To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.com April 1st, 2010 Renesas Electronics Corporation Issued by: Renesas Electronics Corporation (http://www.renesas.com) Send any inquiries to http://www.renesas.com/inquiry. Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": 8. 9. 10. 11. 12. Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anticrime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majorityowned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. DATA SHEET BIPOLAR ANALOG INTEGRATED CIRCUIT PC3220GR LOW DISTORTION DOWN-CONVERTER IC FOR DIGITAL CATV DESCRIPTION The PC3220GR is a silicon monolithic IC designed for use as IF down-converter for digital CATV. This IC consists of AGC amplifier, mixer and video amplifier. The package is 16-pin SSOP (Shrink Small Outline Package) suitable for surface mount. This IC is manufactured using our 10 GHz fT NESAT II AL silicon bipolar process. This process uses silicon nitride passivation film. This material can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformly and reliability. FEATURES * Low distortion IIP3 = +1.0 dBm TYP. * Wide AGC dynamic range GCRtotal = 45.5 dB TYP. * On chip video amplifier * Supply voltage : 5 V * Packaged in 16-pin SSOP suitable for high-density surface mounting APPLICATION * Digital CATV receivers ORDERING INFORMATION Part Number Order Number PC3220GR-E1 PC3220GR-E1-A Package Marking C3220 16-pin plastic SSOP (5.72 mm (225)) (Pb-Free) Note Supplying Form * Embossed tape 12 mm wide * Pin 1 indicates pull-out direction of tape * Qty 2.5 kpcs/reel Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PC3220GR Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PU10165EJ05V0DS (5th edition) Date Published January 2005 CP(K) Printed in Japan The mark shows major revised points. NEC Compound Semiconductor Devices, Ltd. 2002, 2005 PC3220GR INTERNAL BLOCK DIAGRAM AND PIN CONFIGURATION (Top View) AGC Amp. Mixer 16 MIX OUT2 2 15 MIX OUT1 VAGC 3 14 GND GND 4 13 AMP IN1 OSC IN1 5 12 AMP IN2 OSC IN2 6 11 GND RF IN1 1 RF IN2 OSC OUT Buffer Amp. Video Amp. 2 VCC1 7 10 AMP OUT1 VCC2 8 9 AMP OUT2 Data Sheet PU10165EJ05V0DS PC3220GR PIN EXPLANATIONS PIN No. 1 Pin Symbol Explanation Voltage Equivalent Circuit (V, TYP.) RF IN1 1.46 7 Input pin of IF signal. 1-pin is same phase and 2-pin is opposite phase at balance input. In case of single input, 1-pin or 2-pin should be grounded through capacitor (example 10 nF). 2 RF IN2 1.46 AGC Control 1 3 VAGC 0 to 3.5 Automatic gain control pin. 2 7 This pins bias govern the AGC output level. 3 Minimum gain at VAGC = 0 V AGC Control Maximum gain at VAGC = 3.5 V 4 GND 0.0 Ground pin. Must be connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. 5 OSC IN1 2.6 7 Input pin of Oscillator signal. 5-pin is same phase and 6-pin is opposite phase at balance input. In case of single input, 5-pin or 6-pin should be grounded through capacitor (ex. 10 nF). 6 OSC IN2 2.6 5 7 VCC1 5.0 6 Power supply pin of IF down convertor block. Must be connected bypass capacitor to minimize ground impedance. 8 VCC2 5.0 Power supply pin of video amplifier. Must be connected bypass capacitor to minimize ground impedance. Data Sheet PU10165EJ05V0DS 3 PC3220GR PIN No. 9 Pin Symbol Explanation Voltage Equivalent Circuit (V, TYP.) AMP 2.5 8 Output pin of video amplifier. OUT1 and IN1 are same phase. OUT2 OUT2 and IN2 are same phase. 9 10 AMP 2.5 10 OUT1 11 GND 0.0 Ground pin. Must be connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. 12 AMP IN2 1.45 8 Signal input pin of video amplifier. This pin is high impedance. 13 AMP IN1 1.45 12 14 GND 0.0 13 Ground pin. Must be connected to the system ground with minimum inductance. Ground pattern on the board should be formed as wide as possible. 15 MIX OUT1 3.7 Output pin of mixer. 7 This output pin features low-impedance because of its emitter-follower output port. 15 16 MIX OUT2 3.7 16 4 Data Sheet PU10165EJ05V0DS PC3220GR ABSOLUTE MAXIMUM RATINGS Parameter Symbol Conditions Ratings Unit 6.0 V 433 mW Supply Voltage VCC TA = +25C Power Dissipation PD TA = +85C Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -55 to +150 C Note Note Mounted on double-sided copper-clad 50 x 50 x 1.6 mm epoxy glass PWB RECOMMENDED OPERATING RENGE Parameter Symbol Supply Voltage VCC Operating Ambient Temperature TA Gain Control Voltage Range Conditions VCC = 4.5 to 5.5 V VAGC Data Sheet PU10165EJ05V0DS MIN. TYP. MAX. Unit 4.5 5.0 5.5 V -40 +25 +85 C 0 - VCC V 5 PC3220GR ELECTRICAL CHARACTERISTICS (TA = +25C, VCC = 5 V) Parameter Symbol Test Conditions MIN. TYP. MAX. Unit 33.0 42.0 53.5 mA DC Characteristics Circuit Current 1 ICC1 No input signal, VCC1 = VCC2 = 5 V (Total Block) Note 4 Circuit Current 2 ICC2 No input signal, VCC1 = 5 V Note 4 15.0 20.0 25.5 mA ICC3 No input signal, VCC2 = 5 V Note 4 18.0 22.0 28.0 mA (AGC Amplifier Block + Mixer Block) Circuit Current 3 (Video Amplifier Block) AGC Voltage High Level VAGC (H) @ Maximum gain Note 1 3.0 - VCC V AGC Voltage Low Level VAGC (L) @ Minimum gain Note 1 0 - 0.5 V RF Characteristics (AGC Amplifier Block + Mixer Block: fRF = 84 MHz, fLO = 134 MHz, PLO = -15 dBm, fIF = 50 MHz, ZS = 50 , ZL = 1 k) RF Input Frequency Range fRF fIF = 50 MHz constant Note 1 30 - 250 MHz IF Output Frequency Range fIF fRF = 84 MHz constant Note 1 0.1 - 150 MHz Maximum Conversion Gain CGMAX VAGC = 3.0 V, Pin = -50 dBm Note 1 30.5 33.0 35.5 dB Minimum Conversion Gain CGMIN VAGC = 0.5 V, Pin = -20 dBm Note 1 -18.0 -12.5 -3.5 dB Note 1 36.0 45.5 - dB - 7.0 8.5 dB 24.0 26.5 - dBc AGC Dynamic Range GCRAGC VAGC = 0.5 to 3.0 V Noise Figure NF DSB, VAGC = 3.0 V (@ Maximum gain) Note 2 3rd Order Intermodulaion Distortion IM3 Vout = 0.236 Vp-p x 2 tone, (single-ended output), Pin -30 dBm/tone fRF1 = 84 MHz, fRF2 = 85 MHz Note 1 RF Characteristics (Video Amplifier Block: f = 50 MHz, ZS = 50 , ZL = 1 k) Gdiff Pin = -55 dBm Note 3 48.0 50.5 53.5 dB Voclip2 Pin = -25 dBm Note 3 2.95 3.70 - Vp-p Differential Gain Maximum Output Voltage 2 Notes 1. By measurement circuit 1 2. By measurement circuit 2 3. By measurement circuit 4 4. By measurement circuit 6 6 Data Sheet PU10165EJ05V0DS PC3220GR STANDARD CHARACTERISTICS (TA = +25C, VCC = 5 V, ZS = 50 ) Parameter Symbol Test Conditions Reference Value Unit AGC Amplifier Block + Mixer Block (fRF = 84 MHz, fLO = 134 MHz, PLO = -15 dBm, fIF = 50 MHz, ZS = 50 , ZL = 1 k) Input 3rd Order Distortion IIP3 Intercept Point VAGC = 0.5 V (@ Minimum gain) fRF1 = 84 MHz, fRF2 = 85 MHz Note 1 +1.0 dBm Maximum Output Voltage1 Voclip1 VAGC = 3.0 V, Pin = -20 dBm Note 1 0.65 Vp-p RF IN Impedance ZRFin VAGC = 3.0 V, f = 84 MHz Note 2 440 - j1100 OSC IN Impedance ZOSCin VAGC = 3.0 V, f = 134 MHz Note 2 280 - j810 MIXER OUT Impedance ZMIXout VAGC = 3.0 V, f = 50 MHz Note 2 30.2 + j2.5 60 MHz Video Amplifier Block (f = 50 MHz, ZS = 50 , ZL = 1 k) Frequency Range fBW Pin = -55 dBm, G (f = 10 MHz) -1 dB Note 3 Input Impedance ZAMPin f = 50 MHz Note 4 330 - j480 Output Impedance ZAMPout f = 50 MHz Note 4 21.9 + j22.6 55.0 dBc 3rd Order Intermodulaion Distortion IM3 Vout = 0.7 Vp-p x 2 tone, fin1 = 49 MHz, fin2 = 50 MHz Note 3 Total Block (fRF = 84 MHz, fLO = 134 MHz, PLO = -15 dBm, fIF = 50 MHz, ZS = 50 , ZL = 1 k) Maximum Conversion Gain CGMAX VAGC = 3.0 V, Pin = -70 dBm Note 5 67.5 dB Minimum Conversion Gain CGMIN VAGC = 0.5 V, Pin = -40 dBm Note 5 22.0 dB Total Dynamic Range GCR VAGC = 0.5 to 3.0 V Note 5 45.5 dB DSB, VAGC = 3.0 V (@ Maximum gain) 7.0 dB 3.7 Vp-p +1.0 dBm 51.0 dBc Noise Figure NF Note 6 Maximum Output Voltage Voclip VAGC = 3.0 V (@ Minimum gain) Note 5 Input 3rd Order Distortion IIP3total 3rd Order Intermodulaion Distortion VAGC = 0.5 V (@ Minimum gain) fRF1 = 84 MHz, fRF2 = 85 MHz Intercept Point IM3total Note 5 Vout = 0.7 Vp-p x 2 tone, Pin -40 dBm/tone fRF1 = 84 MHz, fRF2 = 85 MHz Note 5 Notes 1. By measurement circuit 1 2. By measurement circuit 3 3. By measurement circuit 4 4. By measurement circuit 5 5. By measurement circuit 6 6. By measurement circuit 7 Data Sheet PU10165EJ05V0DS 7 PC3220GR MEASUREMENT CIRCUIT 1 0.1 F RF1 RF2 50 AGC Amp. 1 50 Mixer 16 1 F 1 k 0.1 F//20 pF 2 15 3 14 1 F 1 k 1 F VAGC 0.1 F OSC OUT Buffer Amp. 4 Note LO Spectrum Analyzer IF 50 51 13 12 5 0.1 F 50 11 6 0.1 F 1 F VCC1 Video Amp. 7 10 8 9 0.1 F Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) MEASUREMENT CIRCUIT 2 Noise Figure Meter 50 Noise Source 0.1 F RF 1 AGC Amp. Mixer IF 16 1 F 1 k 0.1 F//20 pF 2 15 3 14 1 F 1 k 1 F VAGC 0.1 F 4 LO Note OSC OUT Buffer Amp. 13 12 5 0.1 F 50 11 6 0.1 F VCC1 1 F Video Amp. 7 10 8 9 0.1 F Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) 8 Data Sheet PU10165EJ05V0DS 51 PC3220GR MEASUREMENT CIRCUIT 3 1 F 0.1 F RF AGC Amp. 1 Mixer 1 F 0.1 F//20 pF 1 F VAGC IF 16 2 15 3 14 51 0.1 F OSC OUT Buffer Amp. 4 LO 13 12 5 0.1 F 11 6 0.1 F 7 10 8 9 0.1 F 1 F VCC1 Video Amp. Network Analyzer LO Port Input Impedance 50 IF Port Input Impedance 50 RF Port Input Impedance MEASUREMENT CIRCUIT 4 1 AGC Amp. Mixer 16 2 15 3 14 4 Vin 1 F OSC OUT Buffer Amp. 13 1 F 5 12 6 11 51 51 51 Video Amp. 1 F 1 k 7 10 8 9 50 Vout 50 1 F 1 k VCC2 1 F 0.1 F Spectrum Analyzer 51 VOUT Remarks 1. Voltage Gain (Single Ended) = 20 log (VOUT/Vin) (dB) 2. Differential Gain (Differential-out) = 20 log (2 x VOUT/Vin) (dB) 3. VOUT = Vout (Measured Value) x (1 050/50) Data Sheet PU10165EJ05V0DS 9 PC3220GR MEASUREMENT CIRCUIT 5 AGC Amp. 1 Mixer 16 2 15 3 14 OSC OUT Buffer Amp. 4 Input Impedance 1 F 13 1 F 50 12 5 Network Analyzer 51 11 6 Video Amp. 50 1 F 7 10 8 9 1 F 1 F VCC2 Output Impedance 0.1 F 51 MEASUREMENT CIRCUIT 6 0.1 F RF 1 50 Mixer 1 k 16 0.1 F//20 pF 1 F VAGC 1 k 2 15 3 14 0.1 F 4 LO AGC Amp. Note 50 1 F OSC OUT Buffer Amp. Loss 10 dB @50 MHz 13 1 F 12 5 0.1 F 11 6 0.1 F Spectrum Analyzer Video Amp. 10 7 1 F 1 k VCC1 1 F 0.1 F 1 F 1 k VCC2 1 F 0.1 F Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) 10 50 9 8 Data Sheet PU10165EJ05V0DS 51 PC3220GR MEASUREMENT CIRCUIT 7 Noise Figure Meter 50 Noise Source 0.1 F RF 1 AGC Amp. Mixer 1 k 16 0.1 F//20 pF 1 F VAGC 1 k 2 15 3 14 0.1 F 4 LO Note 50 1 F OSC OUT Buffer Amp. 13 1 F 12 5 0.1 F 11 6 0.1 F Video Amp. 7 10 8 9 1 F 1 k VCC1 1 F 0.1 F 1 F 1 k 51 VCC2 1 F 0.1 F Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type) The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PU10165EJ05V0DS 11 PC3220GR ILLUSTRATION OF THE MEASUREMENT CIRCUIT1, 2 ASSEMBLED ON EVALUATION BOARD 1 k 51 0.1 F 1 k IFout 1F 0.1 F VCC1 (AGC + MIX) 0.1 F 20 pF RF1, RF2in 1F 0.1 F Note 1F 0.1 F PC3220GR VAGC Note Balun Transformer Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents cutout 12 Data Sheet PU10165EJ05V0DS LOin PC3220GR ILLUSTRATION OF THE MEASUREMENT CIRCUIT3 ASSEMBLED ON EVALUATION BOARD 1F 51 0.1 F IFout 1F 0.1 F VCC1 (AGC + MIX) 0.1 F 20 pF RFin 1F 0.1 F 1F 0.1 F PC3220GR LOin VAGC Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents cutout 5. : Represents short-circuit strip Data Sheet PU10165EJ05V0DS 13 PC3220GR ILLUSTRATION OF THE MEASUREMENT CIRCUIT4 ASSEMBLED ON EVALUATION BOARD Vin 1 k 51 Vout 1F 1F 1F 0.1 F 1F 1F PC3220GR Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents short-circuit strip 14 Data Sheet PU10165EJ05V0DS 51 1 k VCC2 (Video) PC3220GR ILLUSTRATION OF THE MEASUREMENT CIRCUIT5 ASSEMBLED