Delta SMA connectors are subminiature, precision, 50 Ωimpedance connectors with 1⁄4"-36 threaded coupling.
They are best suited for use with high-frequency semi-rigid cables in demanding applications up to 18 GHz, or
miniature flexible cables up to 12.4 GHz. Our extensive line of SMA receptacles includes configurations for virtually
any packaging requirement, and we can supply any adapter or accessory you may need to complete your system design.
Adapters between SMA and other series are shown starting on page 176. Many of our SMA connectors are available as
MIL-PRF-39012 QPL versions. These types are listed starting on page 195.
As with our other connector series, Delta’s customer-driven design results in SMA series connectors with practical and
unique features that make your design and assembly process easier. Some of these include:
•One-Step cable connectors for quick, accurate assembly to semi-rigid cable.
•PressMount receptacles (page 115) mount securely in a single round hole, saving space on your components and
reducing your housing fabrication costs.
•Panel receptacles with flange sizes to match the same hole pattern as standard BNC, TNC or N connectors, letting you
drill one hole pattern and mount BNC, N, SMA, TNC, or 7/16 series connectors as needed.
•Edge-mount P.C. board receptacles (page 114).
•Our new E-Line brass SMA connectors provide a lower-cost alternative for commercial applications (page 123).
Our SMA series product line is still growing, so please call if you don’t see what you need.
Cable Plugs for Semi-Rigid Cable ................................. 2
Cable Plugs for Flexible Cable ....................................... 3
Straight Cable Jacks for Semi-Rigid Cable ................. 4
Bulkhead Cable Jacks for Semi-Rigid Cable .............. 4
Panel Cable Jacks for Semi-Rigid Cable ...................... 4
Straight Cable Jacks for Flexible Cable....................... 5
Bulkhead Cable Jacks for Flexible Cable.................... 5
Straight Panel Jack Receptacles.................................... 6
Panel Jack Receptacles for Microstrip .........................10
Right Angle Panel Jack Receptacles............................ 11
Stripline Receptacles......................................................... 11
Bulkhead Jack Receptacles ............................................. 12
P.C. Board Receptacles (Through-Hole Mount)....... 12
P.C. Board Receptacles (Edge Mount)......................... 13
PressMount Receptacles ................................................. 14
Panel Plug Receptacles .................................................... 15
Dust Caps............................................................................... 19
In-Series Adapters.............................................................. 20
Electrical:
Nominal Impedance: 50 ohms.
Frequency Range: DC–18 GHz (with semi-rigid cable);
DC–12.4 GHz (with flexible cable).
Voltage Rating: 335–500 volts RMS (dependent on cable).
Dielectric Withstanding
Voltage : 500–1500 volts RMS (dependent on cable).
Insulation Resistance: 5,000 megohms.
Materials/Finishes:
Insulators: Teflon per ASTM D1710.
Male Contacts: Brass per ASTM B16, or
Beryllium Copper per ASTM B196.
Female Contacts: Beryllium Copper per ASTM B196.
Contact Plating : Gold per MIL-DTL-45204.
Gaskets: Silicone rubber per ZZ-R-765,Class II, Grade 50.
Other Metal Parts: Stainless steel per ASTM A582, plated gold per
MIL-DTL-45204 or passivated to meet corrosion requirements of MIL-
PRF-39012; or Brass per ASTM B16: plated gold per MIL-DTL-45204.
All other specifications are in accordance with the latest issues
of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL
specifications, and interfaces are in accordance with MIL-STD-348.
*These specifications are typical and may not apply to all
connectors. Detailed specifications for individual connectors
are available on request.
SMA Connectors
General Description
1
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
SMA Configuration
SMA Specifications*
Reference Plane
Insulator projection .000 max.
.100 max.
Contact shoulder projection
.000 max; recession .010 max.
.135 max.
.250 min.
.1808 max.
.0355/.0370
.015/.045
.250-36 UNS-2B,
.130 min.
full thread
Plug Interface**
Insulator projection .000 max. Contact projection .000 max;
recession .010 max.
.049
.051
.015/.045
.1810
min.
.208
.216
.218 min.
.250-36 UNS-2A,
.170 min. full thread
.074/.078
Reference Plane
Jack Interface**
**Some proportions
altered to illustrate detail.
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
13 1 .330 . — Gold None (2)1301031G003-000 G/01
13 1 .330 . — Gold/PCN (1)None (2)1301031K003-000 G/01
13 2 .330 .445 Gold None (2)1301031G003-002 G/01
13 2 .330 .445 Gold/PCN (1)None (2)1301031K003-002 G/01
13 2 .330 .445 Gold Gold 1301031G003-003 H/01
13 2 .330 .445 Gold/PCN (1)Gold 1301031K003-012 H/01
13 3 .680 .312 Gold Gold (C)1301031G007-000 ***
13 4 .330 .430 Gold/PCN (1)Gold (C)1301031K003-008 I/01
14 2 .330 .445 Gold Gold 1301094G003-000 H/01
14 2 .330 .445 Gold/PCN (1)Gold 1301094K003-000 H/01
14 3 .680 .312 Gold Gold (C)1301025G007-000 ***
14 4 .330 .430 Gold/PCN (1)Gold (C)1301094K003-001 I/01
Figure 1
(Direct solder)
A
Figure 2
(Direct solder)
A
B
Figure 4
(One-Step cable attachment)
A
B
Figure 3
(Solder-clamp)
A
B hex
.250 hex
Delta One-Step Cable Attachment for Semi-Rigid Cable
Solder
Cable Delta “One-Step” connectors feature
captivated contacts and insulators to
allow rapid, easy assembly to semi-rigid
cable—simply trim the cable jacket and
dielectric flush, chamfer the center con-
ductor, insert into the connector, and
solder the jacket to the connector body.
(1)Gold-plated body and passivated coupling nut. (2)Cable center conductor used as contact.
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
13 1 .680 .430 Gold Gold (C)1305031G003-000 J/01
13 1 .680 .430 Gold/PCN (1)Gold (C)1305031K003-000 J/01
13 2 .570 .580 Gold Gold (C)1305031G003-002 I/01
13 2 .570 .580 Gold/PCN (1)Gold (C)1305031K003-004 I/01
14 1 .680 .430 Gold Gold (C)1305025G003-000 J/01
14 1 .680 .430 Gold/PCN (1)Gold (C)1305025K003-000 J/01
14 2 .570 .580 Gold Gold (C)1305094G003-003 I/01
14 2 .570 .580 Gold/PCN (1)Gold (C)1305094K003-005 I/01
Figure 1
(Direct solder)
A
B
Figure 2
(One-Step cable attachment)
A
B
(1)Gold-plated body and passivated coupling nut.
See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.
(C) in contact plating column indicates captive contact.
SMA Cable Plugs
Straight Plug - For Semi-Rigid Cable
2
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Right Angle Plug - For Semi-Rigid Cable
•
•
A
B
(to end of crimp sleeve)
C max.
Figure 2
(Clamp type)
B
C hex
A
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B C Body Contact Trim Code
5 1 .330 .700 1.187 Gold Gold 1303017G000-000 K/02
5 1 .330 .700 1.187 Passivated Gold 1303017K000-000 K/02
6 1 .330 .700 1.187 Gold Gold 1303013G000-000 K/02
6 1 .330 .700 1.187 Passivated Gold 1303013K000-002 K/02
9 1 .330 .700 1.187 Gold Gold 1303036G000-000 K/02
9 1 .330 .700 1.187 Passivated Gold 1303036K000-000 K/02
10 1 .330 .700 1.187 Gold Gold 1303100G000-002 K/02
10 1 .330 .700 1.187 Passivated Gold 1303100K000-002 K/02
5, 6 2.330 .750 .312 Gold Gold (C)1301015G005-000 ***
5, 6 2.330 .750 .312 Passivated Gold (C)1301015K005-000 ***
9 2 .330 .750 .312 Gold Gold (C)1301037G005-000 ***
9 2 .330 .750 .312 Passivated Gold (C)1301037K005-000 ***
Figure 1
(Crimp type, shown with
supplied heat-shrink tubing)
A
B
(to end of
crimp sleeve)
C max.
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B C Body Contact Trim Code
5 1 .680 .600 1.06 Gold Gold (C)1307017G001-000 L/03
5 1 .680 .600 1.06 Passivated Gold (C)1307017K001-000 L/03
6 1 .680 .600 1.06 Gold Gold (C)1307013G001-000 L/03
6 1 .680 .600 1.06 Passivated Gold (C)1307013K001-000 L/03
9 1 .680 .600 1.06 Gold Gold (C)1307036G001-000 L/03
9 1 .680 .600 1.06 Passivated Gold (C)1307036K001-000 L/03
10 1 .680 .600 1.06 Gold Gold (C)1307100G001-000 L/03
10 1 .680 .600 1.06 Passivated Gold (C)1307100K001-000 L/03
11 1 .680 .600 1.06 Gold Gold (C)1307038G001-000 L/03
11 1 .680 .600 1.06 Passivated Gold (C)1307038K001-000 L/03
See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.
(C) in contact plating column indicates captive contact.
See page 194 for MIL-PRF-39012 QPL version.
See page 195 for MIL-PRF-39012 QPL version.
SMA Cable Plugs
Straight Plug - For Flexible Cable
3
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Right Angle Plug - For Flexible Cable
•
•
Figure 1
(Crimp type, shown with
supplied heat-shrink tubing)
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
13 1 .500 .250 Gold Gold 1308031G003-002 H/01
13 2 .680 .312 Gold Gold (C)1308031G007-000 ***
13 3 .500 .250 Gold Gold (C)1308031G003-004 I/01
14 1 .500 .250 Gold Gold 1308094G003-000 H/01
14 2 .680 .312 Gold Gold (C)1308025G007-000 ***
14 3 .500 .250 Gold Gold (C)1308094G003-001 I/01
Figure 1
(Direct solder)
A
B hex
Figure 3
(One-Step
cable attachment) A
B hex
Figure 2
(Solder-clamp)
A
B hex
.250
hex
Figure 3
(Direct solder,
with mounting gasket)
C hex
A
.093
max. panel
B
Figure 5
(One-Step cable attachment,
with mounting gasket)
C hex
A
.093
max. panel
B
Figure 4
(Solder-clamp,
no mounting gasket)
C
hex
.093
max. panel
C hex
B
A
Delta One-Step
Cable Attachment
for Semi-Rigid Cable
Solder
Cable Delta “One-Step” connectors feature captivated contacts and
insulators to allow rapid, easy assembly to semi-rigid cable—
simply trim the cable jacket and dielectric flush, chamfer the
center conductor, insert into the connector, and solder the
jacket to the connector body.
Figure 1
(Direct solder)
A
B
C
Figure 2
(One-Step cable attachment)
A
B
C
Cable Fig. Dimensions Mounting Plating Delta P/N
Group A B C Figure Body Contact
13 1 .560 .375 .065 05 Gold Gold 1311031G053-000 H/01
13 2 .500 .375 .065 05 Gold Gold (C)1311031G053-003 I/01
13 3 .750 .415 .437 67 Gold Gold 1317031G673-000 H/02
13 4 .750 .440 .312 67 Gold Gold (C)1317031G677-000 ***
13 5 .700 .415 .437 67 Gold Gold (C)1317031G673-003 I/01
14 1 .500 .375 .065 05 Gold Gold 1311025G053-000 H/01
14 2 .500 .375 .065 05 Gold Gold (C)1311025G053-001 I/01
14 3 .750 .415 .437 67 Gold Gold 1317025G673-000 H/02
14 4 .750 .440 .312 67 Gold Gold (C)1317025G677-000 ***
14 5 .750 .415 .437 67 Gold Gold (C)1317025G673-001 I/01
Assembly
Procedure/
Trim Code
See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact.
SMA Cable Jacks
Straight Jack - For Semi-Rigid Cable
4
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Bulkhead Jacks - For Semi-Rigid Cable
•
•
Figure 1
(Crimp type, shown with supplied heat-shrink tubing)
C
hex
A
(to end of crimp sleeve)
B max.
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B C Body Contact Trim Code
5 1 .800 1.125 .250 Gold Gold 1308017G000-000 K/03
5 1 .800 1.125 .250 Passivated Gold 1308017K000-000 K/03
6 1 .800 1.125 .250 Gold Gold 1308013G000-000 K/03
6 1 .800 1.125 .250 Passivated Gold 1308013K000-000 K/03
9 1 .800 1.125 .250 Gold Gold 1308037G000-000 K/03
9 1 .800 1.125 .250 Passivated Gold 1308037K000-000 K/03
Figure 1
(Crimp type, shown with supplied heat-shrink tubing)
.312
hex
B
(to end of crimp sleeve)
A
C max.
.125 max. panel
Figure 2
(Clamp type)
.312
hex
A max.
C hex
B
.125 max. panel
Cable Fig. Dimensions Mounting Plating Delta P/N
Group A B C Figure Body Contact
5 1 .450 .940 1.25 67 Gold Gold 1319017G670-000 K/04
5 1 .450 .940 1.25 67 Passivated Gold 1319017K670-000 K/04
6 1 .450 .940 1.25 67 Gold Gold 1319013G670-000 K/04
6 1 .450 .940 1.25 67 Passivated Gold 1319013K670-000 K/04
9 1 .450 .940 1.25 67 Gold Gold 1319037G670-000 K/04
9 1 .450 .940 1.25 67 Passivated Gold 1319037K670-000 K/04
10 1 .450 .940 1.25 67 Gold Gold 1319100G670-000 K/04
10 1 .450 .940 1.25 67 Passivated Gold 1319100K670-000 K/04
5, 6 2 .850 .450 .312 67 Gold Gold (C)1316015G675-000 ***
5, 6 2 .850 .450 .312 67 Passivated Gold (C)1316015K675-000 ***
9 2 .850 .450 .312 67 Gold Gold (C)1316037G675-000 ***
9 2 .850 .450 .312 67 Passivated Gold (C)1316037K675-000 ***
Assembly
Procedure/
Trim Code
See page 209 for cable groups. •Assembly procedures start on page 210. •***Contact factory for cable assembly instructions.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact.
See page 195 for MIL-PRF-39012 QPL version.
See page 196 for MIL-PRF-39012 QPL version.
SMA Cable Jacks
5
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Straight Jack - For Flexible Cable
Bulkhead Jack - For Flexible Cable
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold (C)1313000G911-000
1 .375 .250 .067 91 Passivated Gold (C)1313000K911-000
2 .500 .340 .102 05 Gold Gold (C)1313000G051-000
2 .500 .340 .102 05 Passivated Gold (C)1313000K051-002
3 .687 .500 .125 09 Gold Gold (C)1313000G091-000
3 .687 .500 .125 09 Passivated Gold (C)1313000K091-000
4 1.00 .718 .125 33 Gold Gold (C)1313000G331-000
4 1.00 .718 .125 33 Passivated Gold (C)1313000K331-000
5 .625 .481 .025 92 Gold Gold (C)1313000G921-000
5 .625 .481 .025 92 Passivated Gold (C)1313000K921-000
5 .625 .481 .000 92 Gold Gold (C)1313000G921-002
5 .625 .481 .000 92 Passivated Gold (C)1313000K921-002
Figure 1
(3/8" square flange)
Figure 4
(1" square flange, interchangeable
with type N standard flange size)
Figure 3
(11/16 " square flange, interchangeable with
BNC and TNC standard flange size)
Figure 2
(1/2" square flange, SMA standard flange size)
SMA Receptacles
6
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Jack Receptacle - Solder Pot Contact
.58
.375
A
square
C
dia. typ. .065
.032
(I.D. )
B (L) typ.
C
.050
dia.
.58
.375
A
square
C
dia. typ. .065
.032
(I.D. )
B(L) typ.
C
.050
dia.
.58
.375
A
square
C
dia. typ. .065
.032
(I.D. )
B
(L)typ.
C
.050
dia.
.58
.375
A
square
C
dia. typ.
.065
.032
(I.D. ).050
dia.
B
(L)typ.
C
.58
.375
.223
.102
dia. typ.
.065
.032
(I.D. )
B (L)
C
C
A
.050 dia.
.162 dia.
Figure 5
(2-hole flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
See page 197 for MIL-PRF-39012 QPL version.
See page 197 for MIL-PRF-39012 QPL version.
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure BodyContact
1 .375 .250 .067 91 Gold Gold 1358000G910-002
1 .375 .250 .067 91 Passivated Gold 1358000K910-002
1 .375 .250 .067 91 Gold Gold (C)1358000G911-059
1 .375 .250 .067 91 Passivated Gold (C)1358000K911-059
2 .500 .340 .102 05 Gold Gold 1358000G050-005
2 .500 .340 .102 05 Passivated Gold 1358000K050-005
2 .500 .340 .102 05 Gold Gold (C)1358000G051-003
2 .500 .340 .102 05 Passivated Gold (C)1358000K051-003
3 .687 .500 .125 09 Gold Gold 1358000G090-001
3 .687 .500 .125 09 Passivated Gold 1358000K090-001
3 .687 .500 .125 09 Gold Gold (C)1358000G091-008
3 .687 .500 .125 09 Passivated Gold (C)1358000K091-008
4 1.00 .718 .125 33 Gold Gold 1358000G330-001
4 1.00 .718 .125 33 Passivated Gold 1358000K330-001
4 1.00 .718 .125 33 Gold Gold (C)1358000G331-002
4 1.00 .718 .125 33 Passivated Gold (C)1358000K331-002
5 .625 .481 .102 92 Gold Gold 1358000G920-003
5 .625 .481 .102 92 Passivated Gold 1358000K920-003
5 .625 .481 .102 92 Gold Gold (C)1358000G921-063
5 .625 .481 .102 92 Passivated Gold (C)1358000K921-063
Figure 1
(3/8" square flange)
Figure 4
(1" square flange, interchangeable
with type N standard flange size)
Figure 3
(11/16 " square flange, interchangeable with
BNC and TNC standard flange size)
Figure 2
(1/2" square flange, SMA standard flange size)
.100 .375
A sq.
C dia. typ. .065
B (L) typ.
C
Tab
.004/.007
thick x
.050 wide
.100 .375
A sq.
C dia. typ. .065
B(L) typ.
C
Tab
.004/.007
thick x
.050 wide
.100 .375
A sq.
C
dia. typ. .065
B
(L)typ.
C
Tab
.004/.007
thick x
.050 wide
.100
Tab
.004/.007
thick x
.050 wide
.375
A square
C
dia. typ.
.065
B
(L)typ.
C
.375
.223
C
dia. typ. .065
B
(L)
C
A
.100
Tab
.004/.007
thick x
.050 wide
Figure 5
(2-hole flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
SMA Receptacles
7
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Jack Receptacle - Tab Contact
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold 1343000G910-003
1 .375 .250 .067 91 Passivated Gold 1343000K910-003
1 .375 .250 .067 91 Gold Gold (C)1343000G911-006
1 .375 .250 .067 91 Passivated Gold (C)1343000K911-006
2 .500 .340 .102 05 Gold Gold 1343000G050-006
2 .500 .340 .102 05 Passivated Gold 1343000K050-006
2 .500 .340 .102 05 Gold Gold (C)1343000G051-021
2 .500 .340 .102 05 Passivated Gold (C)1343000K051-021
3 .687 .500 .125 09 Gold Gold 1343000G090-001
3 .687 .500 .125 09 Passivated Gold 1343000K090-001
3 .687 .500 .125 09 Gold Gold (C)1343000G091-006
3 .687 .500 .125 09 Passivated Gold (C)1343000K091-006
4 1.00 .718 .125 33 Gold Gold 1343000G330-006
4 1.00 .718 .125 33 Passivated Gold 1343000K330-006
4 1.00 .718 .125 33 Gold Gold (C)1343000G331-011
4 1.00 .718 .125 33 Passivated Gold (C)1343000K331-011
5 .625 .481 .102 92 Gold Gold 1343000G920-004
5 .625 .481 .102 92 Passivated Gold 1343000K920-004
5 .625 .481 .102 92 Gold Gold (C)1343000G921-006
5 .625 .481 .102 92 Passivated Gold (C)1343000K921-006
Figure 1
(3/8" square flange)
Figure 4
(1" square flange, interchangeable
with type N standard flange size)
Figure 3
(11/16 " square flange, interchangeable with
BNC and TNC standard flange size)
Figure 2
(1/2" square flange, SMA standard flange size)
.050 .375
A sq.
.065
.050 dia.
B (L) typ.
CC
dia.
typ. Slot
.012 wide
(+.003, -.001)
.050 .375
A sq.
.065
.050 dia.
C
dia.
typ.
B(L) typ.
C
Slot
.012 wide
(+.003, -.001)
.050 .375
A sq.
C dia. typ. .065
.050 dia.
B
(L)typ.
CSlot
.012 wide
(+.003, -.001)
.050 .375
A sq.
C
dia. typ. .065
.050 dia.
B
(L)typ.
C
Slot
.012 wide
(+.003, -.001)
.050
Slot
.012 wide
(+.003, -.001)
.375
.223
C dia. typ. .065
B
(L)
C
A
.050 dia.
