TMC Series Established Reliability TACmicrochipTM KEY FEATURES * * * * Weibull graded Reliability 0.1% / K hrs Low leakage Conformance testing (Lot by Lot) * Extended traceability * Approved for use in life support medical devices CASE DIMENSIONS: millimeters (inches) L Code EIA Code EIA Metric +0.20 %K 0402 1005-05 L 0603 1608-08 POLARITY BAND NOT TO EXCEED CENTER LINE S Lt 1.00 -0.00 +0.008 (0.039 -0.000 ) +0.25 % H Length (L) R 0805 2012-12 A 1206 3216-16 W Width (W) +0.20 0.50 -0.00 +0.008 (0.020 -0.000 ) +0.20 Height (H) Typical Mass 0.10 (0.004) 2.0mg 0.15 (0.006) 8.6mg 0.15 (0.006) 29.9mg 0.15 (0.006) 44.6mg +0.20 0.50 -0.00 +0.008 (0.020 -0.000 ) +0.20 1.60 -0.15 0.85 -0.10 0.85 -0.00 +0.010 (0.063 -0.006 ) +0.25 2.00 -0.15 +0.010 (0.079 -0.006 ) +0.008 (0.033 -0.004 ) +0.20 1.35 -0.10 +0.008 (0.053 -0.004 ) +0.00 1.60 -0.20 +0.000 (0.063 -0.008 ) +0.008 (0.033 -0.004 ) +0.20 1.35 -0.10 +0.008 (0.053 -0.004 ) +0.00 1.60 -0.20 +0.000 (0.063 -0.008 ) 3.200.20 (0.1260.008) Minimum Termination Length (Lt) HOW TO ORDER TMC R 106 M 010 E ** Type TACmicrochipTM Case Code 0402=K 0603=L 0805=R 1206=A Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance K=10% M=20% Rated DC Voltage 002=2Vdc 003=3Vdc 004=4Vdc 006=6.3Vdc 010=10Vdc 016=16Vdc 020=20Vdc Packaging E = Non Modular Tin Termination D = Non Modular Gold Termination (see table below) Additional characters may be add for special requirements Packaging Suffix RTA - Std. termination (Nickel & Tin) supplied on plastic embossed tape on a 4mm pitch in a 7" diameter reel. XTA - Std. termination (Nickel & Tin) supplied on plastic embossed tape on a 4mm pitch in a 4.25" diameter reel. PTA - Std. termination (Nickel & Tin) supplied on punched paper tape on a 2mm pitch in a 7" diameter reel. QTA - Std. termination (Nickel & Tin) supplied on punched paper tape on a 2mm pitch in a 4.25" diameter reel. ATA - Nickel & thin Gold plated termination, supplied on plastic embossed tape on a 4mm pitch in a 7" diameter reel. FTA - Nickel & thin Gold plated termination, supplied on plastic embossed tape on a 4mm pitch in a 4.25" diameter reel. Packaging Suffix Standard Standard Reel Tin Termination Tin Termination Gold Termination Size Plastic Tape Paper Tape Plastic Tape 1206/0805/0603 0402 1206/0805/0603 7" Rxx Pxx Axx Xxx Qxx Fxx 414" TECHNICAL SPECIFICATIONS Technical Data: Capacitance Range: Capacitance Tolerance: Leakage Current DCL: Rated Voltage (VR) Category Voltage (VC) Surge Voltage (VS) Surge Voltage (VS) Temperature Range: Reliability: Termination Finish: 42 +85C: +125C: +85C: +125C: All technical data relate to an ambient temperature of +25C 0.47F to 68F 10%; 20% 0.005CV or 0.2A whichever is the greater 3 4 6.3 10 16 20 2 2.7 4 7 10 13 3.9 5.2 8 13 20 26 2.6 3.2 5 8 12 16 -55C to +125C HRC5000, Weibull B grade, 0.1% per 1,000 hours Nickel and Tin Plating (standard), Nickel and Gold Plating option available upon request TMC Series Established Reliability TACmicrochipTM ESTABLISHED RELIABILITY RANGE (EIA Sizes) Capacitance Cap. (F) Code 0.33 334 0.47 474 0.68 684 1.0 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 150 157 220 227 2.0V (LETTER DENOTES CASE SIZE) Voltage Rating DC (VR) at 85C 3.0V 4.0V 6.3V K K R R R R R R L R R R 10V 16V K/L K/L K/L L L L/R L/R R R R A L L L 20V L R R A A TAK Developmental Ratings - subject to change 43