To our customers,
Old Company Name in Catalogs and Other Documents
On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology
Corporation, and Renesas Electronics Corporation took over all the business of both
companies. Therefore, although the old company name remains in this document, it is a valid
Renesas Electronics document. We appreciate your understanding.
Renesas Electronics website: http://www.renesas.com
April 1st, 2010
Renesas Electronics Corporation
Issued by: Renesas Electronics Corporation (http://www.renesas.com)
Send any inquiries to http://www.renesas.com/inquiry.
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is
subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please
confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to
additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights
of third parties by or arising from the use of Renesas Electronics products or technical information described in this document.
No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights
of Renesas Electronics or others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of
semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software,
and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by
you or third parties arising from the use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control
laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas
Electronics products or the technology described in this document for any purpose relating to military applications or use by
the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and
technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited
under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics
does not warrant that such information is error free. Renesas Electronics assumes no liability whatsoever for any damages
incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: “Standard”, “High Quality”, and
“Specific”. The recommended applications for each Renesas Electronics product depends on the product’s quality grade, as
indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular
application. You may not use any Renesas Electronics product for any application categorized as “Specific” without the prior
written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way
liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an
application categorized as “Specific” or for which the product is not intended where you have failed to obtain the prior written
consent of Renesas Electronics. The quality grade of each Renesas Electronics product is “Standard” unless otherwise
expressly specified in a Renesas Electronics data sheets or data books, etc.
“Standard”: Computers; office equipment; communications equipment; test and measurement equipment; audio and visual
equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots.
“High Quality”: Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-
crime systems; safety equipment; and medical equipment not specifically designed for life support.
“Specific”: Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or
systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare
intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics,
especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation
characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or
damages arising out of the use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have
specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further,
Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to
guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a
Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire
control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because
the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system
manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental
compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable
laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS
Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with
applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas
Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this
document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) “Renesas Electronics” as used in this document means Renesas Electronics Corporation and also includes its majority-
owned subsidiaries.
(Note 2) “Renesas Electronics product(s)” means any product developed or manufactured by or for Renesas Electronics.
DESCRIPTION
The
µ
PC3220GR is a silicon monolithic IC designed for use as IF down-converter for digital CATV. This IC
consists of AGC amplifier, mixer and video amplifier.
The package is 16-pin SSOP (Shrink Small Outline Package) suitable for surface mount.
This IC is manufactured using our 10 GHz fT NESAT II AL silicon bipolar process.
This process uses silicon nitride passivation film. This material can protect chip surface from external pollution and
prevent corrosion/migration. Thus, this IC has excellent performance, uniformly and reliability.
FEATURES
• Low distortion IIP3 = +1.0 dBm TYP.
• Wide AGC dynamic range GCRtotal = 45.5 dB TYP.
• On chip video amplifier
• Supply voltage : 5 V
• Packaged in 16-pin SSOP suitable for high-density surface mounting
APPLICATION
• Digital CATV receivers
ORDERING INFORMATION
Part Number Order Number Package Marking Supplying Form
µ
PC3220GR-E1
µ
PC3220GR-E1-A 16-pin plastic SSOP
(5.72 mm (225)) (Pb-Free) Note
C3220 • Embossed tape 12 mm wide
• Pin 1 indicates pull-out direction of tape
• Qty 2.5 kpcs/reel
Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact
your nearby sales office.
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order:
µ
PC3220GR
DATA SHEET
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that
this is the latest version.
Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices
representative for availability and additional information.
LOW DISTORTION DOWN-CONVERTER IC FOR DIGITAL CATV
BIPOLAR ANALOG INTEGRATED CIRCUIT
µ
PC3220GR
Document No. PU10165EJ05V0DS (5th edition)
Date Published January 2005 CP(K)
Printed in Japan
The mark shows major revised points.
NEC Compound Semiconductor Devices, Ltd. 2002, 2005
INTERNAL BLOCK DIAGRAM AND PIN CONFIGURATION
(Top View)
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
RF IN1
RF IN2
VAGC
GND
OSC IN1
OSC IN2
VCC1
VCC2
GND
MIX OUT2
MIX OUT1
AMP IN1
AMP IN2
GND
AMP OUT1
AMP OUT2
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
Data Sheet PU10165EJ05V0DS
2
µ
PC3220GR
PIN EXPLANATIONS
PIN
No. Symbol
Pin
Voltage
(V, TYP.)
Explanation Equivalent Circuit
1 RF IN1 1.46
2 RF IN2 1.46
Input pin of IF signal.
1-pin is same phase and 2-pin is opposite phase
at balance input.
In case of single input, 1-pin or 2-pin should be
grounded through capacitor (example 10 nF).
AGC
Control
7
1 2
3 VAGC 0 to 3.5 Automatic gain control pin.
This pins bias govern the AGC output level.
Minimum gain at VAGC = 0 V
Maximum gain at VAGC = 3.5 V
7
3
AGC
Control
4 GND 0.0 Ground pin.
Must be connected to the system ground with
minimum inductance.
Ground pattern on the board should be formed as
wide as possible.
5 OSC IN1 2.6
6 OSC IN2 2.6
Input pin of Oscillator signal.
5-pin is same phase and 6-pin is opposite phase
at balance input.
In case of single input, 5-pin or 6-pin should be
grounded through capacitor (ex. 10 nF).
7
5 6
7 VCC1 5.0 Power supply pin of IF down convertor block.
Must be connected bypass capacitor to minimize
ground impedance.
8 VCC2 5.0 Power supply pin of video amplifier.
Must be connected bypass capacitor to minimize
ground impedance.
Data Sheet PU10165EJ05V0DS 3
µ
PC3220GR
PIN
No. Symbol
Pin
Voltage
(V, TYP.)
Explanation Equivalent Circuit
9 AMP
OUT2
2.5
10 AMP
OUT1
2.5
Output pin of video amplifier.
OUT1 and IN1 are same phase.
OUT2 and IN2 are same phase.
8
9
10
11 GND 0.0 Ground pin.
Must be connected to the system ground with
minimum inductance.
Ground pattern on the board should be formed as
wide as possible.
12 AMP IN2 1.45
13 AMP IN1 1.45
Signal input pin of video amplifier.
This pin is high impedance.
8
12 13
14 GND 0.0 Ground pin.
Must be connected to the system ground with
minimum inductance.
Ground pattern on the board should be formed as
wide as possible.
15 MIX OUT1 3.7
16 MIX OUT2 3.7
Output pin of mixer.
This output pin features low-impedance because
of its emitter-follower output port.
7
15
16
Data Sheet PU10165EJ05V0DS
4
µ
PC3220GR
ABSOLUTE MAXIMUM RATINGS
Parameter Symbol Conditions Ratings Unit
Supply Voltage VCC TA = +25°C 6.0 V
Power Dissipation PD TA = +85°C Note 433 mW
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −55 to +150 °C
Note Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB
RECOMMENDED OPERATING RENGE
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Supply Voltage VCC 4.5 5.0 5.5 V
Operating Ambient Temperature TA VCC = 4.5 to 5.5 V −40 +25 +85 °C
Gain Control Voltage Range VAGC 0 − VCC V
Data Sheet PU10165EJ05V0DS 5
µ
PC3220GR
ELECTRICAL CHARACTERISTICS (TA = +25°C, VCC = 5 V)
Parameter Symbol Test Conditions MIN. TYP. MAX. Unit
DC Characteristics
Circuit Current 1
(Total Block)
ICC1 No input signal, VCC1 = VCC2 = 5 V
Note 4
33.0 42.0 53.5 mA
Circuit Current 2
(AGC Amplifier Block + Mixer Block)
ICC2 No input signal, VCC1 = 5 V Note 4 15.0 20.0 25.5 mA
Circuit Current 3
(Video Amplifier Block)
ICC3 No input signal, VCC2 = 5 V Note 4 18.0 22.0 28.0 mA
AGC Voltage High Level VAGC (H) @ Maximum gain Note 1 3.0 − VCC V
AGC Voltage Low Level VAGC (L) @ Minimum gain Note 1 0 − 0.5 V
RF Characteristics
(AGC Amplifier Block + Mixer Block: fRF = 84 MHz, fLO = 134 MHz, PLO = −15 dBm, fIF = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ)
RF Input Frequency Range fRF fIF = 50 MHz constant Note 1 30 − 250 MHz
IF Output Frequency Range fIF fRF = 84 MHz constant Note 1 0.1 − 150 MHz
Maximum Conversion Gain CGMAX VAGC = 3.0 V, Pin = −50 dBm Note 1 30.5 33.0 35.5 dB
Minimum Conversion Gain CGMIN VAGC = 0.5 V, Pin = −20 dBm Note 1 −18.0 −12.5 −3.5 dB
AGC Dynamic Range GCRAGC VAGC = 0.5 to 3.0 V Note 1 36.0 45.5 − dB
Noise Figure NF DSB, VAGC = 3.0 V (@ Maximum gain)
Note 2
− 7.0 8.5 dB
3rd Order Intermodulaion Distortion IM3 Vout = 0.236 Vp-p × 2 tone,
(single-ended output),
Pin −30 dBm/tone
fRF1 = 84 MHz, fRF2 = 85 MHz Note 1
24.0 26.5 − dBc
RF Characteristics (Video Amplifier Block: f = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ)
Differential Gain Gdiff Pin = −55 dBm Note 3 48.0 50.5 53.5 dB
Maximum Output Voltage 2 Voclip2 Pin = −25 dBm Note 3 2.95 3.70 − Vp-p
Notes 1. By measurement circuit 1
2. By measurement circuit 2
3. By measurement circuit 4
4. By measurement circuit 6
Data Sheet PU10165EJ05V0DS
6
µ
PC3220GR
STANDARD CHARACTERISTICS (TA = +25°C, VCC = 5 V, ZS = 50 Ω)
Parameter Symbol Test Conditions Reference Value Unit
AGC Amplifier Block + Mixer Block (fRF = 84 MHz, fLO = 134 MHz, PLO = −15 dBm, fIF = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ)
Input 3rd Order Distortion
Intercept Point
IIP3 VAGC = 0.5 V (@ Minimum gain)
fRF1 = 84 MHz, fRF2 = 85 MHz Note 1
+1.0 dBm
Maximum Output Voltage1 Voclip1 VAGC = 3.0 V, Pin = −20 dBm Note 1 0.65 Vp-p
RF IN Impedance ZRFin VAGC = 3.0 V, f = 84 MHz Note 2 440 − j1100 Ω
OSC IN Impedance ZOSCin VAGC = 3.0 V, f = 134 MHz Note 2 280 − j810 Ω
MIXER OUT Impedance ZMIXout VAGC = 3.0 V, f = 50 MHz Note 2 30.2 + j2.5 Ω
Video Amplifier Block (f = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ)
Frequency Range fBW Pin = −55 dBm, G (f = 10 MHz) −1 dB
Note 3
60 MHz
Input Impedance ZAMPin f = 50 MHz Note 4 330 − j480 Ω
Output Impedance ZAMPout f = 50 MHz Note 4 21.9 + j22.6 Ω
3rd Order Intermodulaion Distortion IM3 Vout = 0.7 Vp-p × 2 tone,
fin1 = 49 MHz, fin2 = 50 MHz Note 3
55.0 dBc
Total Block (fRF = 84 MHz, fLO = 134 MHz, PLO = −15 dBm, fIF = 50 MHz, ZS = 50 Ω, ZL = 1 kΩ)
Maximum Conversion Gain CGMAX VAGC = 3.0 V, Pin = −70 dBm Note 5 67.5 dB
Minimum Conversion Gain CGMIN VAGC = 0.5 V, Pin = −40 dBm Note 5 22.0 dB
Total Dynamic Range GCR VAGC = 0.5 to 3.0 V Note 5 45.5 dB
Noise Figure NF DSB, VAGC = 3.0 V (@ Maximum gain)
Note 6
7.0 dB
Maximum Output Voltage Voclip VAGC = 3.0 V (@ Minimum gain)
Note 5
3.7 Vp-p
Input 3rd Order Distortion
Intercept Point
IIP3total VAGC = 0.5 V (@ Minimum gain)
fRF1 = 84 MHz, fRF2 = 85 MHz Note 5
+1.0 dBm
3rd Order Intermodulaion Distortion IM3total Vout = 0.7 Vp-p × 2 tone,
Pin −40 dBm/tone
fRF1 = 84 MHz, fRF2 = 85 MHz Note 5
51.0 dBc
Notes 1. By measurement circuit 1
2. By measurement circuit 3
3. By measurement circuit 4
4. By measurement circuit 5
5. By measurement circuit 6
6. By measurement circuit 7
Data Sheet PU10165EJ05V0DS 7
µ
PC3220GR
MEASUREMENT CIRCUIT 1
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Note
Spectrum
Analyzer
50 Ω
51 Ω
1 kΩ
50 Ω
50 Ω
RF1
LO
VAGC
VCC1
RF2
50 Ω
1 F
µ
1 F
µ
1 kΩ
1 F
µ
1 F
µ
0.1 F
µ
0.1 F//20 pF
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F
µ
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
IF
Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type)
MEASUREMENT CIRCUIT 2
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Note
51 Ω
1 kΩ
50 Ω
LO
RF
V
AGC
V
CC
1
1 F
µ
1 F
µ
1 kΩ
1 F
µ
1 F
µ
0.1 F
µ
0.1 F//20 pF
µ
0.1 F
µ
0.1 F
µ
50 Ω
Noise Source
0.1 F
µ
Noise Figure Meter
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
0.1 F
µ
IF
Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type)
Data Sheet PU10165EJ05V0DS
8
µ
PC3220GR
MEASUREMENT CIRCUIT 3
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
51 Ω
LO
RF IF
V
AGC
V
CC
1
1 F
µ
1 F
µ
1 F
µ
1 F
µ
0.1 F
µ
0.1 F//20 pF
µ
0.1 F
µ
0.1 F
µ
50 Ω50 Ω
LO Port Input Impedance IF Port Input Impedance
RF Port Input Impedance
Network Analyzer
0.1 F
µ
0.1 F
µ
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
MEASUREMENT CIRCUIT 4
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
V
CC
21 F
µ
1 F
µ
1 F
µ
1 F
µ
1 F
µ
50 Ω
51 Ω
1 kΩ
1 kΩ
51 Ω50 Ω
51 Ω
51 Ω
Spectrum
Analyzer
Vin
Vout
VOUT
0.1 F
µ
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
Remarks 1. Voltage Gain (Single Ended) = 20 log (VOUT/Vin) (dB)
2. Differential Gain (Differential-out) = 20 log (2 × VOUT/Vin) (dB)
3. VOUT = Vout (Measured Value) × (1 050/50)
Data Sheet PU10165EJ05V0DS 9
µ
PC3220GR
MEASUREMENT CIRCUIT 5
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
VCC21 F
µ
1 F
µ
1 F
µ
1 F
µ
1 F
µ
50 Ω
50 Ω
51 Ω
51 Ω
0.1 F
µ
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
Output Impedance
Input Impedance
Network
Analyzer
MEASUREMENT CIRCUIT 6
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Note
Spectrum
Analyzer
50 Ω
51 Ω
1 kΩ
1 kΩ
1 kΩ
50 Ω
50 Ω
RF
LO
V
AGC
V
CC
1
1 F
µ
1 F
µ
1 F
µ
1 F
µ
1 kΩ
1 F
µ
1 F
µ
0.1 F
µ
V
CC
2 1 F
µ
0.1 F
µ
0.1 F
µ
0.1 F//20 pF
µ
0.1 F
µ
0.1 F
µ
Loss 10 dB
@50 MHz
0.1 F
µ
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type)
Data Sheet PU10165EJ05V0DS
10
µ
PC3220GR
MEASUREMENT CIRCUIT 7
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
Note
51 Ω
1 kΩ
1 kΩ
1 kΩ
50 Ω
LO
V
AGC
V
CC
1
1 F
µ
1 F
µ
1 F
µ
1 F
µ
1 kΩ
1 F
µ
1 F
µ
0.1 F
µ
V
CC
2 1 F
µ
0.1 F
µ
0.1 F//20 pF
µ
0.1 F
µ
0.1 F
µ
RF 0.1 F
µ
50 Ω
Noise Figure Meter
Noise Source
0.1 F
µ
Video Amp.
AGC Amp. Mixer
OSC OUT
Buffer Amp.
Note Balun Transformer : TOKO 617DB-1010 B4F (Double balanced type)
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Data Sheet PU10165EJ05V0DS 11
µ
PC3220GR
ILLUSTRATION OF THE MEASUREMENT CIRCUIT1, 2 ASSEMBLED ON EVALUATION BOARD
PC3220GR
µ
Note
1 kΩ
1 kΩ
51 Ω
1 F
µ
0.1 F
µ
0.1 F
µ
20 pF
0.1 F
µ
1 F
µ
0.1 F
µ
1 F
µ
0.1 F
µ
V
AGC
LO
in
RF1, RF2
in
IF
out
V
CC
1 (AGC + MIX)
Note Balun Transformer
Remarks
1. Back side: GND pattern
2. Solder plated on pattern
3. : Through hole
4. : Represents cutout
Data Sheet PU10165EJ05V0DS
12
µ
PC3220GR
ILLUSTRATION OF THE MEASUREMENT CIRCUIT3 ASSEMBLED ON EVALUATION BOARD
PC3220GR
µ
51 Ω
1 F
µ
0.1 F
µ
0.1 F
µ
20 pF
0.1 F
µ
1 F
µ
0.1 F
µ
1 F
µ
0.1 F
µ
V
AGC
LO
in
RF
in
IF
out
V
CC
1 (AGC + MIX)
1 F
µ
Remarks
1. Back side: GND pattern
2. Solder plated on pattern
3. : Through hole
4. : Represents cutout
5. : Represents short-circuit strip
Data Sheet PU10165EJ05V0DS 13
µ
PC3220GR
ILLUSTRATION OF THE MEASUREMENT CIRCUIT4 ASSEMBLED ON EVALUATION BOARD
PC3220GR
µ
1 kΩ
1 F
µ
1 F
µ
1 kΩ
1 F
µ
1 F
µ
51 Ω
0.1 F
µ
1 F
µ
V
CC
2 (Video)
Vout
Vin
51 Ω
Remarks
1. Back side: GND pattern
2. Solder plated on pattern
3. : Through hole
4. : Represents short-circuit strip
Data Sheet PU10165EJ05V0DS
14
µ
PC3220GR
ILLUSTRATION OF THE MEASUREMENT CIRCUIT5 ASSEMBLED ON EVALUATION BOARD
PC3220GR
µ
1 F
µ
1 F
µ
1 F
µ
1 F
µ
0.1 F
µ
1 F
µ
V
CC
2 (Video)
Input Impedance Output Impedance
51 Ω
51 Ω
Remarks
1. Back side: GND pattern
2. Solder plated on pattern
3. : Through hole
4. : Represents short-circuit strip
Data Sheet PU10165EJ05V0DS 15
µ
PC3220GR
ILLUSTRATION OF THE MEASUREMENT CIRCUIT6, 7 ASSEMBLED ON EVALUATION BOARD
PC3220GR
µ
Note
1 kΩ
1 F
µ
1 F
µ
1 kΩ
1 F
µ
1 F
µ
1 kΩ
0.1 F
µ
0.1 F
µ
20 pF
0.1 F
µ
1 F
µ
0.1 F
µ
1 F
µ
0.1 F
µ
1 F
µ
V
AGC
V
CC
1 (VGC + MIX)
V
CC
2 (Video)
Vout
LO
in
RF
in
51 Ω
Note Balun Transformer
Remarks
1. Back side: GND pattern
2. Solder plated on pattern
3. : Through hole
4. : Represents cutout
5. : Represents short-circuit strip
Data Sheet PU10165EJ05V0DS
16
µ
PC3220GR
TYPICAL CHARACTERISTICS (TA = +25°C , unless otherwise specified)
CIRCUIT CURRENT1 (TOTAL BLOCK)
vs. SUPPLY VOLTAGE
Circuit Current1 (Total Block) I
CC
1 (mA)
60
50
40
30
20
10
0
Supply Voltage V
CC
1, 2 (V)
0123456
V
AGC
= 0 V
No Singnal
Measurement
Cuicuit6
T
A
= –40°C
T
A
= +25°C
T
A
= +85°C
CIRCUIT CURRENT2 (AGC AMPLIFIER
+ MIXER BLOCK) vs. SUPPLY VOLTAGE
Circuit Current2 (AGC Amplifier + Mixer Block) I
CC
2 (mA)
30
25
20
15
10
5
0
Supply Voltage V
CC
1 (V)
0123456
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
CIRCUIT CURRENT3 (VIDEO AMPLIFIER
BLOCK) vs. SUPPLY VOLTAGE
Circuit Current3 (Video Amplifier Block) I
CC
3 (mA)
30
25
20
15
10
5
0
Supply Voltage V
CC
2 (V)
0123456
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
V
CC
2 = V
AGC
= 0 V
No Singnal
Measurement
Cuicuit6
V
CC
1 = V
AGC
= 0 V
No Singnal
Measurement
Cuicuit6
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS 17
µ
PC3220GR
−AGC Amplifier Block + Mixer Block−
VOLTAGE GAIN vs.
RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
35
30
25
20
15
10
5
0
–5
–10
–15
–20
RF Input Frequency Range f
RF
(MHz)
0 50 100 150 200 250
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
VOLTAGE GAIN vs.
RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
RF Input Frequency Range f
RF
(MHz)
0 50 100 150 200 250
V
CC
1 = 5.5 V
5.0 V
4.5 V
VOLTAGE GAIN vs.
RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
RF Input Frequency Range f
RF
(MHz)
0 50 100 150 200 250
V
CC
1 = 5.5 V
5.0 V
4.5 V
V
AGC
= 1.5 V
P
in
= –50 dBm
f
LO
=
60 to 290 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
V
AGC
= 3.0 V
P
in
= –50 dBm
f
LO
=
60 to 290 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
V
AGC
= 1.5 V
V
CC
= 5.0 V
P
in
= –50 dBm
f
LO
=
60 to 290 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
VOLTAGE GAIN vs.
RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
RF Input Frequency Range f
RF
(MHz)
0 50 100 150 200 250
V
AGC
= 0.5 V
P
in
= –20 dBm
f
LO
=
60 to 290 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
V
CC
1 = 4.5 V
5.0 V
5.5 V
VOLTAGE GAIN vs.
RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
35
30
25
20
15
10
5
0
–5
–10
–15
–20
RF Input Frequency Range f
RF
(MHz)
0 50 100 150 200 250
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
V
AGC
= 3.0 V
V
CC
= 5.0 V
P
in
= –50 dBm
f
LO
=
60 to 290 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
VOLTAGE GAIN vs.
RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
35
30
25
20
15
10
5
0
–5
–10
–15
–20
RF Input Frequency Range f
RF
(MHz)
0 50 100 150 200 250
T
A
= –40°C
T
A
= +85°C
T
A
= +25°C
V
AGC
= 0.5 V
V
CC
= 5.0 V
P
in
= –20 dBm
f
LO
=
60 to 290 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS
18
µ
PC3220GR
VOLTAGE GAIN vs.
IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
35
30
25
20
15
10
5
0
–5
–10
–15
–20
IF Output Frequency Range fIF (MHz)
020 60
80 140 160
VOLTAGE GAIN vs.
IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
35
30
25
20
15
10
5
0
–5
–10
–15
–20
IF Output Frequency Range fIF (MHz)
02040 100 140 160
TA = +25°C
VOLTAGE GAIN vs.
IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
35
30
25
20
15
10
5
0
–5
–10
–15
–20
IF Output Frequency Range fIF (MHz)
020 60 120 140 160
12060 80
TA = –40°C
100
8040
TA = –40°C
TA = +25°C
TA = +85°C
TA = +85°C
40 100 120
TA = +85°CTA = +25°C
TA = –40°C
VOLTAGE GAIN vs.
IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
IF Output Frequency Range fIF (MHz)
020 60 100 140 160
40 80 120
VCC1 = 5.5 V
5.0 V
4.5 V
VOLTAGE GAIN vs.
IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
IF Output Frequency Range fIF (MHz)
020 60 100 140 160
40 80 120
VCC1 = 4.5 V
5.0 V
5.5 V
VOLTAGE GAIN vs.
IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
IF Output Frequency Range fIF (MHz)
020 60 100 140 160
40 80 120
VCC1 = 4.5 V
5.0 V
5.5 V
VAGC = 0.5 V
Pin = –20 dBm
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit1
VAGC = 1.5 V
Pin = –50 dBm
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit1
VAGC = 3.0 V
Pin = –50 dBm
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit1
VAGC = 0.5 V
VCC1 = 5.0 V
Pin = –20 dBm
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit1
VAGC = 1.5 V
VCC1 = 5.0 V
Pin = –50 dBm
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit1
VAGC = 3.0 V
VCC1 = 5.0 V
Pin = –50 dBm
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit1
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS 19
µ
PC3220GR
VOLTAGE GAIN vs.
GAIN CONTROL VOLTAGE RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
–20
Gain Control Voltage Range V
AGC
(V)
0 0.5 1.5 3.0 3.5
f
RF
= 84 MHz
P
in
= –50 dBm
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
1.0 2.0 2.5
V
CC
1 = 4.5 V
5.0 V
5.5 V
VOLTAGE GAIN vs.
GAIN CONTROL VOLTAGE RANGE
Voltage Gain (dB)
40
35
30
25
20
15
10
5
0
–5
–10
–15
–20
Gain Control Voltage Range V
AGC
(V)
0 0.5 1.5 3.0 3.5
1.0 2.0 2.5
T
A
= –40°C
+25°C
+85°C
NOISE FIGURE vs.
GAIN CONTROL VOLTAGE RANGE
Noise Figure NF (dB)
Gain Control Voltage Range V
AGC
(V)
35
30
25
20
15
10
5
0
1.0 1.5 3.0 3.5
2.0 2.5
V
CC
1 = 5.5 V
5.0 V
4.5 V
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit2
NOISE FIGURE vs.
GAIN CONTROL VOLTAGE RANGE
Noise Figure NF (dB)
Gain Control Voltage Range V
AGC
(V)
35
30
25
20
15
10
5
0
1.0 1.5 3.0 3.5
2.0 2.5
T
A
= +85°C
+25°C
–40°C
V
CC
1 = 5.0 V
f
RF
= 84 MHz
P
in
= –50 dBm
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit1
V
CC
1 = 5.0 V
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50 MHz
Measurement Cuicuit2
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS
20
µ
PC3220GR
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(50 Ω/1 050 Ω) (dBm)
–15
–20
–25
–30
–35
–40
–45
–50
–55
Input Power Pin (dBm)
–55 –50 –40 –20 –15
–45 –30 –25
VCC1 = 5.5 V
5.0 V
4.5 V
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–100
–60 –50 –20
–40 –30
VAGC = 3.0 V
fRF1 = 84 MHz
fRF2 = 85 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50, 49 MHz
Measurement Cuicuit1
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
–35
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(50 Ω/1 050 Ω) (dBm)
–15
–20
–25
–30
–35
–40
–45
–50
–55
Input Power Pin (dBm)
–55 –50 –40 –20 –15
–45 –30 –25
TA = +25°C
–35
–40°C
+85°C
VAGC = 3.0 V
fRF
=
84 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50 MHz
Measurement Cuicuit1
VCC1 = 4.5 V
5.0 V
5.5 V
–20
–30
–40
–50
–60
–70
–80
–90
–100
–60 –50 –20
–40 –30
TA = –40°C
+25°C
+85°C
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–100
–50 –40 –10
–30 –20
VAGC = 2.1 V
fRF1 = 84 MHz
fRF2 = 85 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50, 49 MHz
Measurement Cuicuit1
VCC1 = 4.5 V
5.0 V
5.5 V
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–100
–50 –40 –10
–30 –20
VCC1 = 5.0 V
VAGC = 3.0 V
fRF
=
84 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50 MHz
Measurement Cuicuit1
VCC1 = 5.0 V
VAGC = 3.0 V
fRF1 = 84 MHz
fRF2 = 85 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50, 49 MHz
Measurement Cuicuit1
TA = –40°C
+25°C
+85°C
VCC1 = 5.0 V
VAGC = 2.1 V
fRF1 = 84 MHz
fRF2 = 85 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50, 49 MHz
Measurement Cuicuit1
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS 21
µ
PC3220GR
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–100
–30 –20 10
–10 0
V
AGC
= 0.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit1
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
V
CC
1 = 4.5 V
5.0 V
5.5 V
–20
–30
–40
–50
–60
–70
–80
–90
–100
–30 –20 10
–10 0
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–100
–30 –20 10
–10 0
V
AGC
= 1.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit1
V
CC
1 = 4.5 V
5.0 V
5.5 V
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–100
–30 –20 10
–10 0
T
A
= –40°C
+25°C
+85°C
V
CC
1 = 5.0 V
V
AGC
= 1.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit1
T
A
= –40°C
+25°C
+85°C
V
CC
1 = 5.0 V
V
AGC
= 0.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit1
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS
22
µ
PC3220GR
−Video Amplifier Block−
VOLTAGE GAIN (SINGLE-ENDED)
vs. INPUT FREQUENCY
Voltage Gain (Single-ended) (dB)
Input Frequency fin (MHz)
50
49
48
47
46
45
44
43
42
41
40
10 100
50
VCC2 = 4.5 V
5.0 V
5.5 V
VOLTAGE GAIN (SINGLE-ENDED)
vs. INPUT FREQUENCY
Voltage Gain (Single-ended) (dB)
Input Frequency fin (MHz)
50
49
48
47
46
45
44
43
42
41
40
10 100
50
TA = –40°C
+25°C
+85°C
VCC2 = 5 V
Pin
=
–55 dBm
Measurement Cuicuit4
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
0
–5
–10
–15
–20
–25
–30
–35
–40
–50 –45 –15
–25 –20
fIF = 50 MHz
Measurement Cuicuit4
VCC2 = 4.5 V
5.0 V
5.5 V
–40 –35 –30
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
0
–5
–10
–15
–20
–25
–30
–35
–40
–50 –45 –15
–25 –20
VCC2 = 5 V
fIF = 50 MHz
Measurement Cuicuit4
TA = –40°C
+25°C
+85°C
–40 –35 –30
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–60 –20
–30
fIF1 = 50 MHz
fIF2 = 49 MHz
Measurement Cuicuit4
VCC2 = 4.5 V
5.0 V
5.5 V
–50 –40
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–90
–60 –20
–30
VCC2 = 5 V
fIF1 = 50 MHz
fIF2 = 49 MHz
Measurement Cuicuit4
TA = –40°C
+25°C
+85°C
–50 –40
Pin
=
–55 dBm
Measurement Cuicuit4
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS 23
µ
PC3220GR
−Total Block−
VOLTAGE GAIN
vs. RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
RF Input Frequency Range fRF (MHz)
80
70
60
50
40
30
20
10
00 250
50
VCC1, 2 = 4.5 V
5.0 V
5.5 V
100 150 200
VOLTAGE GAIN
vs. RF INPUT FREQUENCY RANGE
Voltage Gain (dB)
RF Input Frequency Range fRF (MHz)
80
70
60
50
40
30
20
10
00 250
50
TA = –40°C
+25°C
+85°C
100 150 200
VCC1, 2 = 5 V
fLO =
60 to 290 MHz
VAGC = 3.0 V (Pin = –70 dBm)
VAGC = 1.5 V (Pin = –40 dBm)
VAGC = 0.5 V (Pin = –40 dBm)
VAGC = 3.0 V (Pin = –70 dBm)
VAGC = 1.5 V (Pin = –40 dBm)
VAGC = 0.5 V (Pin = –40 dBm)
VOLTAGE GAIN
vs. IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
IF Output Frequency Range fIF (MHz)
80
70
60
50
40
30
20
100 160
20
VCC1, 2 = 4.5 V
5.0 V
5.5 V
100 120 140
VOLTAGE GAIN
vs. IF OUTPUT FREQUENCY RANGE
Voltage Gain (dB)
IF Output Frequency Range fIF (MHz)
80
70
60
50
40
30
20
10
00 160
20
TA = –40°C
+25°C
+85°C
60 100 140
VCC1, 2 = 5 V
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
VAGC = 3.0 V (Pin = –70 dBm)
VAGC = 1.5 V (Pin = –40 dBm)
VAGC = 0.5 V (Pin = –40 dBm)
VAGC = 3.0 V (Pin = –70 dBm)
VAGC = 1.5 V (Pin = –40 dBm)
VAGC = 0.5 V (Pin = –40 dBm)
40 60 80
VOLTAGE GAIN
vs. GAIN CONTROL VOLTAGE RANGE
Voltage Gain (dB)
75
70
65
60
55
50
45
40
35
30
25
20
Gain Control Voltage Range VAGC (V)
0 0.5 1.5 3.0 3.5
fRF
=
84 MHz
Pin = –70 dBm
fLO = 134 MHz
PLO = –15 dBm
Measurement Cuicuit6
1.0 2.0 2.5
VCC1, 2 = 4.5 V
5.0 V
5.5 V
Voltage Gain (dB)
70
65
60
55
50
45
40
35
30
25
20
15
Gain Control Voltage Range VAGC (V)
0 0.5 1.5 3.0 3.5
VCC1, 2 = 5 V
fRF
=
84 MHz
Pin = –70 dBm
fLO = 134 MHz
PLO = –15 dBm
Measurement Cuicuit6
1.0 2.0 2.5
TA = –40°C
+25°C
+85°C
40 80 120
fLO =
60 to 290 MHz
PLO = –15 dBm
fIF = 50 MHz
Measurement Cuicuit6
PLO = –15 dBm
fIF = 50 MHz
Measurement Cuicuit6
fLO =
94 to 234 MHz
PLO = –15 dBm
fRF = 84 MHz
Measurement Cuicuit6
Measurement Cuicuit6
VOLTAGE GAIN
vs. GAIN CONTROL VOLTAGE RANGE
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS
24
µ
PC3220GR
NOISE FIGURE vs.
GAIN CONTROL VOLTAGE RANGE
Noise Figure NF (dB)
35
30
25
20
15
10
5
0
Gain Control Voltage Range VAGC (V)
1.0 1.5 3.0 3.5
fIF
=
50 MHz
fLO = 134 MHz
PLO = –15 dBm
Measurement Cuicuit7
2.0 2.5
VCC1, 2 = 4.5 V
5.0 V
5.5 V
NOISE FIGURE vs.
GAIN CONTROL VOLTAGE RANGE
Noise Figure NF (dB)
35
30
25
20
15
10
5
0
Gain Control Voltage Range VAGC (V)
1.0 1.5 3.0 3.5
VCC1, 2 =
5 V
fIF
=
50 MHz
fLO = 134 MHz
PLO = –15 dBm
Measurement Cuicuit7
2.0 2.5
TA = –40°C
+25°C
+85°C
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(50 Ω/1 050 Ω) (dBm)
0
–5
–10
–15
–20
–25
–30
–35
–40
Input Power Pin (dBm)
–75 –70 –60 –40 –35
–65 –50 –45
VCC1, 2 = 5.5 V
5.0 V
4.5 V
–55
VAGC = 3.0 V
fRF
=
84 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50 MHz
Measurement Cuicuit6
OUTPUT POWER vs. INPUT POWER
Output Power P
out
(50 Ω/1 050 Ω) (dBm)
0
–5
–10
–15
–20
–25
–30
–35
–40
Input Power Pin (dBm)
–75 –70 –60 –40 –35
–65 –50 –45
TA = +25°C
–55
–40°C
+85°C
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–80 –70 –40
–60 –50
VAGC = 3.0 V
fRF1 = 84 MHz
fRF2 = 85 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50, 49 MHz
Measurement Cuicuit6
VCC1, 2 = 4.5 V
5.0 V
5.5 V
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power P
out
(50 Ω/1 050 Ω) (dBm)
Input Power Pin (dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–80 –70 –40
–60 –50
VCC1, 2 = 5.0 V
VAGC = 3.0 V
fRF1 = 84 MHz
fRF2 = 85 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50, 49 MHz
Measurement Cuicuit6
TA = –40°C
+25°C
+85°C
VCC1, 2 = 5.0 V
VAGC = 3.0 V
fRF
=
84 MHz
fLO = 134 MHz
PLO = –15 dBm
fIF = 50 MHz
Measurement Cuicuit6
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS 25
µ
PC3220GR
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–50 –40 –10
–30 –20
V
AGC
= 1.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit6
V
CC
1, 2 = 4.5 V
5.0 V
5.5 V
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–50 –40 –10
–30 –20
V
CC
1, 2 = 5 V
V
AGC
= 1.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit6
T
A
= –40°C
+25°C
+85°C
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–35 –25 5
–15 –5
V
AGC
= 0.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit6
V
CC
1, 2 = 4.5 V
5.0 V
5.5 V
2 TONE OUTPUT POWER
vs. INPUT POWER
2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
0
–10
–20
–30
–40
–50
–60
–70
–80
–35 –25 5
–15 –5
V
CC
1, 2 = 5.0 V
V
AGC
= 0.5 V
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
Measurement Cuicuit6
T
A
= –40°C
+25°C
+85°C
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS
26
µ
PC3220GR
IM
3
, 2 TONE OUTPUT POWER,
GAIN CONTROL VOLTAGE vs. INPUT POWER
2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–80 –60 0
–40 –20
Conditions
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
@V
out
= 0.7 V
p-p
/tone
Measurement Cuicuit6
V
CC
1, 2 = 4.5 V
5.0 V
5.5 V
Gain Control Voltage Range V
AGC
(V)
–70 –50 –30 –10
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
IM
3
, 2 TONE OUTPUT POWER,
GAIN CONTROL VOLTAGE vs. INPUT POWER
2 tone Output Power Pout (50 Ω/1 050 Ω) (dBm)
Input Power P
in
(dBm)
–20
–30
–40
–50
–60
–70
–80
–90
–80 –60 0
–40 –20
T
A
= –40°C
+25°C
+85°C
–70 –50 –30 –10
Gain Control Voltage Range V
AGC
(V)
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
V
AGC
P
out
3rd Order Intermoduration Distortion IM
3
(dBc)
3rd Order Intermoduration Distortion IM
3
(dBc)
IM
3
V
AGC
P
out
IM
3
Conditions
f
RF
1 = 84 MHz
f
RF
2 = 85 MHz
f
LO
= 134 MHz
P
LO
= –15 dBm
f
IF
= 50, 49 MHz
@V
out
= 0.7 V
p-p
/tone
Measurement Cuicuit6
Remark The graphs indicate nominal characteristics.
Data Sheet PU10165EJ05V0DS 27
µ
PC3220GR
S-PARAMETERS
−AGC Amplifier Block + Mixer Block− (VCC1 = 5.0 V, VAGC = 3.0 V, by measurement circuit 3)
MIXER RF Input Impedance
1 : 30 MHz 1.830 kΩ–1.603 kΩ3.309 pF
2 : 84 MHz 443.0 Ω–1.096 kΩ1.730 pF
3 : 150 MHz 207.4 Ω–728.7 Ω1.456 pF
4 : 250 MHz 109.7 Ω–454.1 Ω1.402 pF
3
2
1
4
MIXER IF Output Impedance
1 : 10 MHz 29.48 Ω634.6 mΩ10.07 nH
2 : 36 MHz 29.98 Ω1.908 Ω8.431 nH
3 : 50 MHz 30.17 Ω2.476 Ω7.884 nH
4 : 100 MHz 30.79 Ω4.171 Ω6.638 nH
3
2
14
Data Sheet PU10165EJ05V0DS
28
µ
PC3220GR
MIXER OSC Input Impedance
Data Sheet PU10165EJ05V0DS 29
µ
PC3220GR
1 : 30 MHz 1.820 kΩ–1.823 kΩ2.911 pF
2 : 100 MHz 415.5 Ω–1.010 Ω1.575 pF
3 : 134 MHz 284.6 Ω–813.1 Ω1.461 pF
4 : 250 MHz 133.4 Ω–487.0 Ω1.307 pF
3
2
1
4
−Video Amplifier Block− (VCC2 = 5.0 V, by measurement circuit 5)
Video Amplifier Input Impedance
32
1
4
1 : 10 MHz 1.187 kΩ–1.177 kΩ13.54 pF
2 : 36 MHz 389.8 Ω–588.3 Ω7.516 pF
3 : 50 MHz 333.4 Ω–481.1 Ω6.617 pF
4 : 100 MHz 245.5 Ω–369.7 Ω4.304 pF
Video Amplifier Output Impedance
3
2
14
1 : 10 MHz 10.04 Ω5.225 Ω83.16 nH
2 : 36 MHz 15.86 Ω17.70 Ω78.25 nH
3 : 50 MHz 21.54 Ω22.61 Ω71.96 nH
4 : 100 MHz 45.48 Ω23.89 Ω38.02 nH
Data Sheet PU10165EJ05V0DS
30
µ
PC3220GR
PACKAGE DIMENSIONS
16-PIN PLASTIC SSOP (5.72 mm (225)) (UNIT: mm)
detail of lead end
5˚± 5˚
16 9
18
5.2±0.3
6.4±0.2
4.4±0.2
0.5±0.2
1.0±0.2
0.17
+0.08
–0.07
0.10 S
1.8 MAX.
1.5±0.1
0.475 MAX.
S
0.22
+0.10
–0.05
0.125±0.075
0.10 M
0.65
Data Sheet PU10165EJ05V0DS 31
µ
PC3220GR
NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
All the ground pins must be connected together with wide ground pattern to decrease impedance difference.
(3) The bypass capacitor should be attached to VCC line.
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Soldering Conditions Condition Symbol
Infrared Reflow Peak temperature (package surface temperature) : 260°C or below
Time at peak temperature : 10 seconds or less
Time at temperature of 220°C or higher : 60 seconds or less
Preheating time at 120 to 180°C : 120±30 seconds
Maximum number of reflow processes : 3 times
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
IR260
Wave Soldering Peak temperature (molten solder temperature) : 260°C or below
Time at peak temperature : 10 seconds or less
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes : 1 time
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
WS260
Partial Heating Peak temperature (pin temperature) : 350°C or below
Soldering time (per side of device) : 3 seconds or less
Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below
HS350
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PU10165EJ05V0DS
32
µ
PC3220GR
When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority
having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license.
M8E 00. 4 - 0110
The information in this document is current as of January, 2005. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or
data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all
products and/or types are available in every country. Please check with an NEC sales representative
for availability and additional information.
No part of this document may be copied or reproduced in any form or by any means without prior
written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.
NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of
third parties by or arising from the use of NEC semiconductor products listed in this document or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted under any
patents, copyrights or other intellectual property rights of NEC or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of customer's equipment shall be done under the full
responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third
parties arising from the use of these circuits, software and information.
While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize
risks of damage to property or injury (including death) to persons arising from defects in NEC
semiconductor products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment, and anti-failure features.
NEC semiconductor products are classified into the following three quality grades:
"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products
developed based on a customer-designated "quality assurance program" for a specific application. The
recommended applications of a semiconductor product depend on its quality grade, as indicated below.
Customers must check the quality grade of each semiconductor product before using it in a particular
application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support)
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's
data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not
intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness
to support a given application.
(Note)
(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.
and also includes its majority-owned subsidiaries.
(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for
NEC (as defined above).
•
•
•
•
•
•
Data Sheet PU10165EJ05V0DS 33
µ
PC3220GR
NEC Compound Semiconductor Devices Hong Kong Limited
E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)
Hong Kong Head Office
Taipei Branch Office
Korea Branch Office
TEL: +852-3107-7303
TEL: +886-2-8712-0478
TEL: +82-2-558-2120
FAX: +852-3107-7309
FAX: +886-2-2545-3859
FAX: +82-2-558-5209
NEC Electronics (Europe) GmbH http://www.ee.nec.de/
TEL: +49-211-6503-0 FAX: +49-211-6503-1327
California Eastern Laboratories, Inc. http://www.cel.com/
TEL: +1-408-988-3500 FAX: +1-408-988-0279
0406
NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/
E-mail: salesinfo@ml.ncsd.necel.com (sales and general)
techinfo@ml.ncsd.necel.com (technical)
Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579
For further information, please contact
µ
PC3220GR
