54F02,74F02 Quad 2-Input NOR Gate Literature Number: SNOS145A General Description Ordering Code: See Section 0 Commercial Military Package Number 74F02PC N14A 54F02DM (Note 2) J14A 74F02SC (Note 1) M14A 74F02SJ (Note 1) M14D W14B 54F02LM (Note 2) E20A Package Description 14-Lead (0.300" Wide) Molded Dual-In-Line 14-Lead Ceramic Dual-In-Line 14-Lead (0.150" Wide) Molded Small Outline, JEDEC DSXXX 14-Lead (0.300" Wide) Molded Small Outline, EIAJ 14-Lead Cerpack ol e 54F02FM (Note 2) te This device contains four independent gates, each of which performs the logic NOR function. 54F/74F02 54F/74F02 Quad 2-Input NOR Gate 54F/74F02 Quad 2-Input NOR Gate December 1994 20-Lead Ceramic Leadless Chip Carrier, Type C Note 1: Devices also available in 13" reel. Use suffix = SCX and SJX. Note 2: Military grade device with environmental and burn-in processing. Use suffix = DMQB, FMQB and LMQB. Logic Symbol Connection Diagrams Pin Assignment for DIP, SOIC and Flatpak bs IEEE/IEC DS009455-3 DS009455-2 O Pin Assignment for LCC DS009455-1 TRI-STATE (R) is a registered trademark of National Semiconductor Corporation. (c) 1997 National Semiconductor Corporation www.national.com DS009455 PrintDate=1997/09/03 PrintTime=06:50:37 11240 ds009455 Rev. No. 1 cmserv Proof 1 1 Unit Loading/Fan Out See Section 0 for U.L. definitions DSXXX 54F/74F Pin Names Description U.L. Input IIH/IIL HIGH/LOW Output IOH/IOL Inputs 1.0/1.0 20 A/-0.6 mA Outputs 50/33.3 -1 mA/20 mA O bs ol e te An, Bn On www.national.com 2 PrintDate=1997/09/03 PrintTime=06:50:37 11240 ds009455 Rev. No. 1 cmserv Proof 2 Current Applied to Output in LOW State (Max) (Note 3) Storage Temperature Ambient Temperature under Bias Junction Temperature under Bias Plastic VCC Pin Potential to Ground Pin Input Voltage (Note 4) Input Current (Note 4) Voltage Applied to Output in HIGH State (with VCC = 0V) Standard Output TRI-STATE (R) Output -65C -55C -55C -55C to to to to Recommended Operating Conditions +150C +125C +175C +150C Free Air Ambient Temperature Military Commercial Supply Voltage Military Commercial -0.5V to +7.0V -0.5V to +7.0V -30 mA to +5.0 mA 54F/74F Min VIH Input HIGH Voltage VIL Input LOW Voltage VCD Input Clamp Diode Voltage VOH Output HIGH 54F 10% VCC 2.5 Voltage 74F 10% VCC 2.5 74F 5% VCC 2.7 IBVI ICEX VID 2.0 Units VCC V Recognized as a HIGH Signal 0.8 V -1.2 V Min Recognized as a LOW Signal IIN = -18 mA V Min V Min IOH = -1 mA IOH = -1 mA IOH = -1 mA IOL = 20 mA A Max IOL = 20 mA VIN = 2.7V A Max VIN = 7.0V A Max VOUT = VCC V 0.0 IID = 1.9 A Output LOW 54F 10% VCC 0.5 Voltage 74F 10% VCC 0.5 Input HIGH 54F 20.0 Current 74F 5.0 Input HIGH Current 54F 100 Breakdown Test 74F 7.0 Output HIGH 54F 250 Leakage Current 74F 50 Input Leakage 74F 4.75 Test IOD Output Leakage Conditions Max ol e IIH Typ bs VOL +4.5V to +5.5V +4.5V to +5.5V Note 4: Either voltage limit or current limit is sufficient to protect inputs. -0.5V to VCC -0.5V to +5.5V Parameter -55C to +125C 0C to +70C Note 3: Absolute maximum ratings are values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. DC Electrical Characteristics Symbol twice the rated IOL (mA) te Absolute Maximum Ratings If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. 