Patent #: P-2631996 Patented Security: International Approvals: UL # E146370 CSA # LR50370-10 VDE # 57986 SEV # 100989 Protection: Material: Rated Temperature: Seal: Resistant to: Up to 70 PSI Polyamide - flame retardant, self-extinguishing nylon with neoprene bushing -20C to +80C - short term to +100C IP 68 (International Protection - highest grade), comparable to NEMA 6 classification First digit (0-6): Dust Protection Second digit (0-8): Water Protection Salt water, weak acids, weak alcalis, alcohol, ester, ketones, ether, benzene, gas, mineral oil,animal and vegetable oils, gasoline, oil, grease, and common solvents SKINTOP (R) meets the most stringent demands of safety and operational reliability. SKINTOP (R) can be used in panels, switches, control boxes, submersible pumps, appliances and many machine tool applications. SKINTOP (R) is both a strain relief and a liquid tight seal - all in one connector. Complete liquid tightness is achieved with a uniquely designed molded sealing ring and flange nut combined with a neoprene bushing and domed sealing cap. SKINTOP (R) outperforms traditional connectors because the design consists of three parts which do not require dismantling before use. The internal ratchet mechanism allows the cap to be tightened without twisting the cord as it compresses, pushing the collet fingers together to form a liquid-tight seal with the neoprene compression. An integrated locking mechanism that includes and internal ratchet inside the sealing portion of the cord grip provides a self locking and vibration proof element that prevents the cap from loosening even when subjected to severe vibration. The multi-trapezoidal thread requires just one twist to tighten the dome cap - automatically adjusting to the size of the cable and providing optimum strain relief and liquid tight seal. SKINTOP (R) incorporates a heavy duty design that provides greater pull out strength and very reliable strain relief. Larger ergonomic design and ridges in the dome cap provide easy gripping and mounting by hand or wrench. The uniquely designed collet, combined with the optional reducing bushing accomodates a broad range of cords, and cable diameters resulting in a reduction in the number of connectors required in inventory. The SKINTOP (R) can withstand impact at low temperatures of -20C A Lapp Group Company Technical data for assembly PG-Thread DIN 40430 Nominal Thread O d1 O d2 p O d3 PG 7 PG 9 11.28 13.86 12.50 15.20 1.27 1.41 13.0 0.2 15.7 0.2 PG 11 17.26 18.60 1.41 19.0 0.2 19.06 21.16 26.78 35.48 45.48 52.48 57.73 20.40 22.50 28.30 37.00 47.00 54.00 59.30 1.41 1.41 1.588 1.588 1.588 1.588 1.588 PG 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 d1 = core diameter 21.0 23.0 28.8 37.5 47.5 54.5 59.8 0.2 0.2 0.2 0.3 0.3 0.3 0.3 d2 = outside diameter d3 = bore diameter p = pitch Metric thread DIN 46319 M M M M M M M M 12 16 20 25 32 40 50 63 x x x x x x x x Nominal Thread 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 O d1 O d2 p 10.38 14.38 18.38 23.38 30.38 38.38 48.38 61.38 12 16 20 25 32 40 50 63 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 O d3 12.5 16.5 20.5 25.5 32.5 40.5 50.5 64.0 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 Tightening torque values to DIN/VDE 0619, Point 7. The tightening torque values to DIN/VDE 0619 are the torque values for tightening the center sections to achieve Protection Class IP 68-5 bar. Nominal size PG NPT Metal tourque in Nm Polyamide tourque in Nm PG 7 6.25 2.50 PG 9 3/8" 6.25 3.75 PG 11 PG 13.5 PG 16 PG 21 PG 29 PG 36 PG 42 PG 48 1/2" 3/4" 1" 6.25 3.75 6.25 7.50 10.00 10.00 10.00 10.00 10.00 3.75 5.00 7.50 7.50 7.50 7.50 7.50 Shown here are the carefully matched components of the SKINTOP(R) screw-type cable glands. It is precisely these parts which guarantee optimum reliability. Even more: With SKINTOP(R) you can install the cable in an instant. Just feed it in, Turn a nut until tight ready. So your cable is centered, hermetically sealed and completely strain relieved with a turn of the hand. If you do not wish to use your hands, you can of course work with a spanner wrench or Skinmatic RZ tool. Either way, with SKINTOP(R) you can achieve maximum reliability. To ensure that this remains so, SKINTOP(R) quality is continuously monitored. A quality which has brought us a great many international approvals. Click here The familiar PG Standard threads (DIN 46320) were replaced in 2000 with European Standard Metric threads (EN 50262). Only cable glands with Metric connections will be allowed on new production. PG 7 to PG 48 will be replaced by metric sizes M 12 to M 63. This changeover doesn't only affect cable glands, but also all the housing systems and appliances into which cables must be inserted. The German Federation of Electrotechnical and Electrical Industries draws attention to the fact that by March 2001 European Safety Standard EN 50262 must be applied and the present VDE 0619 for glands with PG threads will be withdrawn. EN 50262 is a safety norm, and no longer a construction norm with the function of defining dimensions as did DIN 46319 and DIN 46320. This means that the functions required of a cable gland can be realized without the restrictions prescribed by the DIN specifications. With the introduction of SKINTOP(R) SLM, SL Flex-M and SKINTOP(R) MS-M, Lapp has transposed the requirements of EN 50262 to this new series. The SKINTOP(R) glands of Metric design combine all the advantages of the proven SKINTOP(R) series: simple, rapid and permanent installation with optimal strain relief, plus protection against vibration and sealing in accordance with IP 68 A special feature of the new SKINTOP(R) Metric glands is the large, extended clamping range. This feature makes it easier to assign the gland to the cable OD since instead of 10 PG sizes, there are now only 8 Metric sizes! Naturally we can supply you with the corresponding supplementary cable management products such as SKINTOP(R) DIX multi-cable inserts, SKINTOP(R) GMP-GL M and SKINDICHT(R) SM-M dust seal; SKINTOP(R) DV-M sealing plugs in either plastic or metal, O-Rings, thread adapters and more! A Lapp Group Company Application Information Materials: Body: Polyamide Seal: Neoprene Halogen Free Seals Available on Special Order Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) Temperature Range: -20C to +80C Dimensional Details B D A C E Part Thread UL Pack Maximum Wrenching Description Range Mounting Wrenching Size Overall Thread Nut Number Type Status Hole Flats Length Length Thickness PG Thread Standard Type - Gray S1207 SLR-7 PG-7 R S1107 SL-7 PG-7 R S1209 SLR-9 PG-9 R S1109 SL-9 PG-9 R S1211 SLR-11 PG-11 R S1111 SL-11 PG-11 R S1213 SLR-13 PG-13 L S1113 SL-13 PG-13 L S1216 SLR-16 PG-16 L S1116 SL-16 PG-16 L S1221 SLR-21 PG-21 L S1121 SL-21 PG-21 L .079 .197 .118 .255 .079 .236 .157 .314 .118 .279 .197 .394 .341 .353 .236 .472 .423 .481 .394 .551 .481 .617 .545 .709 .492 1.259 .315 .203 .591 100 .492 1.259 .315 .203 .591 100 .599 1.378 .315 .218 .750 100 .599 1.378 .315 .218 .750 100 .733 1.500 .315 .218 .866 100 .733 1.500 .315 .218 .866 100 .804 1.614 .354 .218 .945 100 .804 1.614 .354 .218 .945 100 .886 1.732 .394 .234 1.063 50 .886 1.732 .394 .234 1.063 50 1.115 1.929 .433 .250 1.299 50 1.115 1.929 .433 .250 1.299 50 S1229 SLR-29 PG-29 R S1129 SL-29 PG-29 R S1236 SLR-36 PG-36 L S1136 SL-36 PG-36 L S1242 SLR-42 PG-42 R S1142 SL-42 PG-42 R S1248 SLR-48 PG-48 L S1148 SL-48 PG-48 L .512 .787 .708 .984 .787 1.023 .866 1.259 .945 1.220 1.259 1.496 1.141 1.378 1.456 1.732 1.457 2.165 .433 .297 1.654 25 1.457 2.165 .433 .297 1.654 25 1.850 2.519 .315 .315 2.087 10 1.850 2.519 .315 .315 2.087 10 2.126 2.638 .360 .360 2.362 5 2.126 2.638 .360 .360 2.362 5 2.335 2.717 .360 .360 2.559 5 2.335 2.717 .360 .360 2.559 5 .492 1.259 .315 .203 .591 100 .492 1.259 .315 .203 .591 100 .599 1.378 .315 .218 .750 100 .599 1.378 .315 .218 .750 100 .733 1.500 .315 .218 .866 100 .733 1.500 .315 .218 .866 100 .804 1.614 .354 .218 .945 100 .804 1.614 .354 .218 .945 100 .886 1.732 .394 .234 1.063 50 .886 1.732 .394 .234 1.063 50 1.115 1.929 .433 .250 1.299 50 1.115 1.929 .433 .250 1.299 50 1.457 2.165 .433 .297 1.654 25 1.457 2.165 .433 .297 1.654 25 1.850 2.519 .315 .315 2.087 10 1.850 2.519 .315 .315 2.087 10 2.126 2.638 .360 .360 2.362 5 2.126 2.638 .360 .360 2.362 5 2.335 2.717 .360 .360 2.559 5 2.335 2.717 .360 .360 2.559 5 PG Thread Standard Type - Black S2207 SLR-7 PG-7 R S2107 SL-7 PG-7 R S2209 SLR-9 PG-9 R S2109 SL-9 PG-9 R S2211 SLR-11 PG-11 R S2111 SL-11 PG-11 R S2213 SLR-13 PG-13 L S2113 SL-13 PG-13 L S2216 SLR-16 PG-16 L S2116 SL-16 PG-16 L S2221 SLR-21 PG-21 L S2121 SL-21 PG-21 L S2229 SLR-29 PG-29 R S2129 SL-29 PG-29 R S2236 SLR-36 PG-36 L S2136 SL-36 PG-36 L S2242 SLR-42 PG-42 R S2142 SL-42 PG-42 R S2248 SLR-48 PG-48 L S2148 SL-48 PG-48 L .079 .197 .118 .255 .079 .236 .157 .314 .118 .279 .197 .394 .295 .353 .236 .472 .423 .481 .394 .551 .481 .617 .545 .709 .551 .827 .708 .984 1.023 1.024 .866 1.259 .945 1.220 1.259 1.496 1.141 1.378 1.456 1.732 * "R" in description indicates reducer bushing. **Locknuts provided with PG sizes. ***Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested. UL Status: R = Recognized; L = Listed Application Information Materials: Body: Polyamide Seal: Neoprene Halogen Free Seals Available on Special Order Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) Temperature Range: -20C to +80C Dimensional Details B D A C E Part Thread UL Pack Maximum Wrenching Description Range Mounting Wrenching Size Overall Thread Nut Number Type Status Hole Flats Length Length Thickness NPT Thread - Standard Type - Black SLRN 9 NPTS2238 R (3/8") 3/8" SLN 9 NPTS2138 R (3/8") 3/8" SLRN 13 NPTS2212 L (1/2") 1/2" SLN 13 NPTS2112 L (1/2") 1/2" SLRN 21 NPTS2234 L (3/4") 3/4" SLN 21 NPTS2134 L (3/4") 3/4" SLRN 29 S2201 NPT-1" L (1") S2101 SLN 29 (1") NPT-1" NPT Thread - Standard SLRN 9 S1238 (3/8") SLN 9 S1138 (3/8") L Type - Gray NPTR 3/8" NPTR 3/8" .079 .236 .157 .314 .295 .353 .236 .472 .481 .617 .545 .709 .551 .827 .708 1.024 .079 .236 .157 .314 .675 1.692 .563 .218 .743 100 .675 1.692 .563 .218 .743 100 .825 1.734 .563 .218 .938 100 .825 1.734 .563 .218 .938 100 1.050 1.969 .563 .250 1.297 50 1.050 1.969 .563 .250 1.297 50 1.303 2.283 .563 .276 1.654 25 1.303 2.283 .563 .276 1.654 25 .675 1.692 .563 .218 .743 100 .675 1.692 .563 .218 .743 100 S1212 S1112 S1234 S1134 S1201 S1101 SLRN 13 (1/2") SLN 13 (1/2") SLRN 21 (3/4") SLN 21 (3/4") SLRN 29 (1") NPT1/2" NPT1/2" NPT3/4" NPT3/4" L L L L NPT-1" L SLN 29 (1") NPT-1" L .295 .353 .236 .472 .481 .617 .545 .709 .551 .827 .708 1.024 .825 1.734 .563 .218 .938 100 .825 1.734 .563 .218 .938 100 1.050 1.969 .563 .250 1.297 50 1.050 1.969 .563 .250 1.297 50 1.303 2.283 .563 .276 1.654 25 1.303 2.283 .563 .276 1.654 25 * "R" in description indicates reducer bushing. **Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested. UL Status: R = Recognized; L = Listed A Lapp Group Company Application Information Materials: Body: Bushing: Polyamide Neoprene Halogen Free Bushings Available on request Color: Black (RAL 9005) Gray (RAL 7001) *Lt Gray (RAL 7035) Available upon request Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) Temperature Range: Static:-20C to +100C Dynamic: -20C to +80C Locknuts: Included Dimensional Details Part Number B D A C E Description Std. Diameter Maximum Wrenching Metric Pack WT/C Mounting Overall Thread Wrenching Nut Range Thread Size Hole Flats Length Length Thickness Metric Thread - Standard Type - Black .138 S2507 SL-M 12x1.5 .276 SLR-M .039 S2607 12x1.5 .197 .177 S2509 SL-M 16x1.5 .394 SLR-M .079 S2609 16x1.5 .276 .276 S2513 SL-M 20x1.5 .512 SLR-M .197 S2613 20x1.5 .394 .354 S2516 SL-M 25x1.5 .669 SLR-M .236 S2616 25x1.5 .512 .433 S2521 SL-M 32x1.5 .827 SLR-M .276 S2621 32x1.5 .591 .47 1.18 .315 .203 .591 100 1.00 .47 1.18 .315 .203 .591 100 1.00 .63 1.34 .315 .218 .748 100 1.50 .63 1.34 .315 .218 .748 100 1.50 .79 1.46 .354 .218 .984 100 2.50 .79 1.46 .354 .218 .984 100 2.50 .98 1.58 .394 .234 1.181 50 3.50 .98 1.58 .394 .234 1.181 50 3.50 1.26 1.85 .394 .250 1.417 25 6.00 1.26 1.85 .394 .250 1.417 25 6.00 .748 1.102 SLR-M .591 S2629 40x1.5 .906 1.063 S2536 SL-M 50x1.5 1.378 SLR-M .866 S2636 50x1.5 1.142 1.339 S2542 SL-M 63x1.5 1.772 SLR-M 1.102 S2642 63x1.5 1.535 Metric Thread - Standard Type - Gray .138 S1507 SL-M 12x1.5 .276 SLR-M .039 S1607 12x1.5 .197 .177 S1509 SL-M 16x1.5 .394 SLR-M .079 S1609 16x1.5 .276 .276 S1513 SL-M 20x1.5 .512 SLR-M .197 S1613 20x1.5 .394 .354 S1516 SL-M 25x1.5 .669 SLR-M .236 S1616 25x1.5 .512 .433 S1521 SL-M 32x1.5 .827 SLR-M .276 S1621 32x1.5 .591 .748 S1529 SL-M 40x1.5 1.102 SLR-M .591 S1629 40x1.5 .906 1.063 S1536 SL-M 50x1.5 1.378 SLR-M .866 S1636 50x1.5 1.142 1.339 S1542 SL-M 63x1.5 1.772 SLR-M 1.102 S1642 63x1.5 1.535 S2529 SL-M 40x1.5 1.57 2.05 .394 .207 1.811 10 10.50 1.57 2.05 .394 .207 1.811 10 10.50 1.97 2.44 .472 .315 2.165 5 17.50 1.97 2.44 .472 .315 2.165 5 17.50 2.48 2.80 .472 .360 2.508 5 25.50 2.48 2.80 .472 .360 2.508 5 25.50 .47 1.18 .315 .203 .591 100 1.00 .47 1.18 .315 .203 .591 100 1.00 .63 1.34 .315 .218 .748 100 1.50 .63 1.34 .315 .218 .748 100 1.50 .79 1.46 .354 .218 .984 100 2.50 .79 1.46 .354 .218 .984 100 2.50 .98 1.58 .394 .234 1.181 50 3.50 .98 1.58 .394 .234 1.181 50 3.50 1.26 1.85 .394 .250 1.417 25 6.00 1.26 1.85 .394 .250 1.417 25 6.00 1.57 2.05 .394 .207 1.811 10 10.50 1.57 2.05 .394 .207 1.811 10 10.50 1.97 2.44 .472 .315 2.165 5 17.50 1.97 2.44 .472 .315 2.165 5 17.50 2.48 2.80 .472 .360 2.508 5 25.50 2.48 2.80 .472 .360 2.508 5 25.50 * "R" in description indicates reducer bushing. ** Locknuts provided with Metric Sizes *** Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested. A Lapp Group Company Application Information Material: Polyolifin Bushing: Color: Viton Black Temperature: -30C to +80C Part Number B D A C E Description Std. Diameter Maximum Wrenching Metric Pack WT/C Mounting Overall Thread Wrenching Nut Range Thread Size Hole Flats Length Length Thickness NPT Thread - Standard Type CRN 9 (3/8") .079 CR2238 w/reducer .236 .157 CR2138 CRN 9 (3/8") .314 CRN 13 .295 CR2212 (1/2") .353 w/reducer CRN 13 .236 CR2112 (1/2") .472 CRN 21 .481 CR2234 (3/4") .617 w/reducer CRN 21 .545 CR2134 (3/4") .709 NPT Thread - Flex Type CRN-FLEX 9 .079 CR2438 (3/8") .236 w/reducer CRN-FLEX 9 .157 CR2338 (3/8") .314 CRN-FLEX 13 .295 CR2412 (1/2") .353 w/reducer CRN-FLEX 13 .236 CR2312 (1/2") .472 CRN-FLEX 21 .481 CR2434 (3/4") .617 w/reducer CRN-FLEX 21 .545 CR2334 (3/4") .709 .675 1.692 .563 .218 .734 100 1.50 .675 1.692 .563 .218 .734 100 1.50 .825 1.734 .536 .218 .938 100 2.00 .825 1.734 .536 .218 .938 100 2.00 1.050 1.969 .536 .250 1.297 50 5.00 1.050 1.969 .536 .250 1.297 50 5.00 .675 3.282 .536 .218 .743 100 3.00 .675 3.282 .536 .218 .743 100 3.00 .825 4.135 .536 .218 .938 50 5.00 .825 4.135 .536 .218 .938 50 5.00 1.050 5.333 .536 .250 1.297 25 12.00 1.050 5.333 .536 .250 1.297 25 12.00 * Nylon Locknut may be ordered separately. **PG sizes available with minimum order. Contact factory for details. Application Information Material: Body: Polymide Bushing: Seal: Neoprene IP 54 Temperature range: -20C to +80C B E F C D A Thread Diameter Maximum Wrenching Part Number Wrenching Overall Flats Type Range Mounting Hole Flats Length Height Length Dome R2207 R2107 R2209 R2109 R2211 R2111 R2213 R2113 R2216 R2116 R2221 R2121 R2229 R2129 R1207 R1107 R1209 R1109 R1211 R1111 R1213 R1113 R1216 R1116 R1221 R1121 R1229 R1129 PG 7 .079 - .236 PG 7 .157 - .315 PG 9 .118 - .276 PG 9 .197 - .394 PG 11 .197 - .354 PG 11 .236 - .472 PG 13 .276 - .472 PG 13 .394 - .551 PG 16 .315 - .472 PG 16 .472 - .669 PG 21 .472 - .630 PG 21 .630 - .827 PG 29 .630 - .827 PG 29 .787 - 1.102 PG 7 .079 - .236 PG 7 .157 - .315 PG 9 .118 - .276 PG 9 .197 - .394 PG 11 .197 - .354 PG 11 .236 - .472 PG 13 .276 - .472 PG 13 .394 - .551 PG 16 .315 - .472 PG 16 .472 - .669 PG 21 .472 - .630 PG 21 .630 - .827 PG 29 .630 - .827 PG 29 .787 - 1.102 .492 .492 .599 .599 .733 .733 .804 .804 .886 .886 1.115 1.115 1.457 1.457 .492 .492 .599 .599 .733 .733 .804 .804 .886 .886 1.115 1.115 1.457 1.457 1.516 1.516 1.850 1.850 2.008 2.008 2.154 2.154 2.421 2.421 2.795 2.795 3.346 3.346 1.516 1.516 1.850 1.850 2.008 2.008 2.154 2.154 2.421 2.421 2.795 2.795 3.346 3.346 1.024 1.024 1.142 1.142 1.244 1.244 1.339 1.339 1.504 1.504 1.799 1.799 2.244 2.244 1.024 1.024 1.142 1.142 1.244 1.244 1.339 1.339 1.504 1.504 1.799 1.799 2.244 2.244 .315 .315 .315 .315 .315 .315 .354 .354 .394 .394 .433 .433 .433 .433 .315 .315 .315 .315 .315 .315 .354 .354 .394 .394 .433 .433 .433 .433 .748 .748 .866 .866 .945 .945 1.063 1.063 1.142 1.142 1.417 1.417 1.811 1.811 .748 .748 .866 .866 .945 .945 1.063 1.063 1.142 1.142 1.417 1.417 1.811 1.811 .591 .591 .748 .748 .866 .866 .945 .945 1.063 1.063 1.299 1.299 1.654 1.654 .591 .591 .748 .748 .866 .866 .945 .945 1.063 1.063 1.299 1.299 1.654 1.654 Application Information Materials: Body: Polyamide Seal: Neoprene Halogen Free Seals Available on Special Order Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) Temperature Range: -20C to +80C Dimensional Details NPT Thread Types B D A C E Part Thread UL Pack Maximum Wrenching Description Range Mounting Wrenching Size Overall Thread Nut Number Type Status Hole Flats Length Length Thickness PG Thread - Flex Type - Black SLR - FLEX S2407 PG-7 7 R S2307 SL - FLEX 7 PG-7 R S2409 SLR - FLEX 9 PG-9 R S2309 SL - FLEX 9 PG-9 R PG-11 R PG-11 R PG-13 L PG-13 L PG-16 L S2411 S2311 S2413 S2313 S2416 SLR - FLEX 11 SL - FLEX 11 SLR - FLEX 13 SL - FLEX 13 SLR - FLEX 16 .079 .197 .118 .255 .079 .236 .157 .314 .118 .279 .197 .394 .295 .353 .236 .472 .423 .481 .492 2.560 .315 .203 .591 100 .492 2.560 .315 .203 .591 100 .599 2.970 .315 .218 .750 100 .599 2.970 .315 .218 .750 100 .733 3.510 .315 .218 .866 100 .733 3.510 .315 .218 .866 100 .804 4.020 .354 .218 .945 50 .804 4.020 .354 .218 .945 50 .886 4.540 .394 .234 1.063 50 SL - FLEX PG-16 16 SLR - FLEX S2421 PG-21 21 SL - FLEX S2321 PG-21 21 NPT Thread - Flex Type - Black SLRN - FLEX NPTS2438 9 (3/8") 3/8" SLN - FLEX NPTS2338 9 (3/8") 3/8" SLRN - FLEX NPTS2412 13 (1/2") 1/2" SLN - FLEX NPTS2312 13 (1/2") 1/2" SLRN - FLEX NPTS2434 21 (3/4") 3/4" SLN - FLEX NPTS2334 21 (3/4") 3/4" PG Thread - Flex Type - Gray SLR - FLEX S1407 PG-7 7 S2316 L L L R R L L L L R S1307 SL - FLEX 7 PG-7 R S1409 SLR - FLEX 9 PG-9 R S1309 SL - FLEX 9 PG-9 R SLR - FLEX PG-11 11 SL - FLEX S1311 PG-11 11 SLR - FLEX S1413 PG-13 13 SL - FLEX S1313 PG-13 13 SLR - FLEX S1416 PG-16 16 SL - FLEX S1316 PG-16 16 SLR - FLEX S1421 PG-21 21 SL - FLEX S1321 PG-21 21 NPT Thread - Flex Type - Gray SLRN - FLEX NPTS1438 9 (3/8") 3/8" SLN - FLEX NPTS1338 9 (3/8") 3/8" SLRN - FLEX NPTS1412 13 (1/2") 1/2" SLN - FLEX NPTS1312 13 (1/2") 1/2" SLRN - FLEX NPTS1434 21 (3/4") 3/4" SLN - FLEX NPTS1334 21 (3/4") 3/4" S1411 R R L L L L L L R R L L L L .394 .551 .481 .617 .545 .709 .079 .236 .157 .314 .295 .353 .236 .472 .481 .617 .545 .709 .079 .197 .118 .255 .079 .236 .157 .314 .118 .279 .197 .394 .295 .353 .236 .472 .423 .481 .394 .551 .481 .617 .545 .709 .079 .236 .157 .314 .295 .353 .236 .472 .481 .617 .545 .709 .886 4.540 .394 .234 1.063 50 1.115 5.293 .433 .250 1.299 25 1.115 5.293 .433 .250 1.299 25 .675 3.282 .563 .218 .743 100 .675 3.282 .563 .218 .743 100 .825 4.135 .563 .218 .938 50 .825 4.135 .563 .218 .938 50 1.050 5.333 .563 .250 1.297 25 1.050 5.333 .563 .250 1.297 25 .492 2.560 .315 .203 .591 100 .492 2.560 .315 .203 .591 100 .599 2.970 .315 .218 .750 100 .599 2.970 .315 .218 .750 100 .733 3.510 .315 .218 .866 100 .733 3.510 .315 .218 .866 100 .804 4.020 .354 .218 .945 100 .804 4.020 .354 .218 .945 100 .886 4.540 .394 .234 1.063 50 .886 4.540 .394 .234 1.063 50 1.115 5.293 .433 .250 1.299 25 1.115 5.293 .433 .250 1.299 25 .675 3.282 .563 .218 .743 100 .675 3.282 .563 .218 .743 100 .825 4.135 .563 .218 .938 100 .825 4.135 .563 .218 .938 100 1.050 5.333 .563 .250 1.297 50 1.050 5.333 .563 .250 1.297 50 1. 2. 3. 4. 5. Locknuts included with PG sizes, but may be ordered separately with NPT thread types. "R" in description indicates reducer bushing. "N" in description indicates NPT thread. All dimensions in inches. Orders of 2000 pieces or more will be bulk packaged unless otherwise requested. UL Status: R = Recognized; L = Listed A Lapp Group Company Application Information Materials: Body: Seal: Polyamide Neoprene Halogen Free Seals Available on request Color: Black (RAL 9005) Gray (RAL 7001) Lt. Gray (RAL 7035) Available upon request Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) Temperature Range: Static: -20C to +100C Dimensional Details Part Number S2707 S2709 S2713 S2716 S2721 S1707 S1709 S1713 S1716 S1721 B D A C E Description Std. Diameter Maximum Wrenching Metric Pack WT/C Mounting Overall Thread Wrenching Nut Range Thread Size Hole Flats Length Length Thickness SL-M FLEX 12X1.5 SL-M FLEX 16X1.5 SL-M FLEX 20X1.5 SL-M FLEX 25X1.5 SL-M FLEX 32X1.5 SL-M FLEX 12X1.5 SL-M FLEX 16X1.5 SL-M FLEX 20X1.5 SL-M FLEX 25X1.5 SL-M FLEX 32X1.5 .138 .276 .177 .394 .276 .512 .354 .669 .433 .827 .138 .276 .177 .394 .276 .512 .354 .669 .433 .827 .47 2.52 .315 .203 .591 100 1.25 .63 3.39 .315 .218 .748 100 2.50 .79 3.98 .354 .218 .984 50 4.50 .98 4.92 .394 .234 1.181 25 8.00 1.26 5.87 .394 .250 1.417 25 12.00 .47 2.52 .315 .203 .591 100 1.25 .63 3.39 .315 .218 .748 100 2.50 .79 3.98 .354 .218 .984 50 4.50 .98 4.92 .394 .234 1.181 25 8.00 1.26 5.87 .394 .250 1.417 25 12.00 * Locknuts provided with Metric sizes. **Orders of 2000 pcs. or more will be bulk packaged unless otherwise specified. A Lapp Group Company Application Information NPT Thread (nylon) NPT Thread (metallic) Metric Thread Part Number 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 5301 9000 9010 9020 9030 9040 9050 9060 9070 9080 9090 9200 9210 9220 9230 9240 9250 9260 9270 9280 9290 A Lapp Group Company Description Color GMP-GL 7 GMP-GL 9 GMP-GL 11 GMP-GL 13 GMP-GL 16 GMP-GL 21 GMP-GL 29 GMP-GL 36 GMP-GL 42 GMP-GL 48 GMP-GL 7 GMP-GL 9 GMP-GL 11 GMP-GL 13 GMP-GL 16 GMP-GL 21 GMP-GL 29 GMP-GL 36 GMP-GL 42 GMP-GL 48 Gray Gray Gray Gray Gray Gray Gray Gray Gray Gray Black Black Black Black Black Black Black Black Black Black Wrenching Flats inches .748 .866 .945 1.063 1.181 1.417 1.811 2.362 2.559 2.756 .748 .866 .945 1.063 1.181 1.417 1.811 2.362 2.559 2.756 mm 19 22 24 27 30 36 46 60 65 70 19 22 24 27 30 36 46 60 65 70 Locknut Thickness inches .197 .197 .197 .236 .236 .276 .276 .315 .315 .315 .197 .197 .197 .236 .236 .276 .276 .315 .315 .315 mm 5.0 5.0 5.0 6.0 6.0 7.0 7.0 8.0 8.0 8.0 5.0 5.0 5.0 6.0 6.0 7.0 7.0 8.0 8.0 8.0 Locknut Diameter inches .827 .945 1.024 1.142 1.300 1.535 1.968 2.598 2.874 3.071 .827 .945 1.024 1.142 1.300 1.535 1.968 2.598 2.874 3.071 mm 21.0 24.0 26.0 29.0 33.0 38.9 49.9 65.9 73.0 78.0 21.0 24.0 26.0 29.0 33.0 38.9 49.9 65.9 73.0 78.0 Pack Size 100 100 100 100 100 50 50 25 25 25 100 100 100 100 100 50 50 25 25 25 Application Information PG Thread NPT Thread Part Number 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 5311 9000 9010 9020 9030 9040 9050 9060 9070 9100 9110 9120 9130 9140 9150 9160 9170 A Lapp Group Company Description GMP-GL M 12 X 1.5 GMP-GL M 16 X 1.5 GMP-GL M 20 X 1.5 GMP-GL M 25X 1.5 GMP-GL M 32 X 1.5 GMP-GL M 40 X 1.5 GMP-GL M 50 X 1.5 GMP-GL M 63 X 1.5 GMP-GL M 12 X 1.5 GMP-GL M 16 X 1.5 GMP-GL M 20 X 1.5 GMP-GL M 25 X 1.5 GMP-GL M 32 X 1.5 GMP-GL M 40 X 1.5 GMP-GL M 50 X 1.5 GMP-GL M 63 X 1.5 Color Gray Gray Gray Gray Gray Gray Gray Gray Black Black Black Black Black Black Black Black Wrenching Flats inches 0.669 0.866 1.024 1.260 1.614 1.969 2.362 2.953 0.669 0.866 1.024 1.260 1.614 1.969 2.362 2.953 mm 17 22 26 32 41 50 60 75 17 22 26 32 41 50 60 75 Locknut Thickness inches .197 .197 .236 .236 .276 .276 .315 .315 .197 .197 .236 .236 .276 .276 .315 .315 mm 5.0 5.0 6.0 6.0 7.0 7.0 8.0 8.0 5.0 5.0 6.0 6.0 7.0 7.0 8.0 8.0 Pack Size 100 100 100 100 100 50 50 50 100 100 100 100 100 50 50 50 Application Information Material: Silicone Seal: IP 54 when all holes are filled Temperature: -30C to +100C Part Number 5360 5360 5360 5360 5360 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5361 5362 5362 5362 5362 5362 5362 5362 5362 5362 5362 7225 7417 9210 9320 9230 1225 1240 1330 1430 3250 3340 3440 6140 6240 6260 6340 6350 6356 6360 6440 6450 6540 1270 1280 1370 1380 1460 1550 1640 9290 9390 9470 Fits PG Size Fits NPT Size Description Number of Holes Size of Holes Pack Size 7 7 9 9 9 11 11 11 11 13 13 13 16 16 16 16 16 16 16 16 16 16 21 21 21 21 21 21 21 29 29 29 3/8 3/8 3/8 1/2 1/2 1/2 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1 1 DIX 7225 DIX 7417 DIX 0921 DIX 0932 DIX 0923 DIX 11225 DIX 1124 DIX 1133 DIX 1143 DIX 1325 DIX 1334 DIX 1344 DIX 1614 DIX 1624 DIX 1626 DIX 1634 DIX 1635 DIX 16356 DIX 1636 DIX 1644 DIX 1645 DIX 1654 DIX 2127 DIX 2128 DIX 2137 DIX 2138 DIX 2146 DIX 2155 DIX 2164 DIX 2929 DIX 2939 DIX 2947 2 4 2 3 2 2 2 3 4 2 3 4 1 2 2 3 3 3 3 4 4 5 2 2 3 3 4 5 6 2 3 4 2.5 1.7 1 2 3 2.5 4 3 3 5 4 4 4 4 6 4 5 5.6 6 4 5 4 7 8 7 8 6 5 4 9 9 7 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 5362 5362 5362 5362 9480 9490 9556 9570 A Lapp Group Company 29 29 29 29 1 1 1 1 DIX 2948 DIX 2949 DIX 29556 DIX 2957 4 4 5 5 8 9 5.6 7 50 50 50 50 Application Information Material: NBR Silicon Free Seal: IP 54 Temperature: -40C to +100C Special shapes available on request Part Number 5331 5331 5332 5332 5332 5332 5332 5332 5332 5333 5333 5333 5333 6230 6240 0250 0340 5260 5360 5370 5450 5540 2280 2380 2460 2470 A Lapp Group Company Fits Metric Size M M M M M M M M M M M M M 16 16 20 20 25 25 25 25 25 32 32 32 32 Description DIX DIX DIX DIX DIX DIX DIX DIX DIX DIX DIX DIX DIX 16230 16240 20250 20340 25260 25360 25370 25450 25540 32280 32380 32460 32470 Number of Holes 2 2 2 3 2 3 3 4 5 2 3 4 4 Size of Holes 3 4 5 4 6 6 7 5 4 8 8 6 7 mm mm mm mm mm mm mm mm mm mm mm mm mm Pack Size 100 100 100 100 50 50 50 50 50 50 50 50 50 Application Information Material: Polyamide Part Number 5310 5310 5310 5310 5310 5310 5310 5310 0003 0004 0005 0055 0006 0007 0008 0009 A Lapp Group Company DIA x LENGTH Description DIX-DV 3 X 9 DIX-DV 4 X 9 DIX-DV 5 X 11 DIX-DV 5.5 X 11 DIX-DV 6 X 14 DIX-DV 7 X 14 DIX-DV 8 X 14 DIX-DV 9 X 14 Diameter inches 0.118 0.157 .0197 0.217 0.236 0.276 0.315 0.354 mm 3 4 5 5.5 6 7 8 9 Length inches .0354 .0354 .0433 .0433 0.551 0.551 0.551 0.551 mm 9 9 11 1 14 14 14 14 Pack Size 100 100 100 100 100 100 100 100 SKINTOP(R) SD Dust-Proof Plug SKINTOP(R) SD-M is designed to be used when a SKINTOP(R) Cord Connector is installed without a cable. They prevent dust and dirt from entering the housing interior until final cable installation is completed. They provide easy handling and SKINTOP(R) disassembly is not required. Simply push the cable through, and the assembly is complete. Material: Cork SKINTOP(R) DV Moisture Proof Plug SKINTOP(R) DV is made from neoprene. is designed to be used when a SKINTOP(R) Cord Connector is installed without a cable. They prevent dust and dirt from entering the housing interior until final cable installation is completed. Material: Neoprene Part Number SKINTOP(R) PG Size SD 5202 5202 5202 5202 5202 5202 5202 5202 5235 5240 5250 5260 5270 5280 5290 5291 SD 7 SD 9 SD 11 SD 13 SD 16 SD 21 SD 19 SD 36 SKINTOP(R) DV 5380 5380 5380 5380 5380 0641 0579 0583 0642 0643 DV 9 DV 11 DV 13 DV 16 DV 21 *"R" in description inidicates reducer bushing NPT Size 3/8" 1/2" 3/4" 1" 3/8" 1/2" 3/4" Pack Size 500 500 250 250 250 100 100 100 500 250 250 250 100 SKINTOP(R) SD-M Dust-Proof Plug SKINTOP(R) SD-M is made from polyethylene foam to protect the housing from dust. No need to take apart just push the cable through. Material: PE foam SKINTOP(R) DV-M Moisture Proof Plug SKINTOP(R) DV-M is made from neoprene. For all assembly work where the cable connection will be made later on and the inside of the housing needs to be protected against moisture, a SKINTOP(R) cable connector together with this sealing should be used. Material: Neoprene Part Number SKINTOP(R) Metric Size Pack Size SD-M 5411 5411 5411 5411 5411 5411 5411 5411 3100 3110 3120 3130 3140 3150 3160 3170 SD-M SD-M SD-M SD-M SD-M SD-M SD-M SD-M 12 16 20 25 32 40 50 63 100 100 100 50 50 25 25 25 SKINTOP(R) DV-M 5411 5411 5411 5411 5411 5411 5411 3000 3010 3020 3030 3040 3050 3060 DV-M DV-M DV-M DV-M DV-M DV-M DV-M 12 16 20 25 32 40 50 100 100 100 50 50 25 25 Application Information Part Number Description Diameter Range 54028000 54028010 54028020 54028030 54028040 54028050 54028060 54028070 54028100 54028110 54028120 54028130 54028140 54028150 54028160 54028170 EPDM bushing for SL-7 EPDM bushing for SL-9 (3/8") EPDM bushing for SL-11 EPDM bushing for SL-13 (1/2") EPDM bushing for SL-16 EPDM bushing for SL-21 (3/4") EPDM bushing for SL-29 (1") EPDM bushing for SL-36 EPDM red. bushing for SL-7 EPDM red. bushing for SL-9 (3/8") EPDM red. bushing for SL-11 EPDM red. bushing for SL-13 (1/2") EPDM red. bushing for SL-16 EPDM red. bushing for SL-21 (3/4") EPDM red. bushing for SL-29 (1") EPDM red. bushing for SL-36 .118 - .255 .157 - .314 .197 - .394 .236 - .472 .394 - .551 .545 - .709 .708 - 1.024 .866 - 1.259 .079 - .197 .079 - .236 .118 - .279 .295 - .353 .432 - .481 .481 - .617 .551 - .827 .787 - 1.023 A Lapp Group Company Application Information Material: Polyamide, glass fibre reinforced Seal: IP 55 Color: Gray Part Number 5310 5310 5310 5310 5310 5310 1000 1010 1020 1030 1040 1050 A Lapp Group Company Wrench Size in/mm in mm in mm in mm in mm in mm Pack Size .748/19 .866/ 22 .945/24 1.063/27 1.260/32 1.614/41 .748 .866 .945 1.063 1.260 1.614 19 22 24 27 32 41 .827 .846 .945 .984 1.181 1.339 21 21.5 24 25 30 34 .906 .984 1.063 1.161 1.378 1.516 23 25 27 29.5 35 38.5 .433 .472 .472 .511 .591 .591 11 12 12 13 15 15 .394 .511 .551 .669 .906 1.181 10 13 14 17 23 30 25 25 25 10 10 10 A B C D E Application Information Part Number Description Height of Wrench Length of Wrench 6179 1260 SKINMATIC(R) RZ 3.14 10 A Lapp Group Company Application Information Materials: Nickel-plated brass Protection: 70 PSI Seal: Neoprene Seal: IP 68 (Comparable to NEMA 6) O-Ring: Perbunan (NBR) Temperature Range: -20C to +80C Locknuts Description Part PG Size Number SKINTOPTM 5201 5700 MS 7 5201 5710 MS 9 5201 5720 MS 11 5201 5730 MS 13 5201 5740 MS 16 5201 5750 MS 21 5201 5760 MS 29 5201 5765 MS 36 5201 5766 MS 42 5201 5767 MS 48 5201 5770 MSR 7 5201 5780 MSR 9 Diameter Range inches mm .079 2.256 6.5 .118 3-8 .315 .157 4.394 10 .197 5.472 12 .315 8.551 14 .433 - 11 .709 18 .630 - 16 .984 25 .748 - 19 1.260 32 1.102 - 28 1.496 38 1.339 - 34 1.732 44 .079 2-5 .197 .079 2-6 .236 Mounting Hole Maximum Overall Length Wrench Flats inches mm Thread Length on Lower Part inches mm Pack Size .492 .985 .551 14 5.0 5.0 100 .599 1.142 .669 17 6.0 6.0 100 .733 1.260 .787 20 6.0 6.0 50 .804 1.339 .866 22 6.5 6.5 50 .886 1.380 .945 24 6.5 6.5 50 1.115 1.575 1.181 30 7.0 7.0 25 1.457 1.890 1.575 40 8.0 8.0 25 1.850 2.441 1.969 50 15.0 15.0 10 2.126 2.441 2.244 57 15.0 15.0 5 2.333 2.441 2.520 64 15.0 15.0 5 .492 .985 .551 14 5.0 5.0 100 .599 1.142 .669 17 6.0 6.0 100 5201 5790 MSR 11 5201 5800 MSR 13 5201 5810 MSR 16 5201 5820 MSR 21 5201 5830 MSR 29 5201 5831 MSR 36 5201 5832 MSR 42 5201 5833 MSR 48 .118 3-7 .276 .157 4-9 .354 .236 6.512 13 .315 8.630 16 .413 - 10.5 .787 20 .748 - 19 1.024 26 .945 - 24 1.220 31 1.102 - 28 1.378 35 *"R" in description inidicates reducer bushing A Lapp Group Company .733 1.260 .787 20 6.0 6.0 50 .804 1.339 .866 22 6.5 6.5 50 .886 1.380 .945 24 6.5 6.5 50 1.115 1.575 1.181 30 7.0 7.0 25 1.457 1.890 1.575 40 8.0 8.0 25 1.850 2.441 1.969 50 15.0 15.0 10 2.126 2.441 2.244 57 15.0 15.0 5 2.333 2.441 2.520 64 15.0 15.0 5 Application Information Materials: Nickel-plated brass Bushing: Neoprene Halogen Free Bushing available on request O-Ring: Perbunan (NBR) Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) when used with O-ring Temperature Range: -20C to +80C Locknuts Part Number 5211 5211 5211 5211 5211 5211 5211 5211 5211 5211 5211 5211 5211 5211 5700 5710 5720 5730 5740 5750 5760 5770 5780 5790 5800 5810 5820 5830 Type/Size MSL 7 MSL 9 MSL 11 MSL 13 MSL 16 MSL 21 MSL 29 MSLR 7 MSLR 9 MSLR 11 MSLR 13 MSLR 16 MSLR 21 MSLR 29 Diameter Range .079 .118 .157 .197 .315 .433 .630 .079 .079 .118 .157 .236 .315 .423 - B D C E Std. Maximum Wrenching Pack WT/C Mounting Overall Thread Wrenching Nut Size Hole Flats Length Length Thickness .256 .315 .394 .472 .551 .709 .984 .197 .236 .276 .354 .512 .630 .787 * "R" in description indicates reducer bushing. A .492 .599 .733 .804 .886 1.115 1.457 .492 .599 .733 .804 .886 1.115 1.457 1.260 1.380 1.500 1.560 1.600 1.770 2.170 1.260 1.380 1.500 1.560 1.600 1.770 2.170 .472 .472 .472 .472 .472 .472 .519 .472 .472 .472 .472 .472 .472 .519 .110 .110 .118 .118 .118 .138 .157 .110 .110 .118 .118 .118 .138 .157 .551 .669 .788 .866 .945 1.181 1.575 .551 .669 .788 .866 .945 1.181 1.575 100 100 50 50 50 25 25 100 100 50 50 50 25 25 2.50 4.50 6.50 7.00 8.50 14.50 30.00 2.50 4.50 6.50 7.00 8.50 14.50 30.00 Application Information Materials: Nickel-plated brass Seal: Neoprene O-Ring: Perbunan Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) when used with O-rings Temperature Range: -20C to +80C Locknuts Part Number 5311 2000 5311 2010 5311 2020 5311 2030 5311 2040 5311 2050 5311 2060 5311 2070 5311 2100 5311 2110 5311 2120 5311 2130 5311 2140 5311 2150 Type/Size Diameter Range B D C E Std. Maximum Wrenching Pack WT/C Mounting Overall Thread Wrenching Nut Size Hole Flats Length Length Thickness A MS-M 12X1.5 .138 - .276 .470 1.075 .256 .110 .630 100 4.0 MS-M 16X1.5 .177 - .394 .630 1.260 .276 .110 .787 100 6.5 MS-M 20X1.5 .276 - .512 .790 1.400 .315 .118 .945 50 9.0 MS-M 25X1.5 .354 - .669 .980 1.476 .315 .118 1.142 25 13.5 MS-M 32X1.5 .433 - .827 1.260 1.660 .354 .118 1.417 25 23.0 1.570 1.949 .354 .138 1.772 10 38.5 1.970 2.047 .394 .157 2.126 5 54.0 2.480 2.413 .591 .197 2.638 5 88.0 .039 - .197 .470 1.075 .256 .110 .630 100 4.0 .079 - .276 .630 1.260 .276 .110 .787 100 6.5 .197 - .394 .790 1.400 .315 .118 .945 50 9.0 .236 - .512 .980 1.476 .315 .118 1.142 25 14.0 .276 - .591 1.260 1.660 .354 .118 1.417 25 23.5 .591 - .906 1.570 1.949 .354 .138 1.772 10 39.5 MS-M 40X1.5 MS-M 50X1.5 MS-M 63X1.5 MSR-M 12X1.5 MSR-M 16X1.5 MSR-M 20X1.5 MSR-M 25X1.5 MSR-M 32X1.5 MSR-M 40X1.5 .748 1.102 1.063 1.378 1.339 1.772 5311 2160 5311 2170 MSR-M 50X1.5 MSR-M 63X1.5 .866 1.142 1.102 1.535 * "R" in description indicates reducer bushing. A Lapp Group Company 1.970 2.047 .394 .157 2.126 5 55.0 2.480 2.413 .591 .197 2.638 5 91.0 Application Information Materials: Nickel-plated brass Seal: Neoprene O-Ring: Perbunan Halogen Free bushings available on special order Protection: 70 PSI Seal: IP 68 (Comparable to NEMA 6) when used with O-rings Temperature Range: -30C to +100C Locknuts Part Number Type/Size 5311 2005 5311 2015 5311 2025 5311 2035 5311 2045 5311 2055 5311 2065 5311 2070 5311 2105 5311 2115 5311 2125 5311 2135 5311 2145 MS-M-XL 12X1.5 MS-M-XL 16X1.5 MS-M-XL 20X1.5 MS-M-XL 25X1.5 MS-M-XL 32X1.5 MS-M-XL 40X1.5 MS-M-XL 50X1.5 MS-M-XL 63X1.5 MSR-M-XL 12X1.5 MSR-M-XL 16X1.5 MSR-M-XL 20X1.5 MSR-M-XL 25X1.5 MSR-M-XL 32X1.5 Diameter Range B D C E Std. Maximum Wrenching Pack WT/C Mounting Overall Thread Wrenching Nut Size Hole Flats Length Length Thickness A .138 - .276 .470 1.291 .472 .110 .630 100 4.5 .177 - .394 .630 1.457 .472 .110 .787 50 7.0 .276 - .512 .790 1.555 .472 .118 .945 50 9.5 .354 - .669 .980 1.634 .472 .118 1.142 25 14.0 .433 - .827 1.260 1.898 .591 .118 1.417 25 23.5 1.570 1.949 .591 .138 1.772 10 39.0 1.970 2.047 .591 .157 2.126 5 54.5 2.480 2.143 .591 .197 2.638 5 89.0 .039 - .197 .470 1.291 .472 .110 .630 100 4.5 .079 - .276 .630 1.457 .472 .110 .787 50 7.0 .197 - .394 .790 1.555 .472 .118 .945 50 9.5 .236 - .512 .980 1.634 .472 .118 1.142 25 14.0 .276 - .591 1.260 1.898 .591 .118 1.417 25 23.5 .748 1.102 1.063 1.378 1.339 1.772 5311 2155 5311 2165 5311 2170 MSR-M-XL 40X1.5 MSR-M-XL 50X1.5 MSR-M-XL 63X1.5 .591 - .906 .866 1.142 1.102 1.535 * "R" in description indicates reducer bushing. A Lapp Group Company 1.570 1.949 .591 .138 1.772 10 39.0 1.970 2.047 .591 .157 2.126 5 54.5 2.480 2.143 .591 .197 2.638 5 89.0 Application Information Locknuts MS-SC Part Number MS-SC Thread Description Type Cable Diameter Diameter Required Over Shielded Core Mounting Thread Length SKINTOP(R) MS-SC... 5311 2210 5311 2220 5311 2230 5311 2240 5311 2250 5311 2260 9 11 13 16 21 29 PG 9 PG 11 PG 13 PG 16 PG 21 PG 29 .157-.295 .157-.394 .197-.472 .315-.551 .433-.689 .630-.984 .157 .157 .157 .236 .315 .512 .236 .236 .256 .256 .276 .315 SKINTOP(R) MS-SCL... 5311 2310 5311 2320 5311 2330 5311 2340 5311 2350 5311 2360 9 11 13 16 21 29 PG 9 PG 11 PG 13 PG 16 PG 21 PG 29 .157-.295 .157-.394 .197-.472 .315-.551 .433-.689 .630-.984 .157 .157 .157 .236 .315 .512 .472 .472 .472 .472 .472 .591 *"L" in description denotes longer thread mounting length A Lapp Group Company Application Information Material: Body: nickel-plated brass Seal: IP 20 Part Number 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 0830 0840 0850 0860 0870 0880 0890 0900 0910 0920 A Lapp Group Company Description SH 7 SH 9 SH 11 SH 13 SH 16 SH 21 SH 29 SH 36 SH 42 SH 48 Diameter Range in .315 - .394 .394 - .492 .433 - .591 .551 - .650 .591 - .709 .709 - .925 .906 - 1.220 1.142 - 1.594 1.339 - 1.772 1.535 - 1.969 mm 8 - 10 10 - 12.5 11 - 15 14 - 16.5 15 - 18 18 - 23.5 23 - 31 29 - 40.5 34 - 45 39 - 50 Largest Diameter for Installation in .866 .984 1.102 1.260 1.378 1.811 2.284 2.756 3.071 3.386 mm 22 25 28 32 35 46 58 70 78 86 Thread Length in mm .217 5.5 .236 6 .236 6 .295 7.5 .295 7.5 .315 8 .315 8 .374 9.5 .394 10 .453 11.5 Pack Size 50 50 50 25 25 25 10 10 5 5 Application Information Material: Body, clamp, screws and bracket of nickel-plated brass Bushing: Neoprene (CR) Sealing O-ring : Perbunan (NBR Seal: IP 55 Part Number 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5590 5600 0930 0940 0950 0960 0970 0980 5610 5620 A Lapp Group Company Description SHZ 7 SHZ 9 SHZ 11 SHZ 13 SHZ 16 SHZ 21 SHZ 29 SHZ 36 SHZ 42 SHZ 48 Diameter Range in .197 - .236 .295 - .335 .374 - .472 .492 - .551 .532 - .630 .610 - .827 .847 - 1.083 1.063 - 1.339 1.339 - 1.693 1.496 - 1.890 mm 5-6 7.5 - 8.5 9.5 - 12 12.5 - 14 13.5 - 16 15.5 - 21 21.5 - 27.5 27 - 34 34 - 43 38 - 48 Largest Diameter for Installation in .827 .984 1.102 1.260 1.378 1.811 2.284 2.756 3.071 3.386 mm 21 25 28 32 35 46 58 70 78 86 Thread Length in .197 .236 .236 .256 .256 .276 .315 .354 .394 .394 m 5 6 6 6.5 6.5 7 8 9 10 10 Pack Size 50 50 25 25 25 25 10 10 5 5 Application Information Material: Body, brackets and screws of nickel-plated brass Seal: IP 55 Part Number 5200 5200 5200 5200 5200 5200 4230 4240 4250 4260 4270 2740 A Lapp Group Company Description SK 9 SK 11 SK 13 SK 16 SK 21 SK 29 Diameter Range in .236 - .472 .276 - .591 .472 - .650 .512 - .709 .591 - .906 .787 - 1.220 mm 6 - 12 7 - 15 12 - 16.5 13 - 18 15 - 23 20 - 31 Largest Diameter for Installation in 0.945 1.063 1.181 1.299 1.654 2.284 mm 24 27 30 33 42 58 Thread Length in m .236 6 .236 6 .295 7.5 .295 7.5 .315 8 .315 8 Pack Size 50 50 25 25 25 10 Application Information Material: Body, saddle clamp, screws and connecting piece of nickel-plated brass Punched Seal: Neoprene Sealing O-ring: Perbunan (NBR) Seal: IP 55 Part Number 5200 5200 5200 5200 5200 5200 4280 4290 4300 4310 4320 5570 A Lapp Group Company Description SKZ 9 SKZ 11 SKZ 13 SKZ 16 SKZ 21 SKZ 29 Diameter Range in .236 - .335 .315 - .472 .472 - .551 .512 - .630 .591 - .827 .787 - 1.083 mm 6 - 8.5 8 - 12 12 - 14 13 - 16 15 - 21 20 - 27.5 Largest Diameter for Installation in .945 1.063 1.181 1.299 1.654 2.284 mm 24 27 30 33 42 58 Thread Length in m .236 6 .236 6 .256 6.5 .256 6.5 .276 7 .315 8 Pack Size 50 50 25 25 25 10 Application Information Material: Seal: Body: Nickel-plated brass Sealing taper: Neoprene (CR) O-Ring: Perbunan (NBR) IP 68 (Comparable to NEMA 6) Note: Available with chemical resistant Viton (R) bushing. Part Number Description 5200 5200 5200 5200 5200 5201 PG Connection Thread Diameter Range .150 .189 .228 .228 .268 .256 in - .189 - .228 - .268 - .268 - .346 - .346 2530 2550 2540 2570 2560 0650 SHV 7 SHV 9 SHV 9 SHV 11 SHV 11 SHV 13 7 9 9 11 11 9 5201 0660 SHV 13 9 .335 - .425 5201 0670 SHV 13 11 .268 - .346 5201 0680 SHV 13 11 .335 - .425 5200 2600 SHV 13 13 .268 - .346 5200 2590 SHV 13 13 .335 - .425 5201 0690 SHV 11 11 .335 - .425 5201 0700 SHV 11 11 .425 - .504 5201 0710 SHV 11 11 .543 - .583 5201 0720 SHV 13 13 .335 - .425 5201 0730 SHV 13 13 .425 - .504 5201 0740 SHV 13 13 .543 - .583 mm 3.8 - 4.8 4.8 - 5.8 5.8 - 6.8 5.8 - 6.8 6.8 - 8.8 6.5 - 8.8 8.5 10.8 6.8 - 8.8 8.5 10.8 6.8 10.8 8.5 10.8 8.5 10.8 10.8 12.8 13.8 14.8 8.5 10.8 10.8 12.8 13.8 14.8 Wrenching Flats ThreadLength Pack Upper & Lower Size in mm in mm .551 14 .197 5 50 .669 17 .236 6 50 .669 17 .236 6 50 .787 20 .236 6 25 .787 20 .236 6 25 .866 22 .256 6.5 25 .866 22 .256 6.5 25 .866 22 .256 6.5 25 .866 22 .256 6.5 25 .866 22 .256 6.5 25 .866 22 .256 6.5 25 .945 24 .256 6.5 25 .945 24 .256 6.5 25 .945 24 .256 6.5 25 .945 24 .256 6.5 25 .945 24 .256 6.5 25 .945 24 .256 6.5 25 5200 2640 SHV 16 16 .335 - .425 5200 2630 SHV 16 16 .425 - .504 5200 2620 SHV 16 16 .543 - .583 5201 0750 SHV 16 16 .524 - .614 5201 0760 SHV 16 16 .622 - .701 5201 0770 SHV 16 16 .690 - .780 5200 2670 SHV 21 21 .583 - .622 5200 2660 SHV 21 21 .622 - .701 5200 2650 SHV 21 21 .690 - .780 5200 2710 SHV 29 29 .768 - .858 5200 2700 SHV 29 29 .858 - .937 5200 2690 SHV 29 29 .937 1.016 A Lapp Group Company 8.5 10.8 10.8 12.8 13.8 14.8 13.3 15.6 15.8 17.8 17.5 19.8 14.8 15.8 15.8 17.8 17.5 19.8 19.5 21.8 21.8 23.8 23.8 25.8 .945 24 .256 6.5 25 .945 24 .256 6.5 25 .945 24 .256 6.5 25 1.181 30 .276 7 25 1.181 30 .276 7 25 1.181 30 .276 7 25 1.181 30 .276 7 25 1.181 30 .276 7 25 1.181 30 .276 7 25 1.575 40 .315 8 10 1.575 40 .315 8 10 1.575 40 .315 8 10 Application Information Material: Body: Nickel-plated brass Grounding sleeve: Polished Brass O-Ring: Perbunan (NBR) Sealing taper: Tapered Seal: Neoprene O-ring: Perbunan (NBR) Seal: IP 65 Part Number Description PG Connection Bushing ID Thread in mm 5201 0400 SHVE 9 9 .236 6 5201 0405 SHVE 9 9 .276 7 5201 0415 SHVE 9 9 .236 6 5201 0420 SHVE 9 9 .276 7 5201 0425 SHVE 11 11 .276 7 5201 0430 SHVE 11 11 .354 9 5201 0440 SHVE 11 11 .276 7 5201 0450 SHVE 11 11 .354 9 5201 0460 SHVE 13 13 .354 9 5201 0490 SHVE 13 13 .354 9 5200 5070 SHVE 13 13 .354 9 5201 0470 SHVE 13 13 .354 9 5201 0500 SHVE 13 13 .354 9 Cable Diameter Inner Jacket Cable Diameter Inner Jacket in .158 .228 .197 .268 .158 .228 .197 .268 .197 .268 .268 .346 .197 .268 .268 .346 .268 .346 .268 .346 .268 .346 .268 .346 .268 .346 in .158 .228 .197 .268 .158 .228 .197 .268 .197 .268 .268 .346 .197 .268 .268 .346 .268 .346 .268 .346 .268 .346 .268 .346 .268 .346 mm 4 - 5.8 5 - 6.8 4 - 5.8 5 - 6.8 5 - 6.8 6.8 - 8.8 5 - 6.8 6.8 - 8.8 6.8 - 8.8 6.8 - 8.8 6.8 - 8.8 6.8 - 8.8 6.8 - 8.8 mm Pack Size 4 - 5.8 25 5 - 6.8 25 4 - 5.8 25 5 - 6.8 25 5 - 6.8 25 6.8 - 8.8 25 5 - 6.8 25 6.8 - 8.8 25 6.8 - 8.8 25 6.8 - 8.8 25 6.8 - 8.8 25 6.8 - 8.8 25 6.8 - 8.8 25 5200 5080 SHVE 13 13 .354 9 5201 0480 SHVE 13 13 .433 11 5201 0510 SHVE 13 13 .433 11 5200 5090 SHVE 13 13 .433 11 5201 0520 SHVE 16 16 .433 11 5201 0560 SHVE 13 13 .433 11 5200 5100 SHVE 16 16 .433 11 5201 0530 SHVE 16 16 .512 13 5201 0570 SHVE 16 16 .512 13 5201 5110 SHVE 16 16 .512 13 5201 0540 SHVE 16 16 .512 13 5201 0580 SHVE 16 16 .512 13 5200 5120 SHVE 16 16 .512 13 5201 0550 SHVE 16 16 .591 15 5201 0590 SHVE 16 16 .591 15 5200 5130 SHVE 16 16 .591 15 5201 0600 SHVE 21 21 .630 16 5200 5140 SHVE 21 21 .630 16 5201 0610 SHVE 21 21 .630 16 5200 5150 SHVE 21 21 .630 16 5201 0620 SHVE 21 21 .709 18 5200 5160 SHVE 21 21 .709 18 5201 0630 SHVE 21 21 .709 18 5200 5170 SHVE 21 21 .709 18 5201 0640 SHVE 21 21 .787 20 5200 5180 SHVE 21 21 .787 20 5200 5190 SHVE 29 29 .866 22 5200 5200 SHVE 29 29 .866 22 5200 5210 SHVE 29 29 .945 24 5200 5220 SHVE 29 29 .945 24 .268 .346 .335 .425 .335 .425 .335 .425 .335 .425 .335 .425 .335 .425 .425 .504 .425 .504 .425 .504 .425 .504 .425 .504 .425 .504 .543 .583 .543 .583 .543 .583 .551 .622 .551 .622 .551 .622 .551 .622 .622 .701 .622 .701 .622 .701 .622 .701 .689 .780 .689 .780 .768 .858 .768 .858 .846 .937 .846 .937 6.8 - 8.8 8.5 - 10.8 8.5 - 10.8 8.5 - 10.8 8.5 - 10.8 8.5 - 10.8 8.5 - 10.8 10.8 12.8 10.8 12.8 10.8 12.8 10.8 12.8 10.8 12.8 10.8 12.8 13.8 14.8 13.8 14.8 13.8 14.8 14.0 15.8 14.0 15.8 14.0 15.8 14.0 15.8 15.8 17.8 15.8 17.8 15.8 17.8 15.8 17.8 17.5 19.8 17.5 19.8 19.5 21.8 19.5 21.8 21.5 23.8 21.5 23.8 .268 .346 .335 .425 .335 .425 .335 .425 .335 .425 .335 .425 .335 .425 .425 .504 .425 .504 .425 .504 .425 .504 .425 .504 .425 .504 .543 .583 .543 .583 .543 .583 .551 .622 .551 .622 .551 .622 .551 .622 .622 .701 .622 .701 .622 .701 .622 .701 .689 .780 .689 .780 .768 .858 .768 .858 .846 .937 .846 .937 6.8 - 8.8 25 8.5 - 10.8 25 8.5 - 10.8 25 8.5 - 10.8 25 8.5 - 10.8 25 8.5 - 10.8 25 8.5 - 10.8 25 10.8 12.8 10.8 12.8 10.8 12.8 10.8 12.8 10.8 12.8 10.8 12.8 13.8 14.8 13.8 14.8 13.8 14.8 14.0 15.8 14.0 15.8 14.0 15.8 14.0 15.8 15.8 17.8 15.8 17.8 15.8 17.8 15.8 17.8 17.5 19.8 17.5 19.8 19.5 21.8 19.5 21.8 21.5 23.8 21.5 23.8 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 Application Information Material: Body, saddle clamp, screws and bracket of nickel-plated brass Bushing: Flame Resistant Neoprene Sealing O-ring: Perbunan (NBR) Seal: IP 65 Part Number 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 0990 1000 1010 1020 1030 1040 1050 1060 1070 1080 1090 1100 1110 1120 1130 1140 1150 1160 1170 1180 1190 1200 1210 1220 1230 PG Thread Type SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR SR 07/05 09/07 11/07 11/09 13/09 13/11 13/13 16/13 16/15 21/15 21/17 21/19 21/20 29/20 29/23 29/25 36/26 36/30 36/33 36/35 42/35 42/38 42/40 48/40 48/44 Diameter Range in .138 - .197 .217 - .276 .217 - .276 .295 - .354 .295 - .354 .354 - .433 .433 - .512 .453 - .512 .512 - .591 .531 - .591 .591 - .669 .669 - .748 .709 - .787 .709 - .787 .827 - .906 .906 - .984 .906 - 1.024 1.063 - 1.181 1.181 - 1.299 1.260 - 1.378 1.260 - 1.378 1.378 - 1.496 1.417 - 1.575 1.417 - 1.575 1.575 - 1.732 mm 3.5 - 5 5.5 - 7 5.5 - 7 7.5 - 9 7.5 - 9 9 - 11 11 - 13 11.5 - 13 13 - 15 13.5 - 15 15 - 17 17 - 19 18 - 20 18 - 20 21 - 23 23 - 25 23 - 26 27 - 30 30 - 33 32 - 35 32 - 35 35 - 38 36 - 40 36 - 40 40 - 44 Largest Diameter for Installation in .906 .984 1.102 1.102 1.260 1.260 1.260 1.378 1.378 1.811 1.811 1.811 1.811 2.323 2.323 2.323 2.756 2.756 2.756 2.756 2.953 2.953 2.953 3.268 3.268 mm 23 25 28 28 32 32 32 35 35 46 46 46 46 59 59 59 70 70 70 70 75 75 75 83 83 Thread Length in mm .197 5 .236 6 .236 6 .236 6 .256 6.5 .256 6.5 .256 6.5 .256 6.5 .256 6.5 .276 7 .276 7 .276 7 .276 7 .315 8 .315 8 .315 8 .354 9 .354 9 .354 9 .354 9 .394 10 .394 10 .394 10 .394 10 .394 10 Pack Size 50 50 25 25 25 25 25 25 25 25 25 25 25 10 10 10 5 5 5 5 5 5 5 1 1 Application Information Material: Body: Seal: Seal: IP 54 Nickel-plated brass Neoprene 15 mm thread length available on special order O-rings available:Perbunan, Olflon (R) , Viton (R) Part Number Description 5200 5540 SVRE 9 5200 0310 SVRE 11 5200 0320 SVRE 13 5200 0330 SVRE 16 5200 0340 SVRE 21 5200 0350 SVRE 29 5200 0360 SVRE 36 5200 5550 SVRE 42 5200 5560 SVRE 48 A Lapp Group Company Diameter Range in .295 .394 .295 .492 .295 .492 .295 .591 .394 .748 .709 1.063 .984 1.378 1.398 1.811 1.594 1.988 mm 7.5 10 7.5 12.5 7.5 12.5 7.5 15 10 19 18 27 25 35 35.5 46 40.5 50.5 Overall Length MAX Wrenching Flats Upper Wrenching Flats Lower Part Thread Length Pack Size in mm in mm in mm in mm .890 22.6 .591 15 .669 17 .236 6 100 .890 22.6 .709 18 .787 20 .236 6 50 1.028 26.1 .787 20 .866 22 .256 6.5 50 1.067 27.1 .866 22 .945 24 .256 6.5 50 1.165 29.6 1.102 28 1.181 30 .276 7 50 1.283 32.6 1.457 37 1.575 40 .315 8 50 1.520 38.6 1.850 47 1.969 50 .354 9 20 1.717 43.6 2.126 54 2.244 57 .394 10 10 1.776 45.1 2.362 60 2.520 64 .394 10 10 Application Information Material: Body of nickel-plated die-cast zinc. Pressure screw and hexagon nut of nickel-plated brass. Punched seal of Neoprene Seal: IP 55 Sealing O-Ring: Gray Part Number 5200 5200 5200 5200 5200 5200 5200 4180 4190 4200 4210 4220 5420 4225 A Lapp Group Company Description RWV 7 RWV 9 RWV 11 RWV 13 RWV 16 RWV 21 RWV 29 Cable Diameter Range in .197 .197 - .315 .275 - .492 .275 - .630 .315 - .630 .433 - .787 .748 - 1.220 mm 5 5-8 7 - 12.5 7 - 16 8 - 16 11 - 20 19 - 31 C A .81 .93 1.02 1.12 1.22 1.32 1.7 in 1.02 1.10 1.24 1.36 1.4 1.67 2.32 D mm 26 28 31.5 34.5 35.5 42.5 59 G in mm in mm .33 8.5 .55 14 .37 9.5 .67 17 .39 10 79 20 .41 10.5 .87 22 .43 11 .94 24 .45 11.5 1.18 30 .51 13 1.57 40 Pack Size 25 25 25 25 10 10 10 Brass hole plugs are for use when existing PG-threaded holes are not yet, or no longer required. Material: Nickel-plated brass Part Number 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 A Lapp Group Company 2680 3390 3400 3410 3420 3430 3440 3450 3460 2790 PG Size Pack Size BL 7 BL 9 BL 11 BL 13 BL 16 BL 21 BL 29 BL 36 BL 42 BL 48 100 100 100 100 100 50 50 50 25 25 Application Information Material: Nickel-plated brass Part Number 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 3490 3500 3510 3520 3530 3540 3550 3560 3570 3580 A Lapp Group Company Description SM 7 SM 9 SM 11 SM 13 SM 16 SM 21 SM 29 SM 36 SM 42 SM 48 Wrenching Flats in .591 .709 .827 .906 1.024 1.260 1.614 2.008 2.362 2.520 mm 15 18 21 23 26 32 41 51 60 64 Thickness in .110 .110 .118 .118 .118 .138 .157 .197 .197 .217 mm 2.8 2.8 3 3 3 3.5 4 5 5 5.5 Pack Size 100 100 100 100 100 50 50 25 25 25 Application Information Material: Nickel-plated brass Part Number 5210 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 5200 A Lapp Group Company 3750 3760 3770 3780 3790 3800 3810 3820 3830 3840 3850 3860 3870 3880 3890 3900 3910 3920 3930 3940 3950 3970 3980 Description Pack Size MR 9 to 7 MR 11 to 7 MR 11 to 9 MR 13 to 7 MR 13 to 9 MR 13 to 11 MR 16 to 7 MR 16 to 9 MR 16 to 11 MR 16 to 13 MR 21 to 11 MR 21 to 13 MR 21 to 16 MR 29 to 13 MR 29 to 16 MR 29 to 21 MR 36 to 16 MR 36 to 21 MR 36 to 29 MR 42 to 29 MR 42 to 36 MR 48 to 36 MR 48 to 42 100 100 100 100 100 100 100 100 100 100 50 50 50 50 50 50 50 50 50 25 25 25 25 Application Information Material: Temperature Range: Part Number 5300 5200 5300 5200 5300 5200 5300 5200 5300 5200 1035 5730 1020 5740 1030 5750 1040 5760 1050 5770 Perbunan (NBR), black -20C to +100C Inner Diameter Description in mm O7 .394 10 O9 .512 13 O 11 .630 16 O 13 .709 18 O 16 .787 20 O 21 1.024 26 O 29 1.339 34 O 36 1.732 44 O 42 1.969 50 O 48 2.165 55 A Lapp Group Company Lapp North America Distributor Locator Thickness in .059 .059 .059 .059 .059 .079 .079 .079 .079 .079 mm 1.5 1.5 1.5 1.5 1.5 2.0 2.0 2.0 2.0 2.0 Pack Size 500 500 500 500 500 500 100 100 100 100 Application Information Part Number Description Length Pack Size 6172 5950 6171 7400 PTS 4 Matis(R) 7" 7" 1 1 A Lapp Group Company