Figure 5
(2-hole flange)
Other Standard Slot Widths
Our other standard slot widths for these connectors
(.018" and .036") are readily available—call for part numbers.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
SMA Receptacles
8
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Jack Receptacle - Slotted Contact
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold 1358000G910-003
1 .375 .250 .067 91 Passivated Gold 1358000K910-003
1 .375 .250 .067 91 Gold Gold (C)1358000G911-061
1 .375 .250 .067 91 Passivated Gold (C)1358000K911-061
2 .500 .340 .102 05 Gold Gold 1358000G050-000
2 .500 .340 .102 05 Passivated Gold 1358000K050-004
2 .500 .340 .102 05 Gold Gold (C)1358000G051-000
2 .500 .340 .102 05 Passivated Gold (C)1358000K051-000
3 .687 .500 .125 09 Gold Gold 1358000G090-000
3 .687 .500 .125 09 Passivated Gold 1358000K090-000
3 .687 .500 .125 09 Gold Gold (C)1358000G091-014
3 .687 .500 .125 09 Passivated Gold (C)1358000K091-014
4 1.00 .718 .125 33 Gold Gold 1358000G330-000
4 1.00 .718 .125 33 Passivated Gold 1358000K330-000
4 1.00 .718 .125 33 Gold Gold (C)1358000G331-003
4 1.00 .718 .125 33 Passivated Gold (C)1358000K331-003
5 .625 .481 .102 92 Gold Gold 1358000G920-000
5 .625 .481 .102 92 Passivated Gold 1358000K920-000
5 .625 .481 .102 92 Gold Gold (C)1358000G921-010
5 .625 .481 .102 92 Passivated Gold (C)1358000K921-010
Figure 1
(3/8" square flange)
Figure 4
(1" square flange, interchangeable
with type N standard flange size)
Figure 3
(11/16 " square flange, interchangeable with
BNC and TNC standard flange size)
Figure 2
(1/2" square flange, SMA standard flange size)
SMA Receptacles
9
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Jack Receptacle - Post Contact
.375
A sq.
C
dia.
typ.
.065
.705
.590
.050
dia.
.162 dia.
B (L) typ.
C
.705
.590
.050
dia.
.162 dia.
.375
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.705
.590
.050
dia.
.162
dia.
.375
A sq.
C
dia.
typ. .065
B
(L)typ.
C
.705
.590
.050
dia.
.162
dia.
.375
A sq.
C
dia. typ.
.065
B
(L)typ.
C
.705
.590
.050
dia.
.162
dia.
.375
.223
C
dia. typ.
.065
B
(L)
C
A
Figure 5
(2-hole flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .057 91 Gold Gold (C)1358000G911-014
1 .375 .250 .057 91 Passivated Gold (C)1358000K911-014
1 .375 .250 .125 91 Gold Gold (C)1358000G911-085
1 .375 .250 .125 91 Passivated Gold (C)1358000K911-085
2 .500 .340 .057 05 Gold Gold (C)1358000G051-019
2 .500 .340 .057 05 Passivated Gold (C)1358000K051-019
2 .500 .340 .125 05 Gold Gold (C)1358000G051-128
2 .500 .340 .125 05 Passivated Gold (C)1358000K051-128
3 .687 .500 .057 09 Gold Gold (C)1358000G091-015
3 .687 .500 .057 09 Passivated Gold (C)1358000K091-015
3 .687 .500 .125 09 Gold Gold (C)1358000G091-016
3 .687 .500 .125 09 Passivated Gold (C)1358000K091-016
4 1.00 .718 .057 33 Gold Gold (C)1358000G331-004
4 1.00 .718 .057 33 Passivated Gold (C)1358000K331-004
4 1.00 .718 .125 33 Gold Gold (C)1358000G331-005
4 1.00 .718 .125 33 Passivated Gold (C)1358000K331-005
5 .625 .481 .057 92 Gold Gold (C)1358000G051-035
5 .625 .481 .057 92 Passivated Gold (C)1358000K051-035
5 .625 .481 .125 92 Gold Gold (C)1358000G051-034
5 .625 .481 .125 92 Passivated Gold (C)1358000K051-034
Figure 1
(3/8" square flange)
Figure 4
(1" square flange, interchangeable
with type N standard flange size)
Figure 3
(11/16 " square flange, interchangeable with
BNC and TNC standard flange size)
Figure 2
(1/2" square flange, SMA standard flange size)
SMA Receptacles
10
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Jack Receptacle - Post Contact (For Microstrip)
.375
A sq.
.067
dia.
typ.
B (L) typ.
C
.050
.010 dia.
.085 dia.
C
.065
.375
A sq.
.102
dia. typ.
B(L) typ.
C
.050
.010 dia.
.085 dia.
C
.065
.375
A sq.
.125 dia. typ.
B
(L)typ.
C
.050
.010 dia.
.085 dia.
C
.065
A sq.
.125
dia. typ.
B
(L)typ.
C
.375
.050
.010 dia.
.085 dia.
C
.065
.375
.223
.102
dia. typ.
B
(L)
C
A
.050
.010 dia.
.085 dia.
C
.065
Figure 5
(2-hole flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .050 .162 .062 05 Gold Gold (C)1315000G050-000
1 .050 .162 .062 05 Passivated Gold (C)1315000K050-000
2 .004/.007 .050 .100 05 Gold Gold (C)1364000G051-015
2 .004/.007 .050 .100 05 Passivated Gold (C)1364000K051-015
3 .012 .050 .102 05 Gold Gold (C)1366000G051-017
3 .012 .050 .050 05 Passivated Gold (C)1366000K051-017
3 .018 .050 .050 05 Gold Gold (C)1366000G051-018
3 .018 .050 .050 05 Passivated Gold (C)1366000K051-018
3 .036 .050 .050 05 Gold Gold (C)1366000G051-019
3 .036 .050 .050 05 Passivated Gold (C)1366000K051-019
4 .050 .162 .590 05 Gold Gold (C)1364000G051-016
4 .050 .162 .590 05 Passivated Gold (C)1364000K051-016
Figure 1 (Solder pot contact)
Figure 4 (Post contact)Figure 3 (Slotted contact)
Figure 2 (Tab contact)
.500
sq.
.59
.102
dia. typ.
.032
(I.D. )
A dia. B
dia.
.180
.340
(L)typ.
C.505
C
.500
sq.
.59
.102
dia. typ.
.340
(L)typ.
C.505
C
Tab A thick
x B wide
.500
sq.
.59
.102
dia. typ.
B dia.
.340
(L)typ.
C.505
C
Slot
A wide
(+.003, -.001)
.500
sq.
.59
.102 dia. typ.
.340
(L)typ.
C.505
.705
C
B dia.
A dia.
Figure PlatingDimensions Delta P/N
A B C D E F G H Body Contact
1 .031 .085 .375 .010 .072 .562 .438 #2-56 Gold Gold 1357000G000-012
1 .031 .085 .375 .010 .072 .562 .438 #2-56 Passivated Gold 1357000K000-012
1 .063 .085 .375 .010 .072 .562 .438 #2-56 Gold Gold 1357000G000-002
1 .063 .085 .375 .010 .072 .562 .438 #2-56 Passivated Gold 1357000K000-002
1 .125 .085 .375 .010 .072 .562 .438 #2-56 Gold Gold 1357000G000-006
1 .125 .085 .375 .010 .072 .562 .438 #2-56 Passivated Gold 1357000K000-006
Figure 1
8 holes, H thread
G dia. b.c. F dia.
.050 dia.
E dia.
A
D
C
B
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact.
All items available with other flange, contact, and insulator configurations.
SMA Receptacles
11
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Right Angle Panel Jack Receptacle
Stripline Receptacle
•
•
Figure 1
(Rear mount, solder pot contact, no mounting gasket)
Figure 2
(Rear mount, solder pot contact, with mounting gasket)
Figure 4
(Round body, post contact)
Figure 3
(Front mount, solder pot contact, no mounting gasket)
C
A
.032
(I.D. )
.312
hex
B
.050 dia.
.162 dia.
.437
hex
B
C
A
.032
(I.D. )
.050 dia.
.162 dia.
C
A
.032
(I.D. )
.312
hex B
.280
.050 dia.
.162 dia.
C
.160
AB
.250
dia.
.162
dia.
.050
dia.
Figure Dimensions Max. Mounting Plating Delta P/N
A B C Panel Figure Body Contact
1 .670 .450 .000 .125 67 Gold Gold (C)1320000G671-000
1 .670 .450 .000 .125 67 Passivated Gold (C)1320000K671-000
1 .670 .450 .062 .125 67 Gold Gold (C)1320000G821-002
1 .670 .450 .062 .125 67 Passivated Gold (C)1320000K821-000
2.670 .415 .062 .093 67 Gold Gold (C)1320000G821-000
2 .670 .415 .062 .093 67 Passivated Gold (C)1320000K821-011
3 .670 .500 .062 .125 67 Gold Gold (C)1320000G671-005
3 .670 .500 .062 .125 67 Passivated Gold (C)1320000K671-005
4.660 .500 .076 .125 82 Gold Gold 1321000G820-003
4 .660 .500 .076 .125 82 Passivated Gold 1321000K820-003
4.660 .500 .076 .125 82 Gold Gold (C)1321000G821-000
4 .660 .500 .076 .125 82 Passivated Gold (C)1321000K821-014
4.660 .500 .000 .125 82 Gold Gold (C)1321000G821-065
4 .660 .500 .000 .125 82 Passivated Gold (C)1321000K821-065
2Figure1Figure
A
B
C
.250
sq.
.040
sq. typ.
.200
(L)typ.
C.050
dia.
A
B
C
.050
dia.
.250
sq.
.040
sq. typ.
.200
(L)typ.
C
Figure Dimensions Max. Mounting Plating Delta P/N
A B C Board Figure Body Contact
1 .530 .375 .155 .125 PCB05 Gold Gold (C)1367000G911-000
2 .583 .375 .155 .125 PCB05 Gold Gold (C)1369000G000-000
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other contact and insulator configurations.
See page 197 for
MIL-PRF-39012
QPL version.
See page 197 for
MIL-PRF-39012
QPL version.
SMA Receptacles
12
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Bulkhead Jack Receptacles
Printed-Circuit Board Receptacles - Through-Hole Mount
These connectors eliminate the need for drilling P.C. boards for mounting. Edge mounting
provides design versatility, particularly in daughterboard configurations.
In addition, styles with bulkhead mounting allow P.C. boards to be attached directly to
component housings or panels, eliminating the expense of adapters, cable assemblies, and/or
additional board mounting hardware. Bulkhead mounted types are available with mounting
gaskets as an option (see picture).
Delta SMA edge mount receptacles feature gold-plated brass bodies for low cost, with gold-
plated beryllium copper center contacts. Insulators and contacts are mechanically
captivated to meet MIL-PRF-39012 requirements. All are available with stainless-steel bodies. Bulkhead jack with
mounting gasket
B
.065
.250
dia.
.187
.040
typ.
.375
.312
.050 (contact dia.
ush with insulator)
.030
dia.
A
D
C (max. panel)
.040
typ.
PlatingDimensionsBoard Delta P/N
Thickness A B C D Body Contact
.042 .048 .500 .125 .093 Gold Gold (C)1367000G91P-021
.047 .053 .500 .125 .088 Gold Gold (C)1367000G91P-022
.062 .068 .500 .125 .073 Gold Gold (C)1367000G91P-006
.062 .068 .820 .425 .073 Gold Gold (C)1367000G91P-023
Figure 1
(Post contact)
Figure 2
(Tab contact)
.065
.250
dia.
.030
dia.
.187
.040
typ.
.040
typ.
.375
A
.050
(contact dia.
ush with insulator)
.312
B
.375 .065
.250
dia.
.187
.040
typ.
.040
typ.
