ATC 800 B Series
NPO Ceramic, High RF Power
Ultra-Low ESR
Multilayer Capacitors
Case B Size
(.110” x .110”)
Rugged, reliable
NPO dielectric
Case optimized for
highest self resonant
frequency
Capacitance Range
0.1 pF to 1000 pF
• Lowest ESR
Capable of highest
RF Power
RoHS Compliant / Lead-Free
ATC’s 800 B Series offers superb performance in demanding high RF
power applications requiring consistent and reliable operation. The
combination of highly conductive metal electrode systems, optimized
case geometries, and proprietary dielectrics, yields the lowest ESR.
ATC’s new NPO low loss rugged dielectrics are designed to provide
superior heat transfer in high RF power applications. Ultra-low ESR
and superior thermal performance insure that the 800 B Series prod-
ucts are your best choice for high RF power applications from VHF
through microwave frequencies.
Typical applications: VHF / UHF / HDTV Broadcast Transmitters, Wire-
less Communications, Public Safety Radio, Avionics, Telecom, WiMAX,
Microwave Communication Systems and Satellite Systems.
Typical circuit applications: High RF Power Filter Networks, Combiners,
Couplers, Matching Networks, Output Coupling, Antenna Coupling, and
DC Blocking and Bypassing.
ENVIRONMENTAL TESTS
ATC 800 B Series Capacitors are designed and manufactured to meet and
exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123.
THERMAL SHOCK:
MIL-STD-202, Method 107, Condition A
MOISTURE RESISTANCE:
MIL-STD-202, Method 106
LOW VOLTAGE HUMIDITY:
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
while subjected to an environment of 85°C with 85% relative
humidity for 240 hours min.
LIFE TEST:
MIL-STD-202, Method 108, for 2000 hours, at 125°C
200% WVDC applied
ELECTRICAL AND MECHANICAL
SPECIFICATIONS
QUALITY FACTOR (Q): . 2000 @ 1 MHz
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
0 ±30 PPM/°C (-55°C to +125°C)
INSULATION RESISTANCE (IR):
0.1 pF to 1000 pF:
105 Megohms min. @ +25°C at rated WVDC
104 Megohms min. @ +125°C at rated WVDC
WORKING VOLTAGE (WVDC):
See Capacitance Values Table, page 2
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
Case B: 250% of rated WVDC for 5 secs
RETRACE: Less than ±(0.02% or 0.02 pF), whichever is greater
AGING EFFECTS: None
PIEZOELECTRIC EFFECTS: None
(No capacitance variation with voltage or pressure)
CAPACITANCE DRIFT: ±(0.02% or 0.02 pF), whichever is greater
OPERATING TEMPERATURE RANGE:
From -55°C to +125°C (No derating of working voltage)
TERMINATION STYLES: RoHS Compliant and Solder Plate
See Mechanical Configurations, page 3
TERMINAL STRENGTH: Terminations for chips withstand a pull of
5 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular
to the termination surface of the capacitor. Test per MIL-STD-202,
method 211.
THE ENGINEERS’ CHOICE® www.atceramics.com
American Technical Ceramics
ATC # 001-1033 Rev. J, 1/18
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
sales@atceramics.com
ATC Asia
sales@atceramics-asia.com
ATC Europe
saleseur@atceramics.com
ATC 800 B Capacitance Values
VRMS = 0.707 X WVDC
• SPECIAL VALUES, TOLERANCES AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.
CAP. CAP. RATED CAP. CAP. RATED CAP. CAP. RATED CAP. CAP. RATED
CODE (pF) TOL. WVDC CODE (pF) TOL. WVDC CODE (pF) TOL. WVDC CODE (pF) TOL. WVDC
0R1 0.1 2R4 2.4 200 20 151 150
0R2 0.2 2R7 2.7 220 22 161 160
0R3 0.3 3R0 3.0 240 24 181 180
0R4 0.4 3R3 3.3 270 27 201 200
0R5 0.5 3R6 3.6 300 30 221 220
0R6 0.6 3R9 3.9 330 33 241 240
0R7 0.7 4R3 4.3 360 36 271 270
0R8 0.8 4R7 4.7 390 39 301 300
0R9 0.9 5R1 5.1 430 43 331 330
1R0 1.0 5R6 5.6 470 47 361 360
1R1 1.1 6R2 6.2 510 51 391 390
1R2 1.2 6R8 6.8 560 56 431 430
1R3 1.3 7R5 7.5 620 62 471 470
1R4 1.4 8R2 8.2 680 68 511 510
1R5 1.5 9R1 9.1 750 75 561 560
1R6 1.6 100 10 820 82 621 620
1R7 1.7 110 11 910 91 681 680
1R8 1.8 120 12 101 100 751 750
1R9 1.9 130 13 111 110 821 820
2R0 2.0 150 15 121 120 911 910
2R1 2.1 160 16 131 130 102 1000
2R2 2.2 180 18
B
B, C
B, C,
D
500
500
300
300
200
100
50
500
B, C,
D
B, C,
J, K,
M
F, G,
J, K,
M
F, G,
J, K,
M
F, G,
J, K,
M
ATC PART NUMBER CODE
ATC800 B 91 0 J T 500 X T
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits
of capacitance in picofarads except for decimal values.
Capacitance Tolerance
Laser Marking
WVDC
Termination Code
Packaging
T - Tape & Reel: 500 and 1000 pc. qty. std.*
TV - Vertical Orientation of Product,
Tape & Reel: 500 and 1000 pc. qty. std.*
I - Special Packaging. Consult Factory.
*Consult ATC for other quantities
The above part number refers to a 800 B Series (case size B) 91 pF capacitor,
J tolerance (±5%), 500 WVDC, with T termination (Tin Plated over Nickel Barrier Termination, RoHS Compliant), laser marking and tape and reel packaging.
For additional information and catalogs contact your ATC
representative or call direct at (+1-631) 622-4700.
Consult factory for additional performance data.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent,
i.e., part numbers referenced with the “ATC” prefix are interchangeable
to parts referenced without the “ATC” prefix. Customers are free to use
either in specifying or procuring parts from American Technical Ceramics.
CAPACITANCE TOLERANCE
Code B C D F G J K M
Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10% ±20%
2
ATC
TERM.
CODE
CASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
Inches (mm)
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIAL
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
T
B
Solder Plate
.110
+.020 -.010
(2.79
+0.51 -0.25)
.110 ±.015
(2.79 ±0.38)
.070 (1.78)
max.
.015 (0.38)
±.010 (0.25)
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
Tin/Lead Solder Plated over
Nickel Barrier Termination
LT
W
Y
ATC
SERIES
& CASE
SIZE
800B
W
B
Solderable
Nickel Barrier
.110
+.020 -.010
(2.79
+0.51 -0.25)
.110 ±.015
(2.79 ±0.38)
.070 (1.78)
max.
.015 (0.38)
±.010 (0.25)
LT
W
Y
800B
ATC 800 B Capacitors: Mechanical Configurations
ATC
TERM.
CODE
CASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
Inches (mm)
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIAL
LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
TN
.110
+.020 -.010
(2.79
+0.51 -0.25)
.110 ±.015
(2.79 ±0.38)
.070 (1.78)
max.
.015 (0.38)
±.010 (0.25)
RoHS Compliant
Tin Plated over
Non-Magnetic Barrier Termination
LT
W
Y
ATC
SERIES
& CASE
SIZE
800B
B
Non-Mag
Solderable
Barrier
ATC 800 B Capacitors: Non-Magnetic Mechanical Configurations
Suggested Mounting Pad Dimensions
3
Cap
Value.43) Pad Size A Min B Min C Min D Min
All
Values
Normal .090
(2.29)
.050
(1.27)
.075
(1.91)
.175
(4.45)
High
Density
.070
(1.78)
.030
(.762)
.075
(1.91)
.135
(3.43)
Cap
Value.43) Pad Size A Min B Min C Min D Min
All
Values
Normal .130
(3.30)
.050
(1.27)
.075
(1.91)
.175
(4.45)
High
Density
.110
(2.79)
.030
(.762)
.075
(1.91)
.135
(3.43)
Case B Vertical Mount
Case B Horizontal Mount
inches (mm)
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
sales@atceramics.com
ATC Asia
sales@atceramics-asia.com
ATC Europe
saleseur@atceramics.com
ATC 800 B Series Data Sheet Test Condition Description
Capacitors vertically mounted in series microstrip conguration on 23.3-mil thick Rogers RO4350® softboard, 52-mils wide 1/2 oz. Cu traces.
FSR = lowest frequency at which S11 response, referenced at capacitor edge, crosses real axis on Smith Chart.
FPR = lowest frequency at which there is a notch in S21 magnitude response.
ATC 800 B Performance Data
0.1
1.0
10.0
100.0
0001001011
Fpr
Fsr
800 B FSR & FPR vs. Capacitance
Capacitance (pF)
Frequency (GHz)
0.01
0.10
1.00
000010001001
Frequency (MHz)
ESR (Ohms)
(Typical)
800 B ESR vs. Frequency
1.0 pF
3.3 pF
10 pF
39 pF
100 pF
200 pF
1000 pF
4
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
sales@atceramics.com
ATC Asia
sales@atceramics-asia.com
ATC Europe
saleseur@atceramics.com
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document #001-992). Copies of these terms
and conditions will be provided upon request. They may also be viewed on ATC’s website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which
may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2006 American Technical Ceramics Corp. All Rights Reserved. ATC # 001-1033 Rev.J, 1/18
5
Temperature (Degrees C)
% Change in Capacitance
800B Capacitance Change vs. Temperature
TCC= 0 ±30 PPM/C
1
-1
-0.8
-0.6
-0.4
-0.2
0
0.2
0.4
0.6
0.8
-55 -35 -15 5 25 45 65 85 105 125
ATC 800 B Performance Data
AMERICAN TECHNICAL CERAMICS
www.atceramics.com
ATC North America
sales@atceramics.com
ATC Asia
sales@atceramics-asia.com
ATC Europe
saleseur@atceramics.com