VS-ST780CL Series www.vishay.com Vishay Semiconductors Phase Control Thyristors (Hockey PUK Version), 1350 A FEATURES * Center amplifying gate * Metal case with ceramic insulator * International standard case B-PUK (TO-200AC) * Designed and qualified for industrial level * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS * DC motor controls B-PUK (TO-200AC) * Controlled DC power supplies PRIMARY CHARACTERISTICS * AC controllers IT(AV) 1350 A VDRM/VRRM 400 V, 600 V VTM 1.31 V IGT 100 mA TJ -40 C to +125 C Package B-PUK (TO-200AC) Circuit configuration Single SCR MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IT(AV) Ths IT(RMS) Ths ITSM I2t A 55 C 2700 A 25 C 24 400 60 Hz 25 600 50 Hz 2986 60 Hz 2726 Typical TJ UNITS 1350 50 Hz VDRM/VRRM tq VALUES A kA2s 400 to 600 V 150 s -40 to 125 C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VS-ST780C..L VOLTAGE CODE VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 04 400 500 06 600 700 IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 80 Revision: 28-Sep-17 Document Number: 94415 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ST780CL Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Maximum average on-state current at heatsink temperature Maximum RMS on-state current IT(AV) IT(RMS) TEST CONDITIONS 180 conduction, half sine wave double side (single side) cooled DC at 25 C heatsink temperature double side cooled t = 10 ms Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing I2t No voltage reapplied 1350 (500) A 55 (85) C 2700 25 600 Sinusoidal half wave, initial TJ = TJ maximum 100 % VRRM reapplied t = 0.1 to 10 ms, no voltage reapplied 21 500 2986 2726 2112 29 860 VT(TO)1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.80 VT(TO)2 (I > x IT(AV)), TJ = TJ maximum 0.90 Low level value of on-state slope resistance rt1 (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum 0.14 High level value of on-state slope resistance rt2 (I > x IT(AV)), TJ = TJ maximum 0.13 Ipk = 3600 A, TJ = TJ maximum, tp = 10 ms sine pulse 1.31 VTM IH Typical latching current IL TJ = 25 C, anode supply 12 V resistive load kA2s 1928 Low level value of threshold voltage Maximum on-state voltage A 20 550 High level value of threshold voltage Maximum holding current UNITS 24 400 No voltage reapplied 100 % VRRM reapplied VALUES 600 1000 kA2s V m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current SYMBOL dI/dt TEST CONDITIONS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM VALUES UNITS 1000 A/s Typical delay time td Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C 1.0 Typical turn-off time tq ITM = 750 A, TJ = TJ maximum, dI/dt = 60 A/s, VR = 50 V, dV/dt = 20 V/s, gate 0 V 100 , tp = 500 s 150 SYMBOL TEST CONDITIONS VALUES UNITS s BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage dV/dt TJ = TJ maximum linear to 80 % rated VDRM 500 V/s Maximum peak reverse and off-state leakage current IRRM, IDRM TJ = TJ maximum, rated VDRM/VRRM applied 80 mA Revision: 28-Sep-17 Document Number: 94415 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ST780CL Series www.vishay.com Vishay Semiconductors TRIGGERING PARAMETER SYMBOL PGM Maximum peak gate power PG(AV) Maximum average gate power Maximum peak positive gate current IGM Maximum peak positive gate voltage + VGM Maximum peak negative gate voltage - VGM VALUES TEST CONDITIONS TJ = TJ maximum, tp 5 ms 10.0 TJ = TJ maximum, f = 50 Hz, d% = 50 2.0 TJ = TJ maximum, tp 5 ms 3.0 TJ = TJ maximum, tp 5 ms TJ = 125 C TJ = -40 C VGT DC gate voltage required to trigger TJ = 25 C TJ = 125 C DC gate current not to trigger IGD DC gate voltage not to trigger VGD TJ = TJ maximum A V 5.0 Maximum required gate trigger/current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied TJ = 25 C Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode UNITS W 20 TJ = -40 C IGT DC gate current required to trigger MAX. TYP. 200 - 100 200 50 - 2.5 - 1.8 3.0 1.1 - mA V 10 mA 0.25 V VALUES UNITS THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum operating junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink Maximum thermal resistance, case to heatsink TEST CONDITIONS TJ -40 to 125 TStg -40 to 150 RthJ-hs RthC-hs DC operation single side cooled 0.073 DC operation double side cooled 0.031 DC operation single side cooled 0.011 DC operation double side cooled 0.006 Mounting force, 10 % Approximate weight Case style See dimensions - link at the end of datasheet C K/W 14 700 (1500) N (kg) 255 g B-PUK (TO-200AC) RthJ-hs CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION SINGLE SIDE SINGLE SIDE DOUBLE SIDE DOUBLE SIDE 180 0.009 0.009 0.006 0.006 120 0.011 0.011 0.011 0.011 90 0.014 0.014 0.015 0.015 60 0.020 0.020 0.021 0.021 30 0.036 0.036 0.036 0.036 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note * The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC Revision: 28-Sep-17 Document Number: 94415 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ST780CL Series 130 Vishay Semiconductors ST780C..L Series (Single Side Cooled) R thJ-hs (DC) = 0.073 