.375
A
B
.050 (contact dia.
ush with insulator)
Tab contact
.020 wide
x .010 thick
.075
.312
.375
Figure Board Dimensions Plating Delta P/N
Thickness A B Body Contact
1 .042 .048 .093 Gold Gold (C)1367000G91P-026
1 .047 .053 .088 Gold Gold (C)1367000G91P-027
1 .062 .068 .073 Gold Gold (C)1367000G91P-000
2 .042 .048 .103 Gold Gold (C)1367000G91P-024
2 .047 .053 .098 Gold Gold (C)1367000G91P-025
2 .062 .068 .083 Gold Gold (C)1367000G91P-020
(C) in contact plating column indicates captive contact (mechanical captivation). • See page 114 for plug types.
SMA Receptacles
13
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Delta Edge Mount Receptacles
Edge Mount P.C. Board Receptacles - Bulkhead Jack
Edge Mount P.C. Board Receptacles - Straight Jack
•
Figure Dimensions Min. Mounting Plating Delta P/N
A B Panel Hole Body Contact
1 .062 .050 .100 .267 ±.001 dia. Passivated Gold (C)1320000K911-002
2 .390 .050 .100 .267 ±.001 dia. Gold Gold (C)1320000G911-076
3 .100 .005/.008 .100 .267 ±.001 dia. Passivated Gold (C)1320000K911-003
4 .120 .005/.008 .100 .237 ±.001 dia. Gold Gold (C)1320000G911-084
5 .200 .032 .100 .267 ±.001 dia. Passivated Gold (C)1320000K911-004
6 .465 .250 .100 .267 ±.001 dia. Gold Gold (C)1320000G911-085
6 .425 .250 .100 .267 ±.001 dia. Gold Gold (C)1320000G911-078
7 .100 .005/.008 .100 .267 ±.001 dia. Passivated Gold (C)1324000K911-003
8 .062 .050 .100 .267 ±.001 dia. Passivated Gold (C)1324000K911-002
Figure 1
(Post contact)
.275
.115
A
B dia.
dia.
.270
dia. over knurl
Component housing
Internal
Circuitry
Delta PressMount Receptacles
These connectors eliminate the need for complicated mounting hole patterns and
mounting hardware.
They are simply pressed into a single through hole, and the precisely-engineered
knurled mounting section provides retention strength far greater than normal mating
and unmating forces. An integral shoulder provides a positive stop when mounting.
PressMounts are available for a wide variety of Delta connector series, and can be used
in packages as small as the outer diameter of the connector body.
Figure 3
(Tab contact)
Tab
B thick x
.050 wide
.275
.115
A
.300 dia.
.270
dia. over knurl
Figure 5
(Solder pot contact)
.275
.115
A
B (I.D. )
.300 dia.
.270
dia. over knurl
Figure 2
(Post contact,
brass body)
Figure 4
(Tab contact,
brass body)
Figure 6
(Turret contact)
.650
.115
A
B dia.
.300 dia.
.270
dia. over knurl
.453
.167
.276
A
.394 dia.
.240
dia. over knurl
Tab
B thick x
.050 wide
.275
.115
.072
A
B dia.
.300 dia.
.270
dia. over knurl
Figure 7
(Plug, tab
contact) Tab
B thick x
.050 wide .405
.115
A
.437 dia.
.270
dia. over knurl
Figure 8
(Plug, post
contact)
.405
.115
A
B dia.
.437 dia.
.270
dia. over knurl
(C) in contact plating column indicates captive contact (mechanical captivation).
SMA Receptacles
Press Mount Receptacles
14
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Figure 1
(Post contact)
Figure 2
(Tab contact)
.312
.375
A
.065
.030
dia.
.187
.040
typ.
.499
.050 (contact dia.
ush with insulator)
.040
typ.
B
.312
.375
A
B
.040
typ.
.065
.187
.040
typ.
.050 (contact dia.
ush with insulator)
Tab contact
.020 wide
x .010 thick
.075
.499
Figure Board Dimensions Plating Delta P/N
Thickness A B Body Contact
1 .042 .048 .093 Gold Gold (C)1368000G91P-004
1 .047 .053 .088 Gold Gold (C)1368000G91P-005
1 .062 .068 .073 Gold Gold (C)1368000G91P-006
2 .042 .048 .103 Gold Gold (C)1368000G91P-001
2 .047 .053 .098 Gold Gold (C)1368000G91P-002
2 .062 .068 .083 Gold Gold (C)1368000G91P-003
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold (C)1359000G911-013
1 .375 .250 .067 91 Passivated Gold (C)1359000K911-013
2 .500 .340 .102 05 Gold Gold (C)1359000G051-010
2 .500 .340 .102 05 Passivated Gold (C)1359000K051-010
3 .625 .481 .000 92A Gold Gold (C)1359000G921-017
3 .625 .481 .000 92A Passivated Gold (C)1359000K921-017
3 .625 .481 .025 92A Passivated Gold (C)1359000G921-018
3 .625 .481 .025 92A Passivated Gold (C)1359000K921-018
.507
.20
A
square
C
dia. typ.
.065
.032
(I.D. )
B (L) typ.
C
.050 dia.
.507
.065
.032
(I.D. )
.260
.102
dia. typ.
B (L)
C
C
.20
.050 dia.
.162 dia.
.507
.032
(I.D. )
A sq.
C
dia. typ.
.032
(I.D. )
B(L) typ.
C
.20
.065
.050 dia.
Figure 3 (2-hole flange)
Figure 1 (3/8" square flange) Figure 2 (1/2" square flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact.
SMA Receptacles
Edge Mount P.C. Board Receptacles - Straight Plugs
15
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Plug Receptacles - Solder Pot Contact
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold 1359000G910-002
1 .375 .250 .067 91 Passivated Gold 1359000K910-002
1 .375 .250 .067 91 Gold Gold (C)1359000G911-014
1 .375 .250 .067 91 Passivated Gold (C)1359000K911-014
2 .500 .340 .102 05 Gold Gold 1359000G050-005
2 .500 .340 .102 05 Passivated Gold 1359000K050-005
2 .500 .340 .102 05 Gold Gold (C)1359000G051-045
2 .500 .340 .102 05 Passivated Gold (C)1359000K051-045
3 .625 .481 .102 92A Gold Gold 1359000G920-001
3 .625 .481 .102 92A Passivated Gold 1359000K920-001
3 .625 .481 .102 92A Gold Gold (C)1359000G921-019
3 .625 .481 .102 92A Passivated Gold (C)1359000K921-019
.507
.100
Tab
.004/.007
thick x
.050 wide
A sq.
C
dia.
typ.
.065
B (L) typ.
C
.507
.065
.100
.260
C
dia. typ.
B (L)
C
Tab
.004/.007
thick x
.050 wide
.100
Tab
.004/.007
thick x
.050 wide
A sq.
C dia. typ. .065
B(L) typ.
C
.507
Figure 3
(2-hole flange)
Figure 1
(3/8" square flange)
Figure 2
(1/2" square flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
SMA Receptacles
Panel Plug Receptacles - Tab Contact
16
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold 1359000G910-004
1 .375 .250 .067 91 Passivated Gold 1359000K910-004
1 .375 .250 .067 91 Gold Gold (C)1359000G911-023
1 .375 .250 .067 91 Passivated Gold (C)1359000K911-023
2 .500 .340 .102 05 Gold Gold 1359000G050-007
2 .500 .340 .102 05 Passivated Gold 1359000K050-007
2 .500 .340 .102 05 Gold Gold (C)1359000G051-038
2 .500 .340 .102 05 Passivated Gold (C)1359000K051-038
3 .625 .481 .102 92A Gold Gold 1359000G920-002
3 .625 .481 .102 92A Passivated Gold 1359000K920-002
3 .625 .481 .102 92A Gold Gold (C)1359000G921-020
3 .625 .481 .102 92A Passivated Gold (C)1359000K921-020
.050
A sq.
.065
.050 dia.
B (L) typ.
CC
dia.
typ.
.507
Slot
.012 wide
(+.003, -.001)
.050
.507
.065
.260
C
dia. typ.
.050 dia.
B (L)
CSlot
.012 wide
(+.003, -.001)
.507
A
square
C
dia. typ. .065
B
(L)typ.
C.050
.050 dia.
Slot
.012 wide
(+.003, -.001)
Figure 3
(2-hole flange)
Figure 1
(3/8" square flange)
Figure 2
(1/2" square flange)
Other Standard Slot Widths
Our other standard slot widths for these connectors (.018" and .036")
are readily available—call for part numbers.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
SMA Receptacles
Panel Plug Receptacles - Slotted Contact
17
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .375 .250 .067 91 Gold Gold 1359000G910-003
1 .375 .250 .067 91 Passivated Gold 1359000K910-003
1 .375 .250 .067 91 Gold Gold (C)1359000G911-015
1 .375 .250 .067 91 Passivated Gold (C)1359000K911-015
2 .500 .340 .102 05 Gold Gold 1359000G050-000
2 .500 .340 .102 05 Passivated Gold 1359000K050-002
2 .500 .340 .102 05 Gold Gold (C)1359000G051-004
2 .500 .340 .102 05 Passivated Gold (C)1359000K051-004
3 .625 .481 .102 92A Gold Gold 1323000G920-000
3 .625 .481 .102 92A Passivated Gold 1323000K920-000
3 .625 .481 .102 92A Gold Gold (C)1323000G921-001
3 .625 .481 .102 92A Passivated Gold (C)1323000K921-001
.507
.49 .330
.050 dia.
.162 dia.
.065
A sq.
C
dia.
typ.
B (L) typ.
C
.507
.49 .330
.050 dia.
.162 dia.
.065
.260
C
dia. typ.
B (L)
C
.507
.49 .330
.050 dia.
.162 dia.
A
square
C
dia. typ.
.065
B
(L)typ.
C
Figure 3
(2-hole flange)
Figure 1
(3/8" square flange)
Figure 2
(1/2" square flange)
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (epoxy captivated).
All items available with other flange, contact, and insulator configurations.
SMA Receptacles
Panel Plug Receptacle - Post Contact
18
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .500 .340 .102 05 Gold — 1363000G050-001
1 .500 .340 .102 05 Passivated — 1363000K050-002
2 .625 .481 .102 92 Gold — 1363000G920-000
2 .625 .481 .102 92 Passivated — 1363000K920-000
.375
.223
.102
dia. typ.
.065
B (L)
C
A
.375
A
square
C
dia. typ.
.065
B
(L)typ.
C
Figure 2
(2-hole flange)
Figure 1
(1/2" square flange)
A
C (I.D. )
B
A
B
C (I.D. )
Figure Dimensions Features Plating Delta P/N
1 .500 2.25 .144 Bead chain Gold — 1332000G000-000
1 .500 2.25 .144 Bead chain Passivated — 1332000K000-000
1 .275 .—.— No chain Passivated — 1332000K00A-001
1 .500 3.25 .281 Safety chain Passivated — 1332000K00B-003
1 .330 .—.— No chain / shorting type Passivated Passivated 1332000K00C-000
2 .500 2.25 .144 Bead chain Gold — 1333000G000-000
2 .500 2.25 .144 Bead chain Passivated — 1333000K000-000
2 .390 .—.— No chain Passivated — 1333000K00A-000
Figure 1
(Shown with safety chain)
Figure 2
(Shown with bead chain)
See page 208 for mounting dimensions . •Dust caps are available with other chain styles and lengths.
