WA optical switch ORIGINAL POLARIZED ACTUATOR CONSTRUCTION FEATURES * Small size, Low height 31 mm (L) x 16 mm (W) x 9 mm (H) 1.220 inch (L) x .630 inch (W) x .354 inch (H) * Low Insertion Loss Achieved 1dB max. insertion loss (Typ. 0.5dB) * Latching Operation Latching operation is realized by "Original polarized actuator construction" APPLICATIONS * OADM * Protection switching (WDM. CATV, FTTH) * Network monitoring * Optical measuring instrument ORDERING INFORMATION AWAP Switch type Wavelength Operation type Connector type Nominal coil voltage 0: 12 1: 22 0: 1,31020nm 1: 1,55020nm 2: 1,310/1,550nm20nm 1: 1 coil latching 2: 2 coil latching 2: SC/AdPC 3: MU/AdPC 1: 3V DC 6: 4.5V DC 9: 5V DC FORM 12 type 22 type SPECIFICATIONS COIL DATA (at 20C 68F) Insertion loss*1 Max. 1.0dB Isolation*2 Min. 60dB Nominal operating voltage 3 4.5 5 Return loss*2 Min. 50dB Nominal operating current 50 33.3 30 P.D.L.*2 Max. 0.1dB Coil resistance () 60 135 166.7 Optical input power Mechanical eudurance Max. 100mW (20dBm) Min. 10M opes. Vibration resistance Functional 10 to 55Hz double amplitude 0.75mm Destructive 10 to 55Hz double amplitude 1.52mm Shock resistance Functional Min. 200m/s2 Destructive Switching time Fiber type Min. 500m/s 2 Max. 10ms SMF (9.5/125/900) Operation temperature -40C to +70C -40F to +158F Storage temperature -40C to +70C -40F to +158F Weight Approx. 11g Notes: *1. Connectors are excluded. Add up to 0.2dB typ. for each connector. Add 0.3dB typical over temperature range. *2. Connectors are excluded. 4 <1 coil latching> Nominal operating power (mW) 150 <2 coil latching> Nominal operating voltage 3 Nominal operating current 66.7 44.4 40 45 101.3 125 Coil resistance () Nominal operating power (mW) 4.5 5 200 * For operation, more than 20ms pulse with nominal voltage +20%/-5% V is recommended. mm inch DIMENSIONS Optical signal I/O and coil impress direction indication diagram 12 1m +0.1m 0 3.281ft +.328ft 0 6.100.3 .240.012 12, 1 coil latching Input Output Port 2 (Reset) Port 3 (Set) Port 1 16.000.3 .630.012 -1 31.000.3 1.220.012 50.000.3 1.969.012 + 9.000.3 .354.012 2 3 4 Reset condition (Bottom view) 12, 2 coil latching 1 Input Output Port 2 (Reset) Port 3 (Set) Port 1 0.300.1 .012.004 3.000.3 .118.012 26.000.3 1.024.012 3.250.3 .128.012 0.600.1 .024.004 5.200.3 .205.012 22 +1 3+ -2 4- Reset condition (Bottom view) 22, 1 coil latching 1m +0.1m 0 3.281ft +.328ft 0 6.100.3 .240.012 Input Output Port 1 Port 4 Port 2 Port 3 16.000.3 .630.012 - + 31.000.3 1.220.012 50.000.3 1.969.012 0.300.1 .012.004 3 2 4 Reset Port1Port2 Port4Port3 Set Port1Port3 Port4Port2 Reset condition (Bottom view) 9.000.3 .354.012 22, 2 coil latching 3.000.3 .118.012 26.000.3 1.024.012 3.250.3 .128.012 PC board pattern (Tolerance: 0.1 .004) 26.00 1.024 1 0.600.1 .024.004 5.200.3 .205.012 Input Output Port 1 Port 4 Port 2 Port 3 + - 1 3 2 4 + - Reset Port1Port2 Port4Port3 Set Port1Port3 Port4Port2 Reset condition (Bottom view) 5.20 .205 1.05 dia. .041 dia. 5 PERFORMANCE TEST DATA A: Basic characteristic Test item Test target value and condition Referential standard Number of samples Result 1. Set voltage Less than nominal voltage JIS C 5442 4.6 Method A 20 Good 2. Reset voltage Less than nominal voltage JIS C 5442 4.6 Method A 20 Good 3. Set time Less than 10ms (without diode) JIS C5931 5.5 20 Good 4. Reset time Less than 10ms (without diode) JIS C5931 5.5 20 Good 5. Insertion loss Less than 1.0 dB IEC 61300-2-4 JIS C5901 6.2 20 Good 6. Isolation More than 60 dB IEC 61300-3-9 JIS C5901 6.7 20 Good 7. Return loss More than 50 dB IEC 61300-3-6 JIS C5901 6.5 20 Good 8. P.D.L. Less than 0.1 dB IEC 61300-3-2 JIS C5901 6.3 20 Good Number of samples Result B: Life tests Test item Test target value and condition Referential standard 1. Optical input power 100mW, 2 min. Telcordia GR-1073 6 Good 2. Mechanical life 1 x 107, 180/min. JIS C 5442 7.1.2 6 Good Number of samples Result C: Environmental tests (Mechanical stress) Test item Test target value and condition Referential standard 1. Vibration resistance 10 to 55Hz (1.52mm .060inch10%) in 4 minutes. 