MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
EV32C3 Series
• RoHS Compliant (Pb-Free)
• Voltage Controlled Crystal Oscillator (VCXO)
• 3.3V Supply Voltage
• HCMOS output with Tri-State function
• Ceramic 6-pad SMD package
• APR Performance to ±100ppm
• Commercial and Industrial Temperature Range
ECLIPTEK CORP. OSCILLATOR EV32C3 CERAMIC 3.3V OS58 04/09
OSCILLATOR
EV32C3
ELECTRICAL SPECIFICATIONS
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
H 1.65
L 7.0
W 5.0
Frequency Range (FO)
Operating Temperature Range (OTR)
Storage Temperature Range (STR)
Supply Voltage (VDD)
Input Current (IDD)
Frequency Tolerance/Stability
Output Voltage Logic High (VOH)
Output Voltage Logic Low (VOL)
Rise Time / Fall Time (TR/TF)
Duty Cycle (SYM)
Load Drive Capability (CLOAD)
Aging (at 25°C)
Start Up Time (TS)
Tri-State Input Voltage
RMS Phase Jitter
Absolute Pull Range (APR)
Linearity
Control Voltage (VC): Test Conditions for APR
Control Voltage Range (VCR)
Transfer Function
Input Impedance (ZI)
Input Leakage Current
Modulation Bandwidth (MBW)
Typical Phase Noise (Fo = 27.000MHz)
Inclusive of All Conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range, Supply
Voltage Change, Output Load Change, Shock, and Vibration
IOH = -4mA
IOL = +4mA
20% to 80% of Waveform
at 50% of Waveform
< 12.288MHz
> 12.288MHz
VIH: No Connection
VIH: >0.9VDD
VIL: <0.1VDD
FJ=12kHz to 20MHz
Inclusive of All Conditions: Calibration Tolerance at 25°C,
Frequency Stability over the Operating Temperature Range, Supply
Voltage Change, Output Load Change, Shock, Vibration, and Aging
over Control Voltage (VC)
-3dB, VC = 1.65VDC
At offset of 10Hz
At offset of 100Hz
At offset of 1kHz
At offset of 10kHz
At offset of 100kHz
0°C to 70°C or -40°C to 85°C
-55°C to 125°C
3.3VDC ±10%
15mA Maximum
±50ppm Maximum
90% of VDD Minimum
10% of VDD Maximum
5 nSeconds Maximum
50 ±5(%) Typical, 50 ±10(%) Maximum
10TTL Load or 30pF HCMOS Load Maximum
15pF HCMOS Load Maximum
±2ppm/1st year typical, ±10ppm /10 years Max.
10 mSeconds Maximum
Enables Output
Enables Output
Disables Output: High Impedance
1pSec Maximum
±50ppm Minimum
±80ppm Minimum < 51.840MHz only
±100ppm Minimum < 36.000MHz only
10% Typical, 20% Maximum
0.3VDC to 3.0VDC
0.0VDC to VDD
Positive Transfer Characteristic
50kOhms Minimum
10µA Maximum
10kHz Minimum
-70dBc/Hz
-100dBc/Hz
-130dBc/Hz
-147dBc/Hz
-152dBc/Hz
1.544MHz, 2.000MHz, 2.048MHz, 3.088MHz, 3.580MHz, 3.686MHz, 4.000MHz, 4.032MHz, 4.096MHz, 4.434MHz,
5.000MHz, 6.144MHz, 6.176MHz, 6.312MHz, 6.400MHz, 8.000MHz, 8.192MHz, 8.448MHz, 10.000MHz,
12.000MHz, 12.288MHz, 12.352MHz, 12.960MHz, 13.000MHz, 13.500MHz, 14.318MHz, 15.360MHz, 15.440MHz,
16.000MHz, 16.384MHz, 16.660MHz, 17.664MHz, 18.432MHz, 19.200MHz, 19.440MHz, 20.000MHz, 20.480MHz,
24.000MHz, 24.576MHz, 24.704MHz, 25.920MHz, 26.000MHz, 27.000MHz, 28.636MHz, 30.000MHz, 30.720MHz,
32.000MHz, 32.768MHz, 34.368MHz, 35.328MHz, 36.864MHz, 38.880MHz, 40.000MHz, 40.960MHz, 44.736MHz,
49.152MHz, 50.000MHz, 51.840MHz, 52.000MHz, 62.208MHz, 65.536MHz, 74.250MHz, 77.760MHz
MANUFACTURER CATEGORY
SERIES
PACKAGE
VOLTAGE
CLASS REV.DATE
ECLIPTEK CORP. OSCILLATOR EV32C3 CERAMIC 3.3V OS58 04/09
EV32C3 B 3 A 1 - 35.328M TR
OPERATING TEMPERATURE RANGE
A=0°C to 70°C,
B=-40°C to 85°C
ABSOLUTE PULL RANGE (APR)
3=±50ppm Minimum, 4=±80ppm Minimum,
5=±100ppm Minimum
PART NUMBERING GUIDE
A B C D E F
16±.3-.1 7.5±.1 6.75±.1 4 ±.1 2±.1
F G H J K L
8±.1 B0* 1.5 +.1-0 A0* .3 ±.05 K0*
TAPE
M N O P Q
1.5 MIN 50 MIN 20.2 MIN 13±.2 40 MIN
R S T U V
QTY/REEL
2.5 MIN 10 MIN 22.4 MAX 360 MAX 16.4+2-0 1,000
REEL
*Compliant to EIA 481A
MECHANICAL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
MARKING SPECIFICATIONS
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
SUGGESTED SOLDER PAD LAYOUT
ALL DIMENSIONS IN MILLIMETERS
TAPE AND REEL DIMENSIONS
ALL DIMENSIONS IN MILLIMETERS
Tolerances= +0.1
Line 1: ECLIPTEK
Line 2: XX.XXX M
Frequency in MHz (5 Digits Maximum + Decimal)
Line 3: XX Y ZZ
Week of Year
Last Digit of Year
Ecliptek Manufacturing Identifier
800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice.
Pin 1: Control Voltage (VC)
Pin 2: No Connect
Pin 3: Case Ground
Pin 4: Output
Pin 5: Tri-State
Pin 6: Supply Voltage
AVAILABLE OPTIONS
Blank=Bulk (Standard)
TR=Tape and Reel
FREQUENCY
Characteristic Specification
Fine Leak Test MIL-STD-883, Method 1014, Condition A
Gross Leak Test MIL-STD-883, Method 1014, Condition C
Mechanical Shock MIL-STD-202, Method 213, Condition C
Vibration MIL-STD-883, Method 2007, Condition A
Solderability MIL-STD-883, Method 2002
Temperature Cycling MIL-STD-883, Method 1010
Resistance to Soldering Heat MIL-STD-202, Method 210
Resistance to Solvents MIL-STD-202, Method 215
