Patented Security: Patent #: P-2631996
International Approvals: UL # E146370
CSA # LR50370-10
VDE # 57986
SEV # 100989
Protection: Up to 70 PSI
Material: Polyamide - flame retardant, self-extinguishing nylon with
neoprene bushing
Rated Temperature: -20°C to +80°C - short term to +100°C
Seal: IP 68 (International Protection - highest grade), comparable to
NEMA 6 classification
First digit (0-6): Dust Protection
Second digit (0-8): Water Protection
Resistant to: Salt water, weak acids, weak alcalis, alcohol, ester, ketones, ether,
benzene, gas, mineral oil,animal and vegetable oils, gasoline, oil,
grease, and common solvents
SKINTOP ® meets the most stringent demands of safety and operational reliability. SKINTOP ® can be
used in panels, switches, control boxes, submersible pumps, appliances and many machine tool
applications.
SKINTOP ® is both a strain relief and a liquid tight seal - all in one connector.
Complete liquid tightness is achieved with a uniquely designed molded sealing ring and flange nut
combined with a neoprene bushing and domed sealing cap.
SKINTOP ® outperforms traditional connectors because the design consists of three parts which do not
require dismantling before use.
The internal ratchet mechanism allows the cap to be tightened without twisting the cord as it
compresses, pushing the collet fingers together to form a liquid-tight seal with the neoprene
compression.
An integrated locking mechanism that includes and internal ratchet inside the sealing portion of the
cord grip provides a self locking and vibration proof element that prevents the cap from loosening even
when subjected to severe vibration.
The multi-trapezoidal thread requires just one twist to tighten the dome cap - automatically adjusting
to the size of the cable and providing optimum strain relief and liquid tight seal.
SKINTOP ® incorporates a heavy duty design that provides greater pull out strength and very reliable
strain relief.
Larger ergonomic design and ridges in the dome cap provide easy gripping and mounting by hand or
wrench.
The uniquely designed collet, combined with the optional reducing bushing accomodates a broad range
of cords, and cable diameters resulting in a reduction in the number of connectors required in
inventory.
The SKINTOP ® can withstand impact at low temperatures of -20°C
A Lapp Group Company
Technical data for assembly
PG-Thread
DIN 40430 Nominal Thread
Ø d1Ø d2pØ d3
PG 7 11.28 12.50 1.27 13.0 ± 0.2
PG 9 13.86 15.20 1.41 15.7 ± 0.2
PG 11 17.26 18.60 1.41 19.0 ± 0.2
PG 13.5 19.06 20.40 1.41 21.0 ± 0.2
PG 16 21.16 22.50 1.41 23.0 ± 0.2
PG 21 26.78 28.30 1.588 28.8 ± 0.2
PG 29 35.48 37.00 1.588 37.5 ± 0.3
PG 36 45.48 47.00 1.588 47.5 ± 0.3
PG 42 52.48 54.00 1.588 54.5 ± 0.3
PG 48 57.73 59.30 1.588 59.8 ± 0.3
d1 = core diameter
d2 = outside diameter
d3 = bore diameter
p = pitch
Metric thread
DIN 46319 Nominal Thread
Ø d1Ø d2pØ d3
M 12 x 1.5 10.38 12 1.5 12.5 ± 0.2
M 16 x 1.5 14.38 16 1.5 16.5 ± 0.2
M 20 x 1.5 18.38 20 1.5 20.5 ± 0.2
M 25 x 1.5 23.38 25 1.5 25.5 ± 0.2
M 32 x 1.5 30.38 32 1.5 32.5 ± 0.2
M 40 x 1.5 38.38 40 1.5 40.5 ± 0.3
M 50 x 1.5 48.38 50 1.5 50.5 ± 0.3
M 63 x 1.5 61.38 63 1.5 64.0 ± 0.3
Tightening torque values to DIN/VDE 0619, Point 7. The tightening torque values to DIN/VDE 0619 are
the torque values for tightening the center sections to achieve Protection Class IP 68-5 bar.
Nominal size
PG NPT Metal tourque in Nm Polyamide tourque in Nm
PG 7 6.25 2.50
PG 9 3/8" 6.25 3.75
PG 11 6.25 3.75
PG 13.5 1/2" 6.25 3.75
PG 16 7.50 5.00
PG 21 3/4" 10.00 7.50
PG 29 1" 10.00 7.50
PG 36 10.00 7.50
PG 42 10.00 7.50
PG 48 10.00 7.50
Shown here are the carefully matched components of the SKINTOP® screw-type cable glands. It is
precisely these parts which guarantee optimum reliability.
Even more: With SKINTOP® you can install the cable in an instant. Just feed it in, Turn a nut until tight -
ready. So your cable is centered, hermetically sealed and completely strain relieved with a turn of the
hand. If you do not wish to use your hands, you can of course work with a spanner wrench or Skinmatic
RZ tool. Either way, with SKINTOP® you can achieve maximum reliability. To ensure that this remains so,
SKINTOP® quality is continuously monitored. A quality which has brought us a great many international
approvals.
Click here
The familiar PG Standard threads (DIN 46320) were replaced in 2000 with European Standard Metric
threads (EN 50262). Only cable glands with Metric connections will be allowed on new production. PG 7 to
PG 48 will be replaced by metric sizes M 12 to M 63. This changeover doesn't only affect cable glands, but
also all the housing systems and appliances into which cables must be inserted.
The German Federation of Electrotechnical and Electrical Industries draws attention to the fact that by
March 2001 European Safety Standard EN 50262 must be applied and the present VDE 0619 for glands
with PG threads will be withdrawn.
EN 50262 is a safety norm, and no longer a construction norm with the function of defining dimensions as
did DIN 46319 and DIN 46320. This means that the functions required of a cable gland can be realized
without the restrictions prescribed by the DIN specifications.
With the introduction of SKINTOP® SLM, SL Flex-M and SKINTOP® MS-M, Lapp has transposed the
requirements of EN 50262 to this new series. The SKINTOP® glands of Metric design combine all the
advantages of the proven SKINTOP® series: simple, rapid and permanent installation with optimal strain
relief, plus protection against vibration and sealing in accordance with IP 68
A special feature of the new SKINTOP® Metric glands is the large, extended clamping range. This feature
makes it easier to assign the gland to the cable OD since instead of 10 PG sizes, there are now only 8
Metric sizes!
Naturally we can supply you with the corresponding supplementary cable management products such as
SKINTOP® DIX multi-cable inserts, SKINTOP® GMP-GL M and SKINDICHT® SM-M dust seal; SKINTOP®
DV-M sealing plugs in either plastic or metal, O-Rings, thread adapters and more!
A Lapp Group Company
Application Information
Materials:
Body: Polyamide
Seal: Neoprene
Halogen Free Seals Available on Special Order
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6)
Temperature Range: -20°C to +80°C
Dimensional Details
Part
Number Description Thread
Type UL
Status Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Pack
Size
PG Thread Standard Type - Gray
S1207 SLR-7 PG-7 R .079 -
.197 .492 1.259 .315 .203 .591 100
S1107 SL-7 PG-7 R .118 -
.255 .492 1.259 .315 .203 .591 100
S1209 SLR-9 PG-9 R .079 -
.236 .599 1.378 .315 .218 .750 100
S1109 SL-9 PG-9 R .157 -
.314 .599 1.378 .315 .218 .750 100
S1211 SLR-11 PG-11 R .118 -
.279 .733 1.500 .315 .218 .866 100
S1111 SL-11 PG-11 R .197 -
.394 .733 1.500 .315 .218 .866 100
S1213 SLR-13 PG-13 L .341 -
.353 .804 1.614 .354 .218 .945 100
S1113 SL-13 PG-13 L .236 -
.472 .804 1.614 .354 .218 .945 100
S1216 SLR-16 PG-16 L .423 -
.481 .886 1.732 .394 .234 1.063 50
S1116 SL-16 PG-16 L .394 -
.551 .886 1.732 .394 .234 1.063 50
S1221 SLR-21 PG-21 L .481 -
.617 1.115 1.929 .433 .250 1.299 50
S1121 SL-21 PG-21 L .545 -
.709 1.115 1.929 .433 .250 1.299 50
S1229 SLR-29 PG-29 R .512 -
.787 1.457 2.165 .433 .297 1.654 25
S1129 SL-29 PG-29 R .708 -
.984 1.457 2.165 .433 .297 1.654 25
S1236 SLR-36 PG-36 L .787 -
1.023 1.850 2.519 .315 .315 2.087 10
S1136 SL-36 PG-36 L .866 -
1.259 1.850 2.519 .315 .315 2.087 10
S1242 SLR-42 PG-42 R .945 -
1.220 2.126 2.638 .360 .360 2.362 5
S1142 SL-42 PG-42 R 1.259 -
1.496 2.126 2.638 .360 .360 2.362 5
S1248 SLR-48 PG-48 L 1.141 -
1.378 2.335 2.717 .360 .360 2.559 5
S1148 SL-48 PG-48 L 1.456 -
1.732 2.335 2.717 .360 .360 2.559 5
PG Thread Standard Type - Black
S2207 SLR-7 PG-7 R .079 -
.197 .492 1.259 .315 .203 .591 100
S2107 SL-7 PG-7 R .118 -
.255 .492 1.259 .315 .203 .591 100
S2209 SLR-9 PG-9 R .079 -
.236 .599 1.378 .315 .218 .750 100
S2109 SL-9 PG-9 R .157 -
.314 .599 1.378 .315 .218 .750 100
S2211 SLR-11 PG-11 R .118 -
.279 .733 1.500 .315 .218 .866 100
S2111 SL-11 PG-11 R .197 -
.394 .733 1.500 .315 .218 .866 100
S2213 SLR-13 PG-13 L .295 -
.353 .804 1.614 .354 .218 .945 100
S2113 SL-13 PG-13 L .236 -
.472 .804 1.614 .354 .218 .945 100
S2216 SLR-16 PG-16 L .423 -
.481 .886 1.732 .394 .234 1.063 50
S2116 SL-16 PG-16 L .394 -
.551 .886 1.732 .394 .234 1.063 50
S2221 SLR-21 PG-21 L .481 -
.617 1.115 1.929 .433 .250 1.299 50
S2121 SL-21 PG-21 L .545 -
.709 1.115 1.929 .433 .250 1.299 50
S2229 SLR-29 PG-29 R .551 -
.827 1.457 2.165 .433 .297 1.654 25
S2129 SL-29 PG-29 R .708 -
.984 1.457 2.165 .433 .297 1.654 25
S2236 SLR-36 PG-36 L 1.023 -
1.024 1.850 2.519 .315 .315 2.087 10
S2136 SL-36 PG-36 L .866 -
1.259 1.850 2.519 .315 .315 2.087 10
S2242 SLR-42 PG-42 R .945 -
1.220 2.126 2.638 .360 .360 2.362 5
S2142 SL-42 PG-42 R 1.259 -
1.496 2.126 2.638 .360 .360 2.362 5
S2248 SLR-48 PG-48 L 1.141 -
1.378 2.335 2.717 .360 .360 2.559 5
S2148 SL-48 PG-48 L 1.456 -
1.732 2.335 2.717 .360 .360 2.559 5
* "R" in description indicates reducer bushing.
**Locknuts provided with PG sizes.
***Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested.
UL Status: R = Recognized; L = Listed
Application
Information
Materials:
Body: Polyamide
Seal: Neoprene
Halogen Free Seals Available on Special Order
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6)
Temperature Range: -20°C to +80°C
Dimensional Details
Part
Number Description Thread
Type UL
Status Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Pack
Size
NPT Thread - Standard Type - Black
S2238 SLRN 9
(3/8") NPT-
3/8" R.079 -
.236 .675 1.692 .563 .218 .743 100
S2138 SLN 9
(3/8") NPT-
3/8" R.157 -
.314 .675 1.692 .563 .218 .743 100
S2212 SLRN 13
(1/2") NPT-
1/2" L.295 -
.353 .825 1.734 .563 .218 .938 100
S2112 SLN 13
(1/2") NPT-
1/2" L.236 -
.472 .825 1.734 .563 .218 .938 100
S2234 SLRN 21
(3/4") NPT-
3/4" L.481 -
.617 1.050 1.969 .563 .250 1.297 50
S2134 SLN 21
(3/4") NPT-
3/4" L.545 -
.709 1.050 1.969 .563 .250 1.297 50
S2201 SLRN 29
(1") NPT-1" L .551 -
.827 1.303 2.283 .563 .276 1.654 25
S2101 SLN 29 (1") NPT-1" L .708 -
1.024 1.303 2.283 .563 .276 1.654 25
NPT Thread - Standard Type - Gray
S1238 SLRN 9
(3/8") NPT-
3/8" R.079 -
.236 .675 1.692 .563 .218 .743 100
S1138 SLN 9
(3/8") NPT-
3/8" R.157 -
.314 .675 1.692 .563 .218 .743 100
S1212 SLRN 13
(1/2") NPT-
1/2" L.295 -
.353 .825 1.734 .563 .218 .938 100
S1112 SLN 13
(1/2") NPT-
1/2" L.236 -
.472 .825 1.734 .563 .218 .938 100
S1234 SLRN 21
(3/4") NPT-
3/4" L.481 -
.617 1.050 1.969 .563 .250 1.297 50
S1134 SLN 21
(3/4") NPT-
3/4" L.545 -
.709 1.050 1.969 .563 .250 1.297 50
S1201 SLRN 29
(1") NPT-1" L .551 -
.827 1.303 2.283 .563 .276 1.654 25
S1101 SLN 29 (1") NPT-1" L .708 -
1.024 1.303 2.283 .563 .276 1.654 25
* "R" in description indicates reducer bushing.
**Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested.
UL Status: R = Recognized; L = Listed
A Lapp Group Company
Application Information
Materials:
Body: Polyamide
Bushing: Neoprene
Halogen Free Bushings Available on request
Color: Black (RAL 9005)
Gray (RAL 7001)
*Lt Gray (RAL 7035) Available upon request
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6)
Temperature Range: Static:-20°C to +100°C
Dynamic: -20°C to +80°C
Locknuts: Included
Dimensional Details
Part
Number
Description
Metric
Thread
Diameter
Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Std.
Pack
Size WT/C
Metric Thread - Standard Type - Black
S2507 SL-M 12x1.5 .138 -
.276 .47 1.18 .315 .203 .591 100 1.00
S2607 SLR-M
12x1.5 .039 -
.197 .47 1.18 .315 .203 .591 100 1.00
S2509 SL-M 16x1.5 .177 -
.394 .63 1.34 .315 .218 .748 100 1.50
S2609 SLR-M
16x1.5 .079 -
.276 .63 1.34 .315 .218 .748 100 1.50
S2513 SL-M 20x1.5 .276 -
.512 .79 1.46 .354 .218 .984 100 2.50
S2613 SLR-M
20x1.5 .197 -
.394 .79 1.46 .354 .218 .984 100 2.50
S2516 SL-M 25x1.5 .354 -
.669 .98 1.58 .394 .234 1.181 50 3.50
S2616 SLR-M
25x1.5 .236 -
.512 .98 1.58 .394 .234 1.181 50 3.50
S2521 SL-M 32x1.5 .433 -
.827 1.26 1.85 .394 .250 1.417 25 6.00
S2621 SLR-M
32x1.5 .276 -
.591 1.26 1.85 .394 .250 1.417 25 6.00
S2529 SL-M 40x1.5 .748 -
1.102 1.57 2.05 .394 .207 1.811 10 10.50
S2629 SLR-M
40x1.5 .591 -
.906 1.57 2.05 .394 .207 1.811 10 10.50
S2536 SL-M 50x1.5 1.063 -
1.378 1.97 2.44 .472 .315 2.165 5 17.50
S2636 SLR-M
50x1.5 .866 -
1.142 1.97 2.44 .472 .315 2.165 5 17.50
S2542 SL-M 63x1.5 1.339 -
1.772 2.48 2.80 .472 .360 2.508 5 25.50
S2642 SLR-M
63x1.5 1.102 -
1.535 2.48 2.80 .472 .360 2.508 5 25.50
Metric Thread - Standard Type - Gray
S1507 SL-M 12x1.5 .138 -
.276 .47 1.18 .315 .203 .591 100 1.00
S1607 SLR-M
12x1.5 .039 -
.197 .47 1.18 .315 .203 .591 100 1.00
S1509 SL-M 16x1.5 .177 -
.394 .63 1.34 .315 .218 .748 100 1.50
S1609 SLR-M
16x1.5 .079 -
.276 .63 1.34 .315 .218 .748 100 1.50
S1513 SL-M 20x1.5 .276 -
.512 .79 1.46 .354 .218 .984 100 2.50
S1613 SLR-M
20x1.5 .197 -
.394 .79 1.46 .354 .218 .984 100 2.50
S1516 SL-M 25x1.5 .354 -
.669 .98 1.58 .394 .234 1.181 50 3.50
S1616 SLR-M
25x1.5 .236 -
.512 .98 1.58 .394 .234 1.181 50 3.50
S1521 SL-M 32x1.5 .433 -
.827 1.26 1.85 .394 .250 1.417 25 6.00
S1621 SLR-M
32x1.5 .276 -
.591 1.26 1.85 .394 .250 1.417 25 6.00
S1529 SL-M 40x1.5 .748 -
1.102 1.57 2.05 .394 .207 1.811 10 10.50
S1629 SLR-M
40x1.5 .591 -
.906 1.57 2.05 .394 .207 1.811 10 10.50
S1536 SL-M 50x1.5 1.063 -
1.378 1.97 2.44 .472 .315 2.165 5 17.50
S1636 SLR-M
50x1.5 .866 -
1.142 1.97 2.44 .472 .315 2.165 5 17.50
S1542 SL-M 63x1.5 1.339 -
1.772 2.48 2.80 .472 .360 2.508 5 25.50
S1642 SLR-M
63x1.5 1.102 -
1.535 2.48 2.80 .472 .360 2.508 5 25.50
* "R" in description indicates reducer bushing.
** Locknuts provided with Metric Sizes
*** Orders of 2000 pieces or more per item will be bulk packaged unless otherwise requested.
A Lapp Group Company
Application Information
Material: Polyolifin
Bushing: Viton
Color: Black
Temperature: -30°C to +80°C
Part
Number
Description
Metric
Thread
Diameter
Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Std.
Pack
Size WT/C
NPT Thread - Standard Type
CR2238 CRN 9 (3/8")
w/reducer .079 -
.236 .675 1.692 .563 .218 .734 100 1.50
CR2138 CRN 9 (3/8") .157 -
.314 .675 1.692 .563 .218 .734 100 1.50
CR2212 CRN 13
(1/2")
w/reducer
.295 -
.353 .825 1.734 .536 .218 .938 100 2.00
CR2112 CRN 13
(1/2") .236 -
.472 .825 1.734 .536 .218 .938 100 2.00
CR2234 CRN 21
(3/4")
w/reducer
.481 -
.617 1.050 1.969 .536 .250 1.297 50 5.00
CR2134 CRN 21
(3/4") .545 -
.709 1.050 1.969 .536 .250 1.297 50 5.00
NPT Thread - Flex Type
CR2438 CRN-FLEX 9
(3/8")
w/reducer
.079 -
.236 .675 3.282 .536 .218 .743 100 3.00
CR2338 CRN-FLEX 9
(3/8") .157 -
.314 .675 3.282 .536 .218 .743 100 3.00
CR2412 CRN-FLEX 13
(1/2")
w/reducer
.295 -
.353 .825 4.135 .536 .218 .938 50 5.00
CR2312 CRN-FLEX 13
(1/2") .236 -
.472 .825 4.135 .536 .218 .938 50 5.00
CR2434 CRN-FLEX 21
(3/4")
w/reducer
.481 -
.617 1.050 5.333 .536 .250 1.297 25 12.00
CR2334 CRN-FLEX 21
(3/4") .545 -
.709 1.050 5.333 .536 .250 1.297 25 12.00
* Nylon Locknut may be ordered separately.
**PG sizes available with minimum order. Contact factory for details.
Application Information
Material:
Body: Polymide
Bushing: Neoprene
Seal: IP 54
Temperature range: -20°C to +80°C
Part Number Thread
Type Diameter
Range
A
Mounting Hole
B
Maximum
Overall
Length
C
Height
D
Length
E
Wrenching
Flats
Dome
F
Wrenching
Flats
R2207 PG 7 .079 - .236 .492 1.516 1.024 .315 .748 .591
R2107 PG 7 .157 - .315 .492 1.516 1.024 .315 .748 .591
R2209 PG 9 .118 - .276 .599 1.850 1.142 .315 .866 .748
R2109 PG 9 .197 - .394 .599 1.850 1.142 .315 .866 .748
R2211 PG 11 .197 - .354 .733 2.008 1.244 .315 .945 .866
R2111 PG 11 .236 - .472 .733 2.008 1.244 .315 .945 .866
R2213 PG 13 .276 - .472 .804 2.154 1.339 .354 1.063 .945
R2113 PG 13 .394 - .551 .804 2.154 1.339 .354 1.063 .945
R2216 PG 16 .315 - .472 .886 2.421 1.504 .394 1.142 1.063
R2116 PG 16 .472 - .669 .886 2.421 1.504 .394 1.142 1.063
R2221 PG 21 .472 - .630 1.115 2.795 1.799 .433 1.417 1.299
R2121 PG 21 .630 - .827 1.115 2.795 1.799 .433 1.417 1.299
R2229 PG 29 .630 - .827 1.457 3.346 2.244 .433 1.811 1.654
R2129 PG 29 .787 - 1.102 1.457 3.346 2.244 .433 1.811 1.654
R1207 PG 7 .079 - .236 .492 1.516 1.024 .315 .748 .591
R1107 PG 7 .157 - .315 .492 1.516 1.024 .315 .748 .591
R1209 PG 9 .118 - .276 .599 1.850 1.142 .315 .866 .748
R1109 PG 9 .197 - .394 .599 1.850 1.142 .315 .866 .748
R1211 PG 11 .197 - .354 .733 2.008 1.244 .315 .945 .866
R1111 PG 11 .236 - .472 .733 2.008 1.244 .315 .945 .866
R1213 PG 13 .276 - .472 .804 2.154 1.339 .354 1.063 .945
R1113 PG 13 .394 - .551 .804 2.154 1.339 .354 1.063 .945
R1216 PG 16 .315 - .472 .886 2.421 1.504 .394 1.142 1.063
R1116 PG 16 .472 - .669 .886 2.421 1.504 .394 1.142 1.063
R1221 PG 21 .472 - .630 1.115 2.795 1.799 .433 1.417 1.299
R1121 PG 21 .630 - .827 1.115 2.795 1.799 .433 1.417 1.299
R1229 PG 29 .630 - .827 1.457 3.346 2.244 .433 1.811 1.654
R1129 PG 29 .787 - 1.102 1.457 3.346 2.244 .433 1.811 1.654
Application Information
Materials:
Body: Polyamide
Seal: Neoprene
Halogen Free Seals Available on Special Order
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6)
Temperature Range: -20°C to +80°C
Dimensional Details
NPT Thread Types
Part
Number Description Thread
Type UL
Status Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Pack
Size
PG Thread - Flex Type - Black
S2407 SLR - FLEX
7PG-7 R .079 -
.197 .492 2.560 .315 .203 .591 100
S2307 SL - FLEX 7 PG-7 R .118 -
.255 .492 2.560 .315 .203 .591 100
S2409 SLR - FLEX
9PG-9 R .079 -
.236 .599 2.970 .315 .218 .750 100
S2309 SL - FLEX 9 PG-9 R .157 -
.314 .599 2.970 .315 .218 .750 100
S2411 SLR - FLEX
11 PG-11 R .118 -
.279 .733 3.510 .315 .218 .866 100
S2311 SL - FLEX
11 PG-11 R .197 -
.394 .733 3.510 .315 .218 .866 100
S2413 SLR - FLEX
13 PG-13 L .295 -
.353 .804 4.020 .354 .218 .945 50
S2313 SL - FLEX
13 PG-13 L .236 -
.472 .804 4.020 .354 .218 .945 50
S2416 SLR - FLEX
16 PG-16 L .423 -
.481 .886 4.540 .394 .234 1.063 50
S2316 SL - FLEX
16 PG-16 L .394 -
.551 .886 4.540 .394 .234 1.063 50
S2421 SLR - FLEX
21 PG-21 L .481 -
.617 1.115 5.293 .433 .250 1.299 25
S2321 SL - FLEX
21 PG-21 L .545 -
.709 1.115 5.293 .433 .250 1.299 25
NPT Thread - Flex Type - Black
S2438 SLRN - FLEX
9 (3/8") NPT-
3/8" R.079 -
.236 .675 3.282 .563 .218 .743 100
S2338 SLN - FLEX
9 (3/8") NPT-
3/8" R.157 -
.314 .675 3.282 .563 .218 .743 100
S2412 SLRN - FLEX
13 (1/2") NPT-
1/2" L.295 -
.353 .825 4.135 .563 .218 .938 50
S2312 SLN - FLEX
13 (1/2") NPT-
1/2" L.236 -
.472 .825 4.135 .563 .218 .938 50
S2434 SLRN - FLEX
21 (3/4") NPT-
3/4" L.481 -
.617 1.050 5.333 .563 .250 1.297 25
S2334 SLN - FLEX
21 (3/4") NPT-
3/4" L.545 -
.709 1.050 5.333 .563 .250 1.297 25
PG Thread - Flex Type - Gray
S1407 SLR - FLEX
7PG-7 R .079 -
.197 .492 2.560 .315 .203 .591 100
S1307 SL - FLEX 7 PG-7 R .118 -
.255 .492 2.560 .315 .203 .591 100
S1409 SLR - FLEX
9PG-9 R .079 -
.236 .599 2.970 .315 .218 .750 100
S1309 SL - FLEX 9 PG-9 R .157 -
.314 .599 2.970 .315 .218 .750 100
S1411 SLR - FLEX
11 PG-11 R .118 -
.279 .733 3.510 .315 .218 .866 100
S1311 SL - FLEX
11 PG-11 R .197 -
.394 .733 3.510 .315 .218 .866 100
S1413 SLR - FLEX
13 PG-13 L .295 -
.353 .804 4.020 .354 .218 .945 100
S1313 SL - FLEX
13 PG-13 L .236 -
.472 .804 4.020 .354 .218 .945 100
S1416 SLR - FLEX
16 PG-16 L .423 -
.481 .886 4.540 .394 .234 1.063 50
S1316 SL - FLEX
16 PG-16 L .394 -
.551 .886 4.540 .394 .234 1.063 50
S1421 SLR - FLEX
21 PG-21 L .481 -
.617 1.115 5.293 .433 .250 1.299 25
S1321 SL - FLEX
21 PG-21 L .545 -
.709 1.115 5.293 .433 .250 1.299 25
NPT Thread - Flex Type - Gray
S1438 SLRN - FLEX
9 (3/8") NPT-
3/8" R.079 -
.236 .675 3.282 .563 .218 .743 100
S1338 SLN - FLEX
9 (3/8") NPT-
3/8" R.157 -
.314 .675 3.282 .563 .218 .743 100
S1412 SLRN - FLEX
13 (1/2") NPT-
1/2" L.295 -
.353 .825 4.135 .563 .218 .938 100
S1312 SLN - FLEX
13 (1/2") NPT-
1/2" L.236 -
.472 .825 4.135 .563 .218 .938 100
S1434 SLRN - FLEX
21 (3/4") NPT-
3/4" L.481 -
.617 1.050 5.333 .563 .250 1.297 50
S1334 SLN - FLEX
21 (3/4") NPT-
3/4" L.545 -
.709 1.050 5.333 .563 .250 1.297 50
1. Locknuts included with PG sizes, but may be ordered separately with NPT thread types.
2. "R" in description indicates reducer bushing.
3. "N" in description indicates NPT thread.
4. All dimensions in inches.
5. Orders of 2000 pieces or more will be bulk packaged unless otherwise requested.
UL Status: R = Recognized; L = Listed
A Lapp Group Company
Application Information
Materials:
Body: Polyamide
Seal: Neoprene
Halogen Free Seals Available on request
Color: Black (RAL 9005)
Gray (RAL 7001)
Lt. Gray (RAL 7035) Available upon request
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6)
Temperature Range: Static: -20°C to +100°C
Dimensional Details
Part
Number
Description
Metric
Thread
Diameter
Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Std.
Pack
Size WT/C
S2707 SL-M FLEX
12X1.5 .138 -
.276 .47 2.52 .315 .203 .591 100 1.25
S2709 SL-M FLEX
16X1.5 .177 -
.394 .63 3.39 .315 .218 .748 100 2.50
S2713 SL-M FLEX
20X1.5 .276 -
.512 .79 3.98 .354 .218 .984 50 4.50
S2716 SL-M FLEX
25X1.5 .354 -
.669 .98 4.92 .394 .234 1.181 25 8.00
S2721 SL-M FLEX
32X1.5 .433 -
.827 1.26 5.87 .394 .250 1.417 25 12.00
S1707 SL-M FLEX
12X1.5 .138 -
.276 .47 2.52 .315 .203 .591 100 1.25
S1709 SL-M FLEX
16X1.5 .177 -
.394 .63 3.39 .315 .218 .748 100 2.50
S1713 SL-M FLEX
20X1.5 .276 -
.512 .79 3.98 .354 .218 .984 50 4.50
S1716 SL-M FLEX
25X1.5 .354 -
.669 .98 4.92 .394 .234 1.181 25 8.00
S1721 SL-M FLEX
32X1.5 .433 -
.827 1.26 5.87 .394 .250 1.417 25 12.00
* Locknuts provided with Metric sizes.
**Orders of 2000 pcs. or more will be bulk packaged unless otherwise specified.
A Lapp Group Company
Application Information
NPT Thread (nylon)
NPT Thread (metallic)
Metric Thread
Part Number Description Color Wrenching
Flats Locknut
Thickness Locknut
Diameter Pack
Size
inches mm inches mm inches mm
5301 9000 GMP-GL 7 Gray .748 19 .197 5.0 .827 21.0 100
5301 9010 GMP-GL 9 Gray .866 22 .197 5.0 .945 24.0 100
5301 9020 GMP-GL 11 Gray .945 24 .197 5.0 1.024 26.0 100
5301 9030 GMP-GL 13 Gray 1.063 27 .236 6.0 1.142 29.0 100
5301 9040 GMP-GL 16 Gray 1.181 30 .236 6.0 1.300 33.0 100
5301 9050 GMP-GL 21 Gray 1.417 36 .276 7.0 1.535 38.9 50
5301 9060 GMP-GL 29 Gray 1.811 46 .276 7.0 1.968 49.9 50
5301 9070 GMP-GL 36 Gray 2.362 60 .315 8.0 2.598 65.9 25
5301 9080 GMP-GL 42 Gray 2.559 65 .315 8.0 2.874 73.0 25
5301 9090 GMP-GL 48 Gray 2.756 70 .315 8.0 3.071 78.0 25
5301 9200 GMP-GL 7 Black .748 19 .197 5.0 .827 21.0 100
5301 9210 GMP-GL 9 Black .866 22 .197 5.0 .945 24.0 100
5301 9220 GMP-GL 11 Black .945 24 .197 5.0 1.024 26.0 100
5301 9230 GMP-GL 13 Black 1.063 27 .236 6.0 1.142 29.0 100
5301 9240 GMP-GL 16 Black 1.181 30 .236 6.0 1.300 33.0 100
5301 9250 GMP-GL 21 Black 1.417 36 .276 7.0 1.535 38.9 50
5301 9260 GMP-GL 29 Black 1.811 46 .276 7.0 1.968 49.9 50
5301 9270 GMP-GL 36 Black 2.362 60 .315 8.0 2.598 65.9 25
5301 9280 GMP-GL 42 Black 2.559 65 .315 8.0 2.874 73.0 25
5301 9290 GMP-GL 48 Black 2.756 70 .315 8.0 3.071 78.0 25
A Lapp Group Company
Application Information
PG Thread
NPT Thread
Part Number Description Color Wrenching
Flats Locknut
Thickness Pack Size
inches mm inches mm
5311 9000 GMP-GL M 12 X 1.5 Gray 0.669 17 .197 5.0 100
5311 9010 GMP-GL M 16 X 1.5 Gray 0.866 22 .197 5.0 100
5311 9020 GMP-GL M 20 X 1.5 Gray 1.024 26 .236 6.0 100
5311 9030 GMP-GL M 25X 1.5 Gray 1.260 32 .236 6.0 100
5311 9040 GMP-GL M 32 X 1.5 Gray 1.614 41 .276 7.0 100
5311 9050 GMP-GL M 40 X 1.5 Gray 1.969 50 .276 7.0 50
5311 9060 GMP-GL M 50 X 1.5 Gray 2.362 60 .315 8.0 50
5311 9070 GMP-GL M 63 X 1.5 Gray 2.953 75 .315 8.0 50
5311 9100 GMP-GL M 12 X 1.5 Black 0.669 17 .197 5.0 100
5311 9110 GMP-GL M 16 X 1.5 Black 0.866 22 .197 5.0 100
5311 9120 GMP-GL M 20 X 1.5 Black 1.024 26 .236 6.0 100
5311 9130 GMP-GL M 25 X 1.5 Black 1.260 32 .236 6.0 100
5311 9140 GMP-GL M 32 X 1.5 Black 1.614 41 .276 7.0 100
5311 9150 GMP-GL M 40 X 1.5 Black 1.969 50 .276 7.0 50
5311 9160 GMP-GL M 50 X 1.5 Black 2.362 60 .315 8.0 50
5311 9170 GMP-GL M 63 X 1.5 Black 2.953 75 .315 8.0 50
A Lapp Group Company
Application Information
Material: Silicone
Seal: IP 54 when all holes are filled
Temperature: -30°C to +100°C
Part Number Fits PG
Size Fits NPT Size Description Number
of Holes Size
of Holes Pack Size
5360 7225 7 - DIX 7225 2 2.5 100
5360 7417 7 - DIX 7417 4 1.7 100
5360 9210 9 3/8 DIX 0921 2 1 100
5360 9320 9 3/8 DIX 0932 3 2 100
5360 9230 9 3/8 DIX 0923 2 3 100
5361 1225 11 - DIX 11225 2 2.5 100
5361 1240 11 - DIX 1124 2 4 100
5361 1330 11 - DIX 1133 3 3 100
5361 1430 11 - DIX 1143 4 3 100
5361 3250 13 1/2 DIX 1325 2 5 100
5361 3340 13 1/2 DIX 1334 3 4 100
5361 3440 13 1/2 DIX 1344 4 4 100
5361 6140 16 - DIX 1614 1 4 50
5361 6240 16 - DIX 1624 2 4 50
5361 6260 16 - DIX 1626 2 6 50
5361 6340 16 - DIX 1634 3 4 50
5361 6350 16 - DIX 1635 3 5 50
5361 6356 16 - DIX 16356 3 5.6 50
5361 6360 16 - DIX 1636 3 6 50
5361 6440 16 - DIX 1644 4 4 50
5361 6450 16 - DIX 1645 4 5 50
5361 6540 16 - DIX 1654 5 4 50
5362 1270 21 3/4 DIX 2127 2 7 50
5362 1280 21 3/4 DIX 2128 2 8 50
5362 1370 21 3/4 DIX 2137 3 7 50
5362 1380 21 3/4 DIX 2138 3 8 50
5362 1460 21 3/4 DIX 2146 4 6 50
5362 1550 21 3/4 DIX 2155 5 5 50
5362 1640 21 3/4 DIX 2164 6 4 50
5362 9290 29 1 DIX 2929 2 9 50
5362 9390 29 1 DIX 2939 3 9 50
5362 9470 29 1 DIX 2947 4 7 50
5362 9480 29 1 DIX 2948 4 8 50
5362 9490 29 1 DIX 2949 4 9 50
5362 9556 29 1 DIX 29556 5 5.6 50
5362 9570 29 1 DIX 2957 5 7 50
A Lapp Group Company
Application Information
Material: NBR Silicon Free
Seal: IP 54
Temperature: -40°C to +100°C
Special shapes available on request
Part Number Fits Metric
Size Description Number
of Holes Size
of Holes Pack Size
5331 6230 M 16 DIX 16230 2 3 mm 100
5331 6240 M 16 DIX 16240 2 4 mm 100
5332 0250 M 20 DIX 20250 2 5 mm 100
5332 0340 M 20 DIX 20340 3 4 mm 100
5332 5260 M 25 DIX 25260 2 6 mm 50
5332 5360 M 25 DIX 25360 3 6 mm 50
5332 5370 M 25 DIX 25370 3 7 mm 50
5332 5450 M 25 DIX 25450 4 5 mm 50
5332 5540 M 25 DIX 25540 5 4 mm 50
5333 2280 M 32 DIX 32280 2 8 mm 50
5333 2380 M 32 DIX 32380 3 8 mm 50
5333 2460 M 32 DIX 32460 4 6 mm 50
5333 2470 M 32 DIX 32470 4 7 mm 50
A Lapp Group Company
Application Information
Material: Polyamide
Part Number DIA x LENGTH
Description Diameter Length Pack Size
inches mm inches mm
5310 0003 DIX-DV 3 X 9 0.118 3 .0354 9 100
5310 0004 DIX-DV 4 X 9 0.157 4 .0354 9 100
5310 0005 DIX-DV 5 X 11 .0197 5 .0433 11 100
5310 0055 DIX-DV 5.5 X 11 0.217 5.5 .0433 1 100
5310 0006 DIX-DV 6 X 14 0.236 6 0.551 14 100
5310 0007 DIX-DV 7 X 14 0.276 7 0.551 14 100
5310 0008 DIX-DV 8 X 14 0.315 8 0.551 14 100
5310 0009 DIX-DV 9 X 14 0.354 9 0.551 14 100
A Lapp Group Company
SKINTOP® SD
Dust-Proof Plug
SKINTOP® SD-M is designed to be used when a SKINTOP® Cord Connector is installed without a cable.
They prevent dust and dirt from entering the housing interior until final cable installation is completed.
They provide easy handling and SKINTOP® disassembly is not required. Simply push the cable through,
and the assembly is complete.
Material: Cork
SKINTOP® DV
Moisture Proof Plug
SKINTOP® DV is made from neoprene. is designed to be used when a SKINTOP® Cord Connector is
installed without a cable. They prevent dust and dirt from entering the housing interior until final cable
installation is completed.
Material: Neoprene
Part Number PG Size NPT Size Pack Size
SKINTOP® SD
5202 5235 SD 7 500
5202 5240 SD 9 3/8" 500
5202 5250 SD 11 250
5202 5260 SD 13 1/2" 250
5202 5270 SD 16 250
5202 5280 SD 21 3/4" 100
5202 5290 SD 19 1" 100
5202 5291 SD 36 100
SKINTOP® DV
5380 0641 DV 9 3/8" 500
5380 0579 DV 11 250
5380 0583 DV 13 1/2" 250
5380 0642 DV 16 250
5380 0643 DV 21 3/4" 100
*"R" in description inidicates reducer bushing
SKINTOP® SD-M
Dust-Proof Plug
SKINTOP® SD-M is made from polyethylene foam to protect the housing from dust. No need to take apart -
just push the cable through.
Material: PE foam
SKINTOP® DV-M
Moisture Proof Plug
SKINTOP® DV-M is made from neoprene. For all assembly work where the cable connection will be made
later on and the inside of the housing needs to be protected against moisture, a SKINTOP® cable
connector together with this sealing should be used.
Material: Neoprene
Part Number Metric Size Pack Size
SKINTOP® SD-M
5411 3100 SD-M 12 100
5411 3110 SD-M 16 100
5411 3120 SD-M 20 100
5411 3130 SD-M 25 50
5411 3140 SD-M 32 50
5411 3150 SD-M 40 25
5411 3160 SD-M 50 25
5411 3170 SD-M 63 25
SKINTOP® DV-M
5411 3000 DV-M 12 100
5411 3010 DV-M 16 100
5411 3020 DV-M 20 100
5411 3030 DV-M 25 50
5411 3040 DV-M 32 50
5411 3050 DV-M 40 25
5411 3060 DV-M 50 25
Application Information
Part Number Description Diameter Range
54028000 EPDM bushing for SL-7 .118 - .255
54028010 EPDM bushing for SL-9 (3/8") .157 - .314
54028020 EPDM bushing for SL-11 .197 - .394
54028030 EPDM bushing for SL-13 (1/2") .236 - .472
54028040 EPDM bushing for SL-16 .394 - .551
54028050 EPDM bushing for SL-21 (3/4") .545 - .709
54028060 EPDM bushing for SL-29 (1") .708 - 1.024
54028070 EPDM bushing for SL-36 .866 - 1.259
54028100 EPDM red. bushing for SL-7 .079 - .197
54028110 EPDM red. bushing for SL-9 (3/8") .079 - .236
54028120 EPDM red. bushing for SL-11 .118 - .279
54028130 EPDM red. bushing for SL-13 (1/2") .295 - .353
54028140 EPDM red. bushing for SL-16 .432 - .481
54028150 EPDM red. bushing for SL-21 (3/4") .481 - .617
54028160 EPDM red. bushing for SL-29 (1") .551 - .827
54028170 EPDM red. bushing for SL-36 .787 - 1.023
A Lapp Group Company
Application Information
Material: Polyamide, glass fibre reinforced
Seal: IP 55
Color: Gray
Part Number Wrench
Size
in/mm
A B C D E Pack
Size
in mm in mm in mm in mm in mm
5310 1000 .748/19 .748 19 .827 21 .906 23 .433 11 .394 10 25
5310 1010 .866/ 22 .866 22 .846 21.5 .984 25 .472 12 .511 13 25
5310 1020 .945/24 .945 24 .945 24 1.063 27 .472 12 .551 14 25
5310 1030 1.063/27 1.063 27 .984 25 1.161 29.5 .511 13 .669 17 10
5310 1040 1.260/32 1.260 32 1.181 30 1.378 35 .591 15 .906 23 10
5310 1050 1.614/41 1.614 41 1.339 34 1.516 38.5 .591 15 1.181 30 10
A Lapp Group Company
Application Information
Materials: Nickel-plated brass Protection: 70 PSI
Seal: Neoprene Seal: IP 68 (Comparable to NEMA 6)
O-Ring: Perbunan (NBR) Temperature Range: -20°C to +80°C
Locknuts
Part
Number
Description
PG Size
SKINTOPTM
Diameter
Range Mounting
Hole
Maximum
Overall
Length
Wrench Flats
Thread
Length
on Lower
Part
Pack
Size
inches mm inches mm inches mm
5201 5700 MS 7 .079 -
.256 2 -
6.5 .492 .985 .551 14 5.0 5.0 100
5201 5710 MS 9 .118 -
.315 3 - 8 .599 1.142 .669 17 6.0 6.0 100
5201 5720 MS 11 .157 -
.394 4 -
10 .733 1.260 .787 20 6.0 6.0 50
5201 5730 MS 13 .197 -
.472 5 -
12 .804 1.339 .866 22 6.5 6.5 50
5201 5740 MS 16 .315 -
.551 8 -
14 .886 1.380 .945 24 6.5 6.5 50
5201 5750 MS 21 .433 -
.709 11 -
18 1.115 1.575 1.181 30 7.0 7.0 25
5201 5760 MS 29 .630 -
.984 16 -
25 1.457 1.890 1.575 40 8.0 8.0 25
5201 5765 MS 36 .748 -
1.260 19 -
32 1.850 2.441 1.969 50 15.0 15.0 10
5201 5766 MS 42 1.102 -
1.496 28 -
38 2.126 2.441 2.244 57 15.0 15.0 5
5201 5767 MS 48 1.339 -
1.732 34 -
44 2.333 2.441 2.520 64 15.0 15.0 5
5201 5770 MSR 7 .079 -
.197 2 - 5 .492 .985 .551 14 5.0 5.0 100
5201 5780 MSR 9 .079 -
.236 2 - 6 .599 1.142 .669 17 6.0 6.0 100
5201 5790 MSR 11 .118 -
.276 3 - 7 .733 1.260 .787 20 6.0 6.0 50
5201 5800 MSR 13 .157 -
.354 4 - 9 .804 1.339 .866 22 6.5 6.5 50
5201 5810 MSR 16 .236 -
.512 6 -
13 .886 1.380 .945 24 6.5 6.5 50
5201 5820 MSR 21 .315 -
.630 8 -
16 1.115 1.575 1.181 30 7.0 7.0 25
5201 5830 MSR 29 .413 -
.787 10.5 -
20 1.457 1.890 1.575 40 8.0 8.0 25
5201 5831 MSR 36 .748 -
1.024 19 -
26 1.850 2.441 1.969 50 15.0 15.0 10
5201 5832 MSR 42 .945 -
1.220 24 -
31 2.126 2.441 2.244 57 15.0 15.0 5
5201 5833 MSR 48 1.102 -
1.378 28 -
35 2.333 2.441 2.520 64 15.0 15.0 5
*"R" in description inidicates reducer bushing
A Lapp Group Company
Application Information
Materials: Nickel-plated brass
Bushing: Neoprene
Halogen Free Bushing available on request
O-Ring: Perbunan (NBR)
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6) when used with O-ring
Temperature Range: -20°C to +80°C
Locknuts
Part
Number Type/Size Diameter
Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Std.
Pack
Size WT/C
5211 5700 MSL 7 .079 - .256 .492 1.260 .472 .110 .551 100 2.50
5211 5710 MSL 9 .118 - .315 .599 1.380 .472 .110 .669 100 4.50
5211 5720 MSL 11 .157 - .394 .733 1.500 .472 .118 .788 50 6.50
5211 5730 MSL 13 .197 - .472 .804 1.560 .472 .118 .866 50 7.00
5211 5740 MSL 16 .315 - .551 .886 1.600 .472 .118 .945 50 8.50
5211 5750 MSL 21 .433 - .709 1.115 1.770 .472 .138 1.181 25 14.50
5211 5760 MSL 29 .630 - .984 1.457 2.170 .519 .157 1.575 25 30.00
5211 5770 MSLR 7 .079 - .197 .492 1.260 .472 .110 .551 100 2.50
5211 5780 MSLR 9 .079 - .236 .599 1.380 .472 .110 .669 100 4.50
5211 5790 MSLR 11 .118 - .276 .733 1.500 .472 .118 .788 50 6.50
5211 5800 MSLR 13 .157 - .354 .804 1.560 .472 .118 .866 50 7.00
5211 5810 MSLR 16 .236 - .512 .886 1.600 .472 .118 .945 50 8.50
5211 5820 MSLR 21 .315 - .630 1.115 1.770 .472 .138 1.181 25 14.50
5211 5830 MSLR 29 .423 - .787 1.457 2.170 .519 .157 1.575 25 30.00
* "R" in description indicates reducer bushing.
