BC817-40W 45 V, 0.5 A, General Purpose NPN Transistor ON Semiconductor's BC817-40W is a General Purpose NPN Transistor that is housed in the SC-70/SOT-323 package. Features www.onsemi.com * NSV Prefix for Automotive and Other Applications Requiring * Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable This Device is Pb-Free, Halogen Free/BFR Free and is RoHS Compliant COLLECTOR 3 1 BASE MAXIMUM RATINGS (TA = 25C) Rating Symbol Value Unit Collector - Emitter Voltage VCEO 45 V Collector - Base Voltage VCBO 50 V Emitter - Base Voltage VEBO 5.0 V IC 500 mAdc Symbol Max Unit PD 460 mW RqJA 272 C/W TJ, Tstg -55 to +150 C Collector Current - Continuous 2 EMITTER THERMAL CHARACTERISTICS Characteristic Total Device Dissipation (Note 1) Thermal Resistance, Junction-to-Ambient (Note 1) Junction and Storage Temperature Range SC-70 CASE 419 STYLE 3 MARKING DIAGRAM Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR-4 Board, 1 oz. Cu, 100 mm2 CE MG G 1 CE M G = Specific Device Code = Date Code = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping BC817-40WT1G SC-70 (Pb-Free) 3000 / Tape & Reel NSVBC817-40WT1G SC-70 (Pb-Free) 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2016 May, 2016 - Rev. 2 1 Publication Order Number: BC817-40W/D BC817-40W ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Symbol Min Typ Max Unit Collector -Emitter Breakdown Voltage (IC = 10 mA) V(VR)CEO 45 - - V Collector -Emitter Breakdown Voltage (VEB = 0 V, IC = 10 mA) V(VR)CES 50 - - V Emitter -Base Breakdown Voltage (IE = 1.0 mA) V(VR)EBO 5.0 - - V Collector Cutoff Current (VCB = 20 V) (VCB = 20 V, TA = 150C) ICBO - - - - 100 5.0 nA mA 250 40 - - 600 - Characteristic OFF CHARACTERISTICS ON CHARACTERISTICS DC Current Gain (Note 2) (IC = 100 mA, VCE = 1.0 V) (IC = 500 mA, VCE = 1.0 V) hFE - Collector -Emitter Saturation Voltage (Note 2) (IC = 500 mA, IB = 50 mA) VCE(sat) - - 0.7 V Base -Emitter On Voltage (Note 2) (IC = 500 mA, VCE = 1.0 V) VBE(on) - - 1.2 V fT 100 - - MHz Cobo - 10 - pF SMALL- SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mA, VCE = 5.0 V, f = 100 MHz) Output Capacitance (VCB = 10 V, f = 1.0 MHz) Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 2. Pulse Condition: Pulse Width = 300 msec, Duty Cycle 2% www.onsemi.com 2 BC817-40W TYPICAL CHARACTERISTICS 1 700 150C VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN 600 VCE = 1 V 500 25C 400 300 -55C 200 100 150C 25C 0.1 -55C 0.01 0.001 0 0.001 0.01 0.001 1 0.1 0.1 1 IC, COLLECTOR CURRENT (A) Figure 1. DC Current Gain vs. Collector Current Figure 2. Collector Emitter Saturation Voltage vs. Collector Current VBE(on), BASE-EMITTER VOLTAGE (V) 1.0 0.01 IC, COLLECTOR CURRENT (A) 1.1 -55C IC/IB = 10 0.9 0.8 25C 0.7 0.6 150C 0.5 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 1 1.2 VCE = 5 V 1.1 1.0 0.9 -55C 0.8 25C 0.7 0.6 0.5 150C 0.4 0.3 0.2 0.0001 0.001 0.01 0.1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 3. Base Emitter Saturation Voltage vs. Collector Current Figure 4. Base Emitter Voltage vs. Collector Current 1000 fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) IC/IB = 10 VCE = 1 V TA = 25C 100 10 0.1 1 10 100 1000 IC, COLLECTOR CURRENT (mA) Figure 5. Current Gain Bandwidth Product vs. Collector Current www.onsemi.com 3 1 BC817-40W V, TEMPERATURE COEFFICIENTS (mV/C) 1.0 TJ = 25C 0.8 0.6 0.4 IC = 10 mA 100 mA 300 mA 500 mA 0.2 0.1 1 IB, BASE CURRENT (mA) 10 qVC for VCE(sat) 0 -1 qVB for VBE -2 100 1 10 100 IC, COLLECTOR CURRENT (mA) Figure 6. Saturation Region Figure 7. Temperature Coefficients 100 C, CAPACITANCE (pF) 0 0.01 +1 Cib 10 Cob 1 0.1 10 1 VR, REVERSE VOLTAGE (VOLTS) 100 Figure 8. Capacitances 1 1 ms 10 ms 100 ms 1s Thermal Limit 0.1 IC (A) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) TYPICAL CHARACTERISTICS 0.01 Single Pulse Test @ TA = 25C 0.001 0.01 0.1 1 VCE (Vdc) 10 Figure 9. Safe Operating Area www.onsemi.com 4 100 1000 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS SC-70 (SOT-323) CASE 419-04 ISSUE N DATE 11 NOV 2008 SCALE 4:1 D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. e1 DIM A A1 A2 b c D E e e1 L HE 3 E HE 1 2 b e A 0.05 (0.002) MIN 0.80 0.00 0.30 0.10 1.80 1.15 1.20 0.20 2.00 MILLIMETERS NOM MAX 0.90 1.00 0.05 0.10 0.70 REF 0.35 0.40 0.18 0.25 2.10 2.20 1.24 1.35 1.30 1.40 0.65 BSC 0.38 0.56 2.10 2.40 0.016 0.010 0.087 0.053 0.055 0.022 0.095 XX MG G SOLDERING FOOTPRINT* 0.65 0.025 1 XX M G 1.9 0.075 = Specific Device Code = Date Code = Pb-Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb-Free indicator, "G" or microdot " G", may or may not be present. 0.9 0.035 SCALE 10:1 0.008 0.079 MAX 0.040 0.004 GENERIC MARKING DIAGRAM L 0.7 0.028 0.012 0.004 0.071 0.045 0.047 INCHES NOM 0.035 0.002 0.028 REF 0.014 0.007 0.083 0.049 0.051 0.026 BSC 0.015 0.083 c A2 A1 0.65 0.025 MIN 0.032 0.000 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. STYLE 1: CANCELLED STYLE 6: PIN 1. EMITTER 2. BASE 3. COLLECTOR DOCUMENT NUMBER: DESCRIPTION: STYLE 2: PIN 1. ANODE 2. N.C. 3. CATHODE STYLE 3: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE STYLE 5: PIN 1. ANODE 2. ANODE 3. CATHODE STYLE 7: PIN 1. BASE 2. EMITTER 3. COLLECTOR STYLE 8: PIN 1. GATE 2. SOURCE 3. DRAIN STYLE 9: PIN 1. ANODE 2. CATHODE 3. CATHODE-ANODE STYLE 10: PIN 1. CATHODE 2. ANODE 3. ANODE-CATHODE 98ASB42819B SC-70 (SOT-323) STYLE 11: PIN 1. CATHODE 2. CATHODE 3. CATHODE Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped "CONTROLLED COPY" in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. (c) Semiconductor Components Industries, LLC, 2019 www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800-282-9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 www.onsemi.com 1 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative