1:1 Transmission line
Transformer
4.5 - 3000 MHz Rev B
MABACT0010
Features:
Surface Mount
1:1 Impedence
Available on tape & reel
Description
M/A Com’s MABACT0010 is a 1:1 RF Transmis-
sion Line transformer in a low cost surface mount
package.It is ideally suited for high volume CATV/
Broadband applications.
Electrical Specifications: 25°C, Impedance = 75 Ohms
Parameter Frequency (MHz) Units Minimum Typical Maximum
Frequency Range 4.5 - 3000
Insertion Loss 4.5-1000 dB - 0.8 1.0
Insertion Loss 1000-2000 dB - 1.6 2.0
Insertion Loss 2000-3000 dB - 2.5 3.5
Amplitude Unbalance 4.5-1000 dB - 0.5 1.0
Phase Unbalance 4.5-1000 ° - 10 20
1
Ordering Information
Part Number Package
MABACT0010 Tape & Reel
123
54
SM-22B
Dimensions in inches [mm] Tolerance: .xx ± .02, .xxx ± .010
1:1 Transmission line Transformer, 4.5-3000MHz MABACT0010
Absolute Maximum Ratings
2
Pin Configuration
Parameter Maximum
RF input power 250mW
DC current 30mA
Operating temperature -40°C - +85°C
Storage temperature -40°C - +85°C
Function Pin #
Secondary 1
Not Connected 2
Secondary Dot 3
Primary Dot 4
Primary 5
Amplitude Unbalance
Insertion Loss Port
Phase Unbalance
Input Impedence
Schematic
North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
India Tel: +91.80.4155721 China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions is
considering for development. Performance is based on target specifications, simulated results, and/or prototype
measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has
under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline
has been fixed. Engineering samples and/or test data may be available. Commitment to produce in volume is
not guaranteed.