ON EVALUATION BOARD Input Impedance Output Impedance 1F 51 1F 0.1 F 1F 1F 51 1F VCC2 (Video) PC3220GR Remarks 1. Back side: GND pattern 2. Solder plated on pattern 3. : Through hole 4. : Represents short-circuit strip Data Sheet PU10165EJ05V0DS 15 PC3220GR ILLUSTRATION OF THE MEASUREMENT CIRCUIT6, 7 ASSEMBLED ON EVALUATION BOARD 1 k 1F 1 k 1F 1F 0.1 F 1F 1F 0.1 F 1F 0.1 F Note PC3220GR Note Balun Transformer Remarks 1. Back side: GND pattern 2. Solder plated on pattern : Through hole 4. : Represents cutout 5. : Represents short-circuit strip 16 1 k VCC2 (Video) 1F 0.1 F VAGC 3. 51 VCC1 (VGC + MIX) 0.1 F 20 pF RFin Vout Data Sheet PU10165EJ05V0DS LOin PC3220GR Circuit Current1 (Total Block) ICC1 (mA) CIRCUIT CURRENT1 (TOTAL BLOCK) vs. SUPPLY VOLTAGE 60 VAGC = 0 V No Singnal 50 Measurement Cuicuit6 40 30 TA = +25C 20 TA = +85C 10 0 0 1 TA = -40C 2 3 4 5 6 Circuit Current3 (Video Amplifier Block) ICC3 (mA) Supply Voltage VCC1, 2 (V) Circuit Current2 (AGC Amplifier + Mixer Block) ICC2 (mA) TYPICAL CHARACTERISTICS (TA = +25C , unless otherwise specified) CIRCUIT CURRENT2 (AGC AMPLIFIER + MIXER BLOCK) vs. SUPPLY VOLTAGE 30 VCC2 = VAGC = 0 V No Singnal 25 Measurement Cuicuit6 20 15 10 TA = +25C 5 0 TA = +85C 0 1 TA = -40C 2 3 4 5 6 Supply Voltage VCC1 (V) CIRCUIT CURRENT3 (VIDEO AMPLIFIER BLOCK) vs. SUPPLY VOLTAGE 30 VCC1 = VAGC = 0 V No Singnal 25 Measurement Cuicuit6 20 15 10 TA = +25C 5 TA = +85C TA = -40C 0 0 1 2 3 4 5 6 Supply Voltage VCC2 (V) Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 17 PC3220GR -AGC Amplifier Block + Mixer Block- VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE 40 35 35 30 25 20 25 VCC1 = 5.5 V 5.0 V 4.5 V Voltage Gain (dB) Voltage Gain (dB) 30 15 10 5 VAGC = 3.0 V 0 Pin = -50 dBm -5 fLO = 60 to 290 MHz PLO = -15 dBm -10 fIF = 50 MHz Measurement Cuicuit1 -15 0 50 100 150 200 250 5 VAGC = 3.0 V 0 VCC = 5.0 V -5 Pin = -50 dBm fLO = 60 to 290 MHz -10 PLO = -15 dBm -15 fIF = 50 MHz Measurement Cuicuit1 -20 0 50 100 35 30 Voltage Gain (dB) 25 VCC1 = 5.5 V 5.0 V 4.5 V 0 20 15 0 -15 100 150 200 -20 0 250 TA = +85C 50 100 200 RF Input Frequency Range fRF (MHz) VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE 40 35 15 VAGC = 0.5 V 30 VCC = 5.0 V 25 Pin = -20 dBm fLO = 60 to 290 MHz 20 PLO = -15 dBm 15 fIF = 50 MHz Measurement Cuicuit1 10 VAGC = 0.5 V 35 Pin = -20 dBm fLO = 60 to 290 MHz 30 PLO = -15 dBm 25 fIF = 50 MHz Measurement Cuicuit1 20 10 5 -15 0 150 RF Input Frequency Range fRF (MHz) VCC1 = 4.5 V 5.0 V 5.5 V 250 5 0 TA = +25C TA = -40C TA = +85C -5 -10 -10 -15 50 100 150 200 250 -20 0 RF Input Frequency Range fRF (MHz) Remark The graphs indicate nominal characteristics. 18 TA = -40C VAGC = 1.5 V VCC = 5.0 V Pin = -50 dBm fLO = 60 to 290 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit1 -5 -10 50 TA = +25C 250 5 -10 -5 200 10 -5 0 150 VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE Voltage Gain (dB) Voltage Gain (dB) 10 VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE 5 -15 0 Voltage Gain (dB) 15 RF Input Frequency Range fRF (MHz) VAGC = 1.5 V 35 Pin = -50 dBm fLO = 60 to 290 MHz 30 PLO = -15 dBm 25 fIF = 50 MHz Measurement Cuicuit1 20 10 TA = +25C RF Input Frequency Range fRF (MHz) 40 15 TA = -40C TA = +85C 20 Data Sheet PU10165EJ05V0DS 50 100 150 200 RF Input Frequency Range fRF (MHz) 250 PC3220GR VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE 40 35 35 30 30 25 25 20 VCC1 = 5.5 V 5.0 V 4.5 V 20 Voltage Gain (dB) Voltage Gain (dB) VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE 15 10 5 VAGC = 3.0 V 0 Pin = -50 dBm -5 fLO = 94 to 234 MHz PLO = -15 dBm -10 fRF = 84 MHz Measurement Cuicuit1 -15 0 20 60 40 80 100 120 140 160 10 5 VAGC = 3.0 V 0 VCC1 = 5.0 V -5 Pin = -50 dBm fLO = 94 to 234 MHz -10 PLO = -15 dBm -15 fRF = 84 MHz Measurement Cuicuit1 -20 40 0 20 60 35 15 VAGC = 1.5 V 30 VCC1 = 5.0 V 25 Pin = -50 dBm fLO = 94 to 234 MHz 20 PLO = -15 dBm 15 fRF = 84 MHz Measurement Cuicuit1 10 Voltage Gain (dB) 10 VCC1 = 4.5 V 5.0 V 5.5 V 5 0 -5 -10 -15 40 60 80 -20 0 100 120 140 160 IF Output Frequency Range fIF (MHz) TA = +85C 20 40 60 35 15 VAGC = 0.5 V 30 VCC1 = 5.0 V 25 Pin = -20 dBm fLO = 94 to 234 MHz 20 PLO = -15 dBm 15 fRF = 84 MHz Measurement Cuicuit1 10 Voltage Gain (dB) 5 0 -5 VCC1 = 4.5 V 5.0 V 5.5 V 5 0 TA = +25C TA = -40C TA = +85C -5 -10 -15 -10 -15 0 100 120 140 160 VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE 40 10 80 IF Output Frequency Range fIF (MHz) VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE VAGC = 0.5 V 35 Pin = -20 dBm fLO = 94 to 234 MHz 30 PLO = -15 dBm 25 fRF = 84 MHz Measurement Cuicuit1 20 TA = -40C 0 -10 20 TA = +25C 5 -5 -15 0 100 120 140 160 VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE 40 VAGC = 1.5 V 35 Pin = -50 dBm fLO = 94 to 234 MHz 30 PLO = -15 dBm 25 fRF = 84 MHz Measurement Cuicuit1 20 80 IF Output Frequency Range fIF (MHz) VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE Voltage Gain (dB) TA = +25C 15 IF Output Frequency Range fIF (MHz) Voltage Gain (dB) TA = -40C TA = +85C 20 40 60 80 100 120 140 160 -20 0 IF Output Frequency Range fIF (MHz) 20 40 60 80 100 120 140 160 IF Output Frequency Range fIF (MHz) Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 19 PC3220GR VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 0 VCC1 = 4.5 V 5.0 V 5.5 V fRF = 84 MHz Pin = -50 dBm fLO = 134 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit1 0.5 1.0 1.5 2.5 2.0 3.0 Voltage Gain (dB) Voltage Gain (dB) VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE 3.5 VCC1 = 5.0 V fRF = 84 MHz Pin = -50 dBm fLO = 134 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit1 0.5 1.0 1.5 2.5 2.0 3.0 3.5 Gain Control Voltage Range VAGC (V) NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE 35 25 20 15 10 VCC1 = 5.5 V 5.0 V 4.5 V 5 0 1.0 VCC1 = 5.0 V fLO = 134 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit2 30 Noise Figure NF (dB) fLO = 134 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit2 30 25 20 15 10 TA = +85C +25C -40C 5 1.5 2.0 2.5 3.0 3.5 0 1.0 Gain Control Voltage Range VAGC (V) Remark The graphs indicate nominal characteristics. 20 TA = -40C +25C +85C Gain Control Voltage Range VAGC (V) 35 Noise Figure NF (dB) 40 35 30 25 20 15 10 5 0 -5 -10 -15 -20 0 Data Sheet PU10165EJ05V0DS 1.5 2.0 2.5 3.0 Gain Control Voltage Range VAGC (V) 3.5 PC3220GR OUTPUT POWER vs. INPUT POWER -25 VCC1 = 5.5 V 5.0 V 4.5 V -30 -35 -40 VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit1 -45 -50 -55 -55 -50 -45 -40 -35 -30 -25 -20 -15 TA = +25C -25 -30 -40C -35 -40 VCC1 = 5.0 V VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = -15 dBm -50 fIF = 50 MHz Measurement Cuicuit1 -55 -55 -50 -45 -40 -35 -30 -25 -20 -15 +85C -45 2 TONE OUTPUT POWER vs. INPUT POWER 2 TONE OUTPUT POWER vs. INPUT POWER VCC1 = 4.5 V 5.0 V -30 5.5 V -40 -50 -60 -70 -80 -90 -50 -40 VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 -30 -20 -20 -30 TA = -40C +25C +85C -40 -50 -60 -70 -80 -90 -100 -60 -50 -40 VCC1 = 5.0 V VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 -30 -20 Input Power Pin (dBm) Input Power Pin (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 TONE OUTPUT POWER vs. INPUT POWER -20 VCC1 = 4.5 V 5.0 V -30 5.5 V -40 -50 -60 -70 -80 -90 -100 -50 -20 Input Power Pin (dBm) -20 -100 -60 -15 Input Power Pin (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) -20 Output Power Pout (50 /1 050 ) (dBm) -15 -40 -30 VAGC = 2.1 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 -20 -10 