1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Approvals: ENEC, UL, cUL, CQC
• X2 CLASS (IEC 60384-14)
• Rated voltage: 275 VAC 50/60 Hz
• Capacitance range: 0.01 – 10 µF
• Lead spacing: 10.0 – 37.5 mm
• Capacitance tolerance: ±20%, ±10%
• Climatic category 40/110/56, IEC 60068-1
• Tape & Reel in accordance with IEC 60286-2
• RoHS compliant and lead-free terminations
• Operatingtemperaturerangeof−40°Cto+110°C
• 100% screening factory test at 2,200 VDC/1,500 VAC
• Self healing properties
Overview
The R46 Series is constructed of metallized polypropylene
lmencapsulatedwithself-extinguishingresininaboxof
material that meets the requirements of UL 94 V–0.
Applications
For worldwide use in electromagnetic interference (EMI)
suppression in across-the-line applications that require X2
safetyclassication.Intendedforuseinsituationsinwhich
capacitorfailurewouldnotresultinexposuretoelectric
shock. Not for use in "series with mains" type applications.
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Part Number System
R46 K I 2100 00 01 M
Series Rated Voltage
(VAC)
Lead Spacing
(mm)
Capacitance
Code (pF) Packaging Internal Use Capacitance
Tolerance
X2, Metallized
Polypropylene
K = 275 F = 10.0
I = 15.0
N = 22.5
R = 27.5
W = 37.5
The last three
digits represent
signicantgures.
Therstdigit
speciesnumber
ofzerostobe
added.
See Ordering
OptionsTable
01
02
L2
M1
M2
N0
N1
N2
K = ±10%
M = ±20%
Click image above for interactive 3D content
Open PDF in Adobe Reader for full functionality
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Ordering Options Table
Lead Spacing
Nominal
(mm)
Type of Leads and Packaging Lead Length
(mm)
Lead and
Packaging
Code
10
15
22.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/-0
00
Ammo Pack
H0 = 18.5 ±0.5
DQ
Other Lead and Packaging Options
Tape & Reel (Large Reel) H
0
= 18.5 ±0.5 CK
Bulk (Bag) – Short Leads 2.7+0.5/−0 JA
Bulk (Bag) – Short Leads 3.5+0.5/−0 JB
Bulk (Bag) – Short Leads 4.0+0.5/−0 JE
Bulk (Bag) – Short Leads 3.2+0.3/−0.2 JH
Bulk (Bag) – Long Leads 18 ±1 JM
Bulk (Bag) – Long Leads 30+5/−0 40
Bulk (Bag) – Long Leads 25+2/−1 50
Bulk (Bag) – Insulated Rigid Leads 30+5/−0(sp8±2) 51
Bulk(Bag)–InsulatedFlexibleLeads 150 ±5 (sp 8 ±2) 52
27.5
Standard Lead and Packaging Options
Bulk (Bag) – Short Leads
4+2/−0
00
Tape & Reel (Large Reel)
H0= 18.5 ±0.5
CK
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
2.7+0.5/−0
JA
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Short Leads
4.0+0.5/−0
JE
Bulk (Tray) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Tray) – Long Leads
18 ±1
JM
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
Bulk (Bag) – Insulated Rigid Leads
30+5/−0(sp8±2)
51
Bulk(Bag)–InsulatedFlexibleLeads
150 ±5 (sp 8 ±2)
52
37.5
Standard Lead and Packaging Options
Bulk (Tray) – Short Leads
4+2/−0
00
Other Lead and Packaging Options
Bulk (Tray) – Short Leads
2.7+0.5/−0