2 hours in each of three directions. Telcordia GR-1073 3 Good 2. Shock resistance 200m/s2, sine half-wave pulse 11ms 5 times in each six directions. IEC 61300-2-9 JIS C 5901 7.2 3 Good 3. Cable retention Tensile strength: 450g 15.873oz, 0.4mm/sec. 1 min. Telcordia GR-1073 3 Good 4. Side pull Tensile strength: 230g 8.113oz, at an angle of 90 5 sec. Telcordia GR-1073 3 Good Number of samples Result JIS C 5442 5.5 3 Good 2. High temperature storage 852C 18535.6F, 2000 hours Telcordia GR-1221 11 Good 3. Low temperature storage -40C -40F, 2000 hours Telcordia GR-1221 11 Good 4. Temprature cycling -40C -40F 85C 185F, 500 cycles Telcordia GR-1221 11 Good 5. Damp heat 85C 185F 85%RH, 1000 hours Telcordia GR-1221 11 Good 6 Good 3 Good D: Environmental tests (Temperature & Humidity stress) Test item 1. Solder heat test 6. Humidity cycle 7. Compound stress 6 Test target value and condition Solder Temp.: 250C 482F Solder Time: 3 sec. Referential standard MIL-STD-202E 25C 77F 95%RH65C 149F 95%RH-10C 14F25C 77F Method 106 100cycles JIS C 5442 6.5 Random Vibration; 10 to 500 Hz, 98m/s2 (Ave), 294m/s2 (Peak) Thermal Shock; JIS C 5442 6.3 -55C -67F (30min) 85C 185F (30min) De-energied, 10cyc. A-1, 2 Set voltage and reset voltage 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=20 2. Test conditions: (1) Ambient temperature and humidity: 25C 77F, 50 % RH a) Set voltage b) Reset voltage 10 10 8 8 6 6 4 4 Min. : 2.710 Max. : 3.250 Ave. : 2.966 n-1 : 0.132 2 0 2.5 2.6 2.7 2.8 2.9 3.0 3.1 Set Voltage (V) 3.2 3.3 Min. : 2.260 Max. : 3.340 Ave. : 2.913 n-1 : 0.281 2 0 2.0 3.4 2.2 2.4 2.6 2.8 3.0 3.2 Reset Voltage (V) 3.4 3.6 3.8 A-3, 4 Set time and reset time 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=20 2. Test conditions: (1) Ambient temperature and humidity: 25C 77F, 50 % RH a) Set time b) Reset time 10 10 8 8 6 6 4 4 Min. : 5.120 Max. : 7.220 Ave. : 6.143 n-1 : 0.490 2 0 4.0 4.5 5.0 5.5 6.0 6.5 7.0 Set Time (ms) 7.5 8.0 Min. : 4.040 Max. : 6.840 Ave. : 5.609 n-1 : 0.674 2 0 3.5 8.5 4.0 4.5 5.0 5.5 6.0 6.5 Reset Time (ms) 7.0 7.5 8.0 A-5, 6 Insertion loss and isolation 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=20 2. Test conditions: (1) Ambient temperature and humidity: 25C 77F, 50 % RH (2) Measuring method see specification sheet; a) Insertion loss b) Isolation 30 30 20 20 10 0 0.0 Min. : 0.070 Max. : 0.728 Ave. : 0.379 n-1 : 0.161 10 Min. : 84.640 Max. : 115.220 Ave. : 98.251 n-1 : 8.987 0 0.2 0.4 0.6 0.8 Insertion loss (dB) 1.0 1.2 60 70 80 90 100 110 Isolation (dB) 120 130 140 7 A-7, 8 Return loss and P.D.L. 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=20 2. Test conditions: (1) Ambient temperature and humidity: 25C 77F, 50 % RH (2) Measuring method see specification sheet; a) Return loss b) P.D.L. 30 30 20 20 10 Min. : 55.426 Max. : 71.140 Ave. : 63.760 n-1 : 3.954 10 0 50 55 60 65 70 75 80 85 Min. : 0.005 Max. : 0.054 Ave. : 0.032 n-1 : 0.012 0 0.00 0.01 0.02 0.03 0.04 0.05 0.06 0.07 0.08 0.09 0.10 90 Return loss (dB) P.D.L. (dB) B-1 Optical input power B-2 Mechanical life test 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=6 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=6 2. Test conditions: (1) Optical input power ; 100 mW (2) Testing time ; 2 min. 2. Test conditions: (1) Coil voltage (2) Cycle Rate (3) Ambient temperature and humidity (4) Number of operations 3. Test results: No abnormality was observed for all samples after test. ; 4.5VDC (Nominal voltage) ; 10 Hz (On:OFF=0.05s:0.05s) ; 25C 77F, 50 % RH ; 1 x 107 operations 3. Test results: No abnormality was observed for all samples after 1107 operations. C-1 Vibration resistance test (Functional) C-2 Mechanical shock test (Functional) 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=3 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=3 2. Test conditions: (1) Frequency ; 10 to 55 Hz (2) Double amplitude ; 0.75 mm .030 inch (3) Coil ; De-energized (4) Detection level ; Optical power change : less than 20% (5) Vibration application directions ; 2 hours each against 3 directions 2. Test conditions: (1) Peak acceleration (2) Corresponding duration of the pulse (3) Number of shock applications (4) Coil (5) Detection level (6) Shock application directions 2 3 direction ; 1 2 34 56 4 2 3 ; 200 m/s2 ; 11 ms ; 5 times each ; De-energized ; Optical power change : less than 20% ; 6 directions 4 6 1 5 3. Test results: No abnormality was observed during and after test. 8 1 6 5 3. Test results: No abnormality was observed during and after test. C-3 Cable retention C-4 Cable side pull 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=3 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=3 2. Test conditions: (1) Tensile strength ; 450g 15.873oz (2) Rate ; 0.4mm .016inch/sec. (3) The testing time ; 1 min. (4) Coil ; De-energized (5) Check item ; Physical damage and optical characteristic (6) Tensile application directions 2. Test conditions: (1) Tensile strength ; 230g 8.113oz (2) Angle ; 90 (3) The time applied ; 5 sec. (4) Check item ; Physical damage and optical characteristic Measure the insertion loss after the load is applied for at least 5 seconds. Remove the load, and after 10 seconds remeasure the loss. (5) Tensile application directions pull 10 cm 3.937 inch 22 - 28 cm 8.661 - 11.024 inch pull Component housing Component housing 3. Test results: No abnormality was observed after test. 3. Test results: No abnormality was observed after test. D-1 Solder heat test D-2 High temperature storage 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=3 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=11 2. Test conditions: (1) Solder temperature (2) Soldering time (3) Solder (4) Test method 2. Test conditions: (1) Ambient temperature ; 852C 185 35.6F (2) Exposure period ; 2000 hours (14 days) ; 400 5C 752 41F ; 3 0.5 S ; Sn 96.5 % , Ag 3 % , Cu 0.5 % ; Switch terminals are inserted into double sided through-hole PCB. Each terminal is applied heat stress by sordering iron. 3. Test results: No abnormality was observed for all samples after 2000 hours. 3. Test results: No abnormality was observed for all samples after the test. D-3 Low temperature storage D-4 Temperature cycle 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=11 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=11 2. Test conditions: (1) Ambient temperature ; -402C -4035.6F (2) Exposure period ; 2000 hours 2. Test conditions: (1) Low temperature (2) High temperature (3) Number of cycles (4) Coil 3. Test results: No abnormality was observed for all samples after 2000 hours. ; -40C -40F ; 85C 185F ; 500 cycles ; De-energized 85C 185F -40C -40F T1 T2 1 cycle 1 hour T1 = 30 min. T2 = 30 min. 3. Test results: No abnormality was observed after 500 cycles. 9 D-5 Damp heat D-6 Humidity cycle 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=11 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=6 2. Test conditions: (1) Ambient Temperature ; 85C 185F (2) Ambient Humidity ; 85 % RH (3) Exposure period ; 1000 hours 2. Test conditions: (1) Number of cycles (2) Coil ; 100 cycles ; De-energized 95 Humidity Uncontrolled 3. Test results: No abnormality was observed for all samples after 1000 hours. 90 Humidity (%) 65 Temperature (C) 25 -10 0 8 5.5 2 7.5 17.5 13.5 10 15.5 1 cycle (24h) 3. Test results: No abnormality was observed after 100 cycles. D-7 Compound stress test 1. Sample: AWAP01226 (12 , 1550nm , 4.5VDC coil) n=3 2. Test conditions: A) Mechanical vibration (1) Frequency ; 10 to 500 Hz (2) Acceleration ; 98 m/s2 (Average), 294 m/s2 (Peak) (3) Coil ; De-energized B) Thermal shock (1) Low temperature (2) High temperature (3) Number of cycles (4) Coil ; -55C -67F ; 85C 185F ; 10 cycles ; De-energized Remark) Vibration is continuously applied during the thermal shock test. Samples are subjected the test under package condition. 3. Test results: No abnormality was observed after test. 10 18 21 24 22.5 (h)