MODEL INPUT VOLTAGE OUTPUT OUTPUT
RANGE (VDC) VOLTAGE (VDC) CURRENT (AMPS)
CUS509 4.65 - 5.50 9 0.150
CUS512 4.65 - 5.50 12 0.125
CUS515 10.80 - 13.20 15 0.100
CUS1205 10.80 - 13.20 5 0.220
CUS1209 10.80 - 13.20 9 0.150
CUS1212 10.80 - 13.20 12 0.125
CUS1215 10.80 - 13.20 15 0.100
Description
• Industry-standard package
• Industry-standard pinout
• 85°C case operation
• Short-circuit protection
• 5V and 12V inputs
• Input Pi filter
• Low-profile DIP package
• 500V isolation
Features
Dimensions: 1.25” (31.8mm) x 0.80” (20.3mm) x 0.40” (10.2mm)
CUS non-regulated DC/DC converters offer short-circuit
protection and 500 VDC isolation in an industry-standard
DIP package. Available in 5V or 12V input versions, the
CUS is ideal for industrial and EDP applications. Please
see the CUD Series for dual-output applications.
Page 1 of 2
REV. DEC 15, 2003
Model Selection
CUS Single-Output DC-DC Series Data Sheet
1 Watt
Model numbers highlighted in yellow or shaded are not recommended for new designs.
This page is offered as a reference. Consult factory for actual availability of options. When ordering
equipment options, use the following suffix information. Select preferred option(s) and add the suffix to the
model number. Ordering option examples are located below the options table.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president
of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change dependin g on the
date manufactured. Specifications are subject to change without notice.
Page 2 of 2
REV. DEC 15, 2003
OPTIONS
OPTION SUFFIX APPLICABLE SERIES REMARKS
Negative Logic N HAS, HBD, HBS, HES, HLS, HLD, LES, TTL "Low" Turns Module ON
QBS, QES, QLS, TES, TQD TTL "High" Turns Module OFF
Lucent-Compatible Trim T HAS, HBD, HBS, HES, HLS, QBS, QES,
QLS
Trim 1 IAS, LES
Enable 2 IAD, IAS, LES, SMS
Trim and Enable 3 IAS, LES
Pin Length and Heat Sink Options Standard Pin Length is 0.180" (4.6mm)
0.110" (2.8mm) Pin Length 8 All Leaded Models
0.150" (3.8mm) Pin Length 9 All Leaded Models
0.24" (6.1mm) Horizontal Heat Sink 1H All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks Includes Thermal Pad
(Except HLS, HLD, QLS, TLD, and TKD Packages)
0.24" (6.1mm) Vertical Heat Sink 1V All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks Includes Thermal Pad
(Except HLS, HLD, QLS, TLD, and TKD Packages)
0.45" (11.4mm) Horizontal Heat Sink 2H All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks Includes Thermal Pad
(Except HLS, HLD, QLS, TLD, and TKD Packages)
0.45" (11.4mm) Vertical Heat Sink 2V All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks Includes Thermal Pad
(Except HLS, HLD, QLS, TLD, and TKD Packages)
0.95" (24.1mm) Horizontal Heat Sink 3H All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks Includes Thermal Pad
(Except HLS, HLD, QLS, TLD, and TKD Packages)
0.95" (24.1mm) Vertical Heat Sink 3V All 1/4-Bricks, 1/2-Bricks, 3/4-Bricks, Full-Bricks Includes Thermal Pad
(Except HLS, HLD, QLS, TLD, and TKD Packages)
Example Options:
HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent-compatible trim, and 0.95” vertical heat sink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent-compatible trim and 0.110” pin length.