Application Information
Materials: Nickel-plated brass
Seal: Neoprene
O-Ring: Perbunan
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6) when used with O-rings
Temperature Range: -20°C to +80°C
Locknuts
Part
Number Type/Size Diameter
Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Std.
Pack
Size WT/C
5311
2000 MS-M 12X1.5 .138 - .276 .470 1.075 .256 .110 .630 100 4.0
5311
2010 MS-M 16X1.5 .177 - .394 .630 1.260 .276 .110 .787 100 6.5
5311
2020 MS-M 20X1.5 .276 - .512 .790 1.400 .315 .118 .945 50 9.0
5311
2030 MS-M 25X1.5 .354 - .669 .980 1.476 .315 .118 1.142 25 13.5
5311
2040 MS-M 32X1.5 .433 - .827 1.260 1.660 .354 .118 1.417 25 23.0
5311
2050 MS-M 40X1.5 .748 -
1.102 1.570 1.949 .354 .138 1.772 10 38.5
5311
2060 MS-M 50X1.5 1.063 -
1.378 1.970 2.047 .394 .157 2.126 5 54.0
5311
2070 MS-M 63X1.5 1.339 -
1.772 2.480 2.413 .591 .197 2.638 5 88.0
5311
2100 MSR-M
12X1.5 .039 - .197 .470 1.075 .256 .110 .630 100 4.0
5311
2110 MSR-M
16X1.5 .079 - .276 .630 1.260 .276 .110 .787 100 6.5
5311
2120 MSR-M
20X1.5 .197 - .394 .790 1.400 .315 .118 .945 50 9.0
5311
2130 MSR-M
25X1.5 .236 - .512 .980 1.476 .315 .118 1.142 25 14.0
5311
2140 MSR-M
32X1.5 .276 - .591 1.260 1.660 .354 .118 1.417 25 23.5
5311
2150 MSR-M
40X1.5 .591 - .906 1.570 1.949 .354 .138 1.772 10 39.5
5311
2160 MSR-M
50X1.5 .866 -
1.142 1.970 2.047 .394 .157 2.126 5 55.0
5311
2170 MSR-M
63X1.5 1.102 -
1.535 2.480 2.413 .591 .197 2.638 5 91.0
* "R" in description indicates reducer bushing.
A Lapp Group Company
Application Information
Materials: Nickel-plated brass
Seal: Neoprene
O-Ring: Perbunan
Halogen Free bushings available on special order
Protection: 70 PSI
Seal: IP 68 (Comparable to NEMA 6) when used with O-rings
Temperature Range: -30°C to +100°C
Locknuts
Part
Number Type/Size Diameter
Range
A
Mounting
Hole
B
Maximum
Overall
Length
C
Thread
Length
D
Wrenching
Nut
Thickness
E
Wrenching
Flats
Std.
Pack
Size WT/C
5311
2005 MS-M-XL
12X1.5 .138 - .276 .470 1.291 .472 .110 .630 100 4.5
5311
2015 MS-M-XL
16X1.5 .177 - .394 .630 1.457 .472 .110 .787 50 7.0
5311
2025 MS-M-XL
20X1.5 .276 - .512 .790 1.555 .472 .118 .945 50 9.5
5311
2035 MS-M-XL
25X1.5 .354 - .669 .980 1.634 .472 .118 1.142 25 14.0
5311
2045 MS-M-XL
32X1.5 .433 - .827 1.260 1.898 .591 .118 1.417 25 23.5
5311
2055 MS-M-XL
40X1.5 .748 -
1.102 1.570 1.949 .591 .138 1.772 10 39.0
5311
2065 MS-M-XL
50X1.5 1.063 -
1.378 1.970 2.047 .591 .157 2.126 5 54.5
5311
2070 MS-M-XL
63X1.5 1.339 -
1.772 2.480 2.143 .591 .197 2.638 5 89.0
5311
2105 MSR-M-XL
12X1.5 .039 - .197 .470 1.291 .472 .110 .630 100 4.5
5311
2115 MSR-M-XL
16X1.5 .079 - .276 .630 1.457 .472 .110 .787 50 7.0
5311
2125 MSR-M-XL
20X1.5 .197 - .394 .790 1.555 .472 .118 .945 50 9.5
5311
2135 MSR-M-XL
25X1.5 .236 - .512 .980 1.634 .472 .118 1.142 25 14.0
5311
2145 MSR-M-XL
32X1.5 .276 - .591 1.260 1.898 .591 .118 1.417 25 23.5
5311
2155 MSR-M-XL
40X1.5 .591 - .906 1.570 1.949 .591 .138 1.772 10 39.0
5311
2165 MSR-M-XL
50X1.5 .866 -
1.142 1.970 2.047 .591 .157 2.126 5 54.5
5311
2170 MSR-M-XL
63X1.5 1.102 -
1.535 2.480 2.143 .591 .197 2.638 5 89.0
* "R" in description indicates reducer bushing.
A Lapp Group Company
Application
Information
Locknuts
MS-SC
Part Number MS-SC
Description Thread
Type Cable Diameter Diameter Required
Over Shielded Core Mounting Thread
Length
SKINTOP® MS-SC…
5311 2210 9 PG 9 .157-.295 .157 .236
5311 2220 11 PG 11 .157-.394 .157 .236
5311 2230 13 PG 13 .197-.472 .157 .256
5311 2240 16 PG 16 .315-.551 .236 .256
5311 2250 21 PG 21 .433-.689 .315 .276
5311 2260 29 PG 29 .630-.984 .512 .315
SKINTOP® MS-SCL…
5311 2310 9 PG 9 .157-.295 .157 .472
5311 2320 11 PG 11 .157-.394 .157 .472
5311 2330 13 PG 13 .197-.472 .157 .472
5311 2340 16 PG 16 .315-.551 .236 .472
5311 2350 21 PG 21 .433-.689 .315 .472
5311 2360 29 PG 29 .630-.984 .512 .591
*"L" in description denotes longer thread mounting length
A Lapp Group Company
Application Information
Material: Body: nickel-plated brass
Seal: IP 20
Part Number Description Diameter Range Largest Diameter
for Installation Thread
Length Pack
Size
in mm in mm in mm
5200 0830 SH 7 .315 - .394 8 - 10 .866 22 .217 5.5 50
5200 0840 SH 9 .394 - .492 10 - 12.5 .984 25 .236 6 50
5200 0850 SH 11 .433 - .591 11 - 15 1.102 28 .236 6 50
5200 0860 SH 13 .551 - .650 14 - 16.5 1.260 32 .295 7.5 25
5200 0870 SH 16 .591 - .709 15 - 18 1.378 35 .295 7.5 25
5200 0880 SH 21 .709 - .925 18 - 23.5 1.811 46 .315 8 25
5200 0890 SH 29 .906 - 1.220 23 - 31 2.284 58 .315 8 10
5200 0900 SH 36 1.142 - 1.594 29 - 40.5 2.756 70 .374 9.5 10
5200 0910 SH 42 1.339 - 1.772 34 - 45 3.071 78 .394 10 5
5200 0920 SH 48 1.535 - 1.969 39 - 50 3.386 86 .453 11.5 5
A Lapp Group Company
Application Information
Material: Body, clamp, screws and bracket of nickel-plated brass
Bushing: Neoprene (CR)
Sealing O-ring : Perbunan (NBR
Seal: IP 55
Part Number Description Diameter Range Largest Diameter
for Installation Thread
Length Pack
Size
in mm in mm in m
5200 5590 SHZ 7 .197 - .236 5 - 6 .827 21 .197 5 50
5200 5600 SHZ 9 .295 - .335 7.5 - 8.5 .984 25 .236 6 50
5200 0930 SHZ 11 .374 - .472 9.5 - 12 1.102 28 .236 6 25
5200 0940 SHZ 13 .492 - .551 12.5 - 14 1.260 32 .256 6.5 25
5200 0950 SHZ 16 .532 - .630 13.5 - 16 1.378 35 .256 6.5 25
5200 0960 SHZ 21 .610 - .827 15.5 - 21 1.811 46 .276 7 25
5200 0970 SHZ 29 .847 - 1.083 21.5 - 27.5 2.284 58 .315 8 10
5200 0980 SHZ 36 1.063 - 1.339 27 - 34 2.756 70 .354 9 10
5200 5610 SHZ 42 1.339 - 1.693 34 - 43 3.071 78 .394 10 5
5200 5620 SHZ 48 1.496 - 1.890 38 - 48 3.386 86 .394 10 5
A Lapp Group Company
Application Information
Material: Body, brackets and screws of nickel-plated brass
Seal: IP 55
Part Number Description Diameter Range Largest Diameter
for Installation Thread
Length Pack
Size
in mm in mm in m
5200 4230 SK 9 .236 - .472 6 - 12 0.945 24 .236 6 50
5200 4240 SK 11 .276 - .591 7 - 15 1.063 27 .236 6 50
5200 4250 SK 13 .472 - .650 12 - 16.5 1.181 30 .295 7.5 25
5200 4260 SK 16 .512 - .709 13 - 18 1.299 33 .295 7.5 25
5200 4270 SK 21 .591 - .906 15 - 23 1.654 42 .315 8 25
5200 2740 SK 29 .787 - 1.220 20 - 31 2.284 58 .315 8 10
A Lapp Group Company
Application Information
Material: Body, saddle clamp, screws and connecting piece of nickel-plated brass
Punched Seal: Neoprene
Sealing O-ring: Perbunan (NBR)
Seal: IP 55
Part Number Description Diameter Range Largest Diameter
for Installation Thread
Length Pack
Size
in mm in mm in m
5200 4280 SKZ 9 .236 - .335 6 - 8.5 .945 24 .236 6 50
5200 4290 SKZ 11 .315 - .472 8 - 12 1.063 27 .236 6 50
5200 4300 SKZ 13 .472 - .551 12 - 14 1.181 30 .256 6.5 25
5200 4310 SKZ 16 .512 - .630 13 - 16 1.299 33 .256 6.5 25
5200 4320 SKZ 21 .591 - .827 15 - 21 1.654 42 .276 7 25
5200 5570 SKZ 29 .787 - 1.083 20 - 27.5 2.284 58 .315 8 10
A Lapp Group Company
Application Information
Material:
Body: Nickel-plated brass
Sealing taper: Neoprene (CR)
O-Ring: Perbunan (NBR)
Seal: IP 68 (Comparable to NEMA 6)
Note: Available with chemical resistant Viton ® bushing.
Part Number Description PG Connection
Thread Diameter Range Wrenching Flats
Upper & Lower ThreadLength Pack
Size
in mm in mm in mm
5200 2530 SHV 7 7 .150 - .189 3.8 - 4.8 .551 14 .197 5 50
5200 2550 SHV 9 9 .189 - .228 4.8 - 5.8 .669 17 .236 6 50
5200 2540 SHV 9 9 .228 - .268 5.8 - 6.8 .669 17 .236 6 50
5200 2570 SHV 11 11 .228 - .268 5.8 - 6.8 .787 20 .236 6 25
5200 2560 SHV 11 11 .268 - .346 6.8 - 8.8 .787 20 .236 6 25
5201 0650 SHV 13 9 .256 - .346 6.5 - 8.8 .866 22 .256 6.5 25
5201 0660 SHV 13 9 .335 - .425 8.5 -
10.8 .866 22 .256 6.5 25
5201 0670 SHV 13 11 .268 - .346 6.8 - 8.8 .866 22 .256 6.5 25
5201 0680 SHV 13 11 .335 - .425 8.5 -
10.8 .866 22 .256 6.5 25
5200 2600 SHV 13 13 .268 - .346 6.8 -
10.8 .866 22 .256 6.5 25
5200 2590 SHV 13 13 .335 - .425 8.5 -
10.8 .866 22 .256 6.5 25
5201 0690 SHV 11 11 .335 - .425 8.5 -
10.8 .945 24 .256 6.5 25
5201 0700 SHV 11 11 .425 - .504 10.8 -
12.8 .945 24 .256 6.5 25
5201 0710 SHV 11 11 .543 - .583 13.8 -
14.8 .945 24 .256 6.5 25
5201 0720 SHV 13 13 .335 - .425 8.5 -
10.8 .945 24 .256 6.5 25
5201 0730 SHV 13 13 .425 - .504 10.8 -
12.8 .945 24 .256 6.5 25
5201 0740 SHV 13 13 .543 - .583 13.8 -
14.8 .945 24 .256 6.5 25
5200 2640 SHV 16 16 .335 - .425 8.5 -
10.8 .945 24 .256 6.5 25
5200 2630 SHV 16 16 .425 - .504 10.8 -
12.8 .945 24 .256 6.5 25
5200 2620 SHV 16 16 .543 - .583 13.8 -
14.8 .945 24 .256 6.5 25
5201 0750 SHV 16 16 .524 - .614 13.3 -
15.6 1.181 30 .276 7 25
5201 0760 SHV 16 16 .622 - .701 15.8 -
17.8 1.181 30 .276 7 25
5201 0770 SHV 16 16 .690 - .780 17.5 -
19.8 1.181 30 .276 7 25
5200 2670 SHV 21 21 .583 - .622 14.8 -
15.8 1.181 30 .276 7 25
5200 2660 SHV 21 21 .622 - .701 15.8 -
17.8 1.181 30 .276 7 25
5200 2650 SHV 21 21 .690 - .780 17.5 -
19.8 1.181 30 .276 7 25
5200 2710 SHV 29 29 .768 - .858 19.5 -
21.8 1.575 40 .315 8 10
5200 2700 SHV 29 29 .858 - .937 21.8 -
23.8 1.575 40 .315 8 10
5200 2690 SHV 29 29 .937 -
1.016 23.8 -
25.8 1.575 40 .315 8 10
A Lapp Group Company
Application
Information
Material: Body: Nickel-plated brass
Grounding sleeve: Polished Brass
O-Ring: Perbunan (NBR)
Sealing taper: Tapered Seal: Neoprene
O-ring: Perbunan (NBR)
Seal: IP 65
Part Number Description PG Connection
Thread Bushing ID Cable Diameter
Inner Jacket Cable Diameter
Inner Jacket Pack
Size
in mm in mm in mm
5201 0400 SHVE 9 9 .236 6 .158 -
.228 4 - 5.8 .158 -
.228 4 - 5.8 25
5201 0405 SHVE 9 9 .276 7 .197 -
.268 5 - 6.8 .197 -
.268 5 - 6.8 25
5201 0415 SHVE 9 9 .236 6 .158 -
.228 4 - 5.8 .158 -
.228 4 - 5.8 25
5201 0420 SHVE 9 9 .276 7 .197 -
.268 5 - 6.8 .197 -
.268 5 - 6.8 25
5201 0425 SHVE 11 11 .276 7 .197 -
.268 5 - 6.8 .197 -
.268 5 - 6.8 25
5201 0430 SHVE 11 11 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5201 0440 SHVE 11 11 .276 7 .197 -
.268 5 - 6.8 .197 -
.268 5 - 6.8 25
5201 0450 SHVE 11 11 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5201 0460 SHVE 13 13 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5201 0490 SHVE 13 13 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5200 5070 SHVE 13 13 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5201 0470 SHVE 13 13 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5201 0500 SHVE 13 13 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5200 5080 SHVE 13 13 .354 9 .268 -
.346 6.8 - 8.8 .268 -
.346 6.8 - 8.8 25
5201 0480 SHVE 13 13 .433 11 .335 -
.425 8.5 - 10.8 .335 -
.425 8.5 - 10.8 25
5201 0510 SHVE 13 13 .433 11 .335 -
.425 8.5 - 10.8 .335 -
.425 8.5 - 10.8 25
5200 5090 SHVE 13 13 .433 11 .335 -
.425 8.5 - 10.8 .335 -
.425 8.5 - 10.8 25
5201 0520 SHVE 16 16 .433 11 .335 -
.425 8.5 - 10.8 .335 -
.425 8.5 - 10.8 25
5201 0560 SHVE 13 13 .433 11 .335 -
.425 8.5 - 10.8 .335 -
.425 8.5 - 10.8 25
5200 5100 SHVE 16 16 .433 11 .335 -
.425 8.5 - 10.8 .335 -
.425 8.5 - 10.8 25
5201 0530 SHVE 16 16 .512 13 .425 -
.504 10.8 -
12.8 .425 -
.504 10.8 -
12.8 25
5201 0570 SHVE 16 16 .512 13 .425 -
.504 10.8 -
12.8 .425 -
.504 10.8 -
12.8 25
5201 5110 SHVE 16 16 .512 13 .425 -
.504 10.8 -
12.8 .425 -
.504 10.8 -
12.8 25
5201 0540 SHVE 16 16 .512 13 .425 -
.504 10.8 -
12.8 .425 -
.504 10.8 -
12.8 25
5201 0580 SHVE 16 16 .512 13 .425 -
.504 10.8 -
12.8 .425 -
.504 10.8 -
12.8 25
5200 5120 SHVE 16 16 .512 13 .425 -
.504 10.8 -
12.8 .425 -
.504 10.8 -
12.8 25
5201 0550 SHVE 16 16 .591 15 .543 -
.583 13.8 -
14.8 .543 -
.583 13.8 -
14.8 25
5201 0590 SHVE 16 16 .591 15 .543 -
.583 13.8 -
14.8 .543 -
.583 13.8 -
14.8 25
5200 5130 SHVE 16 16 .591 15 .543 -
.583 13.8 -
14.8 .543 -
.583 13.8 -
14.8 25
5201 0600 SHVE 21 21 .630 16 .551 -
.622 14.0 -
15.8 .551 -
.622 14.0 -
15.8 25
5200 5140 SHVE 21 21 .630 16 .551 -
.622 14.0 -
15.8 .551 -
.622 14.0 -
15.8 25
5201 0610 SHVE 21 21 .630 16 .551 -
.622 14.0 -
15.8 .551 -
.622 14.0 -
15.8 25
5200 5150 SHVE 21 21 .630 16 .551 -
.622 14.0 -
15.8 .551 -
.622 14.0 -
15.8 25
5201 0620 SHVE 21 21 .709 18 .622 -
.701 15.8 -
17.8 .622 -
.701 15.8 -
17.8 25
5200 5160 SHVE 21 21 .709 18 .622 -
.701 15.8 -
17.8 .622 -
.701 15.8 -
17.8 25
5201 0630 SHVE 21 21 .709 18 .622 -
.701 15.8 -
17.8 .622 -
.701 15.8 -
17.8 25
5200 5170 SHVE 21 21 .709 18 .622 -
.701 15.8 -
17.8 .622 -
.701 15.8 -
17.8 25
5201 0640 SHVE 21 21 .787 20 .689 -
.780 17.5 -
19.8 .689 -
.780 17.5 -
19.8 25
5200 5180 SHVE 21 21 .787 20 .689 -
.780 17.5 -
19.8 .689 -
.780 17.5 -
19.8 25
5200 5190 SHVE 29 29 .866 22 .768 -
.858 19.5 -
21.8 .768 -
.858 19.5 -
21.8 10
5200 5200 SHVE 29 29 .866 22 .768 -
.858 19.5 -
21.8 .768 -
.858 19.5 -
21.8 10
5200 5210 SHVE 29 29 .945 24 .846 -
.937 21.5 -
23.8 .846 -
.937 21.5 -
23.8 10
5200 5220 SHVE 29 29 .945 24 .846 -
.937 21.5 -
23.8 .846 -
.937 21.5 -
23.8 10
Application
Information
Material: Body, saddle clamp, screws and bracket of nickel-plated brass
