Document Number: 93552 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 14-May-08 1
Standard Recovery Diodes
(Hockey PUK Version), 700 A
SD700C..L Series
Vishay High Power Products
FEATURES
Wide current range
High voltage ratings up to 4500 V
High surge current capabilities
Diffused junction
Hockey PUK version
Case style DO-200AB (B-PUK)
Lead (Pb)-free
TYPICAL APPLICATIONS
Converters
Power supplies
High power drives
Auxiliary system supplies for traction applications
ELECTRICAL SPECIFICATIONS
PRODUCT SUMMARY
IF(AV) 700 A
DO-200AB (B-PUK)
RoHS
COMPLIANT
MAJOR RATINGS AND CHARACTERISTICS
PARAMETER TEST CONDITIONS VALUES UNITS
IF(AV)
700 A
Ths 55 °C
IF(RMS)
1310 A
Ths 25 °C
IFSM
50 Hz 7500 A
60 Hz 7850
I2t50 Hz 281 kA2s
60 Hz 257
VRRM Range 3000 to 4500 V
TJ- 40 to 150 °C
VOLTAGE RATINGS
TYPE NUMBER VOLTAGE
CODE
VRRM, MAXIMUM REPETITIVE
PEAK REVERSE VOLTAGE
V
VRSM, MAXIMUM NON-REPETITIVE
PEAK REVERSE VOLTAGE
V
IRRM MAXIMUM
AT TJ = TJ MAXIMUM
mA
SD700C..L
30 3000 3100
50
36 3600 3700
40 4000 4100
45 4600 4600
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93552
2Revision: 14-May-08
SD700C..L Series
Vishay High Power Products Standard Recovery Diodes
(Hockey PUK Version), 700 A
Note
The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum average forward current
at heatsink temperature IF(AV)
180° conduction, half sine wave
Double side (single side) cooled
700 (345) A
55 (85) °C
Maximum RMS forward current IF(RMS) 25 °C heatsink temperature double side cooled 1310
A
Maximum peak, one-cycle forward,
non-repetitive surge current IFSM
t = 10 ms No voltage
reapplied
Sinusoidal half wave,
initial TJ = TJ maximum
7500
t = 8.3 ms 7850
t = 10 ms 100 % VRRM
reapplied
6310
t = 8.3 ms 6600
Maximum I2t for fusing I2t
t = 10 ms No voltage
reapplied
281
kA2s
t = 8.3 ms 257
t = 10 ms 100 % VRRM
reapplied
199
t = 8.3 ms 182
Maximum I2t for fusing I2t t = 0.1 to 10 ms, no voltage reapplied 2810 kA2s
Low level value of threshold voltage VF(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.88 V
High level value of threshold voltage VF(TO)2 (I > π x IF(AV)), TJ = TJ maximum 0.99
Low level value of forward
slope resistance rf1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.78
mΩ
High level value of forward
slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.73
Maximum forward voltage drop VFM Ipk = 1000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.66 V
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS VALUES UNITS
Maximum junction operating
temperature range TJ- 40 to 150 °C
Maximum storage temperature range TStg - 55 to 200
Maximum thermal resistance,
junction to heatsink RthJ-hs
DC operation single side cooled 0.011 K/W
DC operation double side cooled 0.05
Mounting force, ± 10 % 9800
(1000)
N
(kg)
Approximate weight 250 g
Case style See dimensions - link at the end of datasheet DO-200AB (B-PUK)
ΔRthJ-hs CONDUCTION
CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION TEST CONDITIONS UNITS
SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE
180° 0.011 0.011 0.008 0.008
TJ = TJ maximum K/W
120° 0.014 0.015 0.014 0.014
90° 0.018 0.018 0.019 0.019
60° 0.026 0.026 0.027 0.028
30° 0.045 0.046 0.046 0.046
Document Number: 93552 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 14-May-08 3
SD700C..L Series
Standard Recovery Diodes
(Hockey PUK Version), 700 A Vishay High Power Products
Fig. 1 - Current Ratings Characteristics
Fig. 2 - Current Ratings Characteristics
Fig. 3 - Current Ratings Characteristics
Fig. 4 - Current Ratings Characteristics
Fig. 5 - Forward Power Loss Characteristics
Fig. 6 - Forward Power Loss Characteristics
30
40
50
60
70
80
90
100
110
120
130
140
150
0 100 200 300 400 500
30° 60° 90° 12 18
Average Forward Current (A)
