Product Data Sheet hm2.0 Female connector, type B22, Part No. 244-22300-15 Illustration similar Perpendicular Press-fit 110 contacts termination length 2.9 mm for PCB 1.44 mm with shielding tested according to IEC 61076-4-101 to product on www.ept.de to product group hm 2.0 Version from 17.08.2020, 20:27 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 1 Product Data Sheet hm2.0 Female connector, type B22, Part No. 244-22300-15 Technical Specifications Basics Specification Performance Level No. of Contacts Termination Technology Termination Length Operating Temperature Range IEC 61076-4-101 2 110 Press-fit 2.9 mm -55C to +125C Material Insulator Material PBT glass filled, UL 94 V-0 Contact Material Bronze Pitch 2.0 mm Mechanical Mating Force per Pin Separating Force per Pin Durability Contact: max. 0.75 N, Shielding: max. 1 N Contact: min. 0.15 N, Shielding: min. 0.15 N > 250 mating cycles Electrical Operational Current 1.5 A @ +20C, 1.0 A @ +70C Contact Resistance max. 20 m Clearance and Creepage Insulation Resistance 0.6 mm min. 104 M Test Voltage 750 V r.m.s Data Transfer Rate 3.125 Gbit/s Approval / Compliance UL file Environment E130314 RoHS compliant Version from 17.08.2020, 20:27 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 2 Product Data Sheet hm2.0 Female connector, type B22, Part No. 244-22300-15 Derating Diagram Version from 17.08.2020, 20:27 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 3 Product Data Sheet hm2.0 Female connector, type B22, Part No. 244-22300-15 Hole Specifications Plated through-hole according to IEC 60352-5 Material Nominal Hole A PCB Thickness B Plated Hole imm. Sn printed circuit boards O 0.6 mm min 1.44 mm O 0.60 0.05 mm C Drill Hole 0.70 0.02 mm D Cu Plating min. 25 m E Surface F Annular Ring Material Nominal Hole A PCB Thickness B Plated Hole max. 1.5 m; imm. Sn plating min. 0.1 mm Ni, Au printed circuit boards O 0.6 mm min 1.44 mm O 0.60 0.05 mm C Drill Hole 0.70 0.02 mm D Cu Plating min. 25 m E Surface F Annular Ring Material Nominal Hole A PCB Thickness B Plated Hole Ni, Au plating, 0.05 - 0.2 m Au over 2.5 - 5 m Ni min. 0.1 mm pure Cu printed circuit boards O 0.6 mm min 1.44 mm O 0.60 0.05 mm C Drill Hole 0.70 0.02 mm D Cu Plating min. 25 m E Surface F Annular Ring Material Nominal Hole A PCB Thickness B Plated Hole OSP*,z.B. GLICOAT-SMD (F2) with 0.12 0.15 m min. 0.1 mm HAL Sn printed circuit boards O 0.6 mm min 1.44 mm O 0.60 0.05 mm C Drill Hole 0.70 0.02 mm D Cu Plating min. 25 m E Surface F Annular Ring HAL Sn, 5 - 15 m min. 0.1 mm Version from 17.08.2020, 20:27 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 4 Powered by TCPDF (www.tcpdf.org) Product Data Sheet hm2.0 Female connector, type B22, Part No. 244-22300-15 Modifications Available on request other contact surface also in THTR Accessories hm2.0 lower shield, type B22 Part Number 244-22600-1 Drawings Component data in 2D and 3D format you can download here: PDF 3D IGES 3D STEP 3D PDF Version from 17.08.2020, 20:27 - subject to change without notice ept GmbH | Bergwerkstr. 50 | 86971 Peiting | Tel. +49 (0) 8861 / 25 01 0 | Fax +49 (0) 8861 / 55 07 | sales@ept.de | www.ept.de Page 5