ALUMINUM ELECTROLYTIC CAPACITORS NR Screw Terminal Type, 85C Standard series Load life of 5000 hours application of rated ripple current at 85C. Extended rarge up to 100 x 250L size. NT Compliant to the RoHS directive (2011/65/EU). High Temperature NY High Voltage NR Specifications Item Performance Characteristics Category Temperature Range - 40 to +85C (10 to 100V) , - 25 to +85C (160 to 250V) Rated Voltage Range 10 to 250V Rated Capacitance Range 1000 to 2200000F Capacitance Tolerance 20% at 120Hz, 20C Leakage Current After 5 minutes' application of rated voltage, leakage current is not more than 3 CV (A) or 5 mA, whichever is smaller (at 20C) . [C:Rated Capacitance (F) , V:Voltage(V)] 3 CV D L 35 51 Tangent of loss angle (tan ) (MAX) 63.5 76.2 90 100 3 CV V 80 to 100 120 70 to 100 120 to 140 100 120 to 140 100 120 to 140 140 to 220 250 10 0.6 0.7 0.9 1.0 0.9 1.2 1.6 1.6 2.0 2.4 16 0.4 0.55 0.6 0.8 -- 0.75 -- 1.1 1.5 1.5 25 0.35 0.4 0.45 0.5 -- 0.65 -- 0.75 1.0 1.0 Impedance ratio 50 0.25 0.25 0.25 0.3 0.35 -- -- 0.55 0.75 0.75 63 0.25 0.25 0.25 0.25 0.3 0.3 -- 0.5 0.6 0.6 ZT/Z20(MAX.) 80 0.2 0.2 0.2 0.2 0.25 0.3 -- 0.35 0.4 0.4 100 0.12 0.15 0.15 0.15 -- 0.2 -- 0.3 0.3 0.3 160 to 250 Measurement frequency: 0.15 120Hz at 20C 0.15 0.15 0.15 0.2 0.2 0.2 0.2 0.25 0.25 Measurement frequeny : 120Hz 160 to 250 Z - 25C / Z+20C 8 10 to 100 Z - 40C / Z+20C 12 Rated voltage(V) Stability at Low Temperature 35 0.3 0.3 0.35 0.4 0.5 -- 0.65 0.75 0.9 0.9 Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after D.C. bias plus rated ripple current is applied for 5000 hours at 85C, the peak voltage shall not exceed the rated voltage. Capacitance change tan Leakage current Within 15% of the initial capacitance value 175% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the requirements listed at right. Capacitance change tan Leakage current Within 20% of the initial capacitance value 175% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with black color letter on light blue sleeve. Drawing Type numbering system (Example : 250V 2200F) 1 35 Screw terminal type 2 3 4 5 6 Hexagenal headed bolt (M5) Bottom plate 8 9 10 11 12 Mounting bracket Configuration Sleeve Capacitance tolerance (20%) 3.5 + 24 150.5 61 Rated capacitance (2200F) 291 Rated voltage (250V) 10 451 30 12.71 10 35 +2MAX. Pressure relief vent L+3MAX. 7 L NR 2 E 2 2 2 M S E Series name 7 Type Configuration Cr (III) Plating (RoHS compliant) ( 35) Code less 2-leg brackets No brackets N ( 51 to 90) Code less 3-leg brackets 2-leg brackets B No brackets N ( 100) Code less 3-leg brackets No brackets N SE Please refer to page 328 for schematic of dimensions. Please contact to us if PVCless products are required. Dimension table in next page. CAT.8100D W1 D + 2 MAX. h H1 series Screw terminal types for 51 and larger Sleeve 0 12 1 3-leg brackets for 90 capacitors have different hole shapes from the Pressure relief vent W1 D + 2 MAX. P S T