Volt. Silver Alloy Contacts Gold Contacts
24Vdc 7940009903 7940013020
Accessories
End Plate AP 1163830000
End Brackets EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
6mm
Height on rail
TS32 - 68mm
TS35 x 7.5 - 63mm
TS35 x 15 - 71mm
76mm
Circuit diagram Mounting
12
14A
110V
MC5R Relays
51
MC5R - Single Channel Change-Over Relay
MC5R Single Channel Change-Over
•Ultracompact6mmwidehousing
•Change-overcontact
•6A/240Vacrated
•Combifoothousing:TS32&TS35
•Combifoothousing:TS32&TS35
•4000Vrmsisolation
•LEDrelaystateindication
•Inputdiodeprotection
•Coil back-EMF diode protection
Circuit diagram Mounting
12
14A
110V
Technical Data
Input A (Nominal Voltage) 12Vdc 24Vdc 48Vdc 220/240Vac 110/120Vac
Nominal Operate Voltage (typical) ---160-250Vac 85-125Vac
Nominal Operate current @ 20°C (typical) 14mA 7mA 15mA 14mA 7mA
Drop-out current @ 20°C (typical) 2.5mA 1.7mA 0.7mA - -
Pick-up current (typical ) 9mA 3.2mA 2.2mA - -
AC Frequency Range ---47-63Hz 47- 63Hz
Output
Type Change-over Contact
Contact material Standard Silver Alloy (Cadmium free)
Gold plated Gold plated silver alloy (for low current switching )
Nominal Switching Capacity 250Vac 6A, 30Vdc 6A (resistive) - Refer to load limit curve
Maximum Continuous Current 6A (at maximum voltage) resistive
Minimum Switching Capacity Standard 12Vdc, 500mA
Gold plated 100mVdc, 0.1mA
Maximum Switching Power 1500VA, 180W
Operate time/Release time (at nominal voltage) 10mS/5mS
Maximum Operating speed 6 operations per second
Contact Life 10,000,000 @ 10mA, 24Vdc
5,000 @ 6A, 250Vac
Mechanical life 10,000,000 operations
Isolation
Initial breakdown voltage Between open contacts 750Vac
Between contacts & coil 2000Vac
Surge Strength 4000V
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
Installation
1000
tlovgnihctiwS )V(ega
Switching Current (A)
Definition of the load limit curve:
In 1000 operations no stationary arc must occur
withaburning arc of >10mS.
100
200
300
500
10
20
30
50
1
2
3
5
0.1 0.2 0.3 0.5 0.7 1 2 3 5 7
10
Load Limit Curve
General
Warning: to be installed/maintained by qualified personnel as
per instructions, or module safety may be compromised.
Design for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Location
To be installed in a metal enclosure.
Ordering Information
MC5R Ordering
Nom. Volt. Silver Alloy
Contacts
Gold Plated
Contacts
12Vdc 7901610000 7906840000
24Vdc 7901620000 7906850000
48Vdc 7901630000 7906860000
110/120Vac 7901500000
220/240Vac 7901520000
Accessories
End Plate AP 7940005681
End Brack-
ets
EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
MC5R Relays
52
Technical Data
Input A(B) Nominal Voltage 12(24)Vdc 24(48)Vdc 12(24)Vac/dc 24(48)Vac/dc
Operating Current (A or B) 14mA 7mA 15mA 7mA
Relay Drop-out current @ 20°C 2.5mA 5.5mA
Relay Pick-up current @ 20°C 11mA 12.5mA
AC Frequency Range 47- 63Hz 47-63Hz
Output
Type Normally Open Contact
Contact material Gold plated silver alloy (for low current switching )
Nominal Switching Capacity 250Vac 4A, 30Vdc 4A (resistive)
Maximum Continuous Current 5A (at maximum voltage) resistive
Minimum Switching Capacity 100mVdc, 0.1mA
Maximum Switching Power 1000VA, 120W
Operate time/Release time (at nominal voltage) 10mS/5mS
Maximum operating speed (at rated load) 20 cycles per second
Contact Life (see also life curve) 100,000 @ 4A, 30Vdc
30,000 @ 5A, 250Vac
Mechanical life 20,000,000 operations
Isolation
Initial breakdown voltage Between open contacts 750Vac
Between contacts
& coil
2000Vac
Surge Strength 4000V
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
MC5R - Single Channel, Dual Voltage
•Dual Input Voltage
•Gold plated normally open contact
•Ultra compact 6mm wide ‘Combifoot’ housing suits
TS32 & TS35
•4000Vrms isolation
•LED relay state indication
•Reverse polarity diode protection
•Coil back-EMF diode protection
MC5R - Single Channel, Dual Voltage, Normally Open Contact
Circuit diagram Mounting
B B
DC AC
A A11 11
0V
0V1
4 14
Installation
3000
300
30
2000
200
20
5000
01x(snoitarepO )
3
Contact Current (A)
500
50
1000
100
120VAC Resistive
120VAC Inductive (cos =0.4)
30VDC/240VAC Resistive
240VAC Inductive (cos =0.4)
30VDC Inductive (cosf=0.4)
30VDC Inductive ( =40mS)
100-120VDC Inductive
( =7-40mS)
0 0.2 0.3 0.5 0.7 1 2 3 5 7
Life Curves
General
Warning: to be installed/maintained by qualified personnel as per
instructions, or module safety may be compromised.
Design for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Location
To be installed in a metal enclosure.
Ordering Information
Nom. Volt. A Nom. Volt. B Cat. No.
12Vdc 24Vdc 7901540000
24Vdc 48Vdc 7901550000
12Vac/dc 24Vac/dc 7901560000
24Vac/dc 48Vac/dc 7901570000
Accessories
End Plate AP 7940005681
End Brackets EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
MC5R Relays
53
Circuit diagram Mounting
Technical Data
Input A(Aux) Nominal Voltage 5-15Vdc logic (24Vdc)
Operating Current (A or B) <0.4mA (7mA)
Relay Drop-out current @ 20°C 5.5mA
Relay Pick-up current @ 20°C 12.5mA
Output
Type Normally Open Contact
Contact material Gold plated silver alloy (for low current switching )
Nominal Switching Capacity 250Vac 4A, 30Vdc 4A (resistive)
Maximum Continuous Current 5A (at maximum voltage) resistive
Minimum Switching Capacity 100mVdc, 0.1mA
Maximum Switching Power 1000VA, 120W
Operate time/Release time (at nominal voltage) 10mS/5mS
Maximum operating speed (at rated load) 20 cycles per second
Contact Life (see also life curve) 100,000 @ 4A, 30Vdc
30,000 @ 5A, 250Vac
Mechanical life 20,000,000 operations
Isolation
Initial breakdown voltage Between open contacts 750Vac
Between contacts
& coil
2000Vac
Surge Strength 4000V
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
MC5R - Single Channel, Logic
•5-15V logic input with 24Vdc supply
•Gold plated normally open contact
•Ultra compact 6mm wide ‘Combifoot’ housing suits
TS32 & TS35
•4000Vrms isolation
•LED relay state indication
•Reverse polarity diode protection
•Coil back-EMF diode protection
Aux
Logic (DC aux.)
