Semiconductor Components Industries, LLC, 2001
May, 2001 – Rev. 2 1Publication Order Number:
MBR1545CTP/D
MBR1545CTP
SWITCHMODE
Power Rectifier
. . . using the Schottky Barrier principle with a platinum barrier
metal. These state–of–the–art devices have the following features:
•Center–Tap Configuration
•Guardring for Stress Protection
•Low Forward Voltage
•150°C Operating Junction Temperature
•Epoxy Meets UL94, VO at 1/8″
Mechanical Characteristics:
•Case: Epoxy, Molded
•Weight: 1.9 grams (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
•Shipped 50 units per plastic tube
•Marking: B1545P
MAXIMUM RATINGS
Rating Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
45 V
Average Rectified Forward Current
(Rated VR, TC = 105°C) Per Diode
Per Device
IF(AV) 7.5
15
A
Peak Repetitive Forward Current
(Rated VR, Square W ave,
20 kHz, TC = 105°C) Per Diode
IFRM 15 A
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
IFSM 150 A
Peak Repetitive Reverse Surge
Current (2.0 s, 1.0 kHz) IRRM 1.0 A
Storage Temperature Range Tstg –65 to +175 °C
Operating Junction Temperature TJ–65 to +150 °C
Voltage Rate of Change (Rated VR) dv/dt 10,000 V/s
Device Package Shipping
ORDERING INFORMATION
MBR1545CTP TO–220
http://onsemi.com
CASE 221A
TO–220AB
PLASTIC
50 Units/Rail
3
4
1
SCHOTTKY BARRIER
RECTIFIER
15 AMPERES
45 VOLTS
1
3
2, 4
2
MARKING DIAGRAM
YY WW
B1545P
AKA
YY = Year
WW = Work Week
B1545P= Device Code
AKA = Diode Polarity
MBR1545CTP
http://onsemi.com
2
THERMAL CHARACTERISTICS (Per Diode)
Characteristic Symbol Value Unit
Maximum Thermal Resistance, Junction to Case RθJC 3.0 °C/W
Maximum Thermal Resistance, Junction to Ambient RθJA 60 °C/W
ELECTRICAL CHARACTERISTICS (Per Diode)
Maximum Instantaneous Forward Voltage (Note 1.)
(iF = 7.5 Amps, TC = 125°C)
(iF = 15 Amps, TC = 125°C)
(iF = 15 Amps, TC = 25°C)
VF0.57
0.72
0.84
Volts
Maximum Instantaneous Reverse Current (Note 1.)
(Rated dc Voltage, TC = 125°C)
(Rated dc Voltage, TC = 25°C)
iR15
0.1
mA
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤2.0%
Figure 1. Maximum Forward Voltage
VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
100
10
1
0.50.40.30.2
Figure 2. Typical Forward Voltage
0.1
iF, INSTANTANEOUS FORWARD CURRENT (A)
0.80.70.6 1.110.9 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
10
1
0.50.40.30.1
0.1
iF, INSTANTANEOUS FORWARD CURRENT (A)
0.80.70.6 0.9
100
0.2
Figure 3. Typical Reverse Current
VR, REVERSE VOLTAGE (VOLTS)
0.01
0.001
0.0001
151050
Figure 4. Typical Capacitance
0.0000001 302520 454035 VR, REVERSE VOLTAGE (VOLTS)
200
100
2015100
0353025 50
800
5
50
IR, REVERSE CURRENT (A)
0.00001
0.000001
4540
400
300
500
700
600
C, CAPACITANCE (pF)
125°C25°C
75°C125°C
25°C
75°C
125°C
25°C
75°C
MBR1545CTP
http://onsemi.com
3
Figure 5. Current Derating, Case, Per Diode
TC, CASE TEMPERATURE (°C)
14
12
135130
Figure 6. Forward Power Dissipation, Per Diode
145140 150 IF(AV), AVERAGE FORWARD CURRENT (AMPS)
2
1
40
08614
8
2155 10
4
3
5
7
6
10
8
6
4
2
0
IF(AV), AVERAGE FORWARD CURRENT (A)
RATED
VOLTAGE
APPLIED
dc
SQUARE WAVE
12
PF(AV), AVERAGE FORWARD
POWER DISSIPATION (W)
dc
SQUARE WAVE
MBR1545CTP
http://onsemi.com
4
PACKAGE DIMENSIONS
TO–220 THREE–LEAD
TO–220AB
CASE 221A–09
ISSUE AA
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
DIM MIN MAX MIN MAX
MILLIMETERSINCHES
A0.570 0.620 14.48 15.75
B0.380 0.405 9.66 10.28
C0.160 0.190 4.07 4.82
D0.025 0.035 0.64 0.88
F0.142 0.147 3.61 3.73
G0.095 0.105 2.42 2.66
H0.110 0.155 2.80 3.93
J0.018 0.025 0.46 0.64
K0.500 0.562 12.70 14.27
L0.045 0.060 1.15 1.52
N0.190 0.210 4.83 5.33
Q0.100 0.120 2.54 3.04
R0.080 0.110 2.04 2.79
S0.045 0.055 1.15 1.39
T0.235 0.255 5.97 6.47
U0.000 0.050 0.00 1.27
V0.045 --- 1.15 ---
Z--- 0.080 --- 2.04
B
Q
H
Z
L
V
G
N
A
K
F
123
4
D
SEATING
PLANE
–T–
C
S
T
U
R
J
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 1–303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MBR1545CTP/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