Maximum Allowable Heatsink TemperatureC)
SD700C..L Series
(Single Side Cooled)
R (D C ) = 0.11 K/W
th J-hs
Conduction Angle
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0200400600800
30° 60°
90°
180°
DC
120°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature C)
SD700C..L Series
(Single Side Cooled)
R (DC) = 0.11 K/W
th J-hs
Conduction Period
0
20
40
60
80
100
120
140
160
180
0 500 1000 1500 2000 2500
30° 60° 90° 120° 180°
Average Forward Current (A)
Maximum Allowable Heatsink Temperature ( °C)
Conduction Angle
SD2000C..L Series
(Double Side Cooled)
R (D C ) = 0.031 K/W
th J- hs
20
30
40
50
60
70
80
90
100
110
120
130
140
150
0 200 400 600 800 1000 1200 1400
30°
60°
90°
180°
DC
12
Average Forward Current (A)
Maximum Allowable Heatsink Temperature (°C)
SD700C..L Series
(Double Side Cooled)
R (DC) = 0.05 K/W
thJ- hs
Conduction Period
0
500
1000
1500
2000
2500
0 200 400 600 800 1000
180°
120°
90°
60°
30°
Average Forward Current (A)
Maximum Average Forward Power Loss (W)
RMS Limit
SD700C..L Series
T = 150° C
J
Conduction Angle
0
500
1000
1500
2000
2500
0 200 400 600 800 1000 1200 1400
DC
18
12
90°
60°
30°
Average Forward Current (A)
RMS Limit
Maximum Average Forw ard Power Loss (W)
SD 700 C..L S er ies
T = 150°C
J
Conduction Period
www.vishay.com For technical questions, contact: ind-modules@vishay.com Document Number: 93552
4Revision: 14-May-08
SD700C..L Series
Vishay High Power Products Standard Recovery Diodes
(Hockey PUK Version), 700 A
Fig. 7 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 8 - Maximum Non-Repetitive Surge Current
Single and Double Side Cooled
Fig. 9 - Forward Voltage Drop Characteristics
Fig. 10 - Thermal Impedance ZthJ-hs Characteristics
2000
3000
4000
5000
6000
7000
001011
N um be r O f Eq ua l A m p lit ud e H a lf C y cl e C urr e nt P uls e s (N )
Peak Half Sine Wave Forward Current (A)
SD700C..L Series
Initial T = 150 °C
@ 60 Hz 0.0083 s
@ 50 Hz 0.0100 s
J
At Any Rated Load Condition And With
50% Rated V Applied Following Surge
RRM
1000
2000
3000
4000
5000
6000
7000
8000
9000
0.01 0.1 1
Pulse Train Duration (s)
Peak Half Sine W ave Forward Current (A)
Maximum Non Repetitive Surge Current
SD700C..L Series
50% Rated V Reapplied
No Voltage Reapplied
In itial T = 15 0 °C
RRM
J
Versus Pulse Train Duration.
100
1000
10000
0.511.522.533.54
T = 2 5°C
J
Instantaneous Forward Voltage (V)
In stant aneous Forward Current (A)
SD 700C..L Series
T = 150°C
J
0.001
0.01
0.1
1
0111.010.0100.0
Square W ave Pulse Duration (s)
SD700C..L Series
thJ-hs
Transient Thermal Im pedance Z (K/W )
Steady State Value
R = 0.11 K/W
(Single Side C ooled)
R = 0.05 K/W
(Double Side Cooled)
(D C O peration )
thJ-hs
thJ-hs
Document Number: 93552 For technical questions, contact: ind-modules@vishay.com www.vishay.com
Revision: 14-May-08 5
SD700C..L Series
Standard Recovery Diodes
(Hockey PUK Version), 700 A Vishay High Power Products
ORDERING INFORMATION TABLE
1- Diode
2- Essential part number
3- 0 = Standard recovery
4- C = Ceramic PUK
5- Voltage code x 100 = V
RRM
(see Voltage Ratings table)
6-
L = PUK case DO-200AB (B-PUK)
Device code
51324
6
SD 70 0 C 45 L
LINKS TO RELATED DOCUMENTS
Dimensions http://www.vishay.com/doc?95246
Document Number: 95246 For technical questions, contact: indmodules@vishay.com www.vishay.com
Revision: 05-Nov-07 1
DO-200AB (B-PUK)
Outline Dimensions
Vishay Semiconductors
DIMENSIONS in millimeters (inches)
58.5 (2.30) DIA. MAX.
53 (2.09) DIA. MAX.
Quote between upper and lower pole pieces has to be considered after
application of mounting force (see Thermal and Mechanical Specifications)
3.5 (0.14) DIA. NOM. x
1.8 (0.07) deep MIN. both ends
0.8 (0.03)
both ends
34 (1.34) DIA. MAX.
2 places
26.9 (1.06)
25.4 (1)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.