K/ W 120 110 100 90 Conduction Angle 80 30 70 60 90 60 120 180 50 40 0 200 400 600 800 1000 Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) www.vishay.com 130 ST780C..L Series (Double Side Cooled) RthJ-hs (DC) = 0.031 K/ W 120 110 100 90 80 Conduction Period 70 30 60 60 50 90 120 40 180 30 DC 20 0 Fig. 4 - Current Ratings Characteristics ST780C..L Series (Single Side Cooled) R thJ-hs (DC) = 0.073 K/ W 110 100 90 Conduction Period 80 70 60 30 50 60 40 90 120 30 180 20 0 200 400 600 DC 800 1000 1200 1400 Maximum Average On-state Power Loss (W) Maximum Allowable Heatsink Temperature (C) Fig. 1 - Current Ratings Characteristics 120 2500 2000 180 120 90 60 30 1500 RMS Limit 1000 Conduc tion Angle ST780C..L Series TJ = 125C 500 0 0 100 90 Conduction Angle 80 70 60 30 50 60 40 90 120 180 30 20 0 400 800 1200 1600 Average On-state Current (A) Fig. 3 - Current Ratings Characteristics 2000 Maximum Average On-state Power Loss (W) Maximum Allowable Heatsink Temp erature (C) 110 800 1200 1600 2000 Fig. 5 - On-State Power Loss Characteristics ST780C..L Series (Double Side Cooled) R thJ-hs (DC) = 0.031 K/ W 120 400 Average On-state Current (A) Average On-state Current (A) Fig. 2 - Current Ratings Characteristics 130 1000 1500 2000 2500 3000 Average On-state Current (A) Average On-state Current (A) 130 500 3500 DC 180 120 90 60 30 3000 2500 2000 1500 RMS Limit Conduction Period 1000 ST780C..L Series TJ = 125C 500 0 0 500 1000 1500 2000 2500 3000 Average On-state Current (A) Fig. 6 - On-State Power Loss Characteristics Revision: 28-Sep-17 Document Number: 94415 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ST780CL Series 22000 Vishay Semiconductors Peak Half Sine Wave On-state Current (A) Peak Half Sine Wave On-state Current (A) www.vishay.com At Any Rated Load Condition And With Rated VRRM Applied Following Surge. Initial TJ = 125C @60 Hz 0.0083 s @50 Hz 0.0100 s 20000 18000 16000 14000 12000 ST780C..L Series 10000 1 10 100 26000 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control 24000 Of Conduction May Not Be Maintained. Initial TJ = 125C 22000 No Voltage Reapplied Rated VRRMReapplied 20000 18000 16000 14000 12000 ST780C..L Series 10000 0.01 0.1 1 Pulse Train Duration (s) Number Of Equal Amplitude Half Cyc le Current Pulses (N) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Instantaneous On-state Current (A) 10000 TJ = 25C 1000 TJ = 125C ST780C..L Series 100 0.5 1 1.5 2 2.5 Instantaneous On-state Voltage (V) Transient Thermal Impedance Z thJ-hs (K/ W) Fig. 9 - On-State Voltage Drop Characteristics 0.1 Steady State Value R thJ-hs = 0.073 K/ W (Single Side Cooled) R thJ-hs = 0.031 K/ W (Double Side Cooled) 0.01 (DC Operation) ST780C..L Series 0.001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 10 - Thermal Impedance ZthJ-hs Characteristics Revision: 28-Sep-17 Document Number: 94415 5 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-ST780CL Series www.vishay.com Vishay Semiconductors Rec tangular gate pulse a) Recommended load line for rated di/ dt : 20V, 10ohms; tr<=1 s b) Rec ommended load line for <=30% rated di/ dt : 10V, 10ohms 10 tr<=1 s (1) PGM = 10W, (2) PGM = 20W, (3) PGM = 40W, (4) PGM = 60W, tp = 4ms tp = 2ms tp = 1ms tp = 0.66ms (a) (b) 1 Tj=-40 C Tj=25 C Tj=125 C Instantaneous Gate Voltage (V) 100 (2) (1) (3) (4) VGD IGD 0.1 0.001 Frequenc y Limited by PG(AV) Device: ST780C..L Series 0.01 0.1 1 10 100 Instantaneous Gate Current (A) Fig. 11 - Gate Characteristics ORDERING INFORMATION TABLE Device code VS- ST 78 0 C 06 L 1 - 1 2 3 4 5 6 7 8 9 1 - Vishay Semiconductors product 2 - Thyristor 3 - Essential part number 4 - 0 = converter grade 5 - C = ceramic PUK 6 - Voltage code x 100 = VRRM (see Voltage Ratings table) 7 - L = PUK case B-PUK (TO-200AC) 8 - 0 = eyelet terminals (gate and auxiliary cathode unsoldered leads) 1 = fast-on terminals (gate and auxiliary cathode unsoldered leads) 2 = eyelet terminals (gate and auxiliary cathode soldered leads) 3 = fast-on terminals (gate and auxiliary cathode soldered leads) 9 - Critical dV/dt: None = 500 V/s (standard selection) L = 1000 V/s (special selection) LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95076 Revision: 28-Sep-17 Document Number: 94415 6 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors B-PUK (TO-200AC) DIMENSIONS in millimeters (inches) Creepage distance: 36.33 (1.430) minimum Strike distance: 17.43 (0.686) minimum 0.7 (0.03) MIN. 34 (1.34) DIA. MAX. 2 places C 27 (1.06) MAX. Pin receptacle AMP. 60598-1 A 0.7 (0.03) MIN. Note: A = Anode C = Cathode 53 (2.09) DIA. MAX. 6.2 (0.24) MIN. 20 5 58.5 (2.3) DIA. MAX. 4.7 (0.18) 36.5 (1.44) 2 holes DIA. 3.5 (0.14) x 2.5 (0.1) deep Quote between upper and lower pole pieces has to be considered after application of mounting force (see thermal and mechanical specification) Revision: 12-Jul-17 Document Number: 95076 1 For technical questions within your region: DiodesAmericass@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: ST780C04L0L ST780C04L1L ST780C06L0L VS-ST780C06L0 VS-ST780C04L1 VS-ST780C06L1 VSST780C04L0