P2 B 7 5 h MAX. P ordinary ones as illustrated below. P H1 L+ U S B T Hexagenal headed bolt MAX. 5 Bottom plate L+ U A2 A2 NR S ALUMINUM ELECTROLYTIC CAPACITORS Configuration ( 35) Code less 2-leg brackets No brackets N Rated Capacitance (2200F) ( 51~ 100) Rated voltage (250V) Code less 3-leg brackets 2-leg brackets T B P2 Series name B UN No brackets A2 Type Capacitance tolerance (20%) Pressure relief vent 30 7 1 Note: Capacitors with body dia. 51 or larger are furnished with 3-leg brackets shown above as standard. If these capacitors are preferred to have 2-leg brackets as shown right, add "B" in the 12th digit of type numbering system. Dimension of terminal pitch (W) and length (R) and Nominal dia.of bolt D W R 51.5 22.0 6 63.5 28.6 6 76.2 31.8 6 90.5 31.8 6 100.50 41.5 10 (mm) Nominal dia.of bolt 3 3 3 3 4 M5 M5 M5 M5 M8 Dimensions of mounting bracket D (mm) 3-Legs Leg Shape 2-Legs 51 63.5 76.2 90 100 51 63.5 76.2 90 P 32.5 38.1 44.5 50.8 56.3 33.2 40.5 46.5 53 A 38.5 43 49.2 58.5 62 40 46.5 53 59 T 7.5 8.0 7.0 8.0 8.0 6.0 7.0 6.0 6.0 S 5.0 5.0 5.0 5.0 5.0 4.5 4.5 4.5 4.5 U 12 14 14 18 16 14 14 14 14 60 60 60 60 60 30 30 30 30 H 20 25 30 35 36 25 35 35 35 h 15 20 24 25 30 15 20 20 20 Symbol Dimensions 10V (1A) Cap. (F) Size Rated ripple D x L(mm) (Arms) tan 16V (1C) Leakage Current (mA) Code Cap. (F) Size Rated ripple D x L(mm) (Arms) tan Leakage Current (mA) Code 47000 35 x 80 6.0 0.60 2.05 LNR1A473MSE 47000 35 x 80 06.4 0.40 2.60 LNR1C473MSE 68000 35 x 80 7.2 0.60 2.47 LNR1A683MSE 68000 35 x 100 07.9 0.40 3.12 LNR1C683MSE 100000 35 x 100 8.8 0.60 3.00 LNR1A104MSE 100000 35 x 120 10.6 0.55 3.79 LNR1C104MSE 150000 51 x 80 10.7 0.90 3.67 LNR1A154MSE 150000 51 x 100 11.5 0.60 4.64 LNR1C154MSE 220000 51 x 100 13.0 0.90 4.44 LNR1A224MSE 220000 51 x 120 15.6 0.80 5.00 LNR1C224MSE 330000 63.5 x 100 15.9 0.90 5.00 LNR1A334MSE 330000 63.5 x 120 25.1 0.75 5.00 LNR1C334MSE 470000 63.5 x 120 19.0 1.20 5.00 LNR1A474MSE 470000 76.2 x 120 30.5 1.10 5.00 LNR1C474MSE 680000 76.2 x 120 22.8 1.60 5.00 LNR1A684MSE 680000 90 x 170 33.0 1.50 5.00 LNR1C684MSE 1000000 90 x 170 27.7 2.00 5.00 LNR1A105MSE 1000000 90 x 220 36.0 1.50 5.00 LNR1C105MSE 1500000 90 x 220 33.9 2.00 5.00 LNR1A155MSE 1500000 100 x 250 39.7 1.50 5.00 LNR1C155MSE 2200000 100 x 250 41.1 2.40 5.00 LNR1A225MSE Rated ripple current (Arms) at 85C 120Hz CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS NR series Dimensions 25V (1E) Cap. (F) Size Rated ripple D x L(mm) (Arms) tan 35V (1V) Leakage Current (mA) Code Cap. (F) Size Rated ripple D x L(mm) (Arms) tan Leakage Current (mA) Code 33000 35 x 80 6.2 0.35 2.72 LNR1E333MSE 33000 35 x 80 6.2 0.30 3.22 LNR1V333MSE 47000 35 x 100 8.2 0.35 3.25 LNR1E473MSE 47000 35 x 120 8.2 0.30 3.84 LNR1V473MSE 68000 35 x 120 9.4 0.40 3.91 LNR1E683MSE 68000 51 x 80 9.3 0.35 4.62 LNR1V683MSE 100000 51 x 100 12.0 0.45 4.74 LNR1E104MSE 100000 51 x 120 13.6 0.40 5.00 LNR1V104MSE 150000 51 x 120 15.3 