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) Output Power Pout (50 /1 050 ) (dBm) OUTPUT POWER vs. INPUT POWER -20 -30 TA = -40C +25C +85C -40 -50 -60 -70 -80 -90 -100 -50 Input Power Pin (dBm) -40 -30 VCC1 = 5.0 V VAGC = 2.1 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 -20 -10 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 21 -20 VCC1 = 4.5 V 5.0 V -30 5.5 V -40 -50 -60 -70 -80 -90 -20 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -30 -20 -10 VCC1 = 5.0 V VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 0 10 Input Power Pin (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 TONE OUTPUT POWER vs. INPUT POWER VCC1 = 4.5 V 5.0 V -30 5.5 V -40 -50 -60 -70 -80 -90 -20 -10 VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 0 10 -20 -30 TA = -40C +25C +85C -40 -50 -60 -70 -80 -90 -100 -30 Input Power Pin (dBm) -20 -10 VCC1 = 5.0 V VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 0 10 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. 22 TA = -40C +25C +85C Input Power Pin (dBm) -20 -100 -30 2 TONE OUTPUT POWER vs. INPUT POWER 2 tone Output Power Pout (50 /1 050 ) (dBm) -100 -30 VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit1 0 10 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) PC3220GR Data Sheet PU10165EJ05V0DS PC3220GR -Video Amplifier Block- VOLTAGE GAIN (SINGLE-ENDED) vs. INPUT FREQUENCY 50 50 VCC2 = 4.5 V 49 5.0 V 5.5 V 48 49 Voltage Gain (Single-ended) (dB) Voltage Gain (Single-ended) (dB) VOLTAGE GAIN (SINGLE-ENDED) vs. INPUT FREQUENCY 47 46 45 44 43 42 41 Pin = -55 dBm Measurement Cuicuit4 40 10 50 100 TA = -40C +25C +85C 48 47 46 45 44 43 42 VCC2 = 5 V 41 Pin = -55 dBm Measurement Cuicuit4 40 10 Input Frequency fin (MHz) OUTPUT POWER vs. INPUT POWER -10 -15 -20 -25 -30 -35 -40 -50 -45 -40 -35 fIF = 50 MHz Measurement Cuicuit4 -20 -15 -30 -25 0 -5 TA = -40C +25C +85C -10 -15 -20 -25 -30 -35 -40 -50 -45 -40 -35 VCC2 = 5 V fIF = 50 MHz Measurement Cuicuit4 -20 -15 -30 -25 Input Power Pin (dBm) Input Power Pin (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 TONE OUTPUT POWER vs. INPUT POWER 0 VCC2 = 4.5 V 5.0 V -10 5.5 V -20 -30 -40 -50 -60 -70 -80 -90 -60 Output Power Pout (50 /1 050 ) (dBm) VCC2 = 4.5 V 5.0 V 5.5 V -50 -40 fIF1 = 50 MHz fIF2 = 49 MHz Measurement Cuicuit4 -30 -20 2 tone Output Power Pout (50 /1 050 ) (dBm) Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) -5 100 Input Frequency fin (MHz) OUTPUT POWER vs. INPUT POWER 0 50 0 -10 TA = -40C +25C +85C -20 -30 -40 -50 -60 -70 -80 -90 -60 Input Power Pin (dBm) -50 -40 VCC2 = 5 V fIF1 = 50 MHz fIF2 = 49 MHz Measurement Cuicuit4 -30 -20 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 23 PC3220GR -Total Block- VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE VOLTAGE GAIN vs. RF INPUT FREQUENCY RANGE 80 80 VAGC = 3.0 V (Pin = -70 dBm) 50 VAGC = 1.5 V (Pin = -40 dBm) 40 30 VAGC = 0.5 V (Pin = -40 dBm) 20 fLO = 60 to 290 MHz 10 PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit6 0 50 100 0 150 VAGC = 3.0 V (Pin = -70 dBm) 50 VAGC = 1.5 V (Pin = -40 dBm) 40 30 20 200 250 Measurement Cuicuit6 150 200 250 100 RF Input Frequency Range fRF (MHz) VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE VOLTAGE GAIN vs. IF OUTPUT FREQUENCY RANGE 80 fLO = 94 to 234 MHz PLO = -15 dBm fRF = 84 MHz Measurement Cuicuit6 60 VAGC = 3.0 V (Pin = -70 dBm) 50 VAGC = 1.5 V (Pin = -40 dBm) 40 30 VCC1, 2 = 4.5 V 5.0 V 5.5 V 10 20 40 0 60 80 100 Measurement Cuicuit6 VCC1, 2 = 5 V fLO = 94 to 234 MHz PLO = -15 dBm fRF = 84 MHz 70 VAGC = 0.5 V (Pin = -40 dBm) 20 60 VAGC = 3.0 V (Pin = -70 dBm) 50 VAGC = 1.5 V (Pin = -40 dBm) 40 30 20 10 TA = -40C +25C +85C 0 40 20 0 120 140 160 VAGC = 0.5 V (Pin = -40 dBm) 60 80 100 120 140 160 IF Output Frequency Range fIF (MHz) IF Output Frequency Range fIF (MHz) VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE VOLTAGE GAIN vs. GAIN CONTROL VOLTAGE RANGE 75 70 70 65 65 55 60 VCC1, 2 = 4.5 V 5.0 V 5.5 V 50 45 40 fRF = 84 MHz Pin = -70 dBm fLO = 134 MHz PLO = -15 dBm Measurement Cuicuit6 35 25 20 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 Voltage Gain (dB) 60 30 55 50 45 TA = -40C +25C +85C 40 35 30 25 20 15 0 Gain Control Voltage Range VAGC (V) Remark The graphs indicate nominal characteristics. 24 VAGC = 0.5 V (Pin = -40 dBm) TA = -40C +25C +85C 0 50 0 RF Input Frequency Range fRF (MHz) 70 Voltage Gain (dB) 60 10 80 Voltage Gain (dB) Voltage Gain (dB) 60 PLO = -15 dBm VCC1, 2 = 5 V fLO = 60 to 290 MHz fIF = 50 MHz 70 Voltage Gain (dB) Voltage Gain (dB) VCC1, 2 = 4.5 V 5.0 V 70 5.5 V Data Sheet PU10165EJ05V0DS 0.5 1.0 1.5 VCC1, 2 = 5 V fRF = 84 MHz Pin = -70 dBm fLO = 134 MHz PLO = -15 dBm Measurement Cuicuit6 2.5 3.0 3.5 2.0 Gain Control Voltage Range VAGC (V) PC3220GR NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE 35 35 30 30 25 Noise Figure NF (dB) Noise Figure NF (dB) NOISE FIGURE vs. GAIN CONTROL VOLTAGE RANGE VCC1, 2 = 4.5 V 5.0 V 5.5 V 20 15 10 fIF = 50 MHz fLO = 134 MHz 5 PLO = -15 dBm Measurement Cuicuit7 0 1.0 1.5 2.0 2.5 3.0 3.5 25 TA = -40C +25C +85C 20 15 10 VCC1, 2 = 5 V fIF = 50 MHz 5 fLO = 134 MHz PLO = -15 dBm Measurement Cuicuit7 0 1.0 1.5 2.0 Gain Control Voltage Range VAGC (V) -15 -20 -25 VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50 MHz Measurement Cuicuit6 -30 -35 -40 -75 -70 -65 -60 -55 -50 -45 -40 -35 0 -5 TA = +25C -10 -15 -40C -20 -25 VCC1, 2 = 5.0 V VAGC = 3.0 V fRF = 84 MHz fLO = 134 MHz PLO = -15 dBm -35 fIF = 50 MHz Measurement Cuicuit6 -40 -75 -70 -65 -60 -55 -50 -45 -40 -35 +85C -30 Input Power Pin (dBm) Input Power Pin (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 TONE OUTPUT POWER vs. INPUT POWER 0 VCC1, 2 = 4.5 V 5.0 V -10 5.5 V -20 -30 -40 -50 -60 -70 -80 -80 Output Power Pout (50 /1 050 ) (dBm) -10 VCC1, 2 = 5.5 V 5.0 V 4.5 V -70 -60 VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 -50 -40 3.5 OUTPUT POWER vs. INPUT POWER 2 tone Output Power Pout (50 /1 050 ) (dBm) Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) -5 3.0 Gain Control Voltage Range VAGC (V) OUTPUT POWER vs. INPUT POWER 0 2.5 0 -10 TA = -40C +25C +85C -20 -30 -40 -50 -60 -70 -80 -80 -70 -60 VCC1, 2 = 5.0 V VAGC = 3.0 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 -50 -40 Input Power Pin (dBm) Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 25 0 VCC1, 2 = 4.5 V 5.0 V -10 5.5 V -20 -30 -40 -50 -60 -70 -80 -50 -40 -30 VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 -20 -10 2 TONE OUTPUT POWER vs. INPUT POWER 0 TA = -40C +25C +85C -10 -20 -30 -40 -50 -60 -70 -80 -50 -30 Input Power Pin (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 TONE OUTPUT POWER vs. INPUT POWER VCC1, 2 = 4.5 V 5.0 V -10 5.5 V -20 -30 -40 -50 -60 -70 -25 -15 VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 -5 5 0 -10 TA = -40C +25C +85C -20 -30 -40 -50 -60 -70 -80 -35 Input Power Pin (dBm) -25 -15 VCC1, 2 = 5.0 V VAGC = 0.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 -5 5 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. 26 -40 VCC1, 2 = 5 V VAGC = 1.5 V fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz Measurement Cuicuit6 -20 -10 Input Power Pin (dBm) 0 -80 -35 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 TONE OUTPUT POWER vs. INPUT POWER 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) 2 tone Output Power Pout (50 /1 050 ) (dBm) PC3220GR Data Sheet PU10165EJ05V0DS PC3220GR -20 4.0 Pout 3.5 -30 3.0 -40 2.5 -50 VAGC 2.0 -60 1.5 -70 -80 1.0 0.5 IM3 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0 Gain Control Voltage Range VAGC (V) 3rd Order Intermoduration Distortion IM3 (dBc) 2 tone Output Power Pout (50 /1 050 ) (dBm) IM3, 2 TONE OUTPUT POWER, GAIN CONTROL VOLTAGE vs. INPUT POWER VCC1, 2 = 4.5 V 5.0 V 5.5 V Conditions fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz @Vout = 0.7 Vp-p/tone Measurement Cuicuit6 Input Power Pin (dBm) -20 4.0 Pout 3.5 -30 3.0 -40 2.5 -50 VAGC 2.0 -60 1.5 -70 1.0 IM3 -80 0.5 -90 -80 -70 -60 -50 -40 -30 -20 -10 0 0 Gain Control Voltage Range VAGC (V) 3rd Order Intermoduration Distortion IM3 (dBc) 2 tone Output Power Pout (50 /1 050 ) (dBm) IM3, 2 TONE OUTPUT POWER, GAIN CONTROL VOLTAGE vs. INPUT POWER TA = -40C +25C +85C Conditions fRF1 = 84 MHz fRF2 = 85 MHz fLO = 134 MHz PLO = -15 dBm fIF = 50, 49 MHz @Vout = 0.7 Vp-p/tone Measurement Cuicuit6 Input Power Pin (dBm) Remark The graphs indicate nominal characteristics. Data Sheet PU10165EJ05V0DS 27 PC3220GR S-PARAMETERS -AGC Amplifier Block + Mixer Block- (VCC1 = 5.0 V, VAGC = 3.0 V, by measurement circuit 3) MIXER RF Input Impedance 1 2 3 4 1 : 30 MHz 2 : 84 MHz 3 : 150 MHz 4 : 250 MHz 1.830 k 443.0 207.4 109.7 -1.603 k -1.096 k -728.7 -454.1 3.309 pF 1.730 pF 1.456 pF 1.402 pF 1 : 10 MHz 2 : 36 MHz 3 : 50 MHz 4 : 100 MHz 29.48 29.98 30.17 30.79 634.6 m 1.908 2.476 4.171 10.07 nH 8.431 nH 7.884 nH 6.638 nH MIXER IF Output Impedance 2 3 1 4 28 Data Sheet PU10165EJ05V0DS PC3220GR MIXER OSC Input Impedance 1 2 3 4 1 : 30 MHz 2 : 100 MHz 3 : 134 MHz 4 : 250 MHz Data Sheet PU10165EJ05V0DS 1.820 k 415.5 284.6 133.4 -1.823 k -1.010 -813.1 -487.0 2.911 pF 1.575 pF 1.461 pF 1.307 pF 29 PC3220GR -Video Amplifier Block- (VCC2 = 5.0 V, by measurement circuit 5) Video Amplifier Input Impedance 1 3 4 2 1 : 10 MHz 2 : 36 MHz 3 : 50 MHz 4 : 100 MHz 1.187 k 389.8 333.4 245.5 -1.177 k -588.3 -481.1 -369.7 13.54 pF 7.516 pF 6.617 pF 4.304 pF 1 : 10 MHz 2 : 36 MHz 3 : 50 MHz 4 : 100 MHz 10.04 15.86 21.54 45.48 5.225 17.70 22.61 23.89 83.16 nH 78.25 nH 71.96 nH 38.02 nH Video Amplifier Output Impedance 2 1 30 3 4 Data Sheet PU10165EJ05V0DS PC3220GR PACKAGE DIMENSIONS 16-PIN PLASTIC SSOP (5.72 mm (225)) (UNIT: mm) 16 9 detail of lead end 1 5 5 8 5.20.3 6.40.2 1.8 MAX. 4.40.2 1.50.1 1.00.2 S 0.50.2 0.65 0.22+0.10 -0.05 0.475 MAX. 0.17 +0.08 -0.07 0.10 S 0.10 M 0.1250.075 Data Sheet PU10165EJ05V0DS 31 PC3220GR NOTES ON CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation). All the ground pins must be connected together with wide ground pattern to decrease impedance difference. (3) The bypass capacitor should be attached to VCC line. RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Wave Soldering Soldering Conditions Condition Symbol Peak temperature (package surface temperature) : 260C or below Time at peak temperature : 10 seconds or less Time at temperature of 220C or higher : 60 seconds or less Preheating time at 120 to 180C : 12030 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (molten solder temperature) : 260C or below Time at peak temperature : 10 seconds or less IR260 WS260 Preheating temperature (package surface temperature) : 120C or below Partial Heating Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (pin temperature) : 350C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Caution Do not use different soldering methods together (except for partial heating). 32 Data Sheet PU10165EJ05V0DS HS350 PC3220GR When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. * The information in this document is current as of January, 2005. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PU10165EJ05V0DS 33 PC3220GR For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: salesinfo@ml.ncsd.necel.com (sales and general) techinfo@ml.ncsd.necel.com (technical) Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0406