STPSC10H065-Y Automotive 650 V power Schottky silicon carbide diode Datasheet - production data Description $ . . . $ 1& 72$& . $ '3$. Features The SiC diode is an ultrahigh performance power Schottky diode. It is manufactured using a silicon carbide substrate. The wide band gap material allows the design of a Schottky diode structure with a 650 V rating. Due to the Schottky construction, no recovery is shown at turn-off and ringing patterns are negligible. The minimal capacitive turn-off behavior is independent of temperature and are ideal for automotive applications. Especially suited for use in PFC applications, this ST SiC diode will boost the performance in hard switching conditions. Its high forward surge capability ensures a good robustness during transient phases. * No reverse recovery charge in application current range * Switching behavior independent of temperature * Dedicated to PFC applications * High forward surge capability * AEC-Q101 qualified Table 1. Device summary Symbol Value IF(AV) 10 A VRRM 650 V Tj (max) 175 C * PPAP capable * ECOPACK(R)2 compliant component September 2015 This is information on a product in full production. DocID026618 Rev 3 1/10 www.st.com Characteristics 1 STPSC10H065-Y Characteristics Table 2. Absolute ratings (limiting values at 25 C unless otherwise specified) Symbol Parameter VRRM Repetitive peak reverse voltage IF(RMS) Forward rms current Tj = -40 C (1) Value Unit 650 V 22 A IF(AV) Average forward current Tc = 135 C , DC 10 A IFSM Surge non repetitive forward current tp = 10 ms sinusoidal, Tc = 25 C tp = 10 ms sinusoidal, Tc = 125 C tp = 10 s square, Tc = 25 C 90 80 470 A IFRM Repetitive peak forward current Tc = 135 C(1), Tj = 175 C, = 0.1 41 A Tstg Storage temperature range -55 to +175 C -40 to +175 C Operating junction Tj temperature(2) 1. Value based on Rth(j-c) max. 2. dPtot --------------dTj 1 -------------------------- condition to avoid thermal runaway for a diode on its own heatsink < Rth (j - a) Table 3. Thermal resistance Symbol Rth(j-c) Parameter Junction to case (TO-220AC and D2PAK) Typ. value Max. value Unit 1.25 1.5 C/W Table 4. Static electrical characteristics Symbol Parameter Tests conditions IR (1) Reverse leakage current VF (2) Forward voltage drop Tj = 25 C Tj = 150 C Tj = 25 C Tj = 150 C VR = VRRM IF = 10 A Min. Typ. Max. - 9 100 - 85 425 - 1.56 1.75 - 1.98 2.5 Unit A V 1. Pulse test: tp = 10 ms, < 2% 2. Pulse test: tp = 500 s, < 2% To evaluate the conduction losses use the following equation: P = 1.35 x IF(AV) + 0.115 x IF2(RMS) Table 5. Dynamic electrical characteristics Symbol Parameter Qcj(1) Total capacitive charge Cj Total capacitance Test conditions Typ. Unit VR = 400 V, 28.5 nC VR = 0 V, Tc = 25 C, F = 1 MHz 480 VR = 400 V, Tc = 25 C, F = 1 MHz 48 1. Most accurate value for the capacitive charge: 2/10 VOUT Qcj = 0 cj(vR).dvR DocID026618 Rev 3 pF STPSC10H065-Y Characteristics Figure 1. Forward voltage drop versus forward Figure 2. Forward voltage drop versus forward current (typical values, low level) current (typical values, high level) IF(A) 20 18 80 Ta=25 C 14 12 70 Ta=150 C Ta=100 C 10 60 8 40 6 30 4 20 2 0.5 1.0 1.5 2.0 2.5 3.0 Ta=150 C Ta=175 C 0 3.5 IR(A) 1 2 3 4 5 6 7 8 Figure 4. Peak forward current versus case temperature 80 I M (A) d = 0.1 70 Tj=175 C T IM d =tp/T 60 tp 50 Tj=150 C 1.E+01 d = 0.3 40 1.E+00 d = 0.5 30 20 1.E-01 Tj=25 C 1.E-02 0 50 100 150 200 250 300 350 400 450 500 550 600 650 0 450 400 50 75 100 125 150 175 Zth(j-c)/Rth(j-c) 0.9 0.8 350 0.7 300 0.6 250 0.5 200 0.4 150 0.3 100 25 Figure 6. Relative variation of thermal impedance junction to case versus pulse duration 1.0 F=1 MHz VOSC=30 mVRMS Tj=25 C TC(C) 0 Figure 5. Junction capacitance versus reverse voltage applied (typical values) Cj (pF) d = 0.7 d=1 10 VR(V) 500 VF (V) 0 Figure 3. Reverse leakage current versus reverse voltage applied (typical values) 1.E+02 Ta=100 C 10 VF (V) 0 Ta=25 C 50 Ta=175 C 0.0 Pulse test : tp=500s 90 16 1.E+03 IF(A) 100 Pulse test : tp=500s 0.2 50 0.1 10.0 0.0 1.E-05 0 0.1 1.0 Single pulse VR(V) 100.0 1000.0 DocID026618 Rev 3 1.E-04 tp(s) 1.E-03 1.E-02 1.E-01 1.E+00 3/10 10 Characteristics STPSC10H065-Y Figure 7. Non-repetitive peak surge forward current versus pulse duration (sinusoidal waveform) 1.E+03 IFSM (A) Figure 8. Total capacitive charges versus reverse voltage applied (typical values) 32 Qcj (nC) 28 Ta=25 C 24 20 Ta=125 C 1.E+02 16 12 8 4 VR (V) tp(s) 1.E+01 1.E-05 4/10 0 1.E-04 1.E-03 1.E-02 0 DocID026618 Rev 3 50 100 150 200 250 300 350 400 STPSC10H065-Y 2 Package information Package information * Epoxy meets UL94, V0 * Recommended torque value: 0.4 to 0.6 N*m * Cooling method: conduction (C) In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 2.1 D2PAK package information Figure 9. D2PAK package outline A E C2 L2 D L L3 A1 B2 R C B G A2 M * V2 * FLAT ZONE NO LESS THAN 2mm DocID026618 Rev 3 5/10 10 Package information STPSC10H065-Y Table 6. D2PAK package mechanical data Dimensions Ref. Millimeters Inches Min. Typ. Max. Min. Typ. Max. A 4.40 4.60 0.173 0.181 A 4.40 A1 2.49 2.69 0.098 0.106 A1 2.49 A2 0.03 0.23 0.001 0.009 A2 0.03 B 0.70 0.93 0.027 0.037 B 0.70 B2 1.14 1.70 0.045 0.067 B2 1.14 C 0.45 0.60 0.017 0.024 C 0.45 C2 1.23 1.36 0.048 0.054 C2 1.23 D 8.95 9.35 0.352 0.368 D 8.95 E 10.00 10.40 0.393 0.409 E 10.00 G 4.88 5.28 0.192 0.208 G 4.88 L 15.00 15.85 0.590 0.624 L 15.00 L2 1.27 1.40 0.050 0.055 L2 1.27 L3 1.40 1.75 0.055 0.069 L3 1.40 M 2.40 3.20 0.094 0.126 M 2.40 R V2 0.40 0.016 0 8 0 8 Figure 10. Footprint (dimensions in mm) 6/10 DocID026618 Rev 3 STPSC10H065-Y 2.2 Package information TO-220AC package information Figure 11. TO-220AC dimension definitions A H2 OI C L5 L7 L6 L2 F1 D L9 L4 F M E G DocID026618 Rev 3 7/10 10 Package information STPSC10H065-Y Table 7. TO-220AC dimension values Dimensions Ref. Millimeters Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 L2 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I 8/10 Inches 2.6 typ. 3.75 0.102 typ. 3.85 DocID026618 Rev 3 0.147 0.151 STPSC10H065-Y 3 Ordering information Ordering information Table 8. Ordering information 4 Order code Marking Package Weight Base qty Delivery mode STPSC10H065GY-TR PSC10H065GY D2PAK 1.48 g 1000 Tape and reel STPSC10H065DY PSC10H065DY TO-220AC 1.86 g 50 Tube Revision history Table 9. Document revision history Date Revision Changes 26-Jun-2014 1 First issue. 19-Sep-2014 2 Updated Table 8. 24-Sep-2015 3 Added device in D2PAK. Updated the entire document accordingly. DocID026618 Rev 3 9/10 10 STPSC10H065-Y IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2015 STMicroelectronics - All rights reserved 10/10 DocID026618 Rev 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STPSC10H065DY STPSC10H065GY-TR