0.50 5.00 LNR1E154MSE 150000 63.5 x 100 14.5 0.50 5.00 LNR1V154MSE 220000 63.5 x 120 18.9 0.65 5.00 LNR1E224MSE 220000 76.2 x 100 16.8 0.65 5.00 LNR1V224MSE 330000 76.2 x 120 24.8 0.75 5.00 LNR1E334MSE 330000 76.2 x 140 24.8 0.75 5.00 LNR1V334MSE 470000 90 x 170 30.8 1.00 5.00 LNR1E474MSE 470000 90 x 170 32.6 0.90 5.00 LNR1V474MSE 680000 90 x 220 33.3 1.00 5.00 LNR1E684MSE 680000 90 x 220 35.2 0.90 5.00 LNR1V684MSE 1000000 100 x 250 36.4 1.00 5.00 LNR1E105MSE 1000000 100 x 250 38.5 0.90 5.00 LNR1V105MSE Code Cap. (F) 50V (1H) Cap. (F) Size Rated ripple D x L(mm) (Arms) tan 63V (1J) Leakage Current (mA) Size Rated ripple D x L(mm) (Arms) tan Leakage Current (mA) Code 15000 35 x 80 5.4 0.25 2.59 LNR1H153MSE 10000 35 x 80 4.1 0.25 2.38 LNR1J103MSE 22000 35 x 100 6.1 0.25 3.14 LNR1H223MSE 15000 35 x 100 5.5 0.25 2.91 LNR1J153MSE 33000 51 x 70 7.0 0.25 3.85 LNR1H333MSE 22000 35 x 120 7.1 0.25 3.53 LNR1J223MSE 47000 51 x 90 8.6 0.25 4.59 LNR1H473MSE 33000 51 x 80 8.8 0.25 4.32 LNR1J333MSE 68000 51 x 100 11.0 0.25 5.00 LNR1H683MSE 47000 51 x 120 11.7 0.25 5.00 LNR1J473MSE 100000 63.5 x 100 14.2 0.35 5.00 LNR1H104MSE 68000 63.5 x 100 15.0 0.30 5.00 LNR1J683MSE 150000 76.2 x 120 18.6 0.55 5.00 LNR1H154MSE 100000 63.5 x 140 20.8 0.30 5.00 LNR1J104MSE 220000 90 x 140 20.3 0.75 5.00 LNR1H224MSE 150000 76.2 x 140 26.0 0.50 5.00 LNR1J154MSE 330000 90 x 170 25.3 0.75 5.00 LNR1H334MSE 220000 90 x 170 28.3 0.60 5.00 LNR1J224MSE 470000 90 x 220 33.2 0.75 5.00 LNR1H474MSE 330000 90 x 220 31.2 0.60 5.00 LNR1J334MSE 680000 100 x 250 36.0 0.75 5.00 LNR1H684MSE 470000 100 x 250 33.6 0.60 5.00 LNR1J474MSE Code Cap. (F) 80V (1K) Cap. (F) Size Rated ripple D x L(mm) (Arms) tan 100V (2A) Leakage Current (mA) Size Rated ripple D x L(mm) (Arms) tan Leakage Current (mA) Code 10000 35 x 80 4.2 0.20 2.68 LNR1K103MSE 4700 35 x 80 3.8 0.12 2.05 LNR2A472MSE 15000 35 x 120 6.0 0.20 3.28 LNR1K153MSE 6800 35 x 100 4.5 0.12 2.47 LNR2A682MSE 22000 51 x 80 6.5 0.20 3.97 LNR1K223MSE 10000 35 x 120 5.3 0.15 3.00 LNR2A103MSE 33000 51 x 120 9.2 0.20 4.87 LNR1K333MSE 15000 51 x 80 6.0 0.15 3.67 LNR2A153MSE 47000 63.5 x 100 12.7 0.25 5.00 LNR1K473MSE 22000 51 x 100 6.8 0.15 4.45 LNR2A223MSE 68000 63.5 x 140 15.5 0.30 5.00 LNR1K683MSE 33000 51 x 140 10.0 0.15 5.00 LNR2A333MSE 100000 76.2 x 140 21.3 0.35 5.00 LNR1K104MSE 47000 63.5 x 140 14.4 0.20 5.00 LNR2A473MSE 150000 90 x 170 26.5 0.40 5.00 LNR1K154MSE 68000 76.2 x 140 18.2 0.30 5.00 LNR2A683MSE 220000 90 x 220 28.9 0.40 5.00 LNR1K224MSE 100000 90 x 170 22.1 0.30 5.00 LNR2A104MSE 330000 100 x 250 31.8 0.40 5.00 LNR1K334MSE 150000 90 x 220 27.0 0.30 5.00 LNR2A154MSE 220000 100 x 250 32.7 0.30 5.00 LNR2A224MSE Rated ripple current (Arms) at 85C, 120Hz CAT.8100D ALUMINUM ELECTROLYTIC CAPACITORS NR series Dimensions Cap. (F) 160V (2C) Size Rated ripple tan D x L(mm) (Arms) Leakage Current Code (mA) Cap. (F) 200V (2D) Size Rated ripple tan D x L(mm) (Arms) Leakage Current (mA) Code 2200 35 x 80 3.2 0.15 1.77 LNR2C222MSE 1500 35 x 80 2.9 0.15 1.64 LNR2D152MSE 3300 35 x 120 4.7 0.15 2.17 LNR2C332MSE 2200 35 x 100 3.5 0.15 1.99 LNR2D222MSE 4700 51 x 80 5.0 0.15 2.60 LNR2C472MSE 3300 51 x 80 4.8 0.15 2.43 LNR2D332MSE 6800 51 x 100 6.4 0.15 3.12 LNR2C682MSE 4700 51 x 100 6.3 0.15 2.90 LNR2D472MSE 10000 63.5 x 100 9.1 0.20 3.79 LNR2C103MSE 6800 51 x 140 7.3 0.15 3.49 LNR2D682MSE 15000 76.2 x 100 12.0 0.20 4.64 LNR2C153MSE 10000 63.5 x 120 9.8 0.20 4.24 LNR2D103MSE 22000 76.2 x 140 16.9 0.20 5.00 LNR2C223MSE 15000 76.2 x 120 13.0 0.20 5.00 LNR2D153MSE 33000 90 x 140 19.2 0.25 5.00 LNR2C333MSE 22000 90 x 140 15.9 0.25 5.00 LNR2D223MSE 47000 90 x 170 20.6 0.25 5.00 LNR2C473MSE 33000 90 x 170 19.5 0.25 5.00 LNR2D333MSE 68000 90 x 220 22.3 0.25 5.00 LNR2C683MSE 47000 90 x 220 20.9 0.25 5.00 LNR2D473MSE 100000 100 x 250 24.4 0.25 5.00 LNR2C104MSE 68000 100 x 250 22.6 0.25 5.00 LNR2D683MSE Cap. (F) 250V (2E) Size Rated ripple tan D x L(mm) (Arms) Leakage Current Code (mA) 1000 35 x 80 2.4 0.15 1.50 LNR2E102MSE 1500 35 x 100 3.0 0.15 1.83 LNR2E152MSE 2200 51 x 80 4.0 0.15 2.22 LNR2E222MSE 3300 51 x 100 5.4 0.15 2.72 LNR2E332MSE 4700 63.5 x 100 7.3 0.20 3.25 LNR2E472MSE 6800 63.5 x 120 8.9 0.20 3.91 LNR2E682MSE 10000 76.2 x 120 11.8 0.20 4.74 LNR2E103MSE 15000 90 x 140 16.4 0.25 5.00 LNR2E153MSE 22000 90 x 170 17.9 0.25 5.00 LNR2E223MSE 33000 90 x 220 19.7 0.25 5.00 LNR2E333MSE 47000 100 x 250 21.2 0.25 5.00 LNR2E473MSE Rated ripple current (Arms) at 85C, 120Hz Frequency coefficient of rated ripple current Frequency (Hz) Coeff. 10 to 100V 160 to 250V 60 0.90 0.88 120 1.00 1.00 360 1.08 1.08 1k 1.15 1.15 10k or more 1.15 1.20 CAT.8100D Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Nichicon: LNR1K223MSE LNR1J473MSM LNR2A223MSM LNR1K223MSM LNR1H153MSM LNR1K104MSE LNR2A683MSE LNR1A104MSE LNR1A105MSE LNR1A154MSE LNR1A155MSE LNR1A224MSE LNR1A225MSE LNR1A334MSE LNR1A473MSE LNR1A474MSE LNR1A683MSE LNR1A684MSE LNR1C104MSE LNR1C105MSE LNR1C154MSE LNR1C155MSE LNR1C224MSE LNR1C334MSE LNR1C473MSE LNR1C474MSE LNR1C683MSE LNR1C684MSE LNR1E104MSE LNR1E105MSE LNR1E154MSE LNR1E224MSE LNR1E333MSE LNR1E334MSE LNR1E473MSE LNR1E474MSE LNR1E683MSE LNR1E684MSE LNR1H104MSE LNR1H153MSE LNR1H154MSE LNR1H223MSE LNR1H224MSE LNR1H333MSE LNR1H334MSE LNR1H473MSE LNR1H474MSE LNR1H683MSE LNR1H684MSE LNR1J103MSE LNR1J104MSE LNR1J154MSE LNR1J223MSE LNR1J224MSE LNR1J333MSE LNR1J334MSE LNR1J474MSE LNR1J683MSE LNR1K103MSE LNR1K153MSE LNR1K154MSE LNR1K224MSE LNR1K333MSE LNR1K334MSE LNR1K473MSE LNR1K683MSE LNR1V104MSE LNR1V105MSE LNR1V154MSE LNR1V224MSE LNR1V333MSE LNR1V334MSE LNR1V473MSE LNR1V474MSE LNR1V683MSE LNR1V684MSE LNR2A103MSE LNR2A104MSE LNR2A153MSE LNR2A154MSE LNR2A223MSE LNR2A224MSE LNR2A333MSE LNR2A472MSE LNR2A473MSE LNR2A682MSE LNR2C103MSE LNR2C104MSE LNR2C153MSE LNR2C222MSE LNR2C223MSE LNR2C332MSE LNR2C333MSE LNR2C472MSE LNR2C473MSE LNR2C682MSE LNR2C683MSE LNR2D103MSE LNR2D152MSE LNR2D153MSE