EGP30A-EGP30K EGP30A - EGP30K Features * Glass passivated cavity-free junction. * High surge current capability. * Low leakage current. * Superfast recovery time for high efficiency. * Low forward voltage, high current capability. DO-201AD COLOR BAND DENOTES CATHODE Dimensions in inches (mm) 3.0 Ampere Glass Passivated High Efficiency Rectifiers Absolute Maximum Ratings* Symbol IF(AV) IFSM PD RJA TA = 25C unless otherwise noted Parameter Average Rectified Current .375 " lead length @ TA = 55C Non-repetitive Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient Value Units 3.0 A 125 A 6.25 50 20 W mW/C C/W RJL Thermal Resistance, Junction to Lead 8.5 C/W Tstg Storage Temperature Range -65 to +150 C TJ Operating Junction Temperature -65 to +150 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics Symbol VRRM TA = 25C unless otherwise noted Parameter Maximum Repetitive Reverse Voltage Device Units 30A 30B 30C 30D 30F 30G 30J 30K 50 100 150 200 300 400 600 800 V VRMS Maximum RMS Voltage 35 70 105 140 210 280 420 560 V VR DC Reverse Voltage (Rated VR) 50 100 150 200 300 400 600 800 V IRM Maximum Instantaneous Reverse Current @ rated VR TA = 25C TA = 125C Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Maximum Instantaneous Forward Voltage @ 3.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz trr VFM C 2001 Fairchild Semiconductor Corporation 5.0 100 50 0.95 95 1.25 75 75 A A ns 1.7 V pF EGP30A - EGP30K, Rev. A1 EGP30A-EGP30K Typical Characteristics FORWARD CURRENT (A) 2 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.0mm) LEAD LENGTHS 1 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE ( C) 175 PEAK FORWARD SURGE CURRENT (A) Non-Repetitive Surge Current Forward Current Derating Curve 3 175 150 125 100 75 50 25 0 1 Forward Characteristics REVERSE CURRENT ( A) EGP30A-EGP30D T A= 25 C 1 EGP30F-EGP30K 0.1 0.01 0.2 Pulse Width = 300 s 2% Duty Cycle 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 100 T A = 150 C 10 1 0.1 T A = 125 C TA = 75 C 0.01 TA = 25 C 1.6 1.8 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Junction Capacitance 210 180 CAPACITANCE (pF) FORWARD CURRENT (A) 100 T A = 150 C 5 10 20 50 NUMBER OF CYCLES AT 60Hz Reverse Characteristics 50 10 2 150 120 EGP30A-EGP30D 90 EGP30F-EGP30K 60 30 0 0.1 50 NONINDUCTIVE 1 10 100 REVERSE VOLTAGE (V) 50 NONINDUCTIVE +0.5A 50 NONINDUCTIVE trr (-) DUT 50V (approx) 1000 Pulse Generator (Note 2) OSCILLOSCOPE (Note 1) 0 -0.25A (+) NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram EGP30A - EGP30K, Rev. A1 DO-201AD/AE Tape and Reel Data DO-201AD/AE Packaging Configuration: Figure 1.0 F63TNR or Human Readable Label DO-201AD/AE TNR Intermediate Container Options Corrugated Outer liner White (Anode) Red/Blue (Cathode) Kraft Paper wounded between layers 340mm x 340mm x 410mm (6,250 max) F63TNR Label sample DO-201AD/AE Packaging Information Table : Figure 2.0 DO-201AD/AE Packaging Information Under package code P3 TNR Packaging Option Packaging type Qty per Reel/Tube/Bag LOT: CBVK741B019 QTY: 1250 FSID: 1N5400 SPEC: D/C1: T0030 QTY1: SPEC REV: D/C2: QTY2: CPN: FAIRCHILD SEMICONDUCTOR INTERNATIONAL (F63TNR)3.2 1250 Reel Size (inch diameter) 13 Inside Tape Spacing (mm) Human Readable Label sample 52 Int Box Dimension (mm) CAUTION: This container provides protection for static sensitive devices. Handle devices with caution upon removal. 340x340x410 Max qty per Box MADE IN ONE OR MORE OF THE FOLLOWING COUNTRIES: PHILIPPINES (MACTAN, EXPORT PROCESSING ZONE), MALAYSIA, CHINA, S. KOREA, TAIWAN, THAILAND, SINGAPORE AND JAPAN. 6,250 Weight per unit (gm) 1.20 AD/1.10 AE Weight per Reel (kg) 1.50 AD/1.20 AE I.D. 1N5400 ANTI-STATIC D/C Note/Comments DO-201AD/AE Taping Dimension: Figure 5.0 Lot Qty 1250 CBVK741B019 TAPING DIMENSIONS H INCH MM MILS NOTES 2.520 +0.066/ -0.027 64.00 +1.69/ -0.69 2519 +66.5/ -27.0 Overall width 1.496 +0.059/ -0.039 38.00 +1.5 -1.0 1496 +59 -39 B 2.0470.027 52 0.69 204727 C 0.200 0.0157 10.08 0.40 394 15.7 D 0.047(max) 1.2(max) 47(max) Component Misalignment E 0.022(max) 0.55(max) 22(max) Tape Mismatch F 0.027(max) 0.69 27 Units in line w/ one another G 0.126(min) 3.2(min) 126(min) Lead amount between tapes H 0 0 0 Lead amount beyond tapes L1-L2 0.027 0.69 27 Delta between two leads G A L1 F B L2 E D C T0030 A Inside Tape Spacing Component Pitch REEL DIMENSIONS ITEM DESCRIPTION SYMBOL MINIMUM MAXIMUM Reel Diameter Arbor Hole Diameter (Standard) D1 13.875 14.125 D2 1.245 1.255 Core Diameter D3 3.190 3.310 Flange to Flange Outer Width W1 D1 D2 3.400 Note: All Dimensions are in inches W1 D3 (c)2000 Fairchild Semiconductor International August 2000, Rev. A DO-201AD Package Dimensions DO-201AD (FS PKG Code P3) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 1.1 1.0 min (25.4) 0.375 (9.53) 0.285 (7.24) (c)2000 Fairchild Semiconductor International 0.220 (5.60) 0.190 (4.83) 0.052 (1.32) 0.048 (1.22) August 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G