1
Data Sheet
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifi cations are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifi cations because there is no space for detailed specifi cations. Therefore, please approve our product
specifi cations or transact the approval sheet for product specifi cations before ordering.
http://www.murata.com/
1
Noise Suppression Products/EMI Suppression Filters > EMIFILr (Capacitor type) > Single Circuit Type for Large Current
2012.7.5
oThis data sheet is applied for CHIP EMIFILr used for General Electronics equipment for your design.
EMIFILr (Capacitor type) Single Circuit Type for Large Current
NFM31P Series (1206 Size)
c Dimensions
3.2±0.2
1.6±0.2
1.3±0.2
(1)
(2)
(2)
(3)
0.3±0.2
1.1±0.3 0.4±0.3 1.6±0.2
0.4±0.3
(in mm)
: Electrode
c Insertion Loss Characteristics (Main Items)
Frequency (MHz)
0.1 1 10 100 1000 6000
100
60
80
40
20
0 (50Ω - 50Ω)
Insertion Loss (dB)
NFM31PC276B0J3
c Equivalent Circuit
Input (Output)
(1)
Output (Input)
(3)
(2)
GND
No polarity.
c Packaging
Code Packaging Minimum Quantity
L180mm Embossed Tape 3000
BBulk(Bag) 500
c Rated Value (p: packaging code)
Part Number Capacitance Rated Current Rated Voltage Insulation Resistance (min.) Operating
Temperature Range
NFM31PC276B0J3p27µF ±20% 6A 6.3Vdc 20M ohm -40 to +85°C
Number of Circuit: 1
c !Caution/Notice
!Caution (Rating)
Do not use products beyond the rated current and
rated voltage as this may create excessive heat
and deteriorate the insulation resistance.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profi le
where peak solder temperature is below the Tin melting
point is used. Please confi rm the solderability of Tin
plating termination chip before use.