74F 3.75 A 0.0 All other pins grounded VIOD = 150 mV -0.6 mA Max All other pins grounded VIN = 0.5V O Circuit Current IIL Input LOW Current IOS Output Short-Circuit Current -150 mA Max ICCH Power Supply Current 3.7 5.6 mA Max ICCL Power Supply Current 8.7 13.0 mA Max -60 3 PrintDate=1997/09/03 PrintTime=06:50:39 11240 ds009455 Rev. No. 1 VOUT = 0V VO = HIGH VO = LOW www.national.com cmserv Proof 3 AC Electrical Characteristics See Section 0 for Waveforms and Load Configurations Symbol DSXXX 74F TA = +25C VCC = +5.0V Parameter 54F TA, VCC = Mil CL = 50 pF 74F TA, VCC = Com CL = 50 pF Fig. Units No. CL = 50 pF Typ Max Min Max Min Propagation Delay 2.5 4.4 5.5 2.5 7.5 2.5 Max 6.5 tPHL An, Bn to On 1.5 3.2 4.3 1.5 6.5 1.5 5.3 ns kk-kk DSXXX Book Extract End O bs ol e te Min tPLH www.national.com 4 PrintDate=1997/09/03 PrintTime=06:50:40 11240 ds009455 Rev. No. 1 cmserv Proof 4 Book Extract End Ordering Information te The device number is used to form part of a simplified purchasing code where the package type and temperature range are defined as follows: DS009455-4 inches (millimeters) unless otherwise noted O bs ol e Physical Dimensions 20-Lead Ceramic Leadless Chip Carrier (L) NS Package Number E20A 5 PrintDate=1997/09/03 PrintTime=06:50:40 11240 ds009455 Rev. No. 1 www.national.com cmserv Proof 5 inches (millimeters) unless otherwise noted (Continued) ol e te Physical Dimensions O bs 14-Lead Ceramic Dual In-Line Package (D) NS Package Number J14A 14-Lead (0.150" Wide) Molded Small Outline Package, JEDEC (S) NS Package Number M14A www.national.com 6 PrintDate=1997/09/03 PrintTime=06:50:41 11240 ds009455 Rev. No. 1 cmserv Proof 6 inches (millimeters) unless otherwise noted (Continued) ol e te Physical Dimensions O bs 14-Lead (0.300" Wide) Molded Small Outline Package, EIAJ (SJ) NS Package Number M14D 14-Lead (0.300" Wide) Molded Dual-In-Line Package (P) NS Package Number N14A 7 PrintDate=1997/09/03 PrintTime=06:50:41 11240 ds009455 Rev. No. 1 www.national.com cmserv Proof 7 te inches (millimeters) unless otherwise noted (Continued) ol e 54F/74F02 Quad 2-Input NOR Gate Physical Dimensions bs 14-Lead Ceramic Flatpak (F) NS Package Number W14B O LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or sysdevice or system whose failure to perform can be reatems which, (a) are intended for surgical implant into sonably expected to cause the failure of the life support the body, or (b) support or sustain life, and whose faildevice or system, or to affect its safety or effectiveness. ure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com 8 National Semiconductor Europe Fax: +49 (0) 1 80-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 1 80-530 85 85 English Tel: +49 (0) 1 80-532 78 32 Francais Tel: +49 (0) 1 80-532 93 58 Italiano Tel: +49 (0) 1 80-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-3-5620-6175 Fax: 81-3-5620-6179 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. PrintDate=1997/09/03 PrintTime=06:50:41 11240 ds009455 Rev. No. 1 cmserv Proof 8 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated