PRELIMINARY PASSIVE DELAY LINES, DIP PACKAGE RESISTORS w COILS wDELAY LINES P1410 SERIES - 14 PIN, 10 TAP P2420 SERIES - 24 PIN, 20 TAP RCD's P1410 and P2420 passive (analog) delay line FEATURES r Economical cost, prompt delivery! r Wide variety of values, 10nS to 1000nS. r Precision-grade internal inductor elements ensure excellent stability. r Fast rise times. r Operating temperature: 0C to 70C OPTIONS r Custom circuits available. r Non-standard delay or impedance values. r Tighter tolerance or temperature coefficient. r Internal resistor termination. r Faster rise times! r Military screening per MIL-D-83531. 3.0 4.5 6.0 7.0 8.5 10 12.5 17 20 25 30 34 37 42 50 62.5 85 100 125 170 1 2 3 4 5 6 7.5 10 12 15 18 20 22 25 30 37.5 50 60 75 100 100ppm/C Max. 1000M min. 100VDC Distortion 10% Max. TYPE P1410 CIRCUIT `A' .020" Min. . 300" Max. (Std.) .200" Max. (Opt. A) .018" .003" 5 5 5 5 7 7 7 7 8 8 8 8 8 8 10 10 12 15 16 16 10% or 1nS (whichever is greater) Dielectric Strength TYPE P1410, 14 PIN 10 TAPS 10 20 30 40 50 60 75 100 120 150 180 200 220 250 300 375 500 600 750 1000 5% or 2nS (whichever is greater) Tap Delay Tolerance Insulation Resistance 1.) Input test pulse shall have an amplitude of 3.2V, rise time of 2nS, and pulse width of 3x total delay. 2.) Delay line to be terminated to within 1% of its characterstic impedance. Delay Attenuation per TAP Max. (% ) (nS ec) Total Delay Tolerance Temperature Coefficient TEST CONDITIONS @25C Total Rise Time Delay Max. 1 (nS ec) (nS ec) series are a lumped constant design per applicable portions of MIL-D-23859. The series incorporates high performance inductors and multi-layer capacitors in a molded DIP package, ensuring stable transmission, low temperature coefficient, and excellent environmental performance. ELECTRICAL CHARACTERISTICS Available Im pedance Values (10% )* 50W, 100W 50W, 100W, 200W 50W, 100W, 200W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W, 500W 50W, 100W, 200W, 300W 50W, 100W, 200W, 300W 50W, 100W, 200W 50W, 100W .150" Min. .100" CIRCUIT `B' 7-8 9 10 11 12 3 4 5 6 8 9 10 11 12 13 (OUT) (GND) 1 7 (GND) CIRCUIT `C' 2 12 3 11 4 5 10 6 9 3 11 5 10 6 9 (IN) 14 (GND) 1 7 (OUT) 8 (GND) 13 2 12 (IN) 1 .785" Max. 6 7 (OUT) (GND) 14 .310" 1 5 (IN) 2 8 RCD 4 13 (OUT) 14 (GND) CIRCUIT `D' 14 3 (IN) 2 (GND) 1 8 (GND) CIRCUIT `E' 13 3 12 4 11 5 10 6 9 (IN) 2 7 (OUT) (GND) 14 8 (GND) CIRCUIT `F' 3 4 13 2 5 6 7 9 10 11 12 11 4 10 9 (IN) 2 (GND) 1 13 (OUT) 14 (GND) CIRCUIT `G' 12 3 5 (IN) 2 6 (OUT) (GND) 14 7 (GND) TYPE P2420 MAX .570" [14.48] 1.27" Max. [32.26] .300" Max. [7.62] 95 .015 [.38] Min. .120 [3.05] Min. .100 [2.54] .010 REF Ref. .020 [.508] 1.10" [27.94] .600" [15.24] [.254] 1 Rise Tim e Max.1 (nS ec) Delay per TA P (nS ec) Attenuation Max. (% ) 20 40 60 80 100 200 300 400 3 4 6 8 10 20 30 40 1 2 3 4 5 10 15 20 5 8 8 8 8 8 8 10 500 600 800 1000 50 60 80 100 25 30 40 50 10 10 10 10 Faster rise times available! * 100W is the most common impedance value. 95% 90% 85% 80% 75% 70% 65% 60% 55% 50% 45% 40% 35% 30% 25% 20% IN GND TYPE P2420, 24 PIN 20 TAPS Total Delay (nS ec) 15% TAP 10% Faster rise times available! * 100W is the most common impedance value. 5% 1 Available Im pedance Values (10% )* 50W, 100W 50W, 100W, 200W 50W, 100W, 200W 50W, 100W, 200W 50W, 100W, 200W 50W, 100W, 200W 100W, 200W 100W, 200W 100W, 100W, 100W, 100W, 200W 200W 200W 200W OUT GND P2420 STANDARD CIRCUITS TAP NUMBER CIRCUIT IN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 OUT GND A 2 3 4 5 6 7 8 9 10 11 12 14 15 16 17 18 19 20 21 22 23 1, 24 B 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 22 23 12 C 1 2 3 4 5 6 7 8 9 10 11 14 15 16 17 18 19 20 21 22 23 12, 24 D 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 P/N DESIGNATION: P1410 A - 100nS - 101 C RCD Type (P1410, P2420) Low Profile Option (P1410 only) Total Delay Impedance in 3-digit code: 50R=50W, 101=100W Circuit (A, B, C, D, E, F, G) RCD Components Inc., 520 E. Industrial Park Dr., Manchester, NH USA 03109 Tel: (603) 669-0054 Fax:(603) 669-5455 E-mail: rcdcompinc@aol.com www.rcd-comp.com FAxxx Specification subject to change without notice 1, 24