See page 195 for MIL-PRF-39012 QPL versions.
SMA Receptacles
Dummy Receptacles
19
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Dust Caps
Body Contact
•
A B C
Figure Dimensions Max. Mounting Plating Delta P/N
A B Panel Figure Body Contact
1 .875 .555 .190 66 Gold Gold (C)1326000G678-000
2 .875 .575 .250 67 Gold Gold (C)1326000G821-000
2 .875 .575 .250 67 Passivated Gold (C)1326000K821-001
SMA Adapters
Bulkhead Mounted Jack-Jack Adapters (Connects Two Plugs)
20
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Straight Adapters
Dimensions Plating
.500 dia.
AB.375 hex
B
A
Figure 1
(Hermetically sealed, with mounting gasket)
Figure 2
(Non-hermetic, no mounting gasket)
Figure Delta P/N
A B Body Contact
1 .500 .218 Gold Gold (C)1328000G000-000
1 .500 .218 Passivated Gold (C)1328000K000-001
2 .875 .218 Gold Gold (C)1327000G000-000
2 .875 .218 Passivated Gold (C)1327000K000-002
3 .720 .— Gold Gold (C)1334000G000-000
3 .720 .— Passivated Gold (C)1334000K000-000
A
B
A
B
Figure 1
(Straight jack–jack;
connects two plugs)
Figure 2
(Straight plug–plug;
connects two jacks)
(C) in contact plating column indicates captive contact. •See page 208 for mounting dimensions.
A
Figure 3
(Straight jack–plug;
connects one plug
and one jack)
Dimensions Plating
•
Figure PlatingDimensions Delta P/N
A B Body Contact
1 .625 .585 Gold Gold (C)1329000G000-000
1 .625 .585 Passivated Gold (C)1329000K000-000
2 .675 .675 Gold Gold (C)1337000G000-001
2 .675 .675 Passivated Gold (C)1337000K000-001
3 .585 .585 Gold Gold (C)1395000G000-000
3 .585 .585 Passivated Gold (C)1395000K000-000
4 .920 .630 Gold Gold (C)1330000G000-000
4 .920 .630 Passivated Gold (C)1330000K000-000
5 1.00 .590 Gold Gold (C)1349000G000-000
5 1.00 .590 Passivated Gold (C)1349000K000-000
A
B
A
B
A
B
Figure 1
(Right angle plug–jack;
connects one plug and one jack)
Figure 2
(Right angle plug–plug;
connects two jacks)
Figure 3
(Right angle jack–jack;
connects two plugs)
A
B
A
B
Figure 4
(Tee jack–plug–jack;
connects two plugs and one jack)
Figure 5
(Tee jack–jack–jack;
connects three plugs)
(C) in contact plating column indicates captive contact.
SMA Adapters
Right Angle & Tee Adapters
21
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Delta E-Line brass SMA connectors are subminiature, 50 Ωimpedance connectors with 1⁄4"-36 threaded coupling.
Their use of brass for body parts provides lower cost while retaining electrical performance similar to that of stainless
steel SMA counterparts.
If your application does not require the 500 mating cycles of service life provided by stainless steel SMA connectors,
E-Line SMAs can fulfill your needs at a reduced cost. For additional economy, nickel-plated bodies can be specified
instead of gold plating.
E-Line brass SMA connectors can be used with semi-rigid cables in applications up to 18 GHz, or miniature flexible
cables up to 12.4 GHz.
Our E-Line brass SMA product line is still growing, so please call if you don’t see what you need.
Cable Plugs for Semi-Rigid Cable ................................124
Straight Cable Jacks for Semi-Rigid Cable ................124
Bulkhead Cable Jacks for Semi-Rigid Cable .............124
Panel Cable Jacks for Semi-Rigid Cable .....................124
Cable Plugs for Flexible Cable ......................................125
Straight Cable Jacks for Flexible Cable......................125
Bulkhead Cable Jacks for Flexible Cable ...................125
Panel Jack Receptacles (Solder Pot Contact) ..........126
Panel Jack Receptacles (Post Contact)..........................126
Panel Jack Receptacles (Tab Contact)............................126
Bulkhead Jack Receptacles ...............................................127
Printed-Circuit Board Receptacles .................................127
Panel Plug Receptacles (Solder Pot Contact) ............128
Panel Plug Receptacles (Post Contact) .........................128
Panel Plug Receptacles (Tab Contact)...........................128
In-Series Adapters.................................................................129
Electrical:
Nominal Impedance: 50 ohms.
Frequency Range: DC–18 GHz (with semi-rigid cable);
DC–12.4 GHz (with flexible cable).
Voltage Rating: 335–500 volts RMS (dependent on cable).
Dielectric Withstanding
Voltage : 500–1500 volts RMS (dependent on cable).
Insulation Resistance: 5,000 megohms.
Materials/Finishes:
Insulators: Teflon per ASTM D1710.
Male Contacts: Brass per ASTM B16, or
Beryllium Copper per ASTM B196.
Female Contacts: Beryllium Copper per ASTM B196.
Contact Plating : Gold per MIL-DTL-45204.
Gaskets: Silicone rubber per ZZ-R-765,
Class II, Grade 50.
Other Metal Parts: Brass per ASTM B16 or equivalent; gold plated per
MIL-DTL-45204, or nickel plated per AMS-QQ-N-290.
All other specifications are in accordance with the latest issues
of MIL-PRF-39012, or MIL-A-55339, or other applicable MIL
specifications, and interfaces are in accordance with MIL-STD-348.
*These specifications are typical and may not apply to all
connectors. Detailed specifications for individual connectors
are available on request.
E-Line Brass SMA Connectors
General Description
22
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
E-Line Brass SMA Configurations
E-Line Brass SMA Specifications*
Reference Plane
Insulator projection .000 max.
.100 max.
Contact shoulder projection
.000 max; recession .010 max.
.135 max.
.250 min.
.1808 max.
.0355/.0370
.015/.045
.250-36 UNS-2B,
.130 min.
full thread
Plug Interface**
Insulator projection .000 max. Contact projection .000 max;
recession .010 max.
.049
.051
.015/.045
.1810
min.
.208
.216
.218 min.
.250-36 UNS-2A,
.170 min. full thread
.074/.078
Reference Plane
Jack Interface**
**Some proportions altered to illustrate detail.
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
13 1 .330 .344 Gold* None (1)1301031G003-502 G/01
13 2 .459 .330 Gold* None (1)1301031G003-501 G/01
13 2 .330 .459 Gold* Gold 1301031G003-500 H/03
13 3 .460 .630 Gold* Gold (C)1305031G003-500 J/02
14 2 .330 .459 Gold* Gold 1301025G003-500 H/03
14 3 .460 .630 Gold* Gold (C)1305025G003-500 J/02
Figure 1
(Straight plug—direct solder)
Figure 2
(Straight plug—direct solder)
Figure 3
(Right angle plug—direct solder)
B
AA
BB
A
(1)Cable center conductor used as contact.
Figure 3
(4-hole flange, direct solder)
.260
C
dia. typ.
B (L)
C
A
.513
.375
.065
Figure 2
(Bulkhead mount, direct solder)
C
hex
A
.125 max. panel
B
.312 hex
Figure 1
(Straight jack, direct solder)
A
B dia.
.25
Figure 4
(2-hole flange, direct solder)
.513
.375
.065
C dia. typ.
B (L)
C
A
square
Cable Fig. Dimensions Mounting Plating Delta P/N
Group A B C Figure Body Contact
13 1 .500 .335 .— — Gold* Gold 1308031G003-500 H/01
13 2 .850 .500 .312 67 Gold* Gold 1317031G673-500 H/04
13 3 .500 .340 .102 05 Gold* Gold 1311031G053-500 H/01
13 4 .625 .481 .102 92A Gold* Gold 1311031G923-500 H/01
14 1 .500 .335 .— — Gold* Gold 1308025G003-500 H/01
14 2 .850 .500 .312 67 Gold* Gold 1317025G673-500 H/04
14 3 .500 .340 .102 05 Gold* Gold 1311025G053-500 H/01
14 4 .625 .481 .102 92A Gold* Gold 1311025G923-500 H/01
Assembly
Procedure/
Trim Code
* Also available with nickel-plated body—change Gin Delta part number to N.•(C) in contact plating column indicates captive contact.
See page 209 for cable groups. •Assembly procedures start on page 210. •See page 208 for mounting dimensions.
E-Line Brass SMA Cable Plugs
Straight & Right Angle Plugs - For Semi-Rigid Cable
23
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Straight, Panel & Bulkhead Jacks - For Semi-Rigid Cable
•
•
Cable Figure Dimensions Plating Delta P/N Assembly Procedure/
Group A B Body Contact Trim Code
5 1 .880 .330 Gold* Gold 1303017G000-500 K/05
5 3 .650 .630 Gold* Gold (C)1307017G001-500 L/03
6 1 .880 .330 Gold* Gold 1303013G000-500 K/05
6 3 .650 .630 Gold* Gold (C)1307013G001-500 L/03
9 1 .750 .330 Gold* Gold 1303037G000-500 K/03
9 3 .650 .630 Gold* Gold (C)1307037G001-500 L/03
10 1 .750 .330 Gold* Gold 1303100G000-500 K/06
10 3 .650 .630 Gold* Gold (C)1307100G001-500 L/03
11 2 .760 .330 Gold* Gold 1303038G000-500 ***
11 4 .650 .630 Gold* Gold (C)1307038G001-500 L/03
Figure 1
(Straight plug)
Figure 2
(Straight plug) Figure 3
(Right angle plug)
B
A
B
A
B
A
Figure 4
(Right angle plug)
B
A
Figure 3 (Bulkhead jack)
C
hex
A
.125 max. panel B
.312 hex
Figure 2 (Straight jack)
A
B dia.
.250
Figure 1 (Straight jack)
A
B dia.
.250
Figure 4 (Bulkhead jack)
C
hex
A
.125 max. panel
B
.312 hex
Cable Fig. Dimensions Mounting Plating Delta P/N
Group A B C Figure Body Contact
5 1 .760 .335 .— — Gold* Gold 1310017G000-500 K/08
5 3 .990 .500 .312 67 Gold* Gold 1319017G670-500 K/10
6 1 .760 .335 .— — Gold* Gold 1310013G000-500 K/08
6 3 .990 .500 .312 67 Gold* Gold 1319013G670-500 K/10
9 1 .740 .335 .— — Gold* Gold 1310037G000-500 K/08
9 3 .990 .500 .312 67 Gold* Gold 1319037G670-500 K/10
10 1 .740 .335 .— — Gold* Gold 1310100G000-500 K/08
10 3 .990 .500 .312 67 Gold* Gold 1319100G670-500 K/10
11 2 .740 .335 .— — Gold* Gold 1310038G000-500 ***
11 4 .990 .500 .312 67 Gold* Gold 1319038G670-500 ***
Assembly
Procedure/
Trim Code
* Also available with nickel-plated body—change Gin Delta part number to N.•(C) in contact plating column indicates captive contact.
See page 209 for cable groups. •Assembly procedures start on page 210. •See page 208 for mounting dimensions.
E-Line Brass SMA Cable Plugs / Jacks
Straight & Right Angle Plugs - Crimp Type For Flexible Cable
24
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Straight & Bulkhead Jacks - Crimp Type For Flexible Cable
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .500 .340 .102 05 Gold* Gold (C)1313000G051-500
2 .625 .481 .102 92 Gold* Gold (C)1313000G921-500
3 .500 .340 .102 05 Gold* Gold (C)1358000G051-500
4 .625 .481 .102 92 Gold* Gold (C)1358000G921-500
5 .500 .340 .102 05 Gold* Gold (C)1358000G051-501
6 .625 .481 .102 92 Gold* Gold (C)1358000G921-501
Figure 1
(Solder pot contact—square flange)
Figure 5
(Tab contact—square flange)
Figure 3
(Post contact—square flange)
Figure 2
(Solder pot contact—2-hole flange)
Figure 6
(Tab contact—2-hole flange)
Figure 4
(Post contact—2-hole flange)
.197
.037 I.D.
.050 dia. .375
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.197
.375
.065
.223
.102
dia. typ.
B (L)
C
A
.037 I.D.
.050 dia.
.232 .157
.162 dia.
.050 dia.
.375
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.232 .157
.162 dia.
.050 dia.
.375
.065
.223
.102
dia. typ.
B (L)
C
A
.098
Tab
.005
thick x
.050 wide .375
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.098
.375
.065
.223
.102
dia. typ.
B (L)
C
A
Tab
.005
thick x
.050 wide
* Also available with nickel-plated body—change Gin Delta part number to N.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (mechanical captivation).
All items available with other flange, contact, and insulator configurations.
•
•
•
E-Line Brass SMA Receptacles
Panel Jack Receptacles
25
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Figure 1 (Rear mount, solder pot contact, no mounting gasket) Figure 2 (Round body, post contact)
.037 (I.D.)
C
hex
A
.050 dia.
.162 dia. B
.066 .375 hex C
B
A
.500
.250
dia.
.162
dia.
.050
dia.
Figure Dimensions Max. Mounting Plating Delta P/N
A B C Panel Figure Body Contact
1 .670 .450 .375 .125 67 Gold Gold (C)1321000G671-500
2 .660 .157 .075 .125 82 Gold Gold (C)1321000G821-500
2 .620 .118 .000 .125 82 Gold Gold (C)1321000G821-501
AB
C
.276
sq.
.058
sq. typ.
.040
sq. typ.
.200
(L)typ.
C.050
dia.
.020
A
B
C .39
.276
sq.
.058
sq. typ.
.040
sq. typ.
.200
(L)typ.
C.050
dia.
.020
Figure Dimensions Max. Mounting Plating Delta P/N
A B C Board Figure Body Contact
1 .550 .394 .155 .125 PCB05 Gold* Gold (C)1367000G001-500
2 .540 .594 .155 .125 PCB05 Gold* Gold (C)1369000G001-500
3 .560 .756 .155 .125 PCB05/82 Gold* Gold (C)1369000G821-500
4 .650 .494 .155 .125 PCB05 Gold* Gold (C)1368000G001-500
5 .540 .650 .155 .125 PCB05 Gold* Gold (C)1370000G001-500
Figure 1 (Straight jack)
Figure 2 (Right angle jack)
AB
C
.276 sq.
.058
sq. typ.
.040
sq. typ.
.200
(L)typ.
C.050
dia.
.020
.330
A
B
C
.276
sq.
.058
sq. typ.
.040
sq. typ.
.200
(L)typ.
C.050
dia.
.020
.39
Figure 4 (Straight plug)
Figure 5 (Right angle plug)
A
B
.630
C .41
.276
.058 typ.
.040
sq. typ.
.200
(L)typ.
C.050
dia.
.020
.100
max.
panel
Figure 3 (Right angle bulkhead jack)
* Also available with nickel-plated body—change Gin Delta part number to N.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (mechanical captivation).
E-Line Brass SMA Receptacles
Bulkhead Jack Receptacles
26
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Printed-Circuit Board Receptacles
•
•
Figure Dimensions Mounting Plating Delta P/N
A B C Figure Body Contact
1 .500 .340 .102 05 Gold* Gold (C)1323000G051-500
2 .625 .481 .102 92 Gold* Gold (C)1323000G921-500
3 .500 .340 .102 05 Gold* Gold (C)1359000G051-500
4 .625 .481 .102 92 Gold* Gold (C)1359000G921-500
5 .500 .340 .102 05 Gold* Gold (C)1359000G051-501
6 .625 .481 .102 92 Gold* Gold (C)1359000G921-501
Figure 1
(Solder pot contact—square flange)
Figure 5
(Tab contact—square flange)
Figure 3
(Post contact—square flange)
Figure 2
(Solder pot contact—2-hole flange)
Figure 6
(Tab contact—2-hole flange)
Figure 4
(Post contact—2-hole flange)
.037 I.D.
.050 dia.
.197
.507
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.330
.197
.037 I.D.
.050 dia.
.223
.102
dia. typ.
B (L)
C
A
.507
.065
.330
.232 .157
.162 dia.
.050 dia.
.507
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.330
.223
.102
dia. typ.
B (L)
C
A
.232 .157
.162 dia.
.050 dia.
.507
.065
.330
.098
Tab
.005
thick x
.050 wide .507
A sq.
.065
B(L) typ.
C
C
dia.
typ.
.330
.098
Tab
.005
thick x
.050 wide
.223
.102
dia. typ.
B (L)
C
A
.507
.065
.330
* Also available with nickel-plated body—change Gin Delta part number to N.
See page 208 for mounting dimensions. •(C) in contact plating column indicates captive contact (mechanical captivation).
All items available with other flange, contact, and insulator configurations.
E-Line Brass SMA Receptacles
Panel Plug Receptacles
27
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
•
•
•
Figure PlatingDimensions Delta P/N
A B Body Contact
1 .500 .250 Gold* Gold (C)1328000G001-500
2 .900 .— Gold* Gold (C)1327000G001-500
3 .860 .335 Gold* Gold (C)1334000G001-500
4 .654 .594 Gold* Gold (C)1329000G001-500
5 .913 .654 Gold* Gold (C)1330000G001-500
6 .913 .594 Gold* Gold (C)1338000G001-500
A
.330
typ.
A
B dia.
A
.330
B dia.
.25
Figure 1
(Straight jack–jack; connects two plugs)
Figure 2
(Straight plug–plug; connects two jacks)
Figure 3
(Straight jack–plug; connects one plug and one jack)
A
B
Figure 4
(Right angle plug–jack; connects one plug and one jack)
A
B
A
B
Figure 5
(Tee jack–plug–jack; connects two plugs and one jack)
Figure 6
(Tee jack–jack–jack; connects three plugs)
* Also available with nickel-plated body—change Gin Delta part number to N.
(C) in contact plating column indicates captive contact (mechanical captivation).
E-Line Brass SMA Adapters
Straight, Right Angle, & Tee Adapters
28
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
•
•
1) Trim cable jacket to dimension A.
Slide backnut, washer, V-gasket, and
braid clamp onto cable as shown.
Cable jacket should bottom on step
in braid clamp.
2) Comb braid wires out straight and fold back over front
shoulder of braid clamp (braid wires should not overlap
one another after folding). Trim braid wires flush with step
of braid clamp. Trim cable dielectric and center conductor
to dimensions B and C.
3) If support insulator is provided for RG-62 or 71 cable, insert
into hollow in dielectric. Assemble rear bushing or washer (if
supplied), rear insulator (if captive contact) and contact, and
solder contact to center conductor. Rear of contact should be
flush with cable dielectric end. For right angle connectors
with access cap, omit this step entirely.
4) Insert prepared cable and hardware into body
and tighten backnut. For right angle connectors
with access cap, solder center conductor into slot
in contact and tighten access cap.
Code A B C
A/01 .375 (3/8) .047 (3/64) .203 (13/64)
A/02 .375 (3/8) .109 (7/64) .203 (13/64)
A/03 .438 (7/16) .250 (1/4) .188 (3/16)
A/04 .281 (9/32) .047 (3/64) .125 (1/8)
A/05 .313 (5/16) .125 (1/8) .109 (7/64)
A/06 .594 (19/32) .391 (25/64) .156 (5/32)
A/07 .375 (3/8) .047 (3/64) .125 (1/8)
A/08 .281 (9/32) .109 (7/64) .094 (3/32)
A/09 .344 (11/32) .109 (7/64) .094 (3/32)
A/10 .406 (13/32) .109 (7/64) .203 (13/64)
A/11 .500 (1/2) .281 (9/32) .156 (5/32)
A/12 .343 .040 .219
A/13 .375 (3/8) .125 (1/8) .156 (5/32)
A/14 .355 .090 .188 (3/16)
A/15 .425 .094 (3/32) .259
A/16 .328 (21/64) .094 (3/32) .188 (3/16)
A/17 .375 (3/8) .109 (7/64) .125 (1/8)
A/18 .375 (3/8) .062 (1/16) .172 (11/64)
A/19 .375 (3/8) .188 (3/16) .094 (3/32)
Code A B C
A/20 .375 (3/8) .047 (3/64) .172 (11/64)
A/21 .500 (1/2) .313 (5/16) .172 (11/64)
A/22 .375 (3/8) .188 (3/16) .141 (9/64)
A/23 .438 (7/16) .078 (5/64) .172 (11/64)
A/24 .500 (1/2) .094 (3/32) .141 (9/64)
A/25 .438 (7/16) .141 (9/64) .172 (11/64)
A/26 .625 (5/8) .281 (9/32) .250 (1/4)
A/27 .688 (11/16) .281 (9/32) .125 (1/8)
A/28 .656 (21/32) .297 (19/64) .250 (1/4)
A/29 .688 (11/16) .125 (1/8) .313 (5/16)
A/30 .688 (11/16) .469 (15/32) .156 (5/32)
A/31 .700 (21/32) .453 (29/64) .250 (1/4)
A/32 .313 (5/16) .078 (5/64) .188 (3/16)
A/33 .250 (1/4) .078 (5/64) .094 (3/32)
A/34 .250 (1/4) .062 (1/16) .109 (7/64)
A/35 .837 .575 .150
A/36 .450 .250 .150
A/37 .281 .038 .188
A/38 .281 .069 .156
Assembly Procedures
Assembly Procedure A
CAI-A
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Trim Codes For Assembly Procedure A
Backnut
Washer
(if supplied)
V-Gasket Braid Clamp
A
Washer and/or bushing
(if supplied)
Contact
(non-captive)
or
Contact (captive)
& insulator
Fold braid over
B
C
Non-captive Contact
Solder
Solder
Captive Contact
Washer or bushing (if supplied)
4-hole flanges
Figure A B C
04 1/2.360 .089
05 1/2.340 .102
07 11 /16 .500 #3-56 tap
08 11 /16 .500 .136
09 11 /16 .500 .125
10 11 /16 .500 .120
12 11 /16 .500 .109
18 3/4.531 .136
26 1 .718 #6-32 tap
27 1 .718 #4-40 tap
30 1 .718 .166
32 1 .718 .136
32A 1 .718 .136*
33 1 .718 .125
34 1 3/32 .812 .150
36 1 3/16 .906 #6-32 tap
39 1 3/16 .906 .152
40 1 3/16 .906 .125
45 2 1.437 .257
91 .375 .250 .067
91A .375 .232 .093
A
square
C dia. typ.
B
(L)typ.
C
A
D
dia. typ.
B (L)
C
C
* Countersunk to .245 dia.
2-hole flanges
Figure A B C D
92 .223 .481 .625 .102
92A .260 .481 .625 .102
95 .640 1.015 1.30 .125
D-Hole
Figure A B
51 .755 .723
54 .630 .598
55 .630 .583
57 .557 .531
59 .505 .473
62 .442 .410
63 .407 .362
65 .380 .348
66 .319 .292
67 .255 .236
68 .195 .176
Double D-Hole
Figure A B
69 .755 .692
72 .630 .536
75 .380 .341
84 .319 .278
B
A dia.
B
A dia.
Round Hole
Figure A
82 .255
89 .380
A dia.
Twinax Connectors
Figure A B C D
PCB04 .045 .500 .250 .045
A dia. typ.
D
dia.
B (L) typ.
C
C (L) typ.
C
A dia. typ.
.0625 typ.
D
dia.
typ.
B (L) typ.
C
C (L) typ.
C
.125 (L)
C
Coaxial connectors
Figure A B C D
PCB01 .067 .400 .200 .045
PCB02 .045 .500 .250 .045
PCB03 .067 .300 .150 .035
PCB05 .067 .200 .100 .055
PCB06 .067 .200 .100 .045
PCB07 .045 .177 .088 .045
PCB08 .032 .100 .050 .032
(PCB traces are shown for illustrative purpose only,
and are not representative of actual circuitry.)
(PCB traces are shown for illustrative purpose only,
and are not representative of actual circuitry.)
Mounting Figures
Connector Flanges
(Panel Mounted Connectors)
A1
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Panel Cutouts
(Bulkhead Mounted Connectors)
P.C. Board Drilling
Group Cables
1A RG-5, 5A, 5B, 21, 21A; M17/73, /162
1 1B RG-6, 6A; M17/2
1C RG-143, 143A, 212, 222; M17/73, /112, /162
22A RG-8, 8A, 213; M17/74
2B RG-11, 11A; M17/6
3A RG-9, 9A, 9B, 214; M17/75
3 3B RG-13A, 216; M17/77
3C RG-225; M17/127
4 RG-393; M17/127
5 RG-58, 58A, 58C, 141, 141A; M17/28, /111
66A RG-55A, 142, 142A, 223, 400; M17/60, /84, /128
6B RG-55, 55B, 142B; M17/60, /84
77A RG-59, 59A, 59B, 62, 62A, 62B, 62C, 210; M17/29, /30, /97
7B RG-71, 71A, 71B; M17/90
88A RG-122; M17/54
8B RG-180, 180A, 180B, 195; M17/95, /137
99A RG-174, 188, 188A, 316; M17/152
9B RG-179A, 179B, 187, 187A; M17/94, /136
10 Double-Shielded RG-174, 316; M17/152
11 RG-178, 178A, 178B, 196, 196A; M17/93
12 .250" semi-rigid; RG-401; M17/129
13 .141" semi-rigid; RG-402; M17/130
14 .085" semi-rigid; RG-405; M17/133
15 RG-10, 12, 215; M17/6, /74
16 RG-14A, 217; M17/78, /165
17 RG-17A, 218
18 RG-18A, 219
19 RG-115A
20 RG-118A, 228A
21 RG-126
22 RG-302
23 RG-303
24 RG-304
25 Special 8X cable; contact factory for details.
26 Belden 8281
27 RG-108, 108A; M17/45
28 RG-22, 22A, 22B; M17/15
29 Belden 9207; Dearborn 6207; IBM 7362211
30 M17/176
31 AT&T 735A
Cable Group
RG-5, 5A, B 1A
RG-6, 6A 1B
RG-8, 8A 2A
RG-9, 9A, B 3A
RG-10 15
RG-11, 11A 2B
RG-12 15
RG-13A 3B
RG-14A 16
RG-17A 17
RG-18A 18
RG-21, 21A 1A
RG-22, 22A, B 28
RG-55, 55B 6B
RG-55A 6A
RG-58, 58A, C 5
RG-59, 59A, B 7A
RG-62, 62A, B, C 7A
RG-71, 71A, B 7B
RG-108, 108A 27
RG-115A 19
RG-118A 20
RG-122 8A
RG-126 21
RG-141, 141A 5
RG-142, 142A 6A
RG-142B 6B
RG-143, 143A 1C
RG-174 9A
RG-174DS 10
RG-178, 178A, B 11
RG-179A, 179B 9B
RG-180, 180A, B 8B
RG-187, 187A 9B
RG-188, 188A 9A
RG-195 8B
RG-196, 196A 11
RG-210 7A
RG-212 1C
RG-213 2A
RG-214 3A
RG-215 15
RG-217 16
RG-218 17
RG-219 18
RG-222 1C
RG-223 6A
Cable Group
RG-225 3C
RG-228A 20
RG-302 22
RG-303 23
RG-304 24
RG-316 9A
RG-316DS 10
RG-393 4
RG-400 6A
RG-401 12
RG-402 13
RG-405 14
M17/2 1B
M17/6 2B
M17/15 28
M17/28 5
M17/29 7A
M17/30 7A
M17/45 27
M17/73 1A
M17/162 1A
M17/112 1C
M17/74 2A
M17/75 3A
M17/127 3C
M17/77 3B
M17/60 6A
M18/84 6A
M17/128 6A
M17/97 7A
M17/54 8A
M17/95 8B
M17/137 8B
M17/152 9A
M17/93 11
M17/129 12
M17/130 13
M17/133 14
M17/78 16
M17/165 16
M17/176 30
AT&T 735A 31
Belden 8281 26
Belden 9207 29
Dearborn 6207 29
IBM 7362211 29
Note: MIL-PRF-39012 QPL connectors have cable
groups defined by the MIL specification, not the
Delta cable groups shown here. See page 185
for M39012 cable groups.
Cable Groups
Delta Cable Groups
A2
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Cable Group Finder
Delta Electronics Manufacturing Corporation
416 Cabot Street, P.O. Box 53
Beverly, MA 01915
FSCM/CAGE 00795
Ordering & Warranty Information
A3
Delta Electronics Mfg. Corp. deltarf.com 978-927-1060 sales@deltarf.com
Warranty
We warrant our parts to be free of defects and workmanship for one year from purchase. During that time we will repair or replace (at our option)
er’s, or military
installation costs.
No other warranties apply, and no other liability may be assumed or extended by representatives or distributors. The terms of the applicable
warranty or warranties, as the case may be, as set forth herein are the sole and exclusive warranty terms that shall have any
any product order, resulting from the quotation and such terms and in lieu of all other warranties, expressed or implied, including the implied
Returns
Returns will be accepted only with a Return Authorization number issued by Delta, and are subject to inspection and acceptance upon arrival.
Restocking charges will be determined prior to issusnce of Return Authorization. All claims for shortages must be made within 30 days of
receipt by customer.
Ordering Information
or to sale.
Order changes, cancellation, or termination will be accepted only with written approval from Delta Electronics Manufacturing.
Copyright, Trademarks, & Patents
Entire contents copyright 2017, Delta Electronics Manufacturing Corporation. Reproduction rights are hereby granted for, and sp
urchasing procedures,
by Delta customers only.
Heli-Grip® , PressMount® , and Global Manufacturer logo are trademarks. The Heli-Grip design is covered by U.S. and foreign patents.
Delta Electronics Mfg. Corp.
www.deltarf.com
978-927-1060
sales@deltarf.com
PO Box 53
416 Cabot St.
Beverly, MA 01915
Crimp Sleeve Contact (captive)
Contact
(non-captive)
Solder
A
or
B C
1) Trim cable per chart. Slide crimp
sleeve back onto cable.
2) If support insulator is provided for RG-62 or 71 cable, insert
into hollow in dielectric. Solder contact onto center conductor;
back of contact flush with trimmed end of cable dielectric
(omit this step for right angle connectors with access caps).
Flare cut end of braid slightly by rotating dielectric.
3) Insert cable/contact into rear of body, with all braid wires on outside of crimp tail.
a) For captive contact connectors, push cable in until contact snaps into insulator.
b) For noncaptive contact connectors, push cable in until cable dielectric bottoms
in connector.
c) For right angle or tee connectors with access caps, push cable in until end of
braid touches connector body shoulder, and cable center conductor rests in
contact slot.
Trim excess braid wires even with shoulder of body. Slide crimp sleeve forward
until flush with body and crimp (see page 211 for hex die sizes).
For right angle or tee connectors with access caps: Solder center conductor into
contact slot, assemble insulator disc (if supplied), then press cap into body until
seated or screw into place.
Code A B C
B/01 .320 .470 .140
B/02 .422 .578 .172
B/03 .406 .500 .187
B/04 .285 .505 .140
B/05 .335 .460 .140
B/06 .187 .437 .219
B/07 .422 .610 .156
B/08 .422 .562 .219
B/09 .313 .610 .203
B/10 .280 .436 .187
B/11 .430 .542 .156
B/12 .300 .434 .156
B/13 .300 .447 .156
B/14 .420 .645 .187
B/15 .300 .420 .120
B/16 .312 .609 .125
B/17 .250 .500 .156
B/18 .437 .562 .109
B/19 .343 .437 .156
Code A B C
B/20 .250 .375 .156
B/21 .425 .550 .156
B/22 .375 .500 .156
B/23 .281 .469 .125
B/24 .250 .700 .109
B/25 .343 .775 .125
B/26 .343 .437 .109
B/27 .313 .437 .187
B/28 .219 .271 .078
B/29 .200 .320 .060
B/30 .500 .650 .219
B/31 .350 .840 .150
B/32 .175 .260 .095
B/33 .195 .270 .045
B/34 .150 .250 .105
B/35 .195 .280 .170
B/36 .150 .325 .090
B/37 .195 .295 .075
B/38 .150 .225 .095
B/39 .250 .300 .135
Assembly Procedures
Assembly Procedure B
CAI-B
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Trim Codes For Assembly Procedure B
Backnut Washer
Gasket Braid Clamp
Contact (captive)
& insulator
Contact
(non-captive)
Fold braid over
Non-captive
Captive
Solder
A
B
C
or
1) Trim cable jacket to dimension A.
Slide backnut, washer, gasket, and
braid clamp onto cable as shown.
Cable jacket should bottom on step
in braid clamp.
2) Comb braid wires out straight and fold back over front
shoulder of braid clamp (braid wires should not overlap
one another after folding). Trim braid wires flush with
edge of braid clamp. Trim cable dielectric and center
conductor to dimensions B and C.
3) If support insulator is provided for RG-62 or 71 cable,
insert into hollow in dielectric. Assemble rear insulator
(if captive contact) and contact, and solder contact to
center conductor. Rear of contact should be flush with
cable dielectric end.
4) Insert prepared cable and
hardware into body and
tighten backnut. For right
angle connectors with access
cap, solder cable center
conductor to slot in contact
and tighten access cap.
Trim Codes
Code A B C
C/01 .656 (21/32) .141 (9/64) .250 (1/4)
C/02 .500 (1/2) .125 (1/8) .250 (1/4)
C/03 .450 .136 .187
C/04 .375 (3/8) .109 (7/64) .125 (1/8)
C/05 .375 (3/8) .062 (1/16) .250 (1/4)
C/06 .500 (1/2) .188 (3/16) .125 (1/8)
C/07 .575 .438 .094
C/08 .625 (5/8) .141 (9/64) .219 (7/32)
V-Gasket
Backnut Washer
Braid Clamp
Contact (captive)
& insulator
Contact
(non-captive)
Fold braid over
A
B
C
or
Armor Clamp
Non-captive
Captive
Solder
1) Slide armor clamp over cable. Push
armor back to expose cable end.
Slide backnut, washer (if supplied),
gasket, and braid clamp onto cable
as shown. Cable jacket should
bottom on step in braid clamp.
Trim cable jacket to dimension A.
2) Comb braid wires out straight and fold back over
front shoulder of braid clamp (braid wires should
not overlap one another after folding). Trim braid
wires flush with edge of braid clamp. Trim cable
dielectric and center conductor to dimensions B
and C.
3) Assemble rear insulator (if captive contact) and
contact, and solder contact to center conductor.
Rear of contact should be flush with cable
dielectric end.
4) Insert prepared cable and hardware into body and tighten backnut.
Trim armor to fit between armor clamp and braid clamp. Tighten armor clamp.
Trim Codes
Code A B C
D/01 .375 (3/8) .047 (3/64) .250 (1/4)
D/02 .500 (1/2) .188 (3/16) .219 (7/32)
D/03 .344 (11/32) .047 (3/64) .219 (7/32)
D/04 .313 (5/16) .047 (3/64) .172 (11/64)
D/05 .625 (5/8) .281 (9/32) .250 (1/4)
D/06 .313 (5/16) .062 (1/16) .109 (7/64)
Assembly Procedures
Assembly Procedure C
CAI-C-D
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Assembly Procedure D
Backnut
Contact/Insulator/
cone grip assembly
Solder
A
B
C
1) Slide backnut onto cable as
shown. Trim cable to dimen-
sions A and B as shown. Slit
jacket to dimension C in two
places, 180° apart.
2) Slide cone/insulator/contact assembly under
braid until braid is flush with shoulder.
Solder contact to center conductor.
3) Insert prepared cable and
hardware into body; tight-
en assembly by holding
nut stationary and turning
body.
Trim Codes
Code A B C
E/01 .250 (1/4) .141 (9/64) .313 (5/16)
E/02 .219 (7/32) .063 (1/16) .250 (1/4)
E/03 .250 (1/4) .031 (1/32) .250 (1/4)
Backnut Washer
V-Gasket Solder Ferrule
Contact (captive),
insulator, & bushing
Contact
(non-captive)
Non-captive
Captive
Solder
A
or
B
Solder
Solder
1) Trim cable per chart. Slide backnut,
washer, v-gasket, and solder ferrule
onto cable. Trimmed end of cable
jacket should bottom on step in
solder ferrule.
2) Solder ferrule to cable jacket as shown. Retrim
cable dielectric to proper length if it has
extruded from soldering heat. Slide bushing
and rear insulator over cable dielectric if captive
contact. Solder contact onto center conductor;
back of contact flush with trimmed end of
cable dielectric.
Trim Codes
Code A B
F/01 .250 (1/4) .219 (7/32)
F/02 .250 (1/4) .172 (11/64)
F/03 .188 (3/16) .188 (3/16)
F/04 .109 (7/64) .265 (17/64)
F/05 .156 (5/32) .250 (1/4)
F/06 .219 (7/32) .250 (1/4)
F/07 .156 (5/32) .172 (11/64)
F/08 .109 (7/64) .219 (7/32)
3) Insert prepared
cable and hard-
ware into body
and tighten
backnut.
Assembly Procedures
Assembly Procedure E
CAI-E-F
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Assembly Procedure F
with end of body
Soft solder
all around
Coupling nut
Gasket
‘C’ ring
Body
B
A
1) Trim cable as shown.
Remove any burrs
from jacket and
center conductor.
2) Soft solder cable jacket to
body, making sure that end
of cable is flush with end of
body. After solder joint has
cooled, retrim any protrud-
ing dielectric flush with end
of body.
3) Assemble ‘C’ ring and gasket
to body. Compress ‘C’ ring
and slide body assembly into
coupling nut until ring is
seated in groove.
Trim Codes
Code A B
G/01 .090 70-90°
Trim Codes
Code A
H/01 .090
H/02 .060
H/03 .115
H/04 .150
with insulator
Body assembly
Contact
A.015"
Soft solder
all around
1) Trim cable as shown.
Remove any burrs
from jacket and
center conductor.
2) Solder contact to center
conductor, fixturing to
maintain gap as shown.
Remove any excess solder
from outside of contact.
3) Insert cable into body and
solder cable jacket to body,
keeping end of cable flush
with insulator as shown.
Plug body assembly and contact shown; procedure is identical for jack connectors.
with insulator
Body assembly
Soft solder
all around
B
A
1) Trim cable as shown.
Remove any burrs
from jacket and
center conductor.
2) Insert cable into body and
solder cable jacket to body,
keeping end of cable flush
with insulator as shown.
Plug body assembly and contact shown; procedure is identical for jack connectors.
Trim Codes
Code A B
I/01 .090 70-90°
Cable Positioner
.50
.375
.250-36 UNS-2A thread
Using this positioner in the final step of assembly procedure H or I (for plugs only)
will ensure that the contact and insulator are retained in the proper position to
meet MIL-C-39012 requirements. The positioner should be screwed finger-tight
into the mating end of the connector (as shown at right) before the cable jacket is
soldered to the body assembly.
For .085" Cable:
P/N 63-10072-2
For .141" Cable:
P/N 63-10072-1
Assembly Procedures
Assembly Procedure G
CAI-G-I
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Assembly Procedure H
Assembly Procedure I
A
B
Soft solder
all around
Solder center
conductor to
contact
Press cap in
until seated
Cap
Insulator
(if supplied)
1) Trim cable as shown.
Remove any burrs
from jacket and
center conductor.
2) Soft solder cable jacket to body, making sure
that end of cable is flush with step in body.
Solder center conductor into contact slot,
assemble insulator disc (if supplied), then press
cap into body until seated or screw into place.
Trim Codes
Code AB
J/01 .109 .047
J/02 .059 .039
J/03 .059 .079
J/04 .050 .059
Solder
.015"
Crimp or solder sleeve
Cable dielectric end
Heat-shrink tubing
Crimp or solder sleeve
Solder hole
(for solder-type
connectors only)
A
Heat-shrink tubing
(if supplied)
B C
1) Trim cable per chart. Slide crimp (or
solder) sleeve and heat-shrink tubing
(if supplied) back onto cable.
2) Solder contact onto center conductor, fixturing to
maintain gap as shown. Flare cut end of braid slightly
by rotating dielectric.
3) Insert cable/contact into rear of body, with all braid wires on outside
of crimp tail. Push cable in until cable dielectric bottoms in connector.
Trim excess braid wires even with shoulder of body. Slide crimp sleeve
forward until flush with body and crimp (see page 211 for hex die
sizes). (For solder-type connectors, solder braid to body and sleeve
through hole in sleeve.) Slide heat-shrink tubing into place and shrink
with hot-air gun.
Plug body assembly and contact shown; procedure is identical for jack connectors.
Code A B C
K/01 .250 .270 .110
K/02 .200 .270 .140
K/03 .225 .290 .110
K/04 .225 .330 .110
K/05 .250 .330 .110
K/06 .250 .315 .095
Code A B C
K/07 .220 .290 .135
K/08 .420 .620 .090
K/09 .090 .135 .160
K/10 .250 .415 .115
K/11 .250 .400 .150
K/12 .282 .390 .140
Trim Codes
Assembly Procedures
Assembly Procedure J
CAI-J-K
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Assembly Procedure K
Crimp or solder sleeve
Solder hole
(for solder-type connectors)
A
B C
1) Trim cable per chart. Slide crimp
(or solder) sleeve onto cable.
2) Insert cable into rear of body, with all braid wires on outside of crimp tail. Push
cable in until end of braid touches connector body shoulder and center conductor
rests in contact slot.
Slide crimp sleeve forward until flush with body and crimp (see page 211 for hex
die sizes). (For solder-type connectors, solder braid to body and sleeve through
hole in sleeve.)
Solder center conductor into contact slot, assemble insulator disc (if supplied),
then press cap into body until seated or screw into place.
Crimp or solder sleeve
Solder center
conductor to
contact
Press cap in
until seated
Cap
Insulator
(if supplied)
Backnut
Contact
Insulator
Clamp
A
B C
Crimp or solder sleeve
Solder hole
(for solder-type connectors)
Solder
1) Trim cable per chart.
Slide crimp (or solder)
sleeve and backnut
onto cable.
2) Flare cut end of braid slightly by rotating dielectric. Insert cable into rear of clamp, with all
braid wires on outside of crimp tail.Slide insulator over cable dielectric until it is flush with front
of clamp, and cable insulation bottoms inside insulator. Slide contact onto center conductor,
with contact shoulder flush with front of insulator. Solder contact to center conductor.
3) Slide crimp sleeve forward until flush with clamp shoulder; crimp as close to shoulder as
possible. (see page 211 for hex die sizes). (For solder-type connectors, solder braid to body
and sleeve through hole in sleeve.)
4) Insert prepared cable into back of body. Slide nut forward and tighten to 12–15 inch-pounds.
Cable Trim Codes
Code A B C
M/01 .281 .390 .140
Frame only—P/N M22520/5-01 —Use with interchangeable dies listed below.
Cable Group* Hex Die Size Die Set P/N Closure
2, 3, 4 .429 hex, .400 wide M22520/5-61 A
5, 6 .213 hex, .400 wide M22520/5-19 B
7 .255 hex, .400 wide M22520/5-19 A
9 .128 hex, .400 wide M22520/5-35 B
10 .151 hex, .400 wide M22520/5-37 B
11 .105 hex, .400 wide M22520/5-33 B
M22520/5-01
Trim Codes
Code A B C
L/01 .250 .438 .109
L/02 .125 .219 .109
L/03 .234 .344 .109
L/04 .195 .270 .050
L/05 .095 .155 .050
L/06 .281 .390 .070
* For Delta cable groups. See MIL-PRF-39012
specifications for dies sizes used with
M39012 cable groups.
Assembly Procedures
Assembly Procedure L
CAI-L-M
Delta Electronics Mfg. Corp.
deltarf.com 978-927-1060 sales@deltarf.com
Assembly Procedure M
Crimp Tools For Flexible Cable