A–52
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
8060 Series
Alter nate Action and Momentary Pushbutton Switches
Features/Benefits
•
Long travel
•
Available with LED
•
Long life contact design
•
Epoxy terminial seal
compatabile with bottom
wash cleaning
•
RoHS compliant models
available
Typical Applications
•
Instrumentation
•
Computers and peripherals
•
Telecommunications and
networking equipment
Specifications
CONTACT RATING: Q contact material: 6 AMPS @ 120 V AC
or 28 V DC; 3 AMPS @ 250 V AC. See page A-59 for
additional ratings.
ELECTRICAL LIFE: 50,000 make-and-break cycles at full load.
CONTACT RESISTANCE: Below 20 mΩtyp. initial @
2-4 V DC, 100 mA, for both silver and gold plated contacts.
INSULATION RESISTANCE: 109Ωmin.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
OPERATING TEMPERATURE: –30ºC to 65ºC
SOLDERABILITY: Per MIL-STD-202F method 208D, or
EIA RS-186E method 9 (1 hour steam aging).
CAP INSTALLATION FORCE: 10 lbs. maximum permissible.
NOTE: Any models supplied with P, R, S, Q, B or G contact material are RoHS compliant.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Materials
CASE: Glass filled nylon 6/6 or diallyl phthalate (DAP),
flame retardant (UL 94V-0).
PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled
polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated.
CAP & FRAME: Nylon, black standard.
BUSHING: Brass or zinc, nickel plated.
HOUSING: Stainless steel.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
END CONTACTS: Q contact material: Coin silver, silver plated.
See page A-59 for additional contact materials.
CENTER CONTACT & ALL TERMINALS: Q contact material: Copper
alloy, silver plated. See page A-59 for additional contact materials.
TERMINAL SEAL: Epoxy.Refer to soldering and cleaning
in Technical Data Chapter.
HARDWARE: Nut & Locking Ring: Brass, nickel plated;
Lockwasher: Steel, nickel plated.
Build-A-Switch
Toorder,simply select desired option from each category and place in the appropriate box. Available options areshown
and described on pages A-53 thru A-61. For additional options not shown in catalog, consult Customer Service Center. All
models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods.
Switch Function
8161 SPDT On-On
8168 SPDT On-Mom.
8261 DPDT On-On
Actuator or Plunger
S.710" high plunger
with .375" dia. cap
J80 Snap-in
J81 Snap-in with frame
J82 Snap-in with frame for LED
J86 Snap-in with frame & LED
L.740" high plunger with
.395" dia. cap
L1 .740" high plunger with
.590" dia. cap
S1 .615" high plunger with
.200" dia. cap
S2 .710" high plunger with
.310" dia. cap
Bushing
H.300" high, flat, hi torque
H9 .300" high, flat, hi torque
NONE No bushing choice required
Y3 7.6mm, keyway
Contact Material
BGold
PGold, matte-tin
QSilver
SSilver, matte-tin
GGold over silver
RGold over silver,
matte-tin
Seal
EEpoxy
IEpoxy potted base
Cap Color
2Black
1White
3Red
4Orange
5Yellow
9Gray
Frame Color
2Black
LED Color
3Red
NONE Models without LED
Models Available
Terminations
ARight angle, PC thru-hole
AV2 Vertical right angle,
PC thru-hole
CPC Thru-hole
ZSolder lug
A3 Right angle, snap-in, PC thru-hole
AV3 Vertical right angle,snap-in,
PC thru-hole
V3 .460" high,V-bracket
V4 .630" high,V-bracket
V6 .460" high,V-bracket
V21 .555" high, snap-in V-bracket
V31 .460" high, snap-in V-bracket
W.750" long, wire wrap
Z3 Quick connect
A
Pushbutton
A–53
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
SWITCH FUNCTION
*
PANEL MOUNTING
*
PANEL MOUNTING
*
PANEL MOUNTING
ACTUATOR—SNAP-IN FRONT MOUNT
DPDT
2-1,5-42-3,5-6ONON
8261
DP
SPDT
2-1
2-1
2-3
2-3
ON
MOM.
ON
ON
8161
8168
SP
SCHEMATIC
CONNECTED TERMINALS
POS. 1 POS. 2
SWITCH FUNCTION
POS. 1 POS. 2
MODEL NO.
NO.
POLES
SPDT
DPDT
Terminal Nos.
For Reference Only
Terminal Nos.
For Reference Only
Part number shown: 8161SHZQE
Part number shown: 8261SHZQE
MOM. = Momentary
Cap Finish: matte.
Other colors available, consult
Customer Service Center.
Available with C, W, Z or
Z3 terminations.
NOTE: Caps & frames available
separately, see pages A-60 and A-61.
*Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,41/2,18)
thick panels.
*Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,41/2,18)
thick panels.
All models with all options when ordered with G, L, M or Q contact material.
C&K marking this side C&K marking this side
2BLACK
1WHITE
3RED
4ORANGE
5YELLOW
9GRAY
CAP COLOR
OPTION
CODE
J80 SNAP-IN
J81 SNAP-IN WITH BLACK FRAME
ACTUATOR OR PLUNGER
CAP COLOR
A
Pushbutton
A–54
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
ACTUATOR—SNAP-IN FRONT MOUNT
ACTUATOR—SNAP-IN FRONT MOUNT
*
PANEL MOUNTING
*Increase this dimension to
.620/.625 (15,75/15,88)
for .091/.125 (2,31/3,18)
thick panels.
8161J86ZQE223
SPDT
LED not included.
For LED information, see page A-61.
NOTE: Caps & frames available
separately, see pages A-60 and A-61.
Other colors available, consult
Customer Service Center.
2BLACK
1WHITE
3RED
4ORANGE
5YELLOW
9GRAY
CAP COLOR
OPTION
CODE
3RED
LED COLOR
OPTION
CODE
2BLACK
1WHITE
3RED
4ORANGE
5YELLOW
9GRAY
CAP COLOR
OPTION
CODE
Available with C, W, Z or Z3 terminations.
NOTE: Caps & frames available
separately, see pages A-60 and A-61.
Other colors available, consult
Customer Service Center.
Available with C, W, Z or Z3 terminations and SPDT models only.
For LED information, see page A-59.
ACTUATOR OR PLUNGER
CAP COLOR
ACTUATOR OR PLUNGER
CAP COLOR
LED COLOR
J86 SNAP-IN WITH BLACK FRAME AND LED
J82 SNAP-IN WITH BLACK FRAME FOR LED
A
Pushbutton
A–55
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
PLUNGER
BUSHING
1/4± 40 UNS-2A
NONE NO BUSHING CHOICE REQUIRED
(JXX ACTUATORS) Y3 7.6mm THREADED, KEYWAY
H9 .300" HIGH UNTHREADED, FLAT
H.300" HIGH THREADED, FLAT
L1 PLUNGER WITH CAP P/N 8940
LPLUNGER WITH CAP P/N 8941
S2PLUNGER WITH CAP P/N 8018S1PLUNGER WITH CAP P/N 7089SPLUNGER WITH CAP P/N 7527
2BLACK
1WHITE
3RED
4ORANGE
5YELLOW
9GRAY
CAP COLOR
OPTION
CODE
NOTE: When selecting plunger and cap option, bushing selection must also be made, see below.
Withstands 12 in./lbs. of torque with no distortion.
Hbushing standard with C, W, Z or Z3 terminations.
H9 bushing standard with A, A3, AV2, AV3, or
V3-V31 terminations.
Withstands 12 in./lbs. of torque with no distortion.
Cap Finish: gloss. Cap supplied not installed.
Other colors available, consult Customer
Service Center.
NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings.
Optional mounting nut and locking ring styles and finishes available, see section “Technical Data and
Additional Hardware”.
NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected.
ACTUATOR OR PLUNGER
CAP COLOR
A
Pushbutton
A–56
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
8060 Series
Alter nate Action and Momentary Pushbutton Switches
TERMINATIONS
SECTIONA-A
.130
(3,3)
.138
(3,51)
PC MOUNTING
PC MOUNTING
.750
(19,05)
ARIGHT ANGLE, PC THRU-
HOLE
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
WWIRE WRAP
CPC THRU-HOLE
Z3 QUICK CONNECT
ZSOLDER LUG
SPDT and DPDT
SPDT and DPDT
SPDT and DPDT
SPDT and DPDT
8161SH9ABE2
SPDT
Not available with P, S or R contact material.
Mating quick connector available;
order part number 530100000, page A-61.
Not available with P, S or R contact material.
Not available with I seal.
Terminal bend radii and lead-in manufacturing option. NOTE: PC patternmust clear switch support leg.
Third Angle
Projection
A
Pushbutton
A–57
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
TERMINATIONS
PC MOUNTING
SECTION A-A
PC MOUNTING
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
ARIGHT ANGLE, PC THRU-HOLE
8161SH9AV2BE2
SPDT
8261SH9ABE2
DPDT
A3 RIGHT ANGLE, SNAP-IN, PC THRU-HOLE
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
A
Pushbutton
A–58
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
TERMINATIONS
SECTION A-A
PC MOUNTING
PC MOUNTING
PC MOUNTING
Not available with I seal.
Not available with I seal.
Not available with I seal.
Terminal bend radii and lead-in manufacturing option.
V21 VERTICAL MOUNT,V-BRACKET, SNAP-IN
V6 VERTICAL MOUNT,V-BRACKET
V21 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V6 VERTICAL MOUNT, V-BRACKET
AV3 VERTICAL RIGHT ANGLE, SNAP-IN, PC THRU-HOLE,
.150" PITCH
AV2 VERTICAL RIGHT ANGLE, PC THRU-HOLE, .150" PITCH
V21 .555 (14,10)
V6 .460 (11,68)
DIM ‘A’
OPTION
CODE
V21 .555 (14,10)
V6 .460 (11,68)
DIM ‘A’
OPTION
CODE
8261SH9AV2BE2
DPDT
8161SH9__BE2
SPDT
8261SH9__BE2
DPDT
A
Pushbutton
A–59
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
CONTACT MATERIAL
SNAP-IN
PC MOUNTING
PC MOUNTING
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4 VERTICAL MOUNT, V-BRACKET
V31 VERTICAL MOUNT, V-BRACKET, SNAP-IN
V3, V4 VERTICAL MOUNT, V-BRACKET
Not available with I seal.
Not available with I seal.
8161SH9__BE2
SPDT
8261SH9__BE2
DPDT
V3, V31 .460 (11,68)
V4 .630 (16,00)
DIM ‘A’
OPTION
CODE
V3, V31 .460 (11,68)
V4 .630 (16,00)
DIM ‘A’
OPTION
CODE
1CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate.
2END CONTACTS: Coin silver, with gold plate over nickel plate.
3CENTER CONTACTS & ALL TERMINALS: Copper alloy,with gold plate
over nickel plate.
4END CONTACTS: Coin silver, silver plated.
5CENTER CONTACT & ALL TERMINALS: Copper alloy,silver plated.
6TERMINALS: Copper alloy, with matte-tin over nickel plate.
NOTE: Any models supplied with P, S, R,Q, B or G contact material are
RoHS compliant.
All models with all options when ordered with S, R, G, L, M or Q
contact material.
Bcontact material standard with all terminations except C, Z & Z3.
Qcontact material standard with C, Z & Z3 terminations.
P, S & R contact materials not available with Z & Z3 terminations.
K, L and M options represent Non RoHS tin lead product and are not recommended
for new designs. For additional information please contact Customer Service.
A
Pushbutton
OPTION
CODE CONTACT
MATERIAL TERMINAL
PLATING RATINGS
SILVER 5
MATTE-TIN 6
GOLD 1
SILVER 4,5
GOLD OVER
SILVER 2,3
GOLD 3
MATTE-TIN 6
GOLD 1
MATTE-TIN 6LOW LEVEL/DRY CIRCUIT
POWER
LOW LEVEL/DRYCIRCUIT OR POWER
0.4 VA MAX. @ 20 V AC OR DC MAX.
6AMPS @ 120 V AC OR 28 V DC;
3AMPS @ 250 V AC.
0.4 VAMAX @ 20 V AC OR DC MAX. OR
6AMPS @ 120 V AC OR 28 V DC;
3AMPS @ 250 V AC.
B
P
Q
S
G
R
TERMINATIONS
*Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications.
A–60
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
8060 Series
Alter nate Action and Momentary Pushbutton Switches
SEAL
AVAILABLE HARDWARE
.200 DIA.
(5,08 )
.120
(3,05)
.155
(3,94)
IEPOXY POTTED BASEEEPOXY SEAL
NOTE: Available with C, W, Z, Z3 terminations only.
Cap
PART NO.
708901000 WHITE
708902000 BLACK
708903000 RED
708904000 ORANGE
708905000 YELLOW
708909000 GRAY
Material: Nylon
Finish: Gloss
Cap
PART NO.
752701000 WHITE
752702000 BLACK
752703000 RED
752704000 ORANGE
752705000 YELLOW
752709000 GRAY
Material: Nylon
Finish: Gloss
Cap
PART NO.
801801000 WHITE
801802000 BLACK
801803000 RED
801804000 ORANGE
801805000 YELLOW
801809000 GRAY
Material: Nylon
Finish: Gloss
Cap, Snap-fitting plunger
PART NO.
894001000 WHITE
894002000 BLACK
894003000 RED
894004000 ORANGE
894005000 YELLOW
894009000 GRAY
Material: Nylon
Finish: Gloss
Cap, Snap-fitting plunger
PART NO.
894101000 WHITE
894102000 BLACK
894103000 RED
894104000 ORANGE
894105000 YELLOW
894109000 GRAY
Material: Nylon
Finish: Gloss
Cap, J80, J81 & J82 options only
PART NO.
484601000 WHITE
484602000 BLACK
484603000 RED
484604000 ORANGE
484605000 YELLOW
484609000 GRAY
Material: Nylon
Finish: Gloss
Frame
PART NO.
613302263 BLACK
Material: Nylon
Finish: Matte
Frame
PART NO.
615602263 BLACK
Material: Nylon
Finish: Matte
Cap, J86 & J96 options only
PART NO.
459701000
459702000
459703000
459704000
459705000
459709000
Material: Nylon
Finish: Gloss
PART NO.
476801000 WHITE
476802000 BLACK
476803000 RED
476804000 ORANGE
476805000 YELLOW
476809000 GRAY
Material: Nylon
Finish: Matte
PART NO.
798201000 WHITE
798202263 BLACK
798203000 RED
798204000 ORANGE
798205000 YELLOW
798209000 GRAY
Material: Nylon
Finish: Matte
NOTE: Additional nuts, locking rings and lockwashers available separately, see section
“Technical Data and Additional Hardware”.
Other cap & frame colors available, consult Customer Service Center.
A
Pushbutton
A–61
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
Third Angle
Projection
.030
(0,76)
.200 DIA.
(5,08˘)
.025 SQ.
TYP. (0,63)
.750
(19,05)
.340
(8,64)
.230 DIA.
(5,84˘)
Flat denotes
cathode.
Suggested LED for J82 & J84 options.
Dimensions for reference only.
TYPICAL APPLICATION
Fits Z3 Termination
female connector
PART NO.
530100000
Available in loose pieces.
Above frames (part nos. 432XXXXXX) arealso available with insert which accepts LED for
indicator light assembly.Order insert separately from frame. Blank insert panel (without hole
for LED) also available. LED not included.
Special colors, custom markings available, consult Customer Service Center.
PANEL INSERT
WITH HOLE FOR LED
PART NO.
894902000
BLANK PANEL INSERT
WITHOUT HOLE FOR LED
PART NO.
476602000 BLACK
.047" (1,19) PANEL THK.
PART NO.
432502263
.062" (1,57) PANEL THK.
PART NO.
432602263
.090" (2,29) PANEL THK.
PART NO.
432702263
.125" (3,18) PANEL THK.
PART NO.
432802263 BLACK
Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC
mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and
frame. Available in two basic styles and four panel thicknesses .047-.125 in. Material: Nylon. Finish: Matte.
LED INFORMATION
SWITCHES WITH LED SUPPLIED: J86 OPTION:
Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable.
The following specifications apply:
Process Information: Soldering to LED leads must be completed within 5 seconds at
500ºF (260ºC) maximum.
Caution: Circuit elements must limit forward current of LED to 50mA max. continuous.
*Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center.
LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and
is wired externally.
125 mW
75 mW
125 mW
50 mA
30 mA
50 mA
2.5 V
20 mA
10 mA
20 mA
2.1 V
1.0 mcd
0.5 mcd
4.0 mcd
Green
Red*
Yellow
6
3
5
MAX RATINGS AT 25ºC AMBIENT TEMPERATURE
FORWARD CONTINUOUS POWER
VOLTAGE FORWARD CURRENT DISSIPATION
TYP.
FORWARD
CURRENT
TYP.
FORWARD
VOLTAGE
TYP.
INTENSITYCOLOR
OPTION
CODE
Panel Inserts
AVAILABLE HARDWARE
8060 Series
Alter nate Action and Momentary Pushbutton Switches
A
Pushbutton