A
11
0V
14
MC5R - Single Channel, Logic, Normally Open Contact
Installation
3000
300
30
2000
200
20
5000
01x(snoitarepO )
3
Contact Current (A)
500
50
1000
100
120VAC Resistive
120VAC Inductive (cos =0.4)
30VDC/240VAC Resistive
240VAC Inductive (cos =0.4)
30VDC Inductive (cosf=0.4)
30VDC Inductive ( =40mS)
100-120VDC Inductive
( =7-40mS)
0 0.2 0.3 0.5 0.7 1 2 3 5 7
Life Curves
General
Warning: to be installed/maintained by qualified personnel as per
instructions, or module safety may be compromised.
Design for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Location
To be installed in a metal enclosure.
Ordering Information
MC5R Ordering
MC5R Single NO Relay 7901580000
Accessories
End Plate AP 7940005681
End Brackets EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
MC5R Relays
54
The new TERMSERIES is the NEXT generation of slimline opto coupler from
Weidmuller and incorporates a number of new innovations from its already
highly proven MICROSERIES slimline opto coupler family.
Not only have Weidmuller’s R&D team managed to design the product in a
lower profile space saving housing but they have also managed to increase
the structural strength of the product and most importantly also improve its
performance. If this doesn’t make the new TERMSERIES your number 1 choice
in slimline opto relays then we don’t know what will!
CONSTANT COMMITMENT
TO INNOVATION...
NEW TERMSERIES SLIMLINE HIGH PERFORMANCE
PLUG-IN OPTO COUPLERS
Smaller
The new design reduces
the overall height of
the opto coupler. This
reduction also increases
the structural strength of
the opto coupler.
Timesaving
The ability to cross connect
each input and output will
reduce wiring time.
Visible
With the LED integrated
into the Holddown Clip/
Ejecting lever, Light is
diffused thus indication is
brighter and visible in high
light levels.
www.weidmuller.com.au
55
Page 61 Page 69
Page 72
Contents
Termseries Optos Termopto and Microopto
MC5O
1 CHANNEL TERMOPTO
SOLENOID DRIVE 10A
2 CHANNEL MICROOPTO
SOLENOID DRIVER 1A
ACCESSORIES ACCESSORIES
DUAL VOLTAGE
Optos
Page 55 Page 64
Page 70
Page 57 Page 67
Page 71
Slimline Interface Optocouplers
Specialty Terminal Optocouplers
Slimline Functional Optocouplers
56
Termseries
Solid State Relays
0…48 V DC / 100 mA
0…24 V DC / 2 A
24…230 V AC / 1 A
• Space-saving6.4mmwidth
• 5crossconnectionlevel
• Screwandtensionconnection
• Multivoltageinput:24…230VUC(AC/DC)inoneunit
TERMSERIES - Opto modules
TERMSERIES - Opto modules
AC-Input + RC-Filter
=~
=
==
~
AC/DC-Input
DC-Input
A2
TOS
A1
A2
A1
14 11
14 NO
COM
11
12 NC
Load side
Output
Switching voltage
Frequency range of switching voltage
Continuous current
Peak reverse voltage
Forward voltage
Max. switching frequency at rated load
Short-circuit-proof / Protective circuit
General data
Status indicator / Free-wheel (Input)
Reverse polarity protection (Input)
Ambient temperature (operational)
Storage temperature
Humidity
Reference temperature technical data
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse voltage
Overvoltage category
Pollution degree
Clearage and creepage distance input / output
Total circuit to rail
Dimensions
Clamping range mm²
Height x length x width mm
Note
24 V 0.1 A DC 24 V 2 A DC 230 V 1 A AC
Bipolar transistor MOS-FET Triac
0…48 V DC 0…24 V DC 24…240 V AC
- - 45 Hz … 60 Hz
100 mA 2 A 1 A
54 V 33 V 600 V
< 1 V DC < 120 mV < 1 V
300 Hz 300 Hz 3 Hz
No / Free-wheel diode No / Free-wheel diode
no / -
LED green / yes
yes
-40 °C to 60 °C
-40 °C to 85 °C
5 %...95 %, Tu=40 °C, no condensation
20 °C
300 V
6 kV (1.2 / 50 µs)
III
2
>= 5.5 mm
4 kVeff / 1 min
0.14…1.5 mm²
90 x 88 x 6.4
Control side
Rated control voltage
Input current
Inuit power
Making threshold
Dropout threshold
Ordering data
24 V 0.1 A DC 24 V 2 A DC 230 V 1 A AC
Screw connection
Tension clamp connection
*AC/DC (UC)
24 V…230 V UC (AC/DC) +-10 %
22 mA @ 24 V DC / 4 mA @ 230 V AC (+/- 10 %)
530 mW @ 24 V DC / 930 mW @ 230 V AC
11 V / 20 mA
5 V / 6 mA
24 V - 230 V UC (AC/DC)
TOS 24-230VUC* 48VDC0.1A
1127020000
TOZ 24-230VUC* 48VDC0.1A
1127130000
Note Spare relay type SSS 24V...
TOS 24-230VUC* 24VDC2A
1127250000
TOZ 24-230VUC* 24VDC2A
1127380000
TOS 24-230VUC* 230VAC1A
1127500000
TOZ 24-230VUC* 230VAC1A
1127620000
57
TERMSERIES - Opto modules
Ordering data
Control side
Rated control voltage
Input current AC/DC
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
24 V 0.1 A DC
24 V 2 A DC
230 V 1 A AC
Tension clamp connection
24 V 0.1 A DC
24 V 2 A DC
230 V 1 A AC
Note
5 V DC +-20 %
- / 39 mA
200 mW
3.8 V DC @
1.6 V DC @
5 V DC
TOS 5VDC 48VDC0.1A
1126920000
TOS 5VDC 24VDC2A
1127140000
TOS 5VDC 230VAC1A
1127390000
TOZ 5VDC 48VDC0.1A
1127030000
TOZ 5VDC 24VDC2A
1127270000
TOZ 5VDC 230VAC1A
1127510000
Spare relay type SSS 5V…
12 V DC +-20 %
- / 9.6 mA
115 mW
4.7 V DC @
4.6 V DC @
12 V DC
TOS 12VDC 48VDC0.1A
1126930000
TOS 12VDC 24VDC2A
