RN-800S-CB
www.rovingnetworks.com
809 University Ave. Los Gatos, Ca. 95032
(408)395-6539
C
opyright 2009
Bluetooth Sensor Interface
BlueSentry connects to industry standard sensors
to provide wireless, remote signal monitoring and
device control in industrial and commercial
environments.
Easily attaches to analog sensor outputs,
automatically takes continuous measurements.
Data is transferred wirelessly to PCand PDA
clients using the Bluetooth Serial Port Profile
(SPP). Or the BlueSentry can be paired with the
BluePort XP serial adapter or Fireplug USB
dongle to create a wireless serial port connection.
Software applications can control and acquire
data as if they were connected to a local serial
port.
Wireless Analog Data Transfer
BlueSentry contains a built in processor and
smart Bluetooth radio. The device is programmed
over Bluetooth via simple ASCII commands. Both
ASCII and binary data formats are supported.
Channels can be selected as single ended or
differential measurements.
Features
• Eight 16 bit Input A/D channels 0-5VDC at up to
3000Hz sample rate.
• Two on board FET switches for powering
external sensors.
• Two general purpose inputs/outputs (15ma
drive) for control.
• High Power (Class 1 - 16db TX) – 100Meter
Bluetooth™ radio with integral chip antennae.
• External SMA jack Antennae option, order RN-
800S-E.
• Low power 6-12VDC (75ma) can run from 4-
AAA batteries.
• Serial Port Profile enabled, slave or master
mode capable.
• Low power sleep and wake on connect options.
• Screw post (power in, 2 ch), RJ45 (power in, 6
ch) and 12 pin internal header connections.
• Small form factor: 1.6” X 3.0” X 0.9”
Applications
• Remote Temperature Sensor
• Wireless Motor Control
• Remote Motion Sensors
• Wireless control and monitoring
BlueSentry
