SMD Multilayer Chip Power Inductor ASMPH-0603 Pb FEATURES: * High DC bias current due to trench technology * Much lower profile than any other series * Monolithic structure for high reliability * Excellent solderability and heat resistance * Magnetically shielded structure to eliminate cross coupling RoHS/RoHS II Compliant 1.6 x 0.8 x 0.8mm APPLICATIONS: ASMPH family is a miniature type of multilayer power inductors constructed using low loss ferite material to support high-speed switching frequencies.The compact size and high efficiency is ideal for DC/DC converter applications in space limited boards. Switching mode regulators for smart phones and cameras. Buck convertersfor RFIC, RFPA and Audio Codec modules. Boost converters for flash drivers. Wireless cards, DVD players and other electronic devices. ELECTRICAL SPECIFICATIONS: Operating Temperature: -40C to +85C ELECTRICAL SPECIFICATIONS: Storage Temperature: -10C to +40C, RH 70% (Max.) Part Number ASMPH-0603Inductance Code Units MHz Temperature Rise Current (max) mA Saturation Current (Typ) mA DCR SRF Irms Isat 0.10 0.13 0.15 0.18 0.20 0.23 0.30 200 190 180 160 125 100 80 1250 1200 1100 1150 1000 900 850 1600 1500 1200 1100 800 500 300 Inductance Tolerance DCR SRF Min. H % M=20% N=30% M, N M, N M, N M, N M, N M, N M, N 25% Symbol L ASMPH-0603-R22 ASMPH-0603-R33 ASMPH-0603-R47 ASMPH-0603-R68 ASMPH-0603-1R0 ASMPH-0603-1R5 ASMPH-0603-2R2 0.22 0.33 0.47 0.68 1.0 1.5 2.2 Unless otherwise specified, the standard atmospheric conditions for measurement/test as: a. Ambient Temperature: 2015C b. Relative Humidity: 6520% c. Air Pressure: 86 kPa to 106 kPa Inductance (L): HP4291B+HP16192A or Equivalent, tested at 1MHz, -20dBm or 50mV. Direct Current Resistance (DCR): Milliohmeter-HP4338B or Equivalent Self-Resonant Frequency (SRF): HP4291B+HP16192A or Equivalent, -20dBm or 50mV. Temperature Rise current (Irms): Electric Power, Electric current meter, Thermometer. Irms is the value of DC current as chip surface temperature rose just 40C against chip initial surface temperature. Saturation Current(Isat): HP6632B system DC power supply, HP4291B+HP16192A+HP16200 or equivalent. Isat is the value of DC current inductance decreased just 30% against initial value. ABRACON IS ABRACON IS ISO 9001:2008 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.11.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD Multilayer Chip Power Inductor ASMPH-0603 RoHS/RoHS II Compliant Pb 1.6 x 0.8 x 0.8mm PART IDENTIFICATIONS: ASMPH-0603Inductance Code Please refer to the table above Tolerance M=20% N=30% Packaging T: Tape and Reel (4kpcs / reel) OUTLINE DRAWING: Recommended Land Pattern L W T a 1.600.15 0.80.15 0.80.15 0.30.2 A B C 0.60~0.80 0.60~0.80 0.60~0.80 Dimension: mm MATERIALS: Side View Top View 1 ABRACON IS ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED CERTIFIED 2 3 4 1 2 3 Part Name Base Material Internal Conductor Pull out Electrode 4 Terminal Electrode Material Ferrite Ag Ag Ag (Inner layer) Ni-Sn (Outer layer) Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.11.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com SMD Multilayer Chip Power Inductor ASMPH-0603 Pb RoHS/RoHS II Compliant 1.6 x 0.8 x 0.8mm REFLOW PROFILE: Preheat Condition Allowed time above 217 C Max temperature Max time at max temperature Solder paste Allowed Reflow time 150 to 200 C; 60 to 120 sec. 60 to 90 sec. 260 C 10 sec. Sn/3.0Ag/0.5Cu 2x max. TAPE & REEL: Packing T: 4,000pcs / reel 4.3 0.2 mm A B P T (max) 1.00.2 1.80.2 4.00.1 1.1 8.4+1.5/ -0.0mm 2.45 0.2 mm 4.0 0.1 mm 5.0 0.1 mm 58 2.0 mm 13. 50 .2 mm 3.0 0.1 mm max 14.4mm 178 2.0 mm Dimension: mm ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ABRACON IS 9001:2008 ISOISO 9001 / QS 9000 CERTIFIED CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 02.11.13 30332 Esperanza, Rancho Santa Margarita, California 9268 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABRACON: ASMPH-0603-R33M-T ASMPH-0603-1R0M-T ASMPH-0603-R68M-T ASMPH-0603-2R2M-T ASMPH-0603-1R5M-T ASMPH-0603-R47M-T ASMPH-0603-R22M-T