2N6058 and 2N6059 Available on commercial versions NPN Darlington Power Silicon Transistor Qualified per MIL-PRF-19500/502 Qualified Levels: JAN, JANTX, and JANTXV DESCRIPTION This high speed NPN transistor is rated at 12 amps and is military qualified up to a JANTXV level. This TO-204AA isolated package features a 180 degree lead orientation. Important: For the latest information, visit our website http://www.microsemi.com. TO-204AA (TO-3) Package FEATURES * JEDEC registered 2N6058 and 2N6059 * JAN, JANTX, and JANTXV qualifications are available per MIL-PRF-19500/502 * RoHS compliant versions available (commercial grade only) APPLICATIONS / BENEFITS * Military, space and other high reliability applications * * High frequency response TO-204AA case with isolated terminals o MAXIMUM RATINGS @ T C = +25 C unless otherwise noted Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-Case Collector Current Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Total Power Dissipation 2N6058 2N6059 2N6058 2N6059 o @ T C = +25 C o @ T C = +100 C (1) Symbol Value T J and T STG R JC IC V CEO -55 to +175 1.0 12 80 100 80 100 5 150 75 V CBO V EBO PT Notes: 1. Derate linearly 1.0 W/oC above T C > +25 oC. T4-LDS-0307, Rev. 1 (8/5/13) Unit o o C C/W A V MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 (978) 620-2600 Fax: (978) 689-0803 V V W MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com (c)2013 Microsemi Corporation Page 1 of 8 2N6058 and 2N6059 MECHANICAL and PACKAGING * * * * * * CASE: Industry standard TO-204AD (TO-3), hermetically sealed, 0.040 inch diameter pins. FINISH: Solder dipped tin-lead over nickel plated alloy 52 or RoHS compliant matte-tin plating. Solderable per MIL-STD-750 method 2026. POLARITY: NPN (see schematic) MOUNTING HARDWARE: Consult factory for optional insulator and sheet metal screws WEIGHT: Approximately 15 grams See package dimensions on last page. PART NOMENCLATURE JAN 2N6058 (e3) Reliability Level JAN = JAN Level JANTX = JANTX Level JANTXV = JANTXV Level Blank = Commercial RoHS Compliance e3 = RoHS Compliant (available on commercial grade only) Blank = non-RoHS Compliant JEDEC type number (see Electrical Characteristics table) Symbol IB IC IE TC V CB V CBO V CC V CE V CEO V EB V EBO SYMBOLS & DEFINITIONS Definition Base current: The value of the dc current into the base terminal. Collector current: The value of the dc current into the collector terminal. Emitter current: The value of the dc current into the emitter terminal. Case temperature: The temperature measured at a specified location on the case of a device. Collector-base voltage: The dc voltage between the collector and the base. Collector-base voltage, base open: The voltage between the collector and base terminals when the emitter terminal is open-circuited. Collector-supply voltage: The supply voltage applied to a circuit connected to the collector. Collector-emitter voltage: The dc voltage between the collector and the emitter. Collector-emitter voltage, base open: The voltage between the collector and the emitter terminals when the base terminal is open-circuited. Emitter-base voltage: The dc voltage between the emitter and the base. Emitter-base voltage, collector open: The voltage between the emitter and base terminals with the collector terminal open-circuited. T4-LDS-0307, Rev. 1 (8/5/13) (c)2013 Microsemi Corporation Page 2 of 8 2N6058 and 2N6059 o ELECTRICAL CHARACTERISTICS @ T A = +25 C unless otherwise noted Characteristics OFF CHARACTERISTICS Collector-Emitter Breakdown Voltage IC = 100 mA Collector-Emitter Cutoff Current VCE = 40 V VCE = 50 V Collector-Emitter Cutoff Current VCE = 80 V, VEB = 1.5 V VCE = 150 V, VEB = 1.5 V Symbol Min. 2N6058 2N6059 V(BR)CEO 80 100 2N6058 2N6059 ICEO 1.0 1.0 mA 2N6058 2N6059 ICEX 10 10 A IEBO 2.0 mA Emitter-Base Cutoff Current VEB = 5.0 V ON CHARACTERISTICS Forward-Current Transfer Ratio IC = 1.0 A, VCE = 3.0 V IC = 6.0 A, VCE = 3.0 V IC = 12 A, VCE = 3.0 V Collector-Emitter Saturation Voltage IC = 12 A, IB = 120 mA IC = 6.0 A, IB = 24 mA Base-Emitter Saturation Voltage IC = 12 A, IB = 120 mA Base-Emitter Voltage Non-saturated VCE = 3.0 V, IC = 6 A hFE Unit V 18,000 VCE(sat) 3.0 2.0 V VBE(sat) 4.0 V VBE 2.8 V DYNAMIC CHARACTERISTICS Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 5 A, VCE = 3.0 V, f = 1 kHz Magnitude of Common Emitter Small-Signal Short-Circuit Forward Current Transfer Ratio IC = 5 A, VCE = 3.0 V, f = 1 MHz Output Capacitance VCB = 10 V, IE = 0, f = 100 kHz f 1 MHz T4-LDS-0307, Rev. 1 (8/5/13) 1,000 1,000 150 Max. (c)2013 Microsemi Corporation hfe 1,000 |hfe| 10 Cobo 250 300 pF Page 3 of 8 2N6058 and 2N6059 o ELECTRICAL CHARACTERISTICS @ T C = 25 C unless otherwise noted. (continued) SWITCHING CHARACTERISTICS Turn-On Time VCC = 30 V, IC = 5 A; IB1= 20 mA Turn-Off Time VCC = 30 V, IC = 5 A; IB1= 20 mA t on 2.0 s t off 10 s SAFE OPERATING AREA (See figures 1 and 2 and MIL-STD-750,Test Method 3053) DC Tests TC = +25 C, +10 C, -0 C, t 1 second, 1 Cycle Test 1 VCE = 12.5 V, IC = 12 A Test 2 VCE = 30 V, IC = 5 A Test 3 VCE = 70 V, IC = 200 mA (2N6058) VCE = 90 V, IC = 155 mA (2N6059) T4-LDS-0307, Rev. 1 (8/5/13) (c)2013 Microsemi Corporation Page 4 of 8 2N6058 and 2N6059 IC = Collector Current (Amperes) SAFE OPERATING AREA V CE - Collector to Emitter Volatge (Volts) FIGURE 1 Maximum Safe Operating Area (continuous dc) T4-LDS-0307, Rev. 1 (8/5/13) (c)2013 Microsemi Corporation Page 5 of 8 2N6058 and 2N6059 IC - Collector Current (Amperes) SAFE OPERATING AREA (continued) L - Inductance (Millihenries) FIGURE 2 Safe Operating Area For Switching Between Saturation And Cutoff (unclamped inductive load) T4-LDS-0307, Rev. 1 (8/5/13) (c)2013 Microsemi Corporation Page 6 of 8 2N6058 and 2N6059 PACKAGE DIMENSIONS Ltr CD CH HR HR1 HT LD LL LL1 MHD MHS PS PS1 S1 T1 T2 Case Dimensions Inches Millimeters Min Max Min Max 0.875 22.23 0.250 0.328 6.35 8.33 0.495 0.525 12.57 13.34 0.131 0.188 3.33 4.78 0.060 0.135 1.52 3.43 0.038 0.043 0.97 1.09 0.312 0.500 7.92 12.70 0.050 1.27 0.151 0.161 3.84 4.09 1.177 1.197 29.90 30.40 0.420 0.440 10.67 11.18 0.205 0.225 5.21 5.72 0.655 0.675 16.64 17.15 Emitter Base Collector Notes 3 4, 5 4 4, 5 6 7, 8 7, 4, 8 7 NOTES: 1. 2. 3. 4. 5. Dimensions are in inches. Millimeters are given for information only. Body contour is optional within zone defined by dimension CD. At both ends Both terminals Dimension LD applies between dimension L1 and LL. Lead diameter shall not exceed twice dimension LD within dimension L1. Diameter is uncontrolled in dimension L1. 6. Two holes 7. These dimensions shall be measured at points 0.050 inch (1.27 mm) to 0.055 inch (1.40 mm) below the seating plane. When gauge is not used, measurement shall be made at seating plane. 8. The seating plane of the header shall be flat within 0.001 inch (0.03 mm) concave to 0.004 inch (0.10 mm) convex inside a 0.930 inch (23.62 mm) diameter circle on the center of the header and flat within 0.001 inch (0.03 mm) concave to 0.006 inch (0.15 mm) convex overall. 9. The collector shall be electrically connected to the case. 10. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. See schematic on next page T4-LDS-0307, Rev. 1 (8/5/13) (c)2013 Microsemi Corporation Page 7 of 8 2N6058 and 2N6059 SCHEMATIC T4-LDS-0307, Rev. 1 (8/5/13) (c)2013 Microsemi Corporation Page 8 of 8