42
%
%
TMC Series
Established Reliability TACmicrochip™
CASE DIMENSIONS: millimeters (inches)
Minimum
Code EIA EIA Length (L) Width (W) Height (H) Termination Typical Mass
Code Metric Length (Lt)
K0402 1005-05 1.00 0.50 0.50 0.10 (0.004) 2.0mg
(0.039 ) (0.020 ) (0.020 )
L0603 1608-08 1.60 0.85 0.85 0.15 (0.006) 8.6mg
(0.063 ) (0.033 ) (0.033 )
R0805 2012-12 2.00 1.35 1.35 0.15 (0.006) 29.9mg
(0.079 ) (0.053 ) (0.053 )
A1206 3216-16 3.20±0.20 1.60 1.60 0.15 (0.006) 44.6mg
(0.126±0.008) (0.063 ) (0.063 )
L
SLt W
H
POLARITY BAND NOT TO
EXCEED CENTER LINE
+0.20
-0.00 +0.20
-0.00 +0.20
-0.00
+0.008
-0.000
+0.25
-0.15
+0.010
-0.006
+0.25
-0.15
+0.010
-0.006
+0.20
-0.10
+0.008
-0.004
+0.20
-0.10
+0.008
-0.004
+0.20
-0.10
+0.008
-0.004
+0.00
-0.20
+0.000
-0.008
+0.00
-0.20
+0.000
-0.008
+0.008
-0.000 +0.008
-0.000
+0.20
-0.00
+0.008
-0.004
• Weibull graded
• Reliability 0.1% / K hrs
• Low leakage
• Conformance testing
(Lot by Lot)
• Extended traceability
• Approved for use in life
support medical devices
KEY FEATURES
TMC
Type
TACmicrochip™
R
Case Code
0402=K
0603=L
0805=R
1206=A
106
Capacitance Code
pF code: 1st two digits
represent significant figures,
3rd digit represents multiplier
(number of zeros to follow)
M
Tolerance
K=±10%
M=±20%
010
Rated DC Voltage
002=2Vdc
003=3Vdc
004=4Vdc
006=6.3Vdc
010=10Vdc
016=16Vdc
020=20Vdc
**
Additional
characters may
be add for special
requirements
HOW TO ORDER E
Packaging
E = Non Modular
Tin Termination
D = Non Modular
Gold Termination
(see table below)
Standard Standard
Reel Tin Termination Tin Termination Gold Termination
Size Plastic Tape Paper Tape Plastic Tape
1206/0805/0603 0402 1206/0805/0603
7" Rxx Pxx Axx
41⁄4"Xxx Qxx Fxx
Packaging Suffix
RTA – Std. termination (Nickel & T in) supplied on
plastic embossed tape on a 4mm pitch in a
7" diameter reel.
XTA – Std. termination (Nickel & Tin) supplied
on plastic embossed tape on a 4mm pitch in a
4.25" diameter reel.
PTA – Std. termination (Nickel & Tin) supplied
on punched paper tape on a 2mm pitch in a
7" diameter reel.
QTA – Std. termination (Nickel & Tin) supplied
on punched paper tape on a 2mm pitch in a
4.25" diameter reel.
ATA – Nickel & thin Gold plated termination,
supplied on plastic embossed tape on a
4mm pitch in a 7" diameter reel.
FTA – Nickel & thin Gold plated termination,
supplied on plastic embossed tape on a
4mm pitch in a 4.25" diameter reel.
Packaging Suffix
Technical Data: All technical data relate to an ambient temperature of +25°C
Capacitance Range: 0.47µF to 68µF
Capacitance Tolerance: ±10%; ±20%
Leakage Current DCL: 0.005CV or 0.2µA whichever is the greater
Rated Voltage (VR)+85°C: 3 4 6.3 10 16 20
Category Voltage (VC)+125°C: 2 2.7 4 7 10 13
Surge Voltage (VS)+85°C: 3.9 5.2 8 13 20 26
Surge Voltage (VS)+125°C: 2.6 3.2 5 8 12 16
Temperature Range: -55°C to +125°C
Reliability: HRC5000, Weibull B grade, 0.1% per 1,000 hours
Termination Finish: Nickel and Tin Plating (standard),
Nickel and Gold Plating option available upon request
TECHNICAL SPECIFICATIONS
43
Capacitance Voltage Rating DC (VR) at 85°C
Cap. (µF) Code 2.0V 3.0V 4.0V 6.3V 10V 16V 20V
0.33 334
0.47 474 K/L L
0.68 684 K/L L
1.0 105 KK/L L
1.5 155 L
2.2 225 KLL
3.3 335 L/R
4.7 475 L L/R R
6.8 685 R R
10 106 R R R R
15 156 R R R
22 226 R RA
33 336 R R
47 476 A
68 686 A
100 107
150 157 TAK
220 227
TMC Series
Established Reliability TACmicrochip™
ESTABLISHED RELIABILITY RANGE (EIA Sizes) (LETTER DENOTES CASE SIZE)
Developmental Ratings - subject to change
