QT88ACD4M-FREQ2 - Q-TECH Corporation

QT88 Series

5.0Vdc and 3.3Vdc, SMD CERAMIC J- LEADS HIGH-RELIABILITY CLOCK OSCILLATORS

_______________________________________________________________________________________

Q-Tech Corporation

10150 West Jefferson Blvd. Culver City, CA 90232

Tel (310) 836 - 7900 Fax (310) 836 – 2157

Doc#088-008 Rev. – May 2006 www.q-tech.com

Page 1 of 3

FEATURES

• Broad frequency range from 500 kHz to 160 MHz.

• Rugged design for high shock and vibration.

• ACMOS, HCMOS, TTL, LVHCMOS logic.

• 5.0V or 3.3V Tri-State Output Option (D).

• High temperature reliability for Down-Hole applications.

• J-leads.

ELECTRICAL CHARACTERISTICS

PARAMETERS (5.0V ± 10%)

QT88AC QT88HC QT88T

Output frequency range (Fo) 500.00 kHz – 125.00MHz

(Low frequency down to 1kHz available in No-Tristate) 500.00 kHz – 85.000MHz

Supply voltage (Vdd) 5.0Vdc ± 10%

Frequency stability vs. temperature See Option codes

Operating temperature (Topr) See Option codes

Storage temperature (Tsto) -62°C to +125°C

Symmetry

(15pF at 50% output level AC or HC)

(6TTL load at 1.4Vdc TTL)

45/55% max. (500kHz ~ <1 6MHz)

40/60% max. (16MHz ~ 125MHz)

(Tighter symmetry available)

Operating supply current (Idd)

(No Load)

(Lower current available)

20 mA max. (500kHz ~ < 16MHz)

25 mA max. (16MHz ~ < 32MHz)

35 mA max. (32MHz ~ < 60MHz)

45 mA max. (60MHz ~ = 125MHz)

Rise and Fall times (Tr/Tf)

(at 5.0Vdc supply, 15pF//10kohms load) 6ns max. (Fo < 30M)

3ns max. (30M = Fo = 125M)

(between 10% to 90%)

7ns max. (Fo < 30M)

5ns max. (30M = Fo = 125M)

(between 10% to 90%)

5ns max. (Fo < 30M)

3ns max. (30M = Fo = 85M)

(between 0.8V to 2V)

Output load (CL)

15pF // 10kohms

(50pF max. or 10TTL for F = 60M)

(30pF max. or 6TTL for F = 85M)

15pF // 10kohms

(2LSTTL) 10TTL (F < 60MHz)

6TTL (60MHz to 85MHz)

Start-up time (Tstup) 15pF load 5ms max.

Output voltage (Voh/Vol) 0.9xVdd min. ; 0.1xVdd max. 2.4V min.; 0.4V max.

Enable/Disable Tristate function (*D) Pin 1 VIH = 2.2V Oscillation; VIL = 0.8V High Impedance

Jitter RMS 1s (at 25°C) 8ps typ. (<40MHz); 3ps typ. (= 40MHz)

Aging (at 70°C) ± 5ppm/year max.

Freq. vs. supply voltage tolerance (±10%)

± 4ppm max.

PARAMETERS (3.3V ± 10%)

QT88L

Output frequency range (Fo) 500.000 kHz – 160.000MHz

(Low frequency down to 1kHz available in No-Tristate)

Supply voltage (Vdd) 3.3Vdc ± 10%

Frequency stability vs. temperature See Option codes

Operating temperature (Topr) See Option codes

Storage temperature (Tsto) -62°C to +125°C

Operating supply current (Idd)

(No Load)

(Lower current available for

high-temperature applications)

6 mA max. (500kHz ~ < 16MHz)

10 mA max. (16MHz ~ < 32MHz)

20 mA max. (32MHz ~ < 60MHz)

30 mA max. (60MHz ~ < 100MHz)

QT88 Series

5.0Vdc and 3.3Vdc, SMD CERAMIC J- LEADS HIGH-RELIABILITY CLOCK OSCILLATORS

_______________________________________________________________________________________

Q-Tech Corporation

10150 West Jefferson Blvd. Culver City, CA 90232

Tel (310) 836 - 7900 Fax (310) 836 – 2157

Doc#088-008 Rev. – May 2006 www.q-tech.com

Page 2 of 3

40 mA max. (100MHz ~ < 130MHz)

45 mA max. (130MHz ~ 160MHz)

Symmetry (15pF, at 50% output level) 45/55% max. (500kHz ~ <16MHz); 40/60% max. (16MHz ~ 160MHz)

(Tighter symmetry available)

Rise and Fall times (Tr/Tf)

(at 3.3Vdc supply, 15pF //10kohms)

(Between 10% and 90% of output level)

6ns max. (500kHz to < 40MHz)

3ns max. (40MHz ~ 160MHz)

Output load (CL) 15pF // 10kohms

(30pF max. for F = 50MHz)

Start-up time (Tstup) 5ms max.

Output voltage (Voh/Vol) 0.9xVdd min. ; 0.1xVdd max.

Enable/Disable Tristate function (* D) Pin 1 VIH = 2.2V Oscillation; VIL = 0.8V High Impedance

Jitter RMS 1s (at 25°C, 3.3Vdc supply) 15ps typ. (< 40MHz); 8ps typ. (= 40MHz)

Aging (at 70°C) ± 5ppm/year max.

Freq. vs. supply voltage tolerance (±10%)

± 4ppm max.

ORDERING INFORMATION

QT88

10 M

- 85.000MHz

Logic Tristate Option Freq. stability vs. Temperature Screening option

AC = ACMOS

HC = HCMOS

T = TTL

L = LVHCMOS

D (*)

(Left blank if

No Tristate)

1 = ±100ppm at 0°C to +70°C

4 = ± 50ppm at 0°C to +70°C

5 = ± 25ppm at -20°C to +70°C

6 = ± 50ppm at -55°C to +105°C

9 = ± 50ppm at -55°C to +125°C

10 = ±100ppm at -55°C to +125°C

11 = ± 50ppm at - 40°C to +85°C

12 = ±100ppm at - 40°C to +85°C

14 = ± 20ppm at -20°C to +70°C

15 = ± 25ppm at - 40°C to +85°C

± 40ppm to ± 350ppm for

high-temperature applications

at – 55°C to +200°C.

Contact Q-Tech for details.

(Designate M for Product Level B

MIL-PRF-55310 environmental

screening).

(Left blank if unscreened)

For frequency stability vs. temperature options not listed herein, please request a custom part number.

Part numbering exa mples: QT 88ACD9M-100.000MHz; QT88LD10-16.000MHz.

Q-Tech will assign a custom part number for high-temperature applications with frequency-temperature stability

tailored to specific requirements.

STANDARD SCREENING PER MIL-PRF-55310, LEVEL B

Internal Visual: MIL-STD-883, Method 2017 and 2032.

Stabilization bake: MIL-STD-883, Method 1008, Cond. C.

Temperature cycling: MIL-STD-883, Method 1010, Cond. B.

Constant acceleration: MIL-STD-883, Method 2001, Cond. A, Y1 axis.

Seal Fine Leak: MIL-STD-883, Method 1014, Cond. A.

Seal Gross Leak: MIL-STD-883, Method 1014, Cond. C.

Burn-in: 160 hours, 125°C with load.

Final Electrical tests.

QT88 Series

5.0Vdc and 3.3Vdc, SMD CERAMIC J- LEADS HIGH-RELIABILITY CLOCK OSCILLATORS

_______________________________________________________________________________________

Q-Tech Corporation

10150 West Jefferson Blvd. Culver City, CA 90232

Tel (310) 836 - 7900 Fax (310) 836 – 2157

Doc#088-008 Rev. – May 2006 www.q-tech.com

Page 3 of 3

OUTLINE DRAWING

PIN NO. FUNCTION

1 TRISTATE or NC

2 GND/CASE

3 OUTPUT

4 VDD

STANDARD QCI ENVIRONMENTAL SPECIFICATIONS:

(Custom requirements available upon request)

Vibration sinusoidal: MIL-STD-202, Method 204, Cond. D.

Shock, non operating: MIL-STD-202, Method 213, Cond. I.

Thermal shock, non operating: MIL-STD-202, Method 107, Cond. B.

Ambient pressure, non operating: MIL-STD-202, 105, Cond. C, 5 min. dwell time. Dimensions: inch

Resistance to solder heat: MIL-STD-202, Method 210, Cond. E.

Moisture resistance: MIL-STD-202, Method 106.

Terminal strength: MIL-STD-202, Method 211, Cond. C.

Resistance to solvents: MIL-STD-202, Method 215.

Solderability: MIL-STD-202, Method 208.

Standard packaging in Anti-Static Plastic Tube, unless otherwise specified.

Tape and Reel Packaging available.

Packaging quantity:

60pcs/tube.

800pcs/reel.

Remark: Specifications subject to change without prior notice.

Please contact our factory or visit our website, www.q-tech.com, for technical notes and updates.

Please contact us for variations on these specifications.