3M Pak 100 Thru-Board Socket .100 and .100 x .100 Straight, Solder Tails 929 Series S 3-40 contacts on one row, 4-80 on two row S Single hole board preparation simplifies board layout S No solder mask preparation speeds manufacturing assembly S Top mounting allows single pass for wave soldering Date Modified:May 30, 2003 TS-0814-02 Sheet 1 of 2 Physical Insulation Material: Flammability: Color: Contact Material: Plating Underplating and U-Slot: Wiping Area Options: Solder Tails: Glass Filled Polyester (PET) UL 94V-0 Gray Copper Alloy 100 [ 2.54 m ] Nickel -- QQ-N-290, Class 2 See Ordering Information 100 [ 2.54 m ] Tin Lead -- MIL-P-81728 Electrical Current Rating: 2 A Insulation Resistance: > 1 x 109 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: - 55C to 105C UL File No.: E68080 3 Interconnect Solutions http://www.3M.com/interconnects/ 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3M Pak 100 Thru-Board Socket .100 and .100 x .100 Straight, Solder Tails 929 Series .040 Sq Typ [ 1.02 ] A .100 [ 2.54 ] Recommended Solder Flow Direction .100 [ 2.54 ] A .200 [ 5.08 ] +.010 .125 --.005 [ 3.18 ] .040 Sq Typ [ 1.02 ] .235 [ 5.96 ] .09 Ref [ 2.3 ] .130 [ 3.30 ] Integral Solder Mask Plugs (See Note 1) .065 .005 Typ .002 [ 1.65 ] See Note 1 .085 Typ [ 2.16 ] Pad Size .075 Typ [ 1.91 ] Pad Size .160 [ 4.06 ] .060 [ 1.52 ] .100 Ref [ 2.54 ] .025 X .010 Typ [ 0.64 X 0.25 ] .100 .003 [ 2.54 ] .010 .125 .005 [ 3.18 ] .015 [ 0.38 ] .062 [ 1.57 ] Dimension A +0.00 +0 00 [ +0 +0.00 00 ] - .025 [ - .64 ] 0.20 [ 5.08 ] 0.30 [ 7.62 ] 0.40 [ 10.16 ] 0.50 [ 12.70 ] 0.60 [ 15.24 ] 0.70 [ 17.78 ] 0.80 [ 20.32 ] 0.90 [ 22.86 ] 1.00 [ 25.40 ] 1.10 [ 27.94 ] 1.20 [ 30.48 ] 1.30 [ 33.02 ] 1.40 [ 35.56 ] 1.50 [ 38.10 ] 1.60 [ 40.64 ] 1.70 [ 43.18 ] 1.80 [ 45.72 ] 1.90 [ 48.26 ] 2.00 [ 50.80 ] 2.10 [ 53.34 ] 2.20 [ 55.88 ] 2.30 [ 58.42 ] 2.40 [ 60.96 ] 2.50 [ 63.50 ] 2.60 [ 66.04 ] 2.70 [ 68.58 ] 2.80 [ 71.12 ] 2.90 [ 73.66 ] 3.00 [ 76.20 ] 3.10 [ 78.74 ] 3.20 [ 81.28 ] 3.30 [ 83.82 ] 3.40 [ 86.36 ] 3.50 [ 88.90 ] 3.60 [ 91.44 ] 3.70 [ 93.98 ] 3.80 [ 96.52 ] 3.90 [ 99.06 ] 4.0 [ 101.60 ] Contact Quantity Recommended Solder Flow Direction .040 [ 1.02 ] .100 Ref [ 2.54 ] .040 [ 1.02 ] .100 .003 [ 2.54 ] See Note 1 .100 .003 [ 2.54 ] .075 Typ [ 1.91 ] Pad Size Recommended Mounting Hole Pattern .005 .065 .002 Typ [ 1.65 ] .085 Typ [ 2.16 ] Pad Size One Row Two Row 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 50 52 54 56 58 60 62 64 66 68 70 72 74 76 78 80 Notes: 1. It is recommended that the plated thru-hole on the ends be .062 to .063. this will prevent the connector from floating during the wave soldering process. 2. Integral solder mask plugs are removed after soldering by using the 3M Hand Tool 929013 with the 3M Molded Head 929025-0X-XX or 3M Hand Tool 929012 with the 3M Press 929050. 3. Do not hand solder this connector because the solder heat and volume of solder cannot be adequately controlled. This would make the integral plugs difficult or impossible to remove. 4. The connector should be flow soldered such that it enters the solder wave, end first (width). 5. Request tech brief for proper application usage. Inch [mm] Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005 [ ] Dimensions for Reference only Ordering Information 929XXX-01-XX-XX Plating Options: 1 Row 841 = Gold 971 = 100 [ 2.54 m] Tin Lead 3 2 Row 842 = Gold 972 = 100 [ 2.54 m] Tin Lead Interconnect Solutions http://www.3M.com/interconnects/ Contact Quantity: (per row) See Table Gold Plating Thickness: 10 = Wiping Area10 [ 0.25 m ] Gold 30 = Wiping Area 30 [ 0.76 m ] Gold (No entry required for Tin Lead plating) TS-0814-02 Sheet 2 of 2 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of 1 year from the date of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether direct, indirect, special, incidental or consequential regardless of the legal theory asserted. 3 Electronic and Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 www.3M.com/eisd (c) 3M 2003