Bushing: Flame Resistant Neoprene
Sealing O-ring: Perbunan (NBR)
Seal: IP 65
Part Number PG Thread
Type Diameter Range Largest Diameter
for Installation Thread
Length Pack
Size
in mm in mm in mm
5200 0990 SR 07/05 .138 - .197 3.5 - 5 .906 23 .197 5 50
5200 1000 SR 09/07 .217 - .276 5.5 - 7 .984 25 .236 6 50
5200 1010 SR 11/07 .217 - .276 5.5 - 7 1.102 28 .236 6 25
5200 1020 SR 11/09 .295 - .354 7.5 - 9 1.102 28 .236 6 25
5200 1030 SR 13/09 .295 - .354 7.5 - 9 1.260 32 .256 6.5 25
5200 1040 SR 13/11 .354 - .433 9 - 11 1.260 32 .256 6.5 25
5200 1050 SR 13/13 .433 - .512 11 - 13 1.260 32 .256 6.5 25
5200 1060 SR 16/13 .453 - .512 11.5 - 13 1.378 35 .256 6.5 25
5200 1070 SR 16/15 .512 - .591 13 - 15 1.378 35 .256 6.5 25
5200 1080 SR 21/15 .531 - .591 13.5 - 15 1.811 46 .276 7 25
5200 1090 SR 21/17 .591 - .669 15 - 17 1.811 46 .276 7 25
5200 1100 SR 21/19 .669 - .748 17 - 19 1.811 46 .276 7 25
5200 1110 SR 21/20 .709 - .787 18 - 20 1.811 46 .276 7 25
5200 1120 SR 29/20 .709 - .787 18 - 20 2.323 59 .315 8 10
5200 1130 SR 29/23 .827 - .906 21 - 23 2.323 59 .315 8 10
5200 1140 SR 29/25 .906 - .984 23 - 25 2.323 59 .315 8 10
5200 1150 SR 36/26 .906 - 1.024 23 - 26 2.756 70 .354 9 5
5200 1160 SR 36/30 1.063 - 1.181 27 - 30 2.756 70 .354 9 5
5200 1170 SR 36/33 1.181 - 1.299 30 - 33 2.756 70 .354 9 5
5200 1180 SR 36/35 1.260 - 1.378 32 - 35 2.756 70 .354 9 5
5200 1190 SR 42/35 1.260 - 1.378 32 - 35 2.953 75 .394 10 5
5200 1200 SR 42/38 1.378 - 1.496 35 - 38 2.953 75 .394 10 5
5200 1210 SR 42/40 1.417 - 1.575 36 - 40 2.953 75 .394 10 5
5200 1220 SR 48/40 1.417 - 1.575 36 - 40 3.268 83 .394 10 1
5200 1230 SR 48/44 1.575 - 1.732 40 - 44 3.268 83 .394 10 1
Application Information
Material: Body: Nickel-plated brass
Seal: Neoprene
Seal: IP 54
15 mm thread length available on special order
O-rings available:Perbunan, Olflon ® , Viton ®
Part
Number Description Diameter
Range Overall
Length MAX
Wrenching
Flats
Upper
Wrenching
Flats
Lower Part
Thread
Length Pack
Size
in mm in mm in mm in mm in mm
5200 5540 SVRE 9 .295 -
.394 7.5 -
10 .890 22.6 .591 15 .669 17 .236 6 100
5200 0310 SVRE 11 .295 -
.492 7.5 -
12.5 .890 22.6 .709 18 .787 20 .236 6 50
5200 0320 SVRE 13 .295 -
.492 7.5 -
12.5 1.028 26.1 .787 20 .866 22 .256 6.5 50
5200 0330 SVRE 16 .295 -
.591 7.5 -
15 1.067 27.1 .866 22 .945 24 .256 6.5 50
5200 0340 SVRE 21 .394 -
.748 10 -
19 1.165 29.6 1.102 28 1.181 30 .276 7 50
5200 0350 SVRE 29 .709 -
1.063 18 -
27 1.283 32.6 1.457 37 1.575 40 .315 8 50
5200 0360 SVRE 36 .984 -
1.378 25 -
35 1.520 38.6 1.850 47 1.969 50 .354 9 20
5200 5550 SVRE 42 1.398 -
1.811 35.5 -
46 1.717 43.6 2.126 54 2.244 57 .394 10 10
5200 5560 SVRE 48 1.594 -
1.988 40.5 -
50.5 1.776 45.1 2.362 60 2.520 64 .394 10 10
A Lapp Group Company
Application Information
Material: Body of nickel-plated die-cast zinc.
Pressure screw and hexagon nut of nickel-plated brass.
Punched seal of Neoprene
Seal: IP 55
Sealing O-Ring: Gray
Part Number Description
Cable
Diameter
Range A C D G Pack
Size
in mm in mm in mm in mm
5200 4180 RWV 7 .197 5 .81 1.02 26 .33 8.5 .55 14 25
5200 4190 RWV 9 .197 - .315 5 - 8 .93 1.10 28 .37 9.5 .67 17 25
5200 4200 RWV 11 .275 - .492 7 - 12.5 1.02 1.24 31.5 .39 10 79 20 25
5200 4210 RWV 13 .275 - .630 7 - 16 1.12 1.36 34.5 .41 10.5 .87 22 25
5200 4220 RWV 16 .315 - .630 8 - 16 1.22 1.4 35.5 .43 11 .94 24 10
5200 5420 RWV 21 .433 - .787 11 - 20 1.32 1.67 42.5 .45 11.5 1.18 30 10
5200 4225 RWV 29 .748 - 1.220 19 - 31 1.7 2.32 59 .51 13 1.57 40 10
A Lapp Group Company
Brass hole plugs are for use when existing PG-threaded holes are not yet, or no longer required.
Material: Nickel-plated brass
Part Number PG Size Pack Size
5200 2680 BL 7 100
5200 3390 BL 9 100
5200 3400 BL 11 100
5200 3410 BL 13 100
5200 3420 BL 16 100
5200 3430 BL 21 50
5200 3440 BL 29 50
5200 3450 BL 36 50
5200 3460 BL 42 25
5200 2790 BL 48 25
A Lapp Group Company
Application Information
Material: Nickel-plated brass
Part Number Description Wrenching Flats Thickness Pack Size
in mm in mm
5200 3490 SM 7 .591 15 .110 2.8 100
5200 3500 SM 9 .709 18 .110 2.8 100
5200 3510 SM 11 .827 21 .118 3 100
5200 3520 SM 13 .906 23 .118 3 100
5200 3530 SM 16 1.024 26 .118 3 100
5200 3540 SM 21 1.260 32 .138 3.5 50
5200 3550 SM 29 1.614 41 .157 4 50
5200 3560 SM 36 2.008 51 .197 5 25
5200 3570 SM 42 2.362 60 .197 5 25
5200 3580 SM 48 2.520 64 .217 5.5 25
A Lapp Group Company
Application Information
Material: Nickel-plated brass
Part Number Description Pack Size
5210 3750 MR 9 to 7 100
5200 3760 MR 11 to 7 100
5200 3770 MR 11 to 9 100
5200 3780 MR 13 to 7 100
5200 3790 MR 13 to 9 100
5200 3800 MR 13 to 11 100
5200 3810 MR 16 to 7 100
5200 3820 MR 16 to 9 100
5200 3830 MR 16 to 11 100
5200 3840 MR 16 to 13 100
5200 3850 MR 21 to 11 50
5200 3860 MR 21 to 13 50
5200 3870 MR 21 to 16 50
5200 3880 MR 29 to 13 50
5200 3890 MR 29 to 16 50
5200 3900 MR 29 to 21 50
5200 3910 MR 36 to 16 50
5200 3920 MR 36 to 21 50
5200 3930 MR 36 to 29 50
5200 3940 MR 42 to 29 25
5200 3950 MR 42 to 36 25
5200 3970 MR 48 to 36 25
5200 3980 MR 48 to 42 25
A Lapp Group Company
Application Information
Material: Perbunan (NBR), black
Temperature Range: -20°C to +100°C
Part Number Description Inner Diameter Thickness Pack Size
in mm in mm
5300 1035 O 7 .394 10 .059 1.5 500
5200 5730 O 9 .512 13 .059 1.5 500
5300 1020 O 11 .630 16 .059 1.5 500
5200 5740 O 13 .709 18 .059 1.5 500
5300 1030 O 16 .787 20 .059 1.5 500
5200 5750 O 21 1.024 26 .079 2.0 500
5300 1040 O 29 1.339 34 .079 2.0 100
5200 5760 O 36 1.732 44 .079 2.0 100
5300 1050 O 42 1.969 50 .079 2.0 100
5200 5770 O 48 2.165 55 .079 2.0 100
A Lapp Group Company
Lapp North America
Distributor Locator
