INTERCONNECTS Solder Cup Headers and Sockets Single and Double Row Number of Pins 0,99 DIA. 2,54 HOLE 1,83 DIA. 3,23 2,79 3,15 0,51 DIA. Series 329, 380, 429, 480 * Series 380 & 480 use M-M #8000 pins. See page 174 for details. * Series 329 & 429 use M-M #2954 pin receptacles and accept pin diameters from 0,38 - 0,64. See page 140 for details. * Series 329 & 429 receptacles use Hi-Rel, 4 finger #30 contacts rated at 3 amps. See page 208 for details. 4,22 2,54 * Solder cups are pre-aligned. Fig. 1 Ordering Information Number of Pins 2,54 0,99 DIA. Series 380...001 HOLE 3,23 1,83 DIA. Fig. 1 2,79 3,15 Solder Cup / Solder Tail 380-XX-1_ _-00-001000 Specify # of pins 0,51 DIA. 01-64 4,22 Series 480...001 2,54 2,54 Specify # of pins 0,38-0,64 0,25 * 0,46 XX= Plating Code See Below Number of Pins 2,54 2,54 2,54 2,79 3,81 SPECIFY PLATING CODE XX= 7,37 Pin Plating 1,35 DIA. 1,52 480-XX-2 _ _-00-001000 Fig. 2 Fig. 2 Solder Cup / Solder Tail 2,29 02-64 For RoHS compliance, select plating code. For the gold option (XX=10) also change part number from X80-XX-XXX-00-001000 to X80-10-XXX-00-001100 10 90 0,25m Au 40 5,08mSn/Pb Series 329...540 5,08mSn Solder Cup Sockets 0,97 DIA. 2,54 HOLE 329-XX-1 _ _-41-540000 Fig. 3 Specify # of pins Fig. 3 01-64 Series 429...540 0,38-0,64 0,25 * 0,46 Number of Pins 2,54 5,08 Solder Cup Sockets 429-XX-2 _ _-41-540000 Fig. 4 Specify # of pins 2,54 2,79 7,37 1,35 DIA. 1,52 02-64 3,81 XX= Plating Code See Below 2,29 0,97 DIA. 2,54 HOLE 2,54 SPECIFY PLATING CODE XX= Fig. 4 w w w. m i l l - m a x . c o m 13 For RoHS compliance, select plating code. For the gold option (XX=13) also change part number from X29-XX-XXX-41-540000 to X29-13-XXX-41-540100 93 43 Sleeve (Pin) 0,25mAu 5,08mSn/Pb 5,08mSn Contact (Clip) 0,76mAu 0,76mAu 0,76mAu 65.1 516-922-6000