We also design and build subassemblies --
practically any component that involves a core
and a winding. On the power side up to 12-gage
wire and 1 kVa; on the signal side down to 46-
gage wire and serving application frequencies
beyond 1 GHz.
What we do best.
Few manufacturers can compete successfully in
both low-quantity custom and high-quantity
areas. Manufacturers typically do one or the
other well. Pulse Specialty Components does
both well thanks our domestic and offshore
design and manufacturing resources.
It all starts here, with extensive design engineer-
ing capability and well established domestic man-
ufacturing accustomed to building to commercial,
MIL, avionics, and space application require-
ments. Domestically, we’re well-equipped to fill
low- to mid-volume standard-part and custom
orders and to perform quick modifications of
standard parts. For higher-volume requirements,
our design engineers shake hands with our man-
ufacturing engineers in any of three offshore ISO
9000 manufacturing facilities owned and operat-
ed by Pulse.
The result is a rare combination: accessible and
talented customer service people and design
engineers supported by
a choice of
manufactur-
ing facilities worldwide.
Domestic or offshore, our prototyping, pricing,
scheduling, and delivery come together as if we
were all in the same facility.
nAccessible, experienced design services.
nRapid modification of standard models.
nQuick design/build of fully custom magnetics.
nLow- and high-volume manufacturing.
nExcellent pricing over a broad range of
supply requirements.
Wound toroids, 0.5 to 3 in. OD
#8 awg -- #46 awg
Assorted custom magnetic
components and configurations.
Current transformer modules.
MIL/high rel and commercial.
One- and three-phase.
Custom mounting.
Vertical-mount toroids.
Thru-hole and surface-mount.
TABLE OF CONTENTS
nCustom capabilities .............................................. 2, 3
nInternational PC plug-in
power transformers (14A)..................................... 4
nInternational high power transformers (41A)........ 5
nSplit bobbin horizontal profile
plug-in transformers (ST)..................................... 6
nLow profile plug-in transformers (LP).................... 7
nHigh power low profile
humbucking transformers (LP)............................. 8
nTriple output low profile
humbucking transformers (MPL).......................... 9
nConcentric and split bobbin
vertical profile plug-in transformers (PC)............. 10
nTriple output vertical profile
plug-in transformers (MPC) ................................. 11
nChassis-Tran power transformers (241)................ 12
nTriple output Chassis-Tran
power transformers (MT/DMT) ............................ 13
nBus couplers, pulse transformers
delay lines, high-frequency baluns........................ 14
nFiber-to-copper signal converter, CMI and
Fiber Channel line interface modules,
Fiber Channel dual transformers.......................... 15