1127150000
TOS 12VDC 230VAC1A
1127400000
TOZ 12VDC 48VDC0.1A
1127040000
TOZ 12VDC 24VDC2A
1127280000
TOZ 12VDC 230VAC1A
1127520000
Spare relay type SSS 5V…
24 V DC +- 20 %
- / 10…13 mA
140...250 mW
15 V DC @
11 V DC @
24 V DC
TOS 24VDC 48VDC0.1A
1126940000
TOS 24VDC 24VDC2A
1127170000
TOS 24VDC 230VAC1A
1127410000
TOZ 24VDC 48VDC0.1A
1127050000
TOZ 24VDC 24VDC2A
1127290000
TOZ 24VDC 230VAC1A
1127530000
Spare relay type SSS 24V…
24 V UC (AC/DC) +-10 %
11 mA / 6 mA
264 mVA / 154 mW
14 V @
13 V @
24 V UC (AC/DC)
TOS 24VUC* 48VDC0.1A
1126950000
TOS 24VUC* 24VDC2A
1127180000
TOS 24VUC* 230VAC1A
1127420000
TOZ 24VUC* 48VDC0.1A
1127060000
TOZ 24VUC* 24VDC2A
1127300000
TOZ 24VUC* 230VAC1A
1127540000
*AC/DC (UC)
Spare relay type SSS 24V…
48 V UC (AC/DC) +-10 %
6 mA / 4 mA
288 mVA / 192 mW
36 V @
19 V @
48 V UC (AC/DC)
TOS 48VUC* 48VDC0.1A
1126960000
TOS 48VUC* 24VDC2A
1127190000
TOS 48VUC* 230VAC1A
1127430000
TOZ 48VUC* 48VDC0.1A
1127070000
TOZ 48VUC* 24VDC2A
1127310000
TOZ 48VUC* 230VAC1A
1127550000
*AC/DC (UC)
Spare relay type SSS 24V…
Ordering data
Control side
Rated control voltage
Input current AC/DC
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
24 V 0.1 A DC
24 V 2 A DC
230 V 1 A AC
Tension clamp connection
24 V 0.1 A DC
24 V 2 A DC
230 V 1 A AC
Note
60 V UC (AC/DC) +-10 %
5 mA / 3 mA
300 mVA / 180 mW
35 V @
20 V @
60 V UC (AC/DC)
TOS 60VUC* 48VDC0.1A
1126970000
TOS 60VUC* 24VDC2A
1127200000
TOS 60VUC* 230VAC1A
1127440000
TOZ 60VUC* 48VDC0.1A
1127080000
TOZ 60VUC* 24VDC2A
1127320000
TOZ 60VUC* 230VAC1A
1127570000
*AC/DC (UC)
Spare relay type SSS 60V…
120 V UC (AC/DC) +-10 %
5 mA / 3 mA
480 mVA / 360 mW
82 V @
65 V @
120 V UC (AC/DC)
TOS 120VUC* 48VDC0.1A
1126980000
TOS 120VUC* 24VDC2A
1127210000
TOS 120VUC* 230VAC1A
1127450000
TOZ 120VUC* 48VDC0.1A
1127090000
TOZ 120VUC* 24VDC2A
1127330000
TOZ 120VUC* 230VAC1A
1127580000
*AC/DC (UC)
Spare relay type SSS 60V…
230 V UC (AC/DC) +-10 %
3.5 mA / 2.9 mA
805 mVA / 670 mW
159 V @
99 V @
230 V UC (AC/DC)
TOS 230VUC* 48VDC0.1A
1126990000
TOS 230VUC* 24VDC2A
1127220000
TOS 230VUC* 230VAC1A
1127470000
TOZ 230VUC* 48VDC0.1A
1127100000
TOZ 230VUC* 24VDC2A
1127340000
TOZ 230VUC* 230VAC1A
1127590000
*AC/DC (UC)
Spare relay type SSS 60V…
120 V AC +- 10 %
7 mA / -
840 mVA
79 V @
65 V @
120 V AC RC
TOS 120VAC RC 48VDC0.1A
1127000000
TOS 120VAC RC 24VDC2A
1127230000
TOS 120VAC RC 230VAC1A
1127480000
TOZ 120VAC RC 48VDC0.1A
1127110000
TOZ 120VAC RC 24VDC2A
1127350000
TOZ 120VAC RC 230VAC1A
1127600000
Spare relay type SSS 60V…
230 V AC +-10 %
9 mA / -
2.1 VA
119 V
94 V
230 V AC RC
TOS 230VAC RC 48VDC0.1A
1127010000
TOS 230VAC RC 24VDC2A
1127240000
TOS 230VAC RC 230VAC1A
1127490000
TOZ 230VAC RC 48VDC0.1A
1127120000
TOZ 230VAC RC 24VDC2A
1127370000
TOZ 230VAC RC 230VAC1A
1127610000
Spare relay type SSS 60V…
TERMSERIES - Opto modules
Termseries
Solid State Relays
58
Termseries
Solid State Relays
0…33 V DC / 5A
12…275 V AC / 3A
• Multivoltageinput:24…230VUC(AC/DC)inoneunit
TERMSERIES - Opto modules
TERMSERIES - Opto modules
AC-Input + RC-Filter
=~
=
==
~
AC/DC-Input
DC-Input
A2
TOS
A1
A2
A1
14 11
14
NO
COM
11
12
NC
Load side
Output
Switching voltage
Continuous current
Peak reverse voltage
Forward voltage
Max. switching frequency at rated load
Short-circuit-proof / Protective circuit
General data
Status indicator / Free-wheel (Input)
Reverse polarity protection (Input)
Ambient temperature (operational)
Storage temperature
Humidity
Reference temperature technical data
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse voltage
Overvoltage category
Pollution degree
Clearage and creepage distance input / output
Total circuit to rail
Dimensions
Clamping range mm²
Height x length x width mm
Note
24 V 5 A DC 230 V 3 A DC
MOS-FET
TRIAC, zero cross switch
0…33 V DC 12…275 V AC
1 mA...5 A 50 mA...3 A
35 V 600 V
< 300 mV < 1.1 V
300 Hz 3 Hz
No / Free-wheel diode no / -
LED green / yes
yes
-40 °C to 60 °C
-40 °C to 85 °C
5 %...95 %, Tu=40 °C, no condensation
20 °C
300 V
6kV (1.2 / 50 µs)
III
2
>= 5.5 mm
4kVeff / 1 min
0.14…1.5 mm²
90 x 88 x 12.8
Control side
Rated control voltage
Input current
Input power
Making threshold
Dropout threshold
Ordering data
Screw connection
24 V DC 5A
230 V AC 3A
Tension clamp connection
24 V DC 5A
230 V AC 3A
24 V DC +- 20 % 24 V…230 V UC* +-10 %
8m +- 20 %
22 mA @ 24V DC / 4mA @ 230 V AC (+/- 10 %)
192 mW
530 mW @ 24 V DC / 930 mW @ 230 V AC
15V DC @ 11 V
11V DC @ 5 V
*AC/DC (UC)
24 V DC 24 V - 230 V UC*
TOS 24VDC / 24VDC 5A
1127630000
TOS 24VDC / 230VAC 3A
1127680000
TOZ 24VDC / 24VDC 5A
1127650000
TOZ 24VDC / 230VAC3A
1127700000
TOS 24-230VUC*/24VDC3A
1127640000
TOS 24-230VUC*/230VAC5A
1127690000
TOZ 24-230VUC*/24VDC3A
1127670000
TOZ 24-230VUC*/230VAC5A
1127710000
*AC/DC (UC)
Note Spare relay type SSR10…32 V DC/…
59
Empty socket 6.4 mm
Type / 1 CO, Screw connection Input voltage Order No.
TRS 5VDC 1CO empty 5 V DC (1) 1123220000
TRS 12VDC 1CO empty 12 V DC (2) 1123230000
TRS 24VDC 1CO empty 24 V DC (3) 1123240000
TRS 24VUC (AC/DC) 1CO empty 24 V AC / DC (3) 1123250000
TRS 48VUC (AC/DC) 1CO empty 48 V AC / DC (3) 1123270000
TRS 60VUC (AC/DC) 1CO empty 60 V AC / DC (4) 1123280000
TRS 120VUC (AC/DC) 1CO empty 120 V AC / DC (4) 1123290000
TRS 230VUC (AC/DC) 1CO empty 230 V AC / DC (4) 1123300000
TRS 120VAC RC 1CO empty 120 V AC (4) 1123310000
TRS 230VAC RC 1CO empty 230 V AC (4) 1123320000
TRS 24-230VUC (AC/DC) 1CO empty 24…230 V AC / DC (3) 1123330000
Type / 1 CO, Tension clamp connection
TRZ 5VDC 1CO empty 5 V DC (1) 1123340000
TRZ 12VDC 1CO empty 12 V DC (2) 1123350000
TRZ 24VDC 1CO empty 24 V DC (3) 1123370000
TRZ 24VUC (AC/DC) 1CO empty 24 V AC / DC (3) 1123380000
TRZ 48VUC (AC/DC) 1CO empty 48 V AC / DC (3) 1123390000
TRZ 60VUC (AC/DC) 1CO empty 60 V AC / DC (4) 1123400000
TRZ 120VUC (AC/DC) 1CO empty 120 V AC / DC (4) 1123410000
TRZ 230VUC (AC/DC) 1CO empty 230 V AC / DC (4) 1123420000
TRZ 120VAC RC 1CO empty 120 V AC (4) 1123430000
TRZ 230VAC RC 1CO empty 230 V AC (4) 1123440000
TRZ 24-230VUC (AC/DC) 1CO empty 24…230 V AC / DC (3) 1123450000
Useable with 1) RSS…005; SSS 5V… 2) RSS…012 3) RSS…024; SSS 24V… 4) RSS…060; SSS 60V…
Empty socket 12.8 mm
Type / 1 CO, Screw connection Input voltage Order No.
TOS 24VDC empty 24 V DC (1) 1127720000
TOS 24-230VUC (AC/DC) empty 24…230 V AC / DC (1) 1127730000
Type / 2 CO, Screw connection
TRS 5VDC 2CO empty 5 V DC (2) 1123950000
TRS 12VDC 2CO empty 12 V DC (3) 1123970000
TRS 24VDC 2CO empty 24 V DC (4) 1123980000
TRS 24VUC (AC/DC) 2CO empty 24 V AC / DC (4) 1123990000
TRS 48VUC (AC/DC) 2CO empty 48 V AC / DC (5) 1124000000
TRS 60VUC (AC/DC) 2CO empty 60 V AC / DC (6) 1124010000
TRS 120VUC (AC/DC) 2CO empty 120 V AC / DC (7) 1124020000
TRS 230VUC (AC/DC) 2CO empty 230 V AC / DC (7) 1124030000
TRS 120VAC RC 2CO empty 120 V AC (7) 1124040000
TRS 230VAC RC 2CO empty 230 V AC (7) 1124050000
TRS 24-230VUC (AC/DC) 2CO empty 24…230 V AC / DC (4) 1124070000
Type / 1 CO, Tension clamp connection
TOZ 24VDC empty 24 V DC (1) 1127740000
TOZ 24-230VUC (AC/DC) empty 24…230 V AC / DC (1) 1127750000
Type / 2 CO, Tension clamp connection
TRZ 5VDC 2CO empty 5 V DC (2) 1124080000
TRZ 12VDC 2CO empty 12 V DC (3) 1124090000
TRZ 24VDC 2CO empty 24 V DC (4) 1124100000
TRZ 24VUC (AC/DC) 2CO empty 24 V AC / DC (4) 1124110000
TRZ 48VUC (AC/DC) 2CO empty 48 V AC / DC (5) 1124120000
TRZ 60VUCC (AC/DC) 2CO empty 60 V AC / DC (6) 1124130000
TRZ 120VUC (AC/DC) 2CO empty 120 V AC / DC (7) 1124140000
TRZ 230VUC (AC/DC) 2CO empty 230 V AC / DC (7) 1124150000
TRZ 120VAC RC 2CO empty 120 V AC (7) 1124170000
TRZ 230VAC RC 2CO empty 230 V AC (7) 1124180000
TRZ 24-230VUC (AC/DC) 2CO empty 24…230 V AC / DC (4) 1124190000
Useable with 1) RCL31.024; SSR 10…32VDC/... 2) RCL42.005 3) RCL42.012 4) RCL42.024 5) RCL42.048 6) RCL42.060 7) RCL42.110
TERMSERIES - Opto modules
TERMSERIES - Opto modules
60
TERMSERIES - Opto modules
TERMSERIES - Opto modules
RSS Relays
Technical data RSS113… RSS112…
Type of contact / Number of contacts 1 CO contact 1 CO contact
Contact material Silver/Nickel (AgNi) AgNi Gold Plated (5uAu) (3)
Max. switching voltage / current 250 V / 6A (1) 250 V / 6A (1)
Min. switching voltage / current 5 V / 100 mA (2) 1 V / 1 mA
Min. mechanical lifetime 5x106 (1) 5x106 (1)
Min. mechanical lifetime NO: 5x104; NC: 3x104 (1) NO: 5x104; NC: 3x104 (1)
Max. switch-on / switch-off delay 8 / 4 ms 8 / 4 ms
Ambient temperature (operational) -40…+85 °C -40…+85 °C
Making / Dropout voltage coil Type. 70 % / 5 % UNENN Type. 70 % / 5 % UNENN
Note 1) At resistive load
2) 10 V / 10 mA; 24 V / 1 mA
3) Gold (Au) - plate operate up to 0.25 W
Coil data Rated voltage / current Order No. Order No.
RSS…005 5 V DC / 34 mA 4061580000 1174540000
RSS…012 12 V DC / 14 mA 4061610000 1220670000
RSS…024 24 V DC / 7 mA 4060120000 4061590000
RSS…060 60 V DC / 3 mA 4061630000 4061600000
RCL Relays
Technical data RCL424… RCL425…
Type of contact / Number of contacts 2 CO contact 2 CO contact
Contact material Silver/Nickel (AgNi) AgNi Gold Plated (5uAu) (3)
Max. switching voltage / current 250 V / 8A (1) 250 V / 8A (1)
Min. switching voltage / current 5 V / 100 mA (2) 1 V / 1 mA
Min. mechanical lifetime 30x106 (1) 30x106 (1)
Min. mechanical lifetime 10x103 (1) 10x103 (1)
Max. switch-on / switch-off delay 8 / 6 ms 8 / 6 ms
Ambient temperature (operational) -40…+85 °C -40…+85 °C
Making / Dropout voltage coil Type. 70 % / 10 % UNENN Type. 70 % / 10 % UNENN
Note 1) At resistive load
2) 10 V / 10 mA; 24 V / 1 mA
3) Gold (Au) - plate operate up to 0.25 W
Coil data Rated voltage / current Rated current Order No. Order No.
RCL…005 5 V DC / 80 mA 80 mA 8693790000 1174490000
RCL…012 12 V DC / 33 mA 33 mA 4058560000 4074580000
RCL…024 24 V DC / 16 mA 16 mA 4058570000 4058580000
RCL…048 48 V DC / 8 mA 8 mA 4058750000 1201230000
RCL…060 60 V DC / 6 mA 6 mA 4058760000 1201260000
RCL…110 110 V DC / 3 mA 3 mA 4058590000 8828370000
61
TERMSERIES - Opto modules
Small Solid-State Relays
Technical data SSS…24 V 0.1 A DC SSS…24 V 2 A DC SSS…230 V 1 A AC
Output Bipolar transistor MOS-FET Triac
Switching voltage 0…48 V DC 0…24 V DC 24…240 V AC
Continuous current 100 mA 2 A 1 A
Peak reverse voltage 54 V 33 V 600 V
Forward voltage < 1 V DC < 120 mV < 1 V
Test voltage input /output 2.5 kV 2.5 kV 3.75 kV
Ambient temperature (operational)
-20…+60 °C -20…+60 °C -20…+60 °C
Storage temperature -40…+70 °C -40…+70 °C -40…+70 °C
Note
Input Rated voltage / current Order No. Order No. Order No.
SSS 5 V… 2.5…6 V DC / 4 mA 4064320000 – –
SSS 24 V… 16…30 V DC / 7 mA 4601180000 – –
SSS 60 V... 52…72 V DC / 3 mA 4061230000 – –
SSS 5 V… 2.5…6 V DC / 9 mA – 4064310000 –
SSS 24 V… 18…30 V DC / 7 mA – 4601190000 –
SSS 60 V... 40…72 V DC / 3 mA – 4601200000 –
SSS 5 V… 2.5…6 V DC / 15 mA – – 1132260000
SSS 24 V… 18…30 V DC / 7 mA – – 4061210000
SSS 60 V... 40…72 V DC / 3 mA – – 4061220000
Solid-State Relays
Technical data SSR…/0-35 V DC 5A SSR…/12-275 V AC 3A
Output MOS-FET TRIAC, zero cross switch
Switching voltage 0…33 V DC 12…275 V AC
Continuous current 1mA...5 A 50mA...3 A
Peak reverse voltage 35 V 600 V
Forward voltage < 300 mV < 1.1 V
Test voltage input /output 2.5 kV
Ambient temperature (operational)
-20…+80 °C
Storage temperature -40…+100 °C
Note
Coil data Rated voltage / current Order No. Order No.
SSR10…32 V DC/… 10…32 V/3…13 mA 1132310000 1132290000
TERMSERIES - Opto modules
62
TERMSERIES - Optos Accessories
TERMSERIES - Opto Accessories
Technical data
Conductor Screw connection Tension clamp connection
1 conductor
Solid H07V-U mm² 0.14…2.5 0.14…1.5
Stranded H07V-K mm² 0.14…1.5 0.14…1.5
… with wire end ferrule mm² 0.25…1.5 0.14…1.5
… with wire end ferrule with plastic collar mm² 0.25…1.5 0.14…1.5
2 conductor with same size
Solid H07V-U mm² 0.5…1.0 0.5…1.0
Stranded H07V-K mm² 0.5…1.0 0.5…1.0
… with twin wire end ferrule H…D ZH mm² 0.5…1.5 0.5…1.0
Clamping range AWG…/1 AWG 26…14 26…16
Clamping range AWG…/7 AWG 26…16 26…16
Clamping range AWG…/19 AWG 26…16 26…16
Plug gauge to IEC 60947-1 Size A1 / B1 A1 / B1
General data
Nominal torque Nm 0.4
Stripping length mm 8 8
Continuous current ZQV 1.5N/R6.4 A 17.5; UL: 10 17.5; UL: 10
No. Contact durability relay / ZQV 10 10
Note
Dimensions
Tension clamp connection Screw connection
Pluggable cross connection
Type No. of poles / pitch Order No.
ZQV 1.5N/R6.4/2 GE 2 / 6.4 1193670000
ZQV 1.5N/R6.4/10 GE 10 / 6.4 1193680000
ZQV 1.5N/R6.4/19 GE 19 / 6.4 1193690000
ZQV 1.5N/R12.8/10 GE 10 / 12.8 1193700000
Supply terminal
Type Connection technology Order No.
TXS SUPPLY Screw connection 1240780000
TXZ SUPPLY Tension clamp connection 1240790000
Additional accessory
Type / Isolation plate Order No.
TW TXS/TXZ R3.2 Isolation plate 3.2 mm pitch 1240800000
Marker
WS 10/6 MC Middle 10x6 mm 1818400000
Screw driver
SDK PH0 Only Screw connection 9008470000
SD 0.6 x 3.5 x 100 9008330000
End bracket
WEW35/2 SW 1061210000
88 mm
90 mm
6.4 mm 12.8 mm
88 mm
90 mm
6.4 mm 12.8 mm
63
www.weidmuller.com.au
Weidmullers comprehensive range of Optocouplers provides customers with a solution for
all applications. All products are designed and constructed with a focus of high quality,
market leading features and space saving design.
Optocouplers provide a compact, electronic alternative to electro-mechanical relays.
The no-wear semiconductor switch and comprehensive protective circuitry ensure a long
product life and reliable switching operation that will increase the reliability and service
life of your electrical application.
IN TERMS OF LIFE
GO WITH AN OPTO
AS SMALL AS A TERMINAL...
WEIDMULLER TERMOPTO & MICROOPTO
64
TERMOPTO - Opto modules
TERMOPTO - Opto modules
TERMOPTO output variants DC 500 mA
5 V DC
12...220 DC
24...230 V AC
13
14 A1
A2
13
14 A1
A2
13
14 A1
A2
Load side
Solid-state type
Nominal switching voltage / current
Voltage drop at max. load
Leakage current
Short-circuit-proof / Protective circuit
Switch-off delay / Switch-on delay
Continuous current
Load category
General data
Ambient temperature (operational)
Storage temperature
Flammability class UL 94
Humidity
Approvals
Standards
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Dimensions
Clamping range (nominal / min. / max.) mm²
Length x width x height mm
Note
Transistor
5...48 V DC / 500 mA
< 1 V
< 10 µA
No / Diode
< 200 µs / < 20 µs
500 mA
DC1
-20 °C...+60 °C
-40 °C...+80 °C
V-0
5...95 % rel. humidity
Tu = 40°C, no condensation
cULus; CE
EN 50178, IEC 62314, UL508
300 V
4 kV
> 3 mm
III
2
Screw connection PUSH IN connection
2.5 / 0.5 / 4 1.5 / 0.5 / 2.5
74.5 / 6.1 / 55 79.5 / 6.1 / 55
e.g. electrical isolation
Control
Power supply
24 V DC Sensor
Conveyor belt
Power supply
24 V DC
The TERMOPTO opto module is used in industrial
applications in which electrical isolation and signal
conditioning without switching amplification is sufficient.
The compact design in terminal-block format saves space
on the rail and offers the option of a pluggable cross-
connection.
The choice between 10 input voltages and 3 output
voltages as well as between screw or PUSH IN connection
technology gives 60 variations for different applications.
The integrated protective circuit ensures sufficient protection
in applications with resistive as well as slightly inductive and
capacitive loads. For purely inductive, capacitive or
comparable loads with high switch-on and switch-off peaks,
such as solenoid valves or filament lamps, ensure that the
module is dimensioned appropriate or an additional
safeguard is used.
Applications
65
TERMOPTO - Opto modules
TERMOPTO - Opto modules
Ordering data
Control side
Rated control voltage
Power rating
making voltage
Dropout voltage
Input frequency
Status indicator
Protective circuit
Ordering data
Screw connection Type
PUSH IN connection Type
Note
5 V DC
< 40 mW
≥ 4 V DC
≤ 2 V DC
< 200 Hz
Green LED
Varistor, reverse polarity
protection
5 V DC
8950900000
TOS 5VDC/48VDC 0,5A
8950960000
TOP 5VDC/48VDC 0,5A
Order No.
Order No.
12 V DC
< 95 mW
≥ 9.6 V DC
≤ 4.8 V DC
< 200 Hz
Green LED
Varistor, reverse polarity
protection
12 V DC
8950910000
TOS 12VDC/48VDC 0,5A
8950970000
TOP 12VDC/48VDC 0,5A
24 V DC
≤ 170 mW
≥ 19.2 V DC
≤ 9.6 V DC
< 200 Hz
Green LED
Varistor, reverse polarity
protection
24 V DC
8950920000
TOS 24VDC/48VDC 0,5A
8950980000
TOP 24VDC/48VDC 0,5A
48...60 V DC
≤ 200 mW
≥ 38.4 V DC
≤ 19.2 V DC
< 200 Hz
Green LED
Varistor, reverse polarity
protection
48...60 V DC
8950930000
TOS 48-60VDC/48VDC 0,5A
8950990000
TOP 48-60VDC/48VDC 0,5A
110 V DC
≤ 280 mW
≥ 88 V DC
≤ 44 V DC
< 200 Hz
Green LED
Varistor, reverse polarity
protection
110 V DC
8950940000
TOS 110VDC/48VDC 0,5A
8951000000
TOP 110VDC/48VDC 0,5A
Ordering data
Control side
Rated control voltage
Power rating
making voltage
Dropout voltage
Input frequency
Status indicator
Protective circuit
Ordering data
Screw connection Type
PUSH IN connection Type
Note
220 V DC
≤ 360 mW
≥ 187 V DC
≤ 93.5 V DC
< 200 Hz
Green LED
Varistor, reverse polarity
protection
220 V DC
8950950000
TOS 220VDC/48VDC 0,5A
8951010000
TOP 220VDC/48VDC 0,5A
Order No.
Order No.
24 V AC
< 0,18 VA
≥ 21.6 V AC
≤ 9.6 V AC
< 10 Hz
Green LED
Varistor
24 V AC
8951020000
TOS 24VAC/48VDC 0,5A
8951060000
TOP 24VAC/48VDC 0,5A
48...60 V AC
≤ 0,2 VA
≥ 38.4 V AC
≤ 19.2 V AC
< 10 Hz
Green LED
Varistor
48...60 V AC
8951030000
TOS 48-60VAC/48VDC 0,5A
8951070000
TOP 48-60VAC/48VDC 0,5A
120 V AC
≤ 0,3 VA
≥ 102 V AC
≤ 48 V AC
< 10 Hz
Green LED
Varistor
120 V AC
8951040000
TOS 120VAC/48VDC 0,5A
8951080000
TOP 120VAC/48VDC 0,5A
230 V AC
≤ 0,4 VA
≥ 207 V AC
≤ 69 V AC
< 10 Hz
Green LED
Varistor
230 V AC
8951050000
TOS 230VAC/48VDC 0,5A
8951090000
TOP 230VAC/48VDC 0,5A
TERMOPTO output variants DC 500 mA
66
TERMOPTO - Opto modules
TERMOPTO - Opto modules
TERMOPTO output variants DC 4 A
5 V DC
12...220 DC
24...230 V AC
13
14 A1
A2
13
14 A1
A2
13
14 A1
A2
Load side
Solid-state type
Nominal switching voltage / current
Voltage drop at max. load
Leakage current
Short-circuit-proof / Protective circuit
Switch-off delay / Switch-on delay
Continuous current
Load category
General data
Ambient temperature (operational)
Storage temperature
Flammability class UL 94
Humidity
Approvals
Standards
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Dimensions
Clamping range (nominal / min. / max.) mm²
Length x width x height mm
Note
Transistor
3...33 V DC / 4 A
< 1 V
< 10 µA
No / Diode
< 200 µs / < 20 µs
4 A
DC1
-20 °C...+60 °C
-40 °C...+80 °C
V-0
5...95 % rel. humidity
Tu = 40°C, no condensation
CE; cULus
EN 50178, IEC 62314, UL508
300 V
4 kV
> 3 mm
III
2
Screw connection PUSH IN connection
2.5 / 0.5 / 4 1.5 / 0.5 / 2.5
74.5 / 6.1 / 55 79.5 / 6.1 / 55
Ordering data
Control side
Rated control voltage
Power rating
making voltage
Dropout voltage
Input frequency
Status indicator
Protective circuit
Ordering data
Screw connection Type
PUSH IN connection Type
Note
Order No.
Order No.
24 V DC
≤ 170 mW
≥ 16.8 V DC
≤ 9.6 V DC
10 Hz
Green LED
Varistor, reverse polarity protection
24 V DC
1275100000
TOS 24VDC/24VDC 4A
1254880000
TOP 24VDC/24VDC 4A
67
MICROOPTO – Opto modules
MICROOPTO – Opto modules
For switching valves up to 24 V DC
10 A
•Only6mmwidth
•Pluggablecross-connection
•InstallationonTS35
•Statusindicatoranderrormessagecontactin
case of failures on the output
Technical data
Control side
Rated control voltage
Power rating
making voltage
Dropout voltage
Input frequency
Status indicator
Protective circuit
Load side
Solid-state type
Rated switching voltage
Rated switching current
Voltage drop at max. load
Leakage current
Short-circuit-proof / Protective circuit
Switch-on delay / Switch-off delay
Continuous current
Pulse loading, max. current
Load category
General data
Alarm contact
Ambient temperature
Storage temperature
Flammability class UL 94
Humidity
Approvals
Standards
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Dimensions
Clamping range (nominal / min. / max.) mm²
Length x width x height mm
Note
Ordering data
Connection system
Screw connection
Note
24 V DC / 5-33 V DC 10 A
A2 13
14
A1
24 23
A2 13
14
A1
24 23
24 V DC ±20 %
400 mW
> 18 V
< 13 V
50 Hz
Error LED red; Status LED green
Varistor, reverse polarity protection
POWER-MOS-FET transistor
5...33 V DC
10 A
approx. 100 mV
< 1 mA
Yes (conditional 4h / current limiting < 200 A) / Varistor,
Current sensor
typical. 250 µs / typical. 700 µs
10 A
LC A
5...48 V DC / 0.1 A
-25 °C...+60 °C
-40 °C...+80 °C
V-0
40°C / 93% rel. humidity, no condensation
GL; GOSTME25; UL; CE
EN 50178, GL 2003-Vl-Abs. 9, IEC 62314, UL508
300 V
4 kV (1.2 / 50 µs)
> 3 mm
III
2
Screw connection
2.5 / 0.5 / 4
90 / 6.1 / 98
Suppressor circuitry for inductive loads, 10-cm installation clearance to
inductive switching devices
Type Qty. Order No.
MOS 24VDC/5-33VDC 10A 1 8937940000
Ambient temperature [°C]
Load current [A]
e.g. pneumatic valve
Valve
bar
Control
Power supply
Auxiliary contact for
error messages
The MICROOPTO SOLENOID solid-state relay
is used especially as switching amplifier for
actuators up to 24 V DC and 10 A with inductive
loads such as solenoid valves and contactors.
A potential-free signalling contact transmits
errors, such as short circuit, to the controller.
The MICROOPTO SOLENOID solid-state relay
is short-circuit-proof and protected against
power-related transients and voltage peaks by
extensive protective circuits. The closed housing
also offers a high level of protection against
contact.
0
2
4
6
8
10
12
0102030405060708090
MICROOPTO 10 A
Switching frequency 50 Hz
Switching frequency 1 Hz
MICROOPTO – Opto modules
68
MICROOPTO – Opto modules
For direct connection of actuators
up to 24 V DC, 2 A
•Only6mmwidth
•Plug-incross-connection
•PEconnectiondirecttomountingrail
•Statusdisplaywhenerrorinoutput
Technical data
Control side
Rated control voltage
Power rating
making voltage
Dropout voltage
Input frequency
Protective circuit
Load side
Solid-state type
Rated switching voltage
Rated switching current
Voltage drop at max. load
Leakage current
Short-circuit-proof / Protective circuit
Switch-on delay / Switch-off delay
Continuous current
Pulse loading, max. current
Load category
Status indicator
General data
Ambient temperature
Storage temperature
Flammability class UL 94
Humidity
Approvals
Standards
Insulation coordination (EN 50 178)
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Overvoltage category
Pollution degree
Dimensions
Clamping range (nominal / min. / max.) mm²
Length x width x height mm
Note
Ordering data
Connection system
Screw connection
Note
8...30 V DC 2 A
+24 V DC 0 V
A 2
+24 V DC 0 V
A 2
24 V DC ±20 %
0.1...2 W
> 13.8 V
< 13.6 V
100 Hz
Varistor, reverse polarity protection
Intelligent POWER MOS-FET
8...30 V DC
2 A @ 55 °C
≤ 50 mV
< 50 µA
Yes (12 h) / Varistor
0.1 ms / < 0.5 ms
2 A
LC A
Error indication LED red; status LED green
-20…s. Derating curve
-40 °C...+80 °C
V-0
5...95 % RH
Tu = 55 °C, no condensation
GL; UL; CE
EN 50178, GL 2003-Vl-Abs. 9, IEC 62314, UL508
300 V
4 kV (1.2 / 50 µs)
> 3 mm
III
2
Screw connection
2.5 / 0.5 / 4
90 / 6.1 / 98
Type Qty. Order No.
MOS 24VDC/8-30VDC 2A 1 8937970000
The solid-state relay MICROOPTO ACTOR has
been especially designed as a switching amplifier
for actuators up to 24 V DC and 2A with
inductive
loads such as solenoid valves and contactors.
3-wire actuators can be connected directly to
the
module.
This is short-circuit proof and protected against
application-related transients and spikes by exten
-
sive protective circuitry.
Example: pneumatic valve
Valve
bar
Control
Power
supply
PE
PE
0
1
2
3
4
5
6
0102030405060708090
Ambient temperature [°C]
Load current [A]
MICROOPTO 2 A
Switching frequency 100 Hz
Switching frequency 1 Hz
MICROOPTO – Opto modules
69
TERMOPTO / MICROOPTO – Optos Accessories
Accessories General data – TERMOPTO / MICROOPTO
Plug-in cross-connection
Type No. of poles Order No.
yellow
ZQV 4N / 2 GE 2 1758250000
ZQV 4N / 3 GE 3 1762630000
ZQV 4N / 4 GE 4 1762620000
ZQV 4N / 10 GE 10 1758260000
ZQV 4N / 20 GE 20 1909020000
red
ZQV 4N / 2 RT 2 1793950000
ZQV 4N / 3 RT 3 1793980000
ZQV 4N / 4 RT 4 1794010000
ZQV 4N / 10 RT 10 1794040000
ZQV 4N / 20 RT 20 1909150000
blue
ZQV 4N / 2 BL 2 1793960000
ZQV 4N / 3 BL 3 1793990000
ZQV 4N / 4 BL 4 1794020000
ZQV 4N / 10 BL 10 1794050000
ZQV 4N / 20 BL 20 1909100000
black
ZQV 4N / 2 SW 2 1793970000
ZQV 4N / 3 SW 3 1794000000
ZQV 4N / 4 SW 4 1794030000
ZQV 4N / 10 SW 10 1794060000
ZQV 4N / 20 SW 20 1909120000
Other accessories
Type Order No.
Supply terminals
MOS SUPPLY 8973460000
MOS FEED THROUGH 8973450000
Markers
WS 12/6 12 x 6 mm 1609900000
Labels, Lasermark
LM MT 300 15/6 ge
484 labels/sheet
1686360000
Screwdriver
SD 0.6 x 3.5 x 100 9008330000
Cross-connector for plugging into the clamping point
QB 75/6.2/15 0535200000
Coloured insulating profile for QB
ISPF QB75 black 0526700000
ISPF QB75 blue 0526780000
ISPF QB75 red 0526760000
End bracket
WEW 35/2 1061210000
Technical data
Screw-
Conductor connection
Solid H07V-U mm20.5 … 4.0
Stranded H07V-K mm20.5 … 2.5
“f” with wire end ferrules to DIN 46228-1 mm20.5 … 1.5
“f” with wire end ferrules with plastic collar mm20.5 … 1.5
Max. clamping range mm2 0.13 … 4.0
Plug gauge to IEC 60947-1 size A 3
General technical data
Nominal torque Nm 0.6
Continuous current for 2-pole cross-connection A 10
Continuous current for multi-pole cross-connection A 10
Stripping length mm 7
Ingress protection class IP 20
Housing material Wemid
UL 94 flammability rating V-0
Nominal current A 6
Nominal voltage V 250
Dimensions: TERMOPTO Dimensions: MICROOPTO
55 mm
55 mm 6.1 mm
6.1 mm
79.5 mm
74.5 mm
PUSH IN connection
Screw connection
Screw connection
90
88
97.8
6.1
Optos Accessories
70
Circuit diagram Mounting
Installation
out 24V
0V
V+
0V
Output
MC5O
Load
Input
+
_
Power
Supply
5-34VDC
General
Warning: to be installed/maintained by qualified personnel as per
instructions, or module safety may be compromised.
Design for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Location
To be installed in a metal enclosure.
Ordering Information
Ordering Information
Solenoid Driver 5-34 V, 10A 7901690001
Accessories
End Plate AP 7940005681
End Brackets EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
Technical Data
Input
Input Voltage Range 10.5 to 28Vdc
Operating Current 5.0mA @ 24Vdc
Output
Type High Side MOSFET Switch
Output Resistance (on state) Less than 10mΩ
Nominal Switching Voltage 5 to 34Vdc
Maximum Continuous Current 10A inductive
Use with Fuse/Circuit Breaker (recommended) 15A (65V) Slow Blow, breaking capacity 150A min
Operate time (at nom. voltage) 1mS approx.
Release time (at nom. voltage) 1mS max.
Max. operating speed (50% mark space ratio) 100Hz (6000 operations per minute)
Isolation
Surge Strength 4000V
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
EMC / LVD EN50081-1, EN50082-1 / EN61010-1
Note: It is recommended that a diode be fitted across
output when correcting inductive loads
MC50 Solenoid Driver 10A
MC50 - Solenoid Driver 10A
•10A @ 5-34Vdc inductive switch
•High Side High Current Power Switch
•Ultra compact 6mm wide ‘Combifoot’ housing suits
TS32 & TS35
•4000Vrms isolation
•LED relay state indication
•Reverse polarity diode protection
•Input diode protection
•Bark EMF protected
out 24V
0V
V+
0V
Output Input
MC5R Relays
71
Installation
General
Warning: to be installed/maintained by qualified personnel as per
instructions, or module safety may be compromised.
Design for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Location
To be installed in a metal enclosure.
Ordering Information
Ordering Information
MC50 Solenoid Driver 1A 200 VDC 7901490001
Accessories
End Plate AP 7940005681
End Brackets EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
Technical Data
Input
Input Voltage Range 10.5 to 28Vdc
Operating Current 11.5mA @ 24Vdc
Output
Type MOSFET Switch
Output Resistance (on state) 0.34 Ω
Nominal Switching Voltage 5 to 200Vdc
Maximum Continuous Current 1A resistive or inductive
Operate time (at nom. voltage) 1mS approx.
Release time (at nom. voltage) 0.1mS max.
Max. operating speed (50% mark space ratio) 1Hz (60 operations per minute)
Isolation
Surge Strength 2500V
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
Circuit diagram Mounting
MC50 - Solenoid Driver 1A up to 200Vdc
•1A@5-200Vdc resistive & inductive switch
•High Voltage DC Switch
•Ultra compact 6mm wide ‘Combifoot’ housing suits
TS32 & TS35
•2500V isolation
•LED relay state indication
•Input diode protection
MC50 Solenoid Driver 1A up to 200Vdc
MC5R Relays
72
Installation
General
Warning: to be installed/maintained by qualified personnel as per
instructions, or module safety may be compromised.
Design for IEC664 Installation Category II use.
Cleaning
Wipe only with a damp cloth (remove power before cleaning).
Location
To be installed in a metal enclosure.
Ordering Information
Ordering Information
MC50 12/24 VDC 7906270000
MC50 24/48 VDC 7906280000
MC50 24 VDC / 110 VAC 7906290000
MC50 5/12 VDC 7906300000
Accessories
End Plate AP 7940005681
End Brackets EW(TS35)
EWK(TS32)
0383560000
0206160000
Cross Connection Parts
Insulated 2 pole
3 pole
4 pole
0482700000
0482800000
0482900000
Uninsulated 75 pole straight
75 pole angled
0535200000
0526400000
Mounting rail
TS32
TS35 x 7.5
TS35 x 15
0122800000
0383400000
0236400000
Technical Data
Input A Nominal Voltage
(Input B nominal Voltage)
12Vdc
(48Vdc)
24Vdc
(48Vdc)
110Vac/dc
(24Vdc)
5Vdc
(12Vdc)
Nominal Operating Current (typical) 5mA
(5mA)
5mA
(5mA)
5mA
(4mA)
6mA
(7mA)
Input voltage variations ±10% (±10%)
Protection Reverse polarity diode on DC inputs only
Output
Type Open Collector NPN Transistor
Maximum Switching Current 250mA @ 60Vdc
Voltage Drop at max. load current <2V
Switching Times: on A (B) 20µS
(125µS)
40µS
(700µS)
10mS
(30µS)
20µS
(25µS)
Switching Times: off A (B) 1.5mS
(1.5mS)
30mS
(30mS)
20mS
(500µS)
250µS
(250µS)
Max. operating speed (50% mark space ratio) 100Hz
(100Hz)
20Hz
(20Hz)
10Hz
(100Hz)
100Hz
(100Hz)
Isolation
Surge Strength 4000V (1 min)
General
Terminal width 6mm
Width across rail 76mm
Height on rail TS32 68mm
TS35 x 7.5 63mm
TS35 x 15 71mm
Operating temperature range -40°C to +60°C
Conductor size Solid 0.5 to 4.0mm2
Flexible 0.5 to 2.5mm2
Circuit diagram
MC50 - Dual Voltage
•Dual Input Voltage Solid State Relay
•Ultra compact 6mm wide ‘Combifoot’ housing suits
TS32 & TS35
•4000Vrms isolation
•LED relay state indication
•Input diode protection
B B B
DC 24Vdc (110Vac/dc) 12Vdc/5Vdc
* no LED indication
*
A A A
_ _ _
0V 0V 0V
+ + +
MC50 Dual Voltage
MC5R Relays
73
Notes
74
Weidmuller Power Solutions
Weidmuller is a leading manufacturer of Power Electrical and Electronic products that
are designed, tested and certified to the most stringent Australian and International
standards. The extensive ‘Power Products’ portfolio encompasses, devices, modules
and accessories essential to the requirements of Electrical Engineers, Electricians and
Technicians.
Weidmuller ‘Power Products’ are used worldwide in switchboards, machines and vehicles
where ever electrical power is terminated, switched, conditioned or transformed. With
over sixty years of experience and our strict attention to quality, reliability and efficient
functionality Weidmuller is the sensible choice for all your power electrical and electronic
needs.
• Terminals
• Markers
• Industrial Multipole Connectors
• Power Supplies
• Relays & Optocouplers
• Surge Protection
• Enclosures
• Cable Glands
• Tools
• Accessories
Power Product
Distributors
NSW: Sydney
Ramelec (NSW) Pty Ltd
Phone: (02) 9684 6700
Fax: (02) 9684 6722
nsw@ramelec.com.au
NSW: North & Central Coast
PDC Group (Aust) Pty Ltd
Phone: (02) 4952 5200
Fax: (02) 4952 9337
pdce@pdcgroup.com.au
NSW: South & Wollongong
Excell Control Pty Ltd
Phone: (02) 4272 1922
Fax: (02) 4272 2957
sales@excellcontrol.com.au
QLD
Ramelec (QLD) Pty Ltd
Phone: (07) 3899 1322
Fax: (07) 3899 1422
qld@ramelec.com.au
VIC
Quador (Aust) Pty Ltd
Phone: (03) 9874 7388
Fax: (03) 9873 5134
sales@quador.com.au
TAS
TAS Electrical & Engineering Supplies
Phone: (03) 6273 9855
Fax: (03) 6273 9866
info@taseande.com.au
SA
Ramelec (SA) Pty Ltd
Phone: (08) 8374 2100
Fax: (08) 8299 0770
sales@ramelec.com.au
NT
Ramelec (NT) Pty Ltd
Phone: 1300 309 303
Fax: 1300 309 308
sales@ramelec.com.au
WA
JTDay Pty Ltd
Phone: (08) 9303 2248
Fax: (08) 9303 2446
enquiries@jtday.com.au
NEW ZEALAND
Cuthbert Stewart Limited
Phone: +64 (0) 4 568 6156
Fax: +64 (0) 4 568 6056
csl@cuthbertstewart.co.nz
Weidmuller Pty Ltd (Head Office)
43 Huntingwood Drive, Huntingwood
NSW 2148
Phone +61 (0) 2 9671 9999
Fax +61 (0) 2 9671 9900
Email info@weidmuller.com.au
www.weidmuller.com.au
Order Number:
7940045798
Or contact your local reseller or wholesaler:
