ACTIVE DELAY LINES, 5-TAP & 10-TAP
THROUGH-HOLE & SURFACE MOUNT
A08 SERIES: 8-Pin DIP
A14 SERIES: 14-Pin DIP
SA08 SERIES: 8-Pin SIP
SMA14 SERIES: 14-Pin SO
OPTIONS
Opt.T= trailing edge design
Opt. F =fast TTL, H =HCMOS, C =FACT
Opt.A = auto-insertable design
Opt.ER = -55 to +125°C operating temp.
Opt.39 = -40 to +85°C operating temp.
Tighter tolerances, faster rise times
Military screening
FA078A Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
TEST CONDITIONS @25°C
1.) Input test pulse voltage: 3.2V
2.) Input pulse width: 50nS or 1.2x the
total delay (whichever is greater)
3.) Input rise time: 2.0nS (0.75V to 2.4V)
4.) Delay measured at 1.5V on leading
edge only with no loads on output
(specify opt. T for trailing edge design)
5.) Supply V oltage (Vcc): 5V
6.) Pulse spacing: 2x pulse width min.
RESISTORSCAPACITOR
S
C
OILSDELAY
LINES
SPECIFICATIONS
Operating Temp: 0 to 70°C (opt.39= -40 to
+85°C, opt.ER= -55 to +125°C)
Rise Time: 4nS max.
Delay Tol: ±2nS or ±5%, whichever greater
Tap Tol: ±2nS or 5%, whichever greater
Peak Soldering Temp: +230°C
epyTDCRegnaRyaleD fo.oN spaT yaleD paTrep
5080ASn005-Sn025T%02D
GA5080A Sn005-Sn025T%02D
5041A Sn0001-Sn025T%02D
GA5041A Sn0001-Sn025T%02D
0141ASn0001-Sn0501T%01D
GA0141ASn0001-Sn0501T%01D
5080ASSn005-Sn025T%02D
5041AMSSn052-Sn025T%02D
CHARACTERISTICS
Economical cost
A1405 popular values from stock!
Wide selection, 20 - 1000nS
Choice of 5 or 10 equally spaced taps
TTL Schottky interfaced, TTL &DTL compatible
TOT AL-DELA Y TIMES (TD)
20nS, 25nS, 30nS, 40nS, 45nS, 50nS,
60nS, 75nS, 100nS, 125nS, 150nS,
200nS, 250nS, 300nS, 350nS, 400nS,
450nS, 500nS, 750nS, 1000nS
(popular values listed in bold. Intermediate and
extended range values available on special order).
.340
[8.64]
Max.
.150
[3.81]
← .810 [20.6] Max. →
→ ←→ ←
→ ←→ ←
→ ← .100
[2.54]
→ ←→ ←
→ ←→ ←
→ ←
.018
[.457] .010
[.25]
→ ←
.180
[4.5] max
→ ←→ ←
→ ←→ ←
→ ← R
IN2
1
8
GND
VCC 3 4 5 6 7 OUT
Type SA0805 (5-tap, 8-pin SIP) SA0805 Schematic
R CD
A0805AG
1 50NS
.800 [20.3] Max
RCD’s active delay lines have been designed to provide precise tap delays with all the
necessary drive and pick-off circuitry. All inputs/outputs are schottky-type, requiring no
additional components to achieve specified delays. Units are 100% inspected.
Excellent for applications requiring high delay stability, fast rise times and no jitter, such
as memory boards, disk drives, and signal processing. Application Guide available.
Most popular models are listed in boldface. A1405AG is
most popular SM model, A1405 is most popular thru-hole.
RC D
A1410AG
1 100NS
← .505 [12.8] Max →
→ ←→ ←
→ ←→ ←
→ ←
.050 [1.27].020 [.5]
→ ←→ ←
→ ←→ ←
→ ←
TOP VIEW
14 12 10 8
1 4 6 7
.375 [9.53] max
.280 [7.1 1]
.300 [7.6]
.250
[6.35]
12 4 10 6 8 OUT
R
IN1
14
7
GND
VCC
Type SMA1405 (5-tap, 14-pin SO) SMA1405 Schematic
RCD C omponents Inc, 520 E.Industrial Park Dr, Mancheste r, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
109
A0805 - 100NS - B W
P/N DESIGNA TION:
Termination: W=Lead-free, Q=Tin/Lead (leave blank if either is acceptable)
Type: A0805, A0805AG, A1405, A1405AG,
A1410, A1410AG , SMA1405, SA0805
Delay Time: 20NS, 25NS, 100NS, etc.
Packaging: B=Bulk (magazine tube std),T=Tape &Reel (SM1405 only)
Options: T, H, F , ER, C, A, 39 (leave blank if s td.)
Type A0805 (5-tap, 8-pin DIP)
.120 [3] Min
.250
[6.35]
→ ←.100 [2.54]
↑
↓
.300 ±.01
[7.62±.25]
.300±.01
[7.6±.25]
.40 [10.2]Max.500 [12.7] Max
SIDE
SIDE VIEW
TYPE A0805AG (5-tap,8-pin SM)
.10 [2.54]
→ ←→ ←
→ ←→ ←
→ ←
.020 [.5]
TOP VIEW
→ ←→ ←
→ ←→ ←
→ ←
4
5
.500 [12.7] Max
1
8
A0805 Schematic
R
IN1
8
4
GND
VCC 7 2 6 3 5 OUT
.250
[6.35]
.420 [10.67] max
.285 [7.24]
.300 [7.6]
←→
Type A1405 (5-tap,14-pin DIP) Type A1405AG (5-tap,14-pin SM)
.12 [3] min
.295 [7.5]
max.
→ ←.10 [2.54]
←.800 [20.3] Max. →↑
↓
.600 ± .010
[15.2 ± .25]
← → .300±.01
[7.6±.25]
.40 [10.2] max
SIDE VIEW
.10 [2.54]
→ ←→ ←
→ ←→ ←
→ ←
.020 [.5]
→ ←→ ←
→ ←→ ←
→ ←
TOP VIEW
14 8
1 7
A1405 Schematic
12 4 10 6 8 OUT
R
IN1
14
7
GND
VCC
.420 [10.67] max
.285 [7.24]
.300 [7.6]
.300
[7.62]
Type A1410 (10-tap,14-pin DIP) Type A1410AG (10-tap,14-pin SM)
.12 [3] min
.295 [7.5]
max.
→ ←.10 [2.54]
←.800 [20.3] Max. →↑
↓
.600 ± .010
[15.2 ± .25]
← → .300±.01
[7.6±.25]
.40 [10.2] max
SIDE VIEW
.10 [2.54]
→ ←→ ←
→ ←→ ←
→ ←
.020 [.5]
← .800 [20.3] Max →
→ ←→ ←
→ ←→ ←
→ ←
TOP VIEW
14 8
1 7 .300
[7.62]
A1410 Schematic
13 3 12 4 11 5 10 6 9 8
R
IN1
14
7
GND
VCC
.420 [10.67] max
.285 [7.24]
.300 [7.6]
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
