TOPLED High-optical Power LED (HOP) Lead (Pb) Free Product - RoHS Compliant LP T675 Released Besondere Merkmale * Gehausetyp: weies P-LCC-2-Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 560 nm (pure green) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 2 lm/W * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * Erweiterte Korrosionsfestigkeit: Details siehe Seite 9 Features * package: white P-LCC-2 package, colorless clear resin * feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 560 nm (pure green) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 2 lm/W * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D * Superior Corrosion Robustness: details see page 9 Anwendungen * Informationsanzeigen im Innen- und Auenbereich * optischer Indikator * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z. B. Instrumentenbeleuchtung) * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Einkopplung in Lichtleiter * Laufschriftanzeigen * Signal- und Symbolleuchten Applications * indoor and outdoor displays * optical indicators * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting, (e.g. dashboard backlighting) * marker lights (e.g. steps, exit ways, etc.) * coupling into light guides * light writing displays * signal and symbol luminaire 2012-03-16 1 LP T675 Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 15 Lichtstrom6) Seite 15 Bestellnummer Type Color of Emission Luminous Intensity1) page 15 Luminous Flux6) page 15 IF = 30 mA IV (mcd) IF = 30 mA V (mlm) LP T675-N1Q1-25 pure green 28.0 ... 90.0 180 (typ.) Ordering Code Q65110A9017 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LP T675-N1Q1-25 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen N1, N2, P1, P2 oder Q1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LP T675-N1Q1-25 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, -4 oder -5 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LP T675-N1Q1-25 means that only one group N1, N2, P1, P2 or Q1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LP T675-N1Q1-25 means that only 1 wavelength group -2, -3, -4 or -5 will be shippable (see page 5 for explanation). In order to ensure availability, single wavelength groups will not be orderable. 2012-03-16 2 LP T675 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TS=25C) IF 50 mA Stostrom Surge current t 10 s, D = 0.005, TS=25C IFM 500 mA Sperrspannung2) Seite 15 Reverse voltage2) page 15 (TS=25C) VR 12 V 2012-03-16 3 LP T675 Kennwerte Characteristics (TS = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 30 mA (typ.) Dominantwellenlange4) Seite 15 Dominant wavelength4) page 15 IF = 30 mA Symbol Symbol Wert Value Einheit Unit peak 562 nm dom 560* 6 nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 30 mA (typ.) 19 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 Grad deg. Durchlassspannung5) Seite 15 Forward voltage5) page 15 IF = 30 mA (min.) (typ.) (max.) VF VF VF 1.8 2.0 2.4 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 30 mA; -10C T 100C (typ.) TCpeak 0.11 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 30 mA; -10C T 100C (typ.) TCdom 0.10 nm/K Temperaturkoeffizient vonVF Temperature coefficient of VF IF = 30 mA; -10C T 100C (typ.) TCV - 2.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 30 mA (typ.) opt 2 lm/W (max.) Rth JA 400 K/W (max.) Rth JS 180 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung3) Seite 15 Junction/ambient3) page 15 Sperrschicht/Lotpad Junction/solder point * Einzelgruppen siehe Seite 5 Individual groups on page 5 **Rth(max) basiert auf statistischen Werten Rth(max) is based on statistic values 2012-03-16 4 LP T675 Wellenlangengruppen (Dominantwellenlange)4) Seite 15 Wavelength Groups (Dominant Wavelength)4) page 15 Gruppe Group pure green Einheit Unit min. max. 2 554 557 nm 3 557 560 nm 4 560 563 nm 5 563 566 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group N1 N2 P1 P2 Q1 Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) 28.0 ... 35.5 ... 45.0 ... 56.0 ... 71.0 ... 35.5 45.0 56.0 71.0 90.0 Lichtstrom6) Seite 15 Luminous Flux6) page 15 V (mlm) 95.0 (typ.) 120.0 (typ.) 150.0 (typ.) 190.0 (typ.) 240.0 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 5 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 5 brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: N2 Example: N2 Helligkeitsgruppe Brightness Group N2 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2012-03-16 5 LP T675 Relative spektrale Emission6) Seite 15 Relative Spectral Emission6) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TS = 25 C; IF = 30 mA OHL00477 100 % I rel 80 V 60 40 pure-green 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik6) Seite 15 Radiation Characteristic6) page 15 Irel = f (); TS= 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2012-03-16 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LP T675 Durchlassstrom6) Seite 15 Forward Current6) page 15 IF = f (VF); TS = 25 C Relative Lichtstarke6) 7) Seite 15 Relative Luminous Intensity6) 7) page 15 IV/IV(30 mA) = f (IF); TS = 25 C OHL00473 10 2 mA OHL00874 10 1 IV IF IV (30 mA) 10 1 10 0 10 0 10 -1 10 -1 10 -2 10 -3 1.4 1.6 1.8 2.0 2.2 10 -2 0 10 V 2.6 10 1 mA VF 10 2 IF 6) Seite 15 Relative Lichtstarke Relative Luminous Intensity6) page 15 IV / IV(25 C)= f (Tj); IF = 30 mA OHL00475 I V 3.0 I V (25 C) 2.5 2.0 1.5 pure-green 1.0 0.5 0 -40 -20 0 20 40 60 C 100 Tj 2012-03-16 7 LP T675 Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T A) IF OHL00176 60 mA S 50 40 A 30 20 10 0 A temp. ambient S temp. solder point 0 20 40 80 C 100 60 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C IF 0.6 A OHL02025 tP D= T 0.5 0.4 0.3 0.2 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C tP IF IF T D= 0.4 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 OHL02026 tP D= T 0.5 0.3 0.2 tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.1 0.1 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2012-03-16 0.6 A tp 8 LP T675 Mazeichnung8) Seite 15 Package Outlines8) page 15 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 1.7 (0.067) 0.1 (0.004) (typ.) 0.9 (0.035) 0.7 (0.028) 3.4 (0.134) 3.0 (0.118) (2.4) (0.095) 3.7 (0.146) 3.3 (0.130) 41 2.1 (0.083) A Cathode marking 0.5 (0.020) 1.1 (0.043) C 0.18 (0.007) 0.12 (0.005) 0.6 (0.024) 0.4 (0.016) GPLY6724 Korrosionsfestigkeit besser als EN 60068-2-60 (method 4): mit erweitertem Korrosionstest: 40C / 90%rh / 15ppm H2S / 336h Corrosion robustness better than EN 60068-2-60 (method 4): with enhanced corrosion test: 40C / 90%rh / 15ppm H2S / 336h Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 35 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) 2012-03-16 9 Cathode/Collector Marking 8 (0.315) 2 (0.079) 1.75 (0.069) 4 (0.157) 3.5 (0.138) 1.5 (0.059) 3.6 (0.142) Method of Taping / Polarity and Orientation8) page 15 OHAY2271 LP T675 Empfohlenes Lotpaddesign8) 9) Seite 15 Recommended Solder Pad8) 9) page 15 Reflow Loten Reflow Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 1.5 (0.059) 4.5 (0.177) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Lotstopplack Solder resist Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 OHLPY970 Empfohlenes Lotpaddesign verwendbar fur TOPLED und Power TOPLED Reflow Loten8) Seite 15 Recommended Solder Pad useable for TOPLED and Power TOPLED Reflow Soldering8) page 15 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist 2012-03-16 10 Cu Flache / <_ 16 mm 2 per pad Cu-area OHLPY440 LP T675 Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 Reflow Lotprofil fur bleifreies Loten Reflow Soldering Profile for lead free soldering (nach J-STD-020D.01) (acc. to J-STD-020D.01) OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 250 s 300 t Profile Feature Pb-Free (SnAgCu) Assembly Recommendation Max. Ratings Ramp-up Rate to Preheat*) 25C to 150C 2C / sec 3C / sec Time ts from TSmin to TSmax (150C to 200C 100s min. 60sec max. 120sec Ramp-up Rate to Peak*) 180C to TP 2C / sec 3C / sec Liquidus Temperture TL 217C Time tL above TL 80sec max. 100sec Peak Temperature TP 245C max. 260C Time tP within 5C of the specified peak temperature TP - 5K 20sec min. 10sec max. 30sec Ramp-down Rate* TP to 100C 3K / sec 6K / sec maximum Time 25C to Peak temperature max. 8 min. All temperatures refer to the center of the package, measured on the top of the component * slope calculation T/t: t max. 5 sec; fulfillment for the whole T-range 2012-03-16 11 LP T675 Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2012-03-16 12 LP T675 Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE . see lab e H) nk, (R bla cod y If bar . dit RH mi % hu e ve /60 ed ag C ati rar ck rel 30 _ inf pa < % to ak of 90 urs d ). < ns (pe or urs d , Ho de cte itio Ho urs an bje ing C co 72 nd Ho urs 5 te C su ss 48 e Ho co ce 24 6 da e y 40 be tim C h l pro < tor tim e e or ). 23 tim at t wilnt l wit or fac C Flo s tim at or ca at re. Flo d tha ale el or nth nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic 5a is be de tin en 24 de , or pro ve l 6 Le e te co , g: un wh Le ve l ke r se da ba ed low ure Le ve mo % ba e ba al d Le ist ure en ref e e 10 ure tim for se ist ale op se for > se , Mo ure 3 ist is or . , is ha se Mo be nk ist nk rd g -03 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. s wi 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. dy d e 4 8 ref y is req 2. JE bo e Mo ore tim 16 req : C/ es dit2b a) tim e e St or mi IP ed or g is tim vic b) e Hu en Flo oror tim De 2a kin nc te Flo op a) 3. b) baere Flo or da e l 1 2 Flo If al ref tim ve l 2a 4. se d ve l 3 Le g an ve l Le Ba te ure Le ve Le ist ure Da ist ure Mo ure Mo istist Mo Mo Barcode label N RS ins VE ITI TO nta NSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE MO TO OP M RA OS Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM OS R Desiccant OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label el M Y DE R 18 -1 -1 +Q P RO UP : G 4 01 4 98 C: 20 00 D/ 00 21 9 (9 D) 21 : H 12 34 O 5 14 2 11 00 NO : O D PR (X ) D EM Y 18 R -1 : Q + u L lt S iT Y O T6 P 7 L 6 M P -1 G R O U P: M RA OS 00 0 (9 D ) D /C :0 14 4 (G ) E Bi D Bi n1 Bi n2 : Pn3 : Q 1: -1 20 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R ditio 0 C R 07 PA 7 na RT l TE C KV XT AR Muster TY :2 )Q (Q A 21 00 21 99 8 o M n O d u p cto to rs :1 (X ) PR O D N O : (1 T) 11 00 LO T 14 2 N O 5 R 34 ic N O : O S em H 12 G 23 S BA TC H (Q )Q TY : S S em R ic AM o n O d u p ct to o H rs NO TC BA P) (6 T LO (1 T) < (6 P) 23 G e (G ) M u L lt S iT Y O T6 P 7 L 6 E D Muster L Nns IVEORS ai IT ntNS CT TIO DU U g coSE ON Ais baRE IC TU M CThIS SE NO :1 E V E L selab . , H) nk de co (R bla r If ba . ity id RH m hu 0% e e /6 d tiv C re ag la re fra ck 30 _ < in pa % k s of to 90 ea s ur d ). < ns or te (p d Ho ururs s , de g itio Ho an bjec co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da y 40 be oc tim e e C or th r pr ll tim ct ). O 23 oo r wi nt tim e at l wi fa r M O Fl oo tim s at at le C at e. ica PT l Fl th th va oo r ur O nt Fl oo be on es ui if: read w ed l 4 5 Fl la m ide eq lo g, oc ve l vic is in en de be 24 de or l 5a6 pr ve Le nt wh e te co , w, g: ve l Le ke r re ou se da ba ed flo Le ve tu re m % ba e ba al e Le r en re e ed re 10 ois stu ur e tim se fo al op se fo > , M oi r se st ur 3 is is ha se M oi st nk be k, oo . 03 rd g M oi in Fl an in RH g, r-p bla DM ba Ca po If bl th % kinr life is (if . ar ST f p. wi 10 ba to et Jel r th va Ye ar ks s m _ < cat m d, C ed 1 Ye ee ur iredi Sh te w, te at nt > 1 W Ho Af flody qu In no ire DE 1. e ou 4 8 re ed re qu JE 2. bo ity is M or tim e e 16 re C/ : es id 2b r a) St tim m IP ed oo r or g is tim e vic b) e r Hu Fl oo en tim De 2a kin nc te Fl oo r a) op 3. b) ba re Fl oo da e fe l 1 Fl If al re tim ve l 2 4. se d l 2a3 Le ve g an ve l e Le Ba te ur e Le ve Le Da oist stur e ur M oi st ture M oi M ois M Q : -1 M -2 2 L 0 Te 2a 22 m 3 24 0 p ST Ad 26 0 C R C R0 ditio 0 C R PA 77 na RT l TE CK VA XT R: Bi Bi n1 Bi n2 : Pn3 : 120 Barcode label Packing Sealing label Dimensions of transportation box in mm (inch) Breite / Width Lange / length Hohe / height 200 5 (7,874 0,1968) 200 5 (7,874 0,1968) 30 5 (1,1811 0,1968) 352 5 (13,858 0,1968) 352 5 (13,858 0,1968) 33 5 (1,3 0,1968) 2012-03-16 13 OHA02044 LP T675 Revision History: 2012-03-16 Previous Version: 2010-11-23 Page Subjects (major changes since last revision) Date of change 2, 5 ordering code changed 2009-03-16 1, 9 additional information 2009-12-18 13 package outlines updated 2010-10-04 11 OS-IN-2010-032 2010-10-04 all final datasheet created 2010-11-23 11 OS-IN-2012-005 2012-03-16 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 15 may only be used in life-support devices or systems11) page 15 with the express written approval of OSRAM OS. 2012-03-16 14 LP T675 Remarks: Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) Die dominante Wellenlange wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 0,5 nm und einer erweiterten Messunsicherheit von +/- 1 nm gemessen (gema GUM mit Erweiterungsfaktor k = 3). Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur red Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus nach CECC 00802 Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2012-03-16 15 Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) The dominant wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of +/- 0,5 nm and an expanded uncertainty of +/- 1 nm (acc. to GUM with a coverage factor of k=3). The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for red Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.