APE Washable RoHS Compliant Subminiature Pushbutton Switches UL Features Specifications 1. Twin-contact clip mechanism for high reliability. 0.4VA ACDC 2. Process sealed structure Rating Max:50mA 60VAC/DC Min:1A 20mVAC/DC 3. Gold-plated contacts. Initial contact resistance 50m max. UL:48VAC/DC 50mA Dielectric strength 4. Terminal pin pitch: 2.54 mm. 1.5mA 200VAC 250VAC 1 minute 500VDC Initial Insulation resistance 500M min. 5. UL recognized Electrical life 10,000 operations at maximum rating. 30,000 operations at 0.4VA Operating force 0.782.94N Operating temperature range Storage temperature range -2085 -4085 Part Numbering A Series code PE Actuator shape 2 F Number of poles Code Type Fig. Number of poles PE Push type 1 1 pole 2 2 poles 2 Switching function Terminal style Code Switching function F ON ON Optional Accessories.............................. Page 253. ON Momentary. M 10 Z Actuator shape Clip contact mechanism Fig. Terminal style Code Actuator shape 2 PC Straight M Standard 5 Right angle 0.2 inch pitch 6 Right angle 0.3 inch pitch APE-MStandard type SPDT Switching function Part No. PC Straight APE1F-2M-10-Z ON ON Connecting terminals 2-3 2-1 ON 2-3 5-6 ON 2-1 5-4 APE1F-5M-10-Z ON ON Connecting terminals 2-3 2-1 ON 2-3 5-6 ON 2-1 5-4 APE1F-6M-10-Z ON ON Connecting terminals 2-3 2-1 ON 2-3 5-6 ON 2-1 5-4 Terminal numbers are not shown on the switch. DPDT Switching function Part No. APE2F-2M-10-Z Connecting terminals PC Straight Terminal numbers are not shown on the switch. SPDT Switching function Part No. 0.2R/A Terminal numbers are not shown on the switch. DPDT Switching function Part No. APE2F-5M-10-Z Connecting terminals 0.2R/A Terminal numbers are not shown on the switch. SPDT Switching function Part No. 0.3R/A Terminal numbers are not shown on the switch. DPDT Switching function Part No. APE2F-6M-10-Z Connecting terminals 0.3R/A Terminal numbers are not shown on the switch. ON Momentary. Semi-standard products. Made to order products. APE Right angle terminals 1 pole The space between the terminal rows are available in two dimensions: 0.2 inches (5.08 mm) and 0.3 inches (7.62 mm). [Example] 0.2-inch pitch : APE1F-5M-10-Z 0.3-inch pitch : APE1F-6M-10-Z 2 poles Button Shape Bracket Installation Procedure StandardM Mounting of Switch Use PC boards with hole diameter of 1mm. Do not bend the terminal pins before mounting the switch on the PC board. After mounting the switch, do not place the device in such a way that the device weight will be applied on to the actuator of the switch. Do not apply load exceeding 12.7 N to the actuator. If load exceeding 12.7 N is expected to be applied to the actuator, please use a Bracket (optional accessory sold separately). Maximum load will be 29.4 N when a Bracket is used. Use Bracket 140000640314 or 140000640318 for side-byside mounting. To i n c r e a s e m o u n t i n g s t r e n g t h , u s e B r a c k e t 140000640315. PC Hole Layouts will change depending on the Bracket. Please refer to P.245. Optional Accessories. Color Cap Mounting Refer to P.249. APE Soldering Specifications Manual Soldering DeviceSoldering iron 380 C, Max.; 3 seconds, Max. Auto Soldering DeviceJet wave type or dip type 275 C, Max.; 6 seconds, Max. Pre-heating should be done at temperatures ranging from 80 C to 120 C and within 120 seconds. Flux Cleaning Solvent :Fluorine or Alcohol type. Cleaning after soldering should be done after the terminal temperature falls to 90 or below, or after leaving the switch for five minutes or longer at room temperature. Do not use ultrasonic cleaning. PC Hole LayoutsAPAPE PC Straight 2 poles APE 2 poles Terminal Type 1 pole AP-M AP-S APE 0.2-inch pitch 0.3-inch pitch FU 231 2 poles 140000640318 Packaging Specification Right-angle Terminal 15 AP-M AP-S AP-H 140000640315 or 140000640317 KU 1 pole 140000640314 or 140000640316 JI SO SO AP-M AP-S AP-H APE When optional Bracket is used. JI Type Without Bracket FU Mounting KU 196