Semiconductor Components Industries, LLC, 2000
December, 2000 – Rev. 5 1Publication Order Number:
MBR6045PT/D
MBR6045PT
SWITCHMODE
Power Rectifier
The SWITCHMODE power rectifier employs the use of the
Schottky Barrier principle with a Platinum barrier metal. This
state-of-the-art device has the following features:
•Dual Diode Construction – Terminals 1 and 3 May Be Connected for
Parallel Operation at Full Rating
•45 Volt Blocking Voltage
•Low Forward Voltage Drop
•Guardring for Stress Protection and High dv/dt Capability
(> 10 V/ns)
•150°C Operating Junction Temperature
Mechanical Characteristics
•Case: Epoxy, Molded
•Weight: 4.3 grams (approximately)
•Finish: All External Surfaces Corrosion Resistant and Terminal
Leads are Readily Solderable
•Lead Temperature for Soldering Purposes:
260°C Max. for 10 Seconds
•Shipped 30 Units Per Plastic Tube
•Marking: MBR6045PT
MAXIMUM RATINGS
Rating Symbol Max Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
45 V
Average Rectified Forward Current
(Rated VR, TC = 125°C) Per Diode
Per Device
IF(AV) 30
60
A
Peak Repetitive Forward Current,
(Rated VR, Square Wave, 20 kHz
@ TC = 90°C) Per Diode
IFRM 60 A
Non–Repetitive Peak Surge Current
(Surge Applied at Rated Load
Conditions Halfwave, Single
Phase, 60 Hz)
IFSM 500 A
Peak Repetitive Reverse Current
(2.0 s, 1.0 kHz) IRRM 2.0 A
Storage Temperature Range Tstg –65 to +175 °C
Operating Junction Temperature TJ–65 to +150 °C
Peak Surge Junction Temperature
(Forward Current Applied) TJ(pk) 175 °C
Voltage Rate of Change dv/dt 10,000 V/sDevice Package Shipping
ORDERING INFORMATION
MBR6045PT SOT–93
http://onsemi.com
30 Units/Rail
SCHOTTKY BARRIER
RECTIFIER
60 AMPERES
45 VOLTS
3
1
2,4
2
4
1
3
MARKING DIAGRAM
MBR6045PT
MBR6045PT = Device Code
SOT–93
CASE 340D
STYLE 2
MBR6045PT
http://onsemi.com
2
THERMAL CHARACTERISTICS
Rating Symbol Max Unit
Thermal Resistance – Junction to Case RθJC 1.0 °C/W
ELECTRICAL CHARACTERISTICS
Instantaneous Forward Voltage (Note 1.)
@ IF = 30 Amps, TC = 25°C
@ IF = 30 Amps, TC = 125°C
@ IF = 60 Amps, TC = 25°C
VF0.62
0.55
0.75
Volts
Instantaneous Reverse Current (Note 1.)
@ Rated DC Voltage, TC = 25°C
@ Rated DC Voltage, TC = 100°C
IR1.0
50
mA
1. Pulse Test: Pulse Width = 300 µs, Duty Cycle ≤2.0%
TYPICAL ELECTRICAL CHARACTERISTICS
Figure 1. Typical Reverse Current Figure 2. Typical Forward Voltage
VR, REVERSE VOLTAGE (VOLTS)
IR, REVERSE CURRENT (mA)
vF, INSTANTANEOUS FORWARD VOLTAGE (mV)
iF, INSTANTANEOUS FORWARD CURRENT (AMPS)
1000
100
10
1
0.1
0.01 50403020100
TC = 150°C
TC = 100°C
TC = 25°C
100
10
1100 200 300 400 500 600 700 800
150°C 100°C TC = 25°C
MBR6045PT
http://onsemi.com
3
PACKAGE DIMENSIONS
SOT–93
(TO–218)
PLASTIC
CASE 340D–02
ISSUE B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
A
D
VG
K
SL
U
BQEC
J
H
DIM MIN MAX MIN MAX
INCHESMILLIMETERS
A--- 20.35 --- 0.801
B14.70 15.20 0.579 0.598
C4.70 4.90 0.185 0.193
D1.10 1.30 0.043 0.051
E1.17 1.37 0.046 0.054
G5.40 5.55 0.213 0.219
H2.00 3.00 0.079 0.118
J0.50 0.78 0.020 0.031
K31.00 REF 1.220 REF
L--- 16.20 --- 0.638
Q4.00 4.10 0.158 0.161
S17.80 18.20 0.701 0.717
U4.00 REF 0.157 REF
V1.75 REF 0.069
123
4
STYLE 2:
PIN 1. ANODE
2. CATHODE
3. ANODE
4. CATHODE
MBR6045PT
http://onsemi.com
4
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes
without further notice to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular
purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability,
including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or
death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold
SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable
attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim
alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
CENTRAL/SOUTH AMERICA:
Spanish Phone: 303–308–7143 (Mon–Fri 8:00am to 5:00pm MST)
Email: ONlit–spanish@hibbertco.com
Toll–Free from Mexico: Dial 01–800–288–2872 for Access –
then Dial 866–297–9322
ASIA/PACIFIC: LDC for ON Semiconductor – Asia Support
Phone: 303–675–2121 (Tue–Fri 9:00am to 1:00pm, Hong Kong Time)
Toll Free from Hong Kong & Singapore:
001–800–4422–3781
Email: ONlit–asia@hibbertco.com
JAPAN: ON Semiconductor, Japan Customer Focus Center
4–32–1 Nishi–Gotanda, Shinagawa–ku, Tokyo, Japan 141–0031
Phone: 81–3–5740–2700
Email: r14525@onsemi.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
MBR6045PT/D
SWITCHMODE is a trademark of Semiconductor Components Industries, LLC.
NORTH AMERICA Literature Fulfillment:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303–675–2175 or 800–344–3860 Toll Free USA/Canada
Fax: 303–675–2176 or 800–344–3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
Fax Response Line: 303–675–2167 or 800–344–3810 Toll Free USA/Canada
N. American Technical Support: 800–282–9855 Toll Free USA/Canada
EUROPE: LDC for ON Semiconductor – European Support
German Phone: (+1) 303–308–7140 (Mon–Fri 2:30pm to 7:00pm CET)
Email: ONlit–german@hibbertco.com
French Phone: (+1) 303–308–7141 (Mon–Fri 2:00pm to 7:00pm CET)
Email: ONlit–french@hibbertco.com
English Phone: (+1) 303–308–7142 (Mon–Fri 12:00pm to 5:00pm GMT)
Email: ONlit@hibbertco.com
EUROPEAN TOLL–FREE ACCESS*: 00–800–4422–3781
*Available from Germany, France, Italy, UK, Ireland