JA
Bulk (Tray) – Short Leads
3.5+0.5/−0
JB
Bulk (Tray) – Short Leads
4.0+0.5/−0
JE
Bulk (Tray) – Short Leads
3.2+0.3/−0.2
JH
Bulk (Tray) – Long Leads
18 ±1
JM
Bulk (Tray) – Long Leads
30+5/−0
40
Bulk (Tray) – Long Leads
25+2/−1
50
Bulk (Bag) – Insulated Rigid Leads
30+5/−0(sp8±2)
51
Bulk(Bag)–InsulatedFlexibleLeads
150 ±5 (sp 8 ±2)
52
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Dimensions – Millimeters
H
p ±0.4
LL
Ød
L B
FRONT VIEW SIDE VIEW
L B
H
8 ±2
35 +0/−5
Ød
Loose Insulated Rigid Leads
FRONT VIEW SIDE VIEW
L B
H
8 ±2
150 ±5
Insulated Flexible Leads 0.5 mm2
FRONT VIEW SIDE VIEW
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
10.0
±0.4
4.0
+0.2
9.0
+0.1
13.0
+0.2
0.6
±0.05
10.0
±0.4
5.0
+0.2
11.0
+0.1
13.0
+0.2
0.6
±0.05
10.0
±0.4
6.0
+0.2
12.0
+0.1
13.0
+0.2
0.6
±0.05
15.0
±0.4
5.0
+0.2
11.0
+0.1
18.0
+0.3
0.6
±0.05
15.0
±0.4
6.0
+0.2
12.0
+0.1
18.0
+0.3
0.6
±0.05
15.0
±0.4
6.0
+0.2
17.5
+0.1
18.0
+0.3
0.6
±0.05
15.0
±0.4
7.5
+0.2
13.5
+0.1
18.0
+0.5
0.6
±0.05
15.0
±0.4
7.5
+0.2
18.5
+0.1
18.0
+0.5
0.8
±0.05
15.0
±0.4
8.5
+0.2
14.5
+0.1
18.0
+0.5
0.6
±0.05
15.0
±0.4
9.0
+0.2
12.5
+0.1
18.0
+0.5
0.6
±0.05
15.0
±0.4
10.0
+0.2
16.0
+0.1
18.0
+0.5
0.8
±0.05
15.0
±0.4
11.0
+0.2
19.0
+0.1
18.0
+0.5
0.8
±0.05
15.0
±0.4
13.0
+0.2
12.0
+0.1
18.0
+0.5
0.8
±0.05
22.5
±0.4
6.0
+0.2
15.0
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
7.0
+0.2
16.0
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
10.0
+0.2
18.5
+0.1
26.5
+0.3
0.8
±0.05
22.5
±0.4
11.0
+0.2
20.0
+0.1
26.5
+0.3
0.8
±0.05
27.5
±0.4
9.0
+0.2
17.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
11.0
+0.2
20.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
13.0
+0.2
22.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
13.0
+0.2
25.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
14.0
+0.2
28.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
18.0
+0.2
33.0
+0.1
32.0
+0.3
0.8
±0.05
27.5
±0.4
22.0
+0.2
37.0
+0.1
32.0
+0.3
0.8
±0.05
Note: See Ordering Options Table for lead length (LL/H
) options.
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Dimensions – Millimeters cont'd
H
p ±0.4
LL
Ød
L B
FRONT VIEW SIDE VIEW
L B
H
8 ±2
35 +0/−5
Ød
Loose Insulated Rigid Leads
FRONT VIEW SIDE VIEW
L B
H
8 ±2
150 ±5
Insulated Flexible Leads 0.5 mm2
FRONT VIEW SIDE VIEW
p B H L d
Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance
37.5
±0.4
11.0
+0.3
22.0
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
13.0
+0.3
24.0
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
16.0
+0.3
28.5
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
19.0
+0.3
32.0
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
20.0
+0.3
40.0
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
24.0
+0.3
44.0
+0.1
41.5
+0.3
1.0
±0.05
37.5
±0.4
30.0
+0.3
45.0
+0.1
41.5
+0.3
1.0
±0.05
Note: See Ordering Options Table for lead length (LL/H
) options.
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Performance Characteristics
−40 −20 0
0
10
20
30
40
50
60
70
80
90
100
20
Temperature (°C)
Maximum Humidity in Storage Conditions
Relative Humidity (%)
40 60 80
30 Days
Annual Average
Dielectric Polypropylenelm
Plates Metallayerdepositedbyevaporationundervacuum
Winding Non-inductive type
Leads Tinned wire
Protection Plasticcase,thermosettingresinlled.BoxmaterialissolventresistantandameretardantaccordingtoUL94.
Related Documents IEC 60384–14, EN 60384–14
Rated Voltage VR275 VAC (50/60 Hz), 560 VDC
Capacitance Range 0.010 µF to 1 µF
Capacitance Values E6series(IEC60063)measuredat1kHzand+20±1°C
Capacitance Tolerance ±10%, ±20%
Temperature Range −40°Cto+125°C
Climatic Category 40/125/56 IEC 60068-1
Storage Conditions
Storagetime:≤24monthsfromthedatemarkedonthelabelpackage
Averagerelativehumidityperyear≤70%
RH≤85%for30daysrandomlydistributedthroughouttheyear
Dewisabsent
Temperature:−40to80°C(see"MaximumHumidityinStorageConditions"graphbelow)
Approvals ENEC, UL, cUL, CQC
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Performance Characteristics cont'd
Impedance Graph
100
Z[Ω]
0.1 1 10 100
F [MHz]
10
1
0.1
0.01
0.001
4.7 μF p.37.5 1 μF p.27.5
0.33 μF p.22.5
0.1 μF p.15
0.01 μF p.10
Dissipation Factor
(tanδ) ≤0.1%(0.06%*)at1kHz,+25°C±5°C(*typicalvalue)
Test Voltage Between
Terminals
The 100% screening factory test is carried out at 2,200 VDC/1,500 VAC. The voltage level is selected to meet the
requirementsinapplicableequipmentstandards.Allelectricalcharacteristicsarecheckedafterthetest.Thistest
cannotberepeated,asthereisariskofdamagingthecapacitor.KEMETisnotliableinsuchcasesforanyfailures.
Insulation Resistance
Measuredat+25°C±5°C,accordingtoIEC60384–2
Minimum Values Between Terminals
Voltage Charge Voltage Charge Time C≤0.33μF C>0.33μF
100 VDC 1 minute
≥1•10
5
MΩ
(≥5•10
5
MΩ)*
≥30,000MΩ•µF
(≥150,000MΩ•µF)*
In DC Applications Recommendedvoltage≤560VDC
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Environmental Test Data
Test IEC Publication Procedure
Endurance EN/IEC 60384–14
1.25xV
R
VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1
second, 1,000 hours at upper rated temperature
Vibration IEC 60068–2–6 Test Fc 3 directions at 2 hours each 10 – 55 Hz at 0.75 mm or 98 m/s2
Bump IEC60068–2–29TestEb 1,000bumpsat390m/s2
Change of Temperature IEC 60068–2–14 Test Na Upper and lower rated temperature 5 cycles
ActiveFlammability IEC 60384–14 VR+20surgepulsesat2.5kV(pulseevery5seconds)
PassiveFlammability IEC 60384–14 IEC60384–1,IEC60695–11–5Needleametest
Damp Heat Steady State IEC60068–2–78TestCab +40°Cand93%RH,56days
Approvals
Mark Specication File Number
EN/IEC 60384–14 V4413
UL 60384–14 and
CAN/CSA E60384–14
(310 VAC)
E97797
GB/T 14472
IEC 60384–14
CQC08001026549
CQC11001060118
CQC13001087757
CQC14001116028
CQC13001101266
CQC14001116000
Environmental Compliance
All KEMET EMI capacitors are RoHS compliant.
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Table 1 – Ratings & Part Number Reference
Capacitance
Value (µF)
Dimensions in mm Lead Spacing
(p)
dV/dt
(V/µs)
New KEMET
Part Number
Legacy Part
Number
B H L
0.010 4.0 9.0 13.0 10.0 500 46KF2100(1)N0(2) R46KF2100(1)N0(2)
0.015 4.0 9.0 13.0 10.0 500 46KF2150(1)N0(2) R46KF2150(1)N0(2)
0.022 4.0 9.0 13.0 10.0 500 46KF2220(1)N0(2) R46KF2220(1)N0(2)
0.033 5.0 11.0 13.0 10.0 500 46KF2330(1)M1(2) R46KF2330(1)M1(2)
0.047 5.0 11.0 13.0 10.0 500 46KF2470(1)N0(2) R46KF2470(1)N0(2)
0.068 6.0 12.0 13.0 10.0 500 46KF2680(1)M1(2) R46KF2680(1)M1(2)
0.10 6.0 12.0 13.0 10.0 500 46KF3100(1)M1(3) R46KF3100(1)M1(3)
0.010 5.0 11.0 18.0 15.0 400 46KI2100(1)01(2) R46KI2100(1)01(2)
0.015 5.0 11.0 18.0 15.0 400 46KI2150(1)01(2) R46KI2150(1)01(2)
0.022 5.0 11.0 18.0 15.0 400 46KI2220(1)01(2) R46KI2220(1)01(2)
0.033 5.0 11.0 18.0 15.0 400 46KI2330(1)01(2) R46KI2330(1)01(2)
0.047 5.0 11.0 18.0 15.0 400 46KI2470(1)01(2) R46KI2470(1)01(2)
0.068 5.0 11.0 18.0 15.0 400 46KI2680(1)01(2) R46KI2680(1)01(2)
0.10 5.0 11.0 18.0 15.0 400 46KI3100(1)M1(2) R46KI3100(1)M1(2)
0.15 6.0 12.0 18.0 15.0 400 46KI3150(1)M2(2) R46KI3150(1)M2(2)
0.15 9.0 12.5 18.0 15.0 400 46KI3150(1)L2(2) R46KI3150(1)L2(2)
0.22 7.5 13.5 18.0 15.0 400 46KI3220(1)M2(2) R46KI3220(1)M2(2)
0.22 9.0 12.5 18.0 15.0 400 46KI3220(1)L2(2) R46KI3220(1)L2(2)
0.22 6.0 17.5 18.0 15.0 400 46KI3220(1)02(2) R46KI3220(1)02(2)
0.33 8.5 14.5 18.0 15.0 400 46KI3330(1)N0(2) R46KI3330(1)N0(2)
0.33 10.0 16.0 18.0 15.0 400 46KI3330(1)M1(2) R46KI3330(1)M1(2)
0.33 9.0 12.5 18.0 15.0 400 46KI 3330(1)N1(3) R46KI3330(1)N1(3)
0.33 7.5 18.5 18.0 15.0 400 46KI3330(1)02(2) R46KI3330(1)02(2)
0.33 13.0 12.0 18.0 15.0 400 46KI3330(1)01(2) R46KI3330(1)01(2)
0.47 7.5 18.5 18.0 15.0 400 46KI3470(1)02(2) R46KI3470(1)02(2)
0.47 10.0 16.0 18.0 15.0 400 46KI3470(1)N0(3) R46KI3470(1)N0(3)
0.47 11.0 19.0 18.0 15.0 400 46KI3470(1)M1(2) R46KI3470(1)M1(2)
0.56 11.0 19.0 18.0 15.0 400 46KI3560(1)N0(2) R46KI3560(1)N0(2)
0.60 11.0 19.0 18.0 15.0 400 46KI3600(1)N0(2) R46KI3600(1)N0(2)
0.15 6.0 15.0 26.5 22.5 200 46KN3150(1)01(2) R46KN3150(1)01(2)
0.22 6.0 15.0 26.5 22.5 200 46KN3220(1)M1(2) R46KN3220(1)M1(2)
0.33 6.0 15.0 26.5 22.5 200 46KN3330(1)N0(2) R46KN3330(1)N0(2)
0.47 7.0 16.0 26.5 22.5 200 46KN3470(1)N0(2) R46KN3470(1)N0(2)
0.68 10.0 18.5 26.5 22.5 200 46KN3680(1)M2(2) R46KN3680(1)M2(2)
1.00 10.0 18.5 26.5 22.5 200 46KN4100(1)N2(3) R46KN4100(1)N2(3)
1.00 11.0 20.0 26.5 22.5 200 46KN4100(1)N1(2) R46KN4100(1)N1(2)
0.47 9.0 17.0 32.0 27.5 150 46KR3470(1)01(2) R46KR3470(1)01(2)
0.68 9.0 17.0 32.0 27.5 150 46KR3680(1)M1(2) R46KR3680(1)M1(2)
1.0 11.0 20.0 32.0 27.5 150 46KR4100(1)M1(2) R46KR4100(1)M1(2)
1.5 13.0 22.0 32.0 27.5 150 46KR4150(1)M1(2) R46KR4150(1)M1(2)
2.2 13.0 25.0 32.0 27.5 150 46KR4220(1)M2(2) R46KR4220(1)M2(2)
2.2 14.0 28.0 32.0 27.5 150 46KR4220(1)M1(2) R46KR4220(1)M1(2)
3.3 18.0 33.0 32.0 27.5 150 46KR4330(1)M2(2) R46KR4330(1)M2(2)
4.7 18.0 33.0 32.0 27.5 150 46KR4470(1)M2(2) R46KR4470(1)M2(2)
4.7 22.0 37.0 32.0 27.5 150 46KR4470(1)M1(2) R46KR4470(1)M1(2)
1.5 11.0 22.0 41.5 37.5 100 46KW4150(1)M1(2) R46KW4150(1)M1(2)
2.2 11.0 22.0 41.5 37.5 100 46KW4220(1)M2(3) R46KW4220(1)M2(3)
2.2 13.0 24.0 41.5 37.5 100 46KW4220(1)M1(2) R46KW4220(1)M1(2)
3.3 16.0 28.5 41.5 37.5 100 46KW4330(1)M1(2) R46KW4330(1)M1(2)
4.7 16.0 28.5 41.5 37.5 100 46KW4470(1)M2(3) R46KW4470(1)M2(3)
4.7 19.0 32.0 41.5 37.5 100 46KW4470(1)M1(2) R46KW4470(1)M1(2)
6.8 20.0 40.0 41.5 37.5 100 46KW4680(1)M2(2) R46KW4680(1)M2(2)
6.8 24.0 44.0 41.5 37.5 100 46KW4680(1)M1(2) R46KW4680(1)M1(2)
10.0 30.0 45.0 41.5 37.5 100 46KW5100(1)M1(2) R46KW5100(1)M1(2)
Capacitance Value (µF) B (mm) H (mm) L (mm) Lead
Spacing (p) dV/dt (V/µs) New KEMET
Part Number Legacy Part Number
(1) Insert lead and packaging code. See Ordering Options Table for available options.
(2) M = ±20%, K = ±10%
(3) M = ±20% (only available tolerance)
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Manual Soldering Recommendations
Following is the recommendation for manual
soldering with a soldering iron.
The soldering iron tip temperature should
besetat350°C(+10°Cmaximum),withthe
solderingdurationnottoexceedmorethan
3 seconds.
Recommended Soldering Temperature
0
50
100
150
200
250
300
350
400
01234567
8
Soldering time (seconds)
Soldering iron bit temperature (°C)
Soldering Process
The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys or SnCu alloys as primary
soldermaterial.Thishasincreasedtheliquidustemperaturefrom183°CforSnPbeutecticalloysto217–221°Cforthenew
alloys.Asaresult,theheatstresstothecomponents,eveninwavesoldering,hasincreasedconsiderablyduetohigherpre-
heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene
is160–170°C).Wavesolderingcanbedestructive,especiallyformechanicallysmallpolypropylenecapacitors(withlead
spacingof5–15mm).Greatcaremustbetakenduringsoldering.TherecommendedsolderprolesfromKEMETshouldbe
used.ConsultKEMETwithanyquestions.Ingeneral,thewavesolderingcurvefromIECPublication61760-1Edition2serves
as a solid guideline for successful soldering. See Figure 1.
Reowsolderingisnotrecommendedforthrough-holelmcapacitors.Exposingcapacitorstoasolderingproleinexcess
oftheabove-recommendedlimitsmayresulttodegradationoforpermanentdamagetothecapacitors.
Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components.
Insertthrough-holepartsaftercuringsurfacemountparts.ConsultKEMETtodiscusstheactualtemperatureprolein
theoven,ifthrough-holecomponentsmustpassthroughtheadhesivecuringprocess.Amaximumtwosolderingcycles
isrecommended.Allowtimeforthecapacitorsurfacetemperaturetoreturntonormaltemperaturebeforeperformingthe
second soldering cycle.
Wave Soldering Recommendations
0
50
100
150
200
250
300
0
40
80
120
160
200
240
Temperature (°C)
Time (s)
ca 2°C/second
ca 3.5°C/second typical
ca 5°C/second
Cooling
2 +3 seconds maximum
115 °C max
T
preheat
∆T < 150°C
100 °C
Preheating
Typical
First wave
Second wave
260°C
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Soldering Process cont'd
Wave Soldering Recommendations cont'd
1.Thetableindicatesthemaximumset-uptemperatureofthesolderingprocess.
Dielectric
Film Material
Maximum Preheat
Temperature
Maximum
Peak Soldering
Temperature
Capacitor
Pitch
≤10mm
Capacitor
Pitch
= 15 mm
Capacitor
Pitch
> 15 mm
Capacitor
Pitch
≤15mm
Capacitor
Pitch
> 15 mm
Polyester 130°C 130°C 130°C 270°C 270°C
Polypropylene 100°C 110°C 130°C 260°C 270°C
Paper 130°C 130°C 140°C 270°C 270°C
Polyphenylene
Sulphide 150°C 150°C 160°C 270°C 270°C
2.Themaximumtemperaturemeasuredinsidethecapacitor:setthetemperaturesothatthemaximumtemperatureinside
theelementisbelowthelimit.
Dielectric Film Material Maximum Temperature
Measured Inside the Element
Polyester 160°C
Polypropylene 110°C
Paper 160°C
Polyphenylene Sulphide 160°C
Temperature monitored inside the capacitor.
Selective Soldering Recommendations
Selectivedipsolderingisavariationofreowsoldering.Inthismethod,theprintedcircuitboardwiththrough-hole
componentstobesolderedispreheatedandtransportedoverthesolderbathasitisinnormalowsoldering,without
touchingthesolder.Whentheboardisoverthebath,itisstopped.Pre-designedsolderpotsareliftedfromthebathwith
moltensolder,onlyattheplacesoftheselectedcomponents,andpressedagainstthelowersurfaceoftheboardtosolder
the components.
Thetemperatureproleforselectivesolderingissimilartothedoublewaveowsolderingoutlinedinthisdocument.
However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of
overheatingisgreaterthanindoublewaveowsoldering,andgreatcaremustbetakensothatthepartsdonotoverheat.
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Construction
Detailed Cross Section
Self-Extinguishing
Resin
Molded Plastic
Case
Molded Plastic
Case
Leads
Metal Contact
Layer
Metal Contact
Layer
Margin
Single-sided Metallized
Polypropylene Film
(Second Layer)
Single-sided Metallized
Polypropylene Film
(First Layer)
Margin
Margin
Single-sided
Metallized
Polypropylene
Film
FILM WINDING SCHEME OPTIONS
1 Section
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided
Metallized
Polypropylene
Film
Single-sided Metallized Polypropylene Film
2 Sections
3 Sections 4 Sections
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
1 Section
Double-sided Metallized Polyester Film
3 Sections
Double-sided
Metallized
Polyester
Carrier
Film
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester
Carrier
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
4 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Polypropylene
Film Dielectric
1 Section
Polypropylene Film/Foil
2 Sections
Metal Foil Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metallized Polyphenyl-
ene Sulfide Film with
Vacuum-Evaporated
Aluminum Electrodes
1 Section
Metallized Polyphenylene
Sulfide Film (SMR)
Metallized
Impregnated
Paper
1 Section
Metallized Impregnated Paper
Single-sided
Metallized
Polyester
Film
1 Section
Single-sided Metallized Polyester Film
Polypropylene
Film Dielec-
tric
1 Section
AXIAL - Polypropylene Film/Foil
2 Sections
Metal Foil
Single-sided
Metallized
Polypropylene
Film
Polypropylene
Film Dielectric
Metal Foil
Single-sided
Metallized
Polypropylene
Film
2 Sections
Polypropylene
Film Dielectric
Double-sided
Metallized
Polyester Carrier
Film
Single-sided
Metallized
Polypropylene
Film
1 Section
AXIAL - Single-sided Metallized
Polypropylene Film
Single-sided
Metallized
Polyester
Film
1 Section
AXIAL - Single-sided Metallized
Polyester Film
AXIAL - Double-sided
Metallized Polyester Film
Winding Scheme
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Marking
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 10 mm
Manufacturer’s
Logo
Manufacturing
Plant
IEC Climatic
Category
Approval
Marks
TOPFRONT
Series
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
Manufacturer’s
Logo
Dielectric
Code Safety
Class Self
Healing
Passive
Flammability
Category Date Code
QA Number
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 15 mm, 22.5 mm (small case sizes)
Manufacturer’s
Logo
Passive Flammability
Category
Manufacturing
Plant
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Marking cont'd
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 10 mm
Manufacturer’s
Logo
Manufacturing
Plant
IEC Climatic
Category
Approval
Marks
TOPFRONT
Series
Capacitance,
Capacitance
Tolerance,
Rated Voltage
Manufacturing
Plant
Lead Spacing 22.5 mm (large case sizes), 27.5 mm, 37.5 mm
Manufacturer’s
Logo
Dielectric
Code Safety
Class Self
Healing
Passive
Flammability
Category Date Code
QA Number
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
IEC Climatic
Category
Approval
Marks
TOPFRONT
Lead Spacing 15 mm, 22.5 mm (small case sizes)
Manufacturer’s
Logo
Passive Flammability
Category
Manufacturing
Plant
Capacitance Tolerance
Date Code
Capacitance,
Rated Voltage
Series,
Dielectric
Code, Safety
Class, Self
Healing
Passive Flammability
Category:
B for volume ≥ 1750 mm3
C for volume < 1750 mm3
Manufacturing Date Code (IEC–60062)
Y = Year, Z = Month
Year Code Month Code
2000
M
January
1
2001
N
February
2
2002
P
March
3
2003
R
April
4
2004
S
May
5
2005
T
June
6
2006
U
July
7
2007
V
August
8
2008
W
September
9
2009
X
October
O
2010
A
November
N
2011
B
December
D
2012
C
2013
D
2014
E
2015
F
2016
H
2017
J
2018
K
2019
L
2020 M
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Packaging Quantities
Lead Spacing
(mm)
Thickness
(mm)
Height
(mm)
Length
(mm)
Bulk
Short Leads
Bulk
Long Leads
Standard
Reel
ø 355 mm
Large Reel
ø 500 mm
Ammo
Taped
10
4
9
13
2,000
1,800
750
1,500
1,000
5
11
13
1,300
1,500
600
1,250
800
6
12
13
1,000
1,200
500
1,000
680
15
5
11
18
2,000
1,000
600
1,250
800
6
12
18
1,750
900
500
1,000
680
6
17.5
18
1,000
700
500
1,000
680
7.5
13.5
18
1,000
700
350
800
500
7.5
18.5
18
900
500
–
800
500
8.5
14.5
18
1,000
500
300
700
440
9
12.5
18
1,000
520
270
650
410
10
16
18
750
500
300
600
380
11
19
18
450
350
–
500
340
13
12
18
750
490
200
480
280
22.5
6
15
26.5
805
500
–
700
464
7
16
26.5
700
500
–
550
380
10
18.5
26.5
396
300
–
350
235
11
20
26.5
360
250
–
350
217
27.5
9
17
32
816
408
–
450
–
11
20
32
560
336
–
350
–
13
22
32
480
288
–
300
–
13
25
32
480
288
–
–
–
14
28
32
352
176
–
–
–
18
33
32
256
128
–
–
–
22
37
32
168
112
–
–
–
37.5
11
22
41.5
420
252
–
–
–
13
24
41.5
360
216
–
–
–
16
28.5
41.5
216
108
–
–
–
19
32
41.5
192
96
–
–
–
20
40
41.5
126
84
–
–
–
24
44
41.5
108
72
–
–
–
30
45
41.5
90
60
–
–
–
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Lead Taping & Packaging (IEC 60286–2)
Taping Speci cation
Description Symbol
Dimensions (mm)
Lead Space
Tol.
10
15
22.5
27.5
Fig. 1
Fig. 2
Fig. 3
Fig. 3
Lead wire diameter d 0.6 0.6–0.8 0.8 0.8 ±0.05
Taping lead space P25.4 25.4 38.1 38.1 ±1
Feedholeleadspace* P
0
12.7 12.7 12.7 12.7 ±0.2**
Centering of the lead wire P
1
7.7 5.2 7.8 5.3 ±0.7
Centeringofthebody P
2
12.7 12.7 19.05 19.05 ±1.3
Leadspacing(pitch)*** F10 15 22.5 27.5 +0.6/−0.1
Component alignment ∆h 0000±2
Height of component
from tape center H0**** 18.5 18.5 18.5 18.5 ±0.5
Carrier tape width W18 18 18 18 +1/−0.5
Hold down tape width W
0
910 10 10 Minimum
Hole position W
1
9999±0.5
Hold down tape position W
2
3333Maximum
Feed hole diameter D
0
4444±0.2
Total tape thickness t0.7 0.7 0.7 0.7 ±0.2
* 15 mm also available
** Maximum of 1 mm on 20 lead spaces
*** Pitches 15 mm and 10 mm taped to 7.5 mm (crimped leads) available upon request
**** H0 = 16.5 mm is available upon request
P
P2
P0
F
H0
W
h
P1D0
W2
W1
W0
h
ød
P
P2
P1
Figure 1
Lead Spacing 10 mm
Figure 2
Lead Spacing 15 mm
Figure 3
Lead Spacing 22.5 – 27.5 mm
t
A-B
A B
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
Lead Taping & Packaging (IEC 60286–2) cont'd
Ammo Speci cations
Dimensions (mm)
H W T
360 340 59
Reel Speci cations
Reel Size Dimensions (mm)
D H W
Standard
355
30
55Maximum
Large
500
25
D
W
H
H
T
W
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard F3093_R46_X2_275_110C • 2/5/2019
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Metallized Polypropylene Film EMI Suppression Capacitors
R46 Series, Class X2, 275 VAC, 110°C
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven
hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any
technicaladviceinferredfromthisInformationorotherwiseprovidedbyKEMETwithreferencetotheuseofKEMET’sproductsisgivengratis,andKEMETassumes
noobligationorliabilityfortheadvicegivenorresultsobtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failuresmaystilloccur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Althoughallproduct–relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatother
measuresmaynotberequired.
KEMET is a registered trademark of KEMET Electronics Corporation.