TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 NPN POWER SWITCHING SILICON TRANSISTOR Qualified per MIL-PRF-19500/374 DEVICES LEVELS 2N3996 2N3997 2N3998 2N3999 JAN JANTX JANTXV ABSOLUTE MAXIMUM RATINGS (TC = +25C unless otherwise noted) Parameters / Test Conditions Symbol Value Unit Collector-Emitter Voltage VCEO 80 Vdc Collector-Base Voltage VCBO 100 Vdc Emitter-Base Voltage VEBO 8.0 Vdc IB 0.5 Adc Base Current Collector Current Total Power Dissipation IC (2) @ TA = +25C @ TC = +100C (3) Operating & Storage Junction Temperature Range 10 (1) Adc PT 2.0 30 W TJ, Tstg -65 to +200 C 3.33 C/W Thermal Resistance, Junction-to-Case RJC Note: (1) This value applies for Tp 1.0ms, duty cycle 50% (2) Derate linearly 11.4 mW/C for TA > +25C (3) Derate linearly 300 mW/C for TC > +100C TO-111 2N3996, 2N3997 ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted) Parameters / Test Conditions Symbol Min. Max. Unit Collector-Emitter Breakdown Voltage IC = 50mAdc V(BR)CEO 80 Vdc Collector-Emitter Breakdown Voltage IC = 10Adc V(BR)CBO 100 Vdc OFF CHARACTERTICS Collector-Emitter Cutoff Current VCE = 60Vdc ICEO 10 Adc Collector-Emitter Cutoff Current VCE = 80Vdc, VBE = 0V ICES 200 Adc Emitter-Base Cutoff Current VEB = 5.0Vdc VEB = 8.0Vdc IEBO 200 10 Adc Adc T4-LDS-0165 Rev. 1 (100688) TO-59 2N3998, 2N3999 Page 1 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 ELECTRICAL CHARACTERISTICS (TA = +25C, unless otherwise noted) Parameters / Test Conditions ON CHARACTERISTICS Symbol Min. Max. 120 hFE 30 40 15 60 80 20 240 Unit (2) Forward-Current Transfer Ratio IC = 50mAdc, VCE = 2.0Vdc IC = 1.0Adc, VCE = 2.0Vdc IC = 5.0Adc, VCE = 5.0Vdc IC = 50mAdc, VCE = 2.0Vdc IC = 1.0Adc, VCE = 2.0Vdc IC = 5.0Adc, VCE = 5.0Vdc 2N3996, 2N3998 2N3997, 2N3999 Collector-Emitter Saturation Voltage IC = 1.0Adc, IB = 0.1Adc IC = 5.0Adc, IB = 0.5Adc VCE(sat) Base-Emitter Saturation Voltage IC = 1.0Adc, IB = 0.1Adc IC = 5.0Adc, IB = 0.5Adc VBE(sat) Symbol 0.25 2.0 Vdc 0.6 1.2 1.6 Vdc Min. Max. Unit 3.0 12 DYNAMIC CHARACTERISTICS Parameters / Test Conditions Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 1.0Adc, VCE = 5.0Vdc, f = 10MHz Output Capacitance VCB = 10Vdc, IE = 0, 100kHz f 1.0MHz |hfe| Cobo 150 pF SAFE OPERATING AREA DC Tests TC = +100C, 1 Cycle, t = 1.0s Test 1 VCE = 80Vdc, IC = 0.08Adc Test 2 VCE = 20Vdc, IC = 1.5Adc (4) Pulse Test: Pulse Width = 300s, Duty Cycle 2.0%. T4-LDS-0165 Rev. 1 (100688) Page 2 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 PACKAGE DIMENSIONS Ltr CH A1 CD CD1 HF PS PS1 HT OAH UD SL SU T T1 SD Z Z1 Dimensions Millimeters Inches Min Max Min Max .345 .400 8.76 10.16 .250 6.35 .370 .437 9.40 11.10 .318 .380 8.08 9.65 .424 .437 10.77 11.10 .180 .215 4.57 5.46 .080 .110 2.03 2.79 .090 .140 2.29 3.56 .575 .675 14.61 17.15 .155 .189 3.94 4.80 .400 .455 10.16 11.56 .078 1.98 .040 .065 1.02 1.65 .040 .065 1.02 1.65 .190-32 UNF-2A .002 0.05 .006 0.15 Notes 3 3 5 5 2, 6 1 7 4 8 NOTES: 1. Terminal 1, emitter; terminal 2, base; terminal 3, collector; terminal 4, case. 2. Chamfer or undercut on one or both ends of hexagonal portion is optional. 3. The outline contour with the exception of the hexagon is optional within cylinder defined by CD1 and A1. 4. Terminal r can be flattened and pierced or hook type. A visual index is required when the flattened and pierced tab terminal contour (identical to the adjacent terminals) option is used. The case terminal (hook) is mechanically connected to the case. The other three terminals shall be electrically isolated from the case. 5. Angular orientation of terminals with respect to hexagon is optional. 6. HT dimension does not include sealing flanges. 7. SU is the length of incomplete or undercut threads. 8. SD is the pitch diameter of coated threads. Reference: Screw threads standards for Federal Service Handbook H28, part I. 9. Dimensions are in inches. * 10. Millimeters are giving for general information only. * 11. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. * FIGURE 1. Physical dimensions for transistor types 2N3996 and 2N3997 - Continued. T4-LDS-0165 Rev. 1 (100688) Page 3 of 4 TECHNICAL DATA SHEET 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 / (978) 620-2600 / Fax: (978) 689-0803 Website: http: //www.microsemi.com Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Ltr CH A1 CD1 CD HF PS PS1 PS2 PS3 HT OAH UD SL SU T T1 SD Dimensions Millimeters Inches Min Max Min Max .345 .400 8.76 10.16 .250 6.35 .318 .380 8.08 9.65 .370 .437 9.40 11.10 .424 .437 10.77 11.10 .125 .165 3.18 4.19 .110 .145 2.79 3.68 .090 .140 2.29 3.56 .185 .215 4.70 5.46 .090 .140 2.29 3.56 .575 .675 14.61 17.15 .155 .189 3.94 4.80 .400 .455 10.16 11.56 .078 1.98 .040 .065 1.02 1.65 .040 .065 1.02 1.65 .190-32 UNF-2A Notes 4, 7, 8 4, 7 4, 7, 8 4, 7, 8 5 9 3 NOTES: 1. Dimensions are in inches. Millimeters are given for general information only 2. Collector shall be electrically connected to the case. This terminal may be flattened and pierced only when the 90 degree option is used. 3. SD is the pitch diameter of coated threads. Reference: Screw thread standards for Federal Service Handbook H28, part I. 4. The orientation of the terminals in relation to the hex flats is not controlled. 5. All three terminals. 6. The case temperature may be measured anywhere on the seating plane within .125 (3.18 mm) of the stud. 7. Terminal spacing measured at the base seat only. 8. Dimensions PS, PS1, PS2, and PS3 are measured from the centerline of terminals. 9. Maximum unthreaded dimension. 10. This dimension applies to the location of the center line of the terminals. 11. A 90 degree angle lead orientation as shown may be used at the option of the manufacturer. All dimensions of the basic outline except PS, PS1, and the 120 lead angle apply to this option. 12. Terminal 1, emitter; terminal 2, base; terminal 3, collector. 13. A slight chamfer or undercut on one or both ends of the hexagonal is optional. * 14. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. * FIGURE 2. Physical dimensions for transistor types 2N3998 and 2N3999 T4-LDS-0165 Rev. 1 (100